Good day, thank you for standing by. Welcome to the ASML 2023 first quarter financial results conference call on April 19th, 2023. At this time, all participants are in a listen-only mode. After the speaker's introduction, there'll be a question and answer session. To ask a question during the session, you will need to press star one and one on your telephone. You will hear an automated message advising your hand is raised. To withdraw your question, please press star one and one again. Please be advised that today's conference is being recorded. I would now like to hand the conference call over to Mr. Skip Miller. Please go ahead.
Thank you, operator. Welcome, everyone. This is Skip Miller, Vice President of Investor Relations at ASML. Joining me today on the call are ASML CEO, Peter Wennink, and our CFO, Roger Dassen. The subject of today's call is ASML's 2023 first quarter results. The length of this call will be 60 minutes, and questions will be taken in the order that they are received. This call is also being broadcast live over the internet at asml.com. A transcript of management's opening remarks and a replay of the call will be available on our website shortly following the conclusion of this call. Before we begin, I'd like to caution listeners that comments made by management during this conference call will include forward-looking statements within the meaning of the federal securities laws. These forward-looking statements involve material risks and uncertainties.
For a discussion of risk factors, I encourage you to re-review the safe harbor statement contained in today's press release and presentation found on our website at asml.com and in ASML's annual report on Form 20-F and other documents as filed with the Securities and Exchange Commission. With that, I'd like to turn the call over to Peter Wennink for a brief introduction.
Thank you, Skip. Welcome everyone, and thank you for joining us for our first quarter 2023 results conference call. Before we begin the Q&A session, Roger and I would like to provide an overview and some commentary on the first quarter 2023, as well as provide our view of the coming quarters. Roger will start with a review of our first quarter 2023 financial performance with some added comments on our short-term outlook, and I will complete the introduction with some additional comments on the current business environment and on our future business outlook. Roger, if you want.
Thank you, Peter. Welcome everyone. I will first review the first quarter financial accomplishments, then provide guidance on the second quarter of 2023. Let me start with our first quarter accomplishments. Net sales came in at EUR 6.7 billion, which was above our guidance due to higher than expected EUV and DPV revenue from faster installation and earlier acceptance of systems in the quarter. We shipped nine EUV systems and recognized EUR 2.9 billion revenue from 17 systems this quarter. Net system sales were at EUR 5.3 billion, which was again driven by logic at 70%, with the remaining 30% coming from memory. Installed base management sales for the quarter came in at EUR 1.4 billion, which was lower than guided due to less upgrade revenue.
Gross margin for the quarter came in at 50.6%, which is above our guidance, primarily driven by additional EUV and DUV immersion revenue in the quarter, which more than outweighed the impact of lower than expected upgrade business. On operating expenses, R&D expenses came in at EUR 948 million, which was below our guidance, primarily due to exchange rate effects and some one-offs. SG&A expenses were EUR 260 million, also lower than guided, primarily due to lower IT spending and timing of headcount additions. Net income in Q1 was EUR 2 billion, representing 29% of net sales and resulting in an EPS of EUR 4.96. Turning to the balance sheet. We end the first quarter with cash equivalents and short-term investments at a level of EUR 6.7 billion. Moving to the order book.
Q1 net system bookings came in at EUR 3.8 billion, which is made up of EUR 1.6 billion for EUV bookings and EUR 2.2 billion for non-EUV bookings. These values also include inflation corrections. Net system bookings in the quarter were driven by logic with 79% of the bookings, while memory accounted for the remaining 21%. Bookings are lower than in previous quarters, which is not unexpected given the current environment, particularly taken into account our backlog at end of Q1 of around EUR 39 billion, which is almost two times this year's system sales. I would like to turn to our expectations for the second quarter of 2023. We expect Q2 net sales to be between EUR 6.5 billion and EUR 7 billion.
We expect our Q2 installed base management sales to be around EUR 1.3 billion. Gross margin for Q2 is expected to be between 50% and 51%. The expected R&D expenses for Q2 are around EUR 990 million. SG&A is expected to be around EUR 275 million. The higher R&D guidance is primarily due to investments in support of our continuous innovation as we further extend our product roadmaps and improve our install base performance. Higher SG&A is mainly due to additional headcount and associated infrastructure support. Our estimated 2023 annualized effective tax rate is expected to be between 15% and 16%. In Q1, ASML paid a quarterly interim dividend of EUR 1.37 per ordinary share.
Recognizing the three interim dividends of EUR 1.37 per ordinary share, each paid in 2022 and 2023, this leads to a final dividend proposal to the general meeting of EUR 1.69 per ordinary share. This will result in a total dividend for the year 2022 of EUR 5.80 per ordinary share, which is a 5.5% increase compared to 2021. In Q1, 2023, we purchased around 0.7 million shares for a total amount of around EUR 400 million. In the current uncertain market environment, it is prudent that we continue to manage higher levels of cash as the entire value chain will likely create some pressure on our free cash flow. With that, I would like to turn the call back over to Peter.
Thank you, Roger. As Roger has highlighted, we had a good first quarter above our guidance in a very dynamic environment. There continues to be a lot of uncertainty in the market due to a number of global macro concerns around inflation, rising interest rates, recession, and the geopolitical environment, including export controls. Customers continue to see demand weakness in consumer-driven end markets, causing the industry to actively reduce inventory and lower the utilization of their production base. While demand in other end markets such as automotive and industrial remains relatively strong. Specifically, memory customers are more aggressively lowering CapEx and are limiting wafer output to reduce inventory to more healthy levels. Logic customers are also moderating wafer output for some market segments, while demand continues to be strong in other markets, especially in markets requiring more mature nodes.
Despite this, both logic and memory customers are still following their technology roadmaps and continue making strategic technology investments. As a result of this market dynamic, we do see customers making adjustments to demand timing relative to last quarter. We also see other customers more than willing to absorb this demand change, particularly in DPV. For example, Chinese domestic customers focusing on mid critical and mature applications, which make up over 20% of our backlog at the end of Q1, are now expected to grow to a similar allocation of our system revenue this year. After taking these demand adjustments over the quarter into account, our systems demand still exceeds our capacity for this year, albeit by a smaller margin in the last quarter.
As a reference, during 2022, the demand for DPV was 50% higher than our build capacity, while this gradually reduced from 30% at the end of Q4 2022 to 20% at the end of Q1 2023. As Roger mentioned, we saw orders moderate in Q1 after several quarters of very strong bookings. A moderation in the rate at which customers are adding orders is to be expected in the current environment, especially considering the long period in which our backlog can cover shipments, which extends well beyond our normal order lead times. With regard to our total system capacity, we are still planning to ship around 60 EUV systems and around 375 DPV systems in 2023, with around 25% of the DPV systems being immersion.
We currently see no change in our full year outlook as provided last quarter. As a reminder, we expect EUV business growth to be around 40% over 2022, and non-EUV business growth of around 30%. For the install base business, we still expect year-over-year revenue growth of around 5%. In summary, based on our view today, we continue to expect a year of strong growth with a net sales increase of over 25% and a slight improvement in gross margin. To summarize, our short to medium-term business outlook is still very strong, supported by a backlog that represents almost two years of tool shipments, continuously pushing our output capacity to the maximum and further underpinning our plan to expand our capacity.
On the geopolitical front, as it relates to export controls, we're still waiting for the Dutch government to publish further details on the export control restrictions. These new export controls focus on advanced chip manufacturing technology. Due to these upcoming regulations, ASML will need to apply for export licenses for shipments of the most advanced immersion DPV systems. As we've said earlier, we interpret most advanced to pertain to TWINSCAN NXT:2000i and subsequent immersion systems. It will take some time for these controls to be translated into legislation and take effect. Based on the announcement last month, our expectation of the Dutch government's licensing policy, the current market developments, and the way we model our longer term scenarios, we do not expect a material effect on our 2023 financial outlook or on our longer term scenarios as announced during our Investor Day in November last year.
Despite the clear shorter-term cyclical concerns, the longer-term global mega trends we talked about at the Investor Day are broadening the application space and fueling demand for advanced and mature nodes. Secular growth drivers in semiconductor end markets and increasing lithography intensity on future technology nodes are driving demand for our products and services. In summary, while there is clear uncertainty in the current environment, our customers' demand for our products continues to exceed supply. We had a good start to the year, and based on our view today, we continue to expect another year of strong growth. ASML and its supply chain partners continue to work on the capacity ramp in support of our customers' demand, and we remain confident in our long-term growth opportunity. With that, we'll be happy to take your questions.
Thank you, Roger and Peter. The operator will instruct you momentarily on the protocol for the Q&A session.
Beforehand, I'd like to ask that you kindly limit yourself to one question with one short follow-up, if necessary. This will allow us to get to as many callers as possible. Operator, could we have your final instructions and then the first question, please?
Thank you. As a reminder, to ask a question, you will need to press star one and one on your telephone and wait for your name to be announced. To withdraw your question, please press star one and one again. We will now take your first question. One moment, please. Your first question comes from the line of Krish Sankar from TD Cowen. Please go ahead. Your line is open.
Yeah, hi. Thanks for taking my question. I have two of them. First one, Roger, you know, I understand your backlog is still pretty healthy, but the order run rate is definitely slowing. Kind of curious how to think about calendar 2024 relative to 2023. If the order run rate continues to decline, is there a risk that calendar 2024 could be flat to down year for you? I had a follow-up for Peter.
Well, let me, you know, reverse it. I will answer that question, and perhaps Roger can answer the second one.
Great.
Yeah, I think you asked the question on 2024. I think we already mentioned it. The backlog is particularly strong, which of course is the result of very strong order intake over the last couple of quarters. When we look at 2024, and we have our long-term discussion with our customers, the demand for 2024 clearly shows an increase in terms of tool shipments, and therefore sales, as compared to 2023. A significant part of that is already booked, and you could argue that the back half of the second half of next year still needs to be booked, and I'm pretty confident that that will come in the course of this year.
Although there are many uncertainties that we're currently seeing, that the rate of inflation, interest rates, the geopolitical situation, we believe we are not looking at a massive recession. While our customers, of course, are dealing with the current circumstances by very diligently reducing inventory, adjusting their utilization rates, and still very much planning for the demand for next year because they're building fabs. Those fabs are real and have to take tools. Not everything is booked yet for the 2024 demand. In our discussions, as I said before, we very clearly see an increase of the number of tools that are needed because of the technology transitions.
I also believe the confidence that our customers have in them very diligently working off inventory against a macroeconomic situation that doesn't look like a massive, you know, recession. That gives us the confidence with the fact that these new fabs are opening, that yes, 2024 will be an up year as compared to 2023. Yes, we have not booked all those orders. Yes, I strongly believe that those orders will come in in the course of this year. If you ask me an exact date like, you know, June 12, 2023, I cannot give you this, but it will happen. This is the way that we look at the world.
Got it. Very helpful, Peter. I definitely won't ask for a specific date. As a follow-up for either you or Roger, you know, clearly the cost of EUV is pretty high, and there have been some concerns that EUV intensity could slow down as you go beyon d 3nm. Already some customers are using a low-cost 3 nm version. I'm kind of curious how to think about EUV intensity as you go from 3 nm to 2 nm and beyond. Do you feel comfortable EUV layers are gonna increase, or do you think it kind of stagnates or saturates? Thank you.
Well, yeah, okay, I'll answer that, you know, also. I think I can best refer to because you're talking about long-term, you know, roadmap questions. I think we tried to answer that during our Investor Day, you know? I think it was very clear in our Investor Day, we gave you an overview of the little intensity going up. Yes, that is also driven by EUV. It is driven by EUV for two reasons. One, I think we will see throughout the rest of this decade a significant increase in EUV productivity, but also in the shrink by the introduction of High-NA. It's also to be a combination. What we are seeing today when we look at the chip designs, we see more EUV layers, not less.
That means that we see a EUV intensity going up, and that's just simply based on the very intense and deep discussions that we have with our customers' R&D people. That's also the basis for our capital markets presentation that we gave you last year. That still stands. What we said at that time is still relevant today.
Got it. Very clear, Peter. Thank you very much.
Thank you. We will now go to our next question. Your next question comes from the line of François Bouvignies from UBS. Please go ahead. Your line is open.
Hi. Thank you very much. I have two quick ones. The first one is on EUV demand, specifically, Peter. I mean, you mentioned in the video actually, Roger, some push-outs, but you reiterated the guidance for the full year. Obviously your strong backlog is supporting your 2023 revenues, and you said it's way, more than one full year revenues, your backlog. As net orders is weakening, I mean, how should we interpret the trend in EUV demand for 2024? As the backlog is normalizing, I mean, do you still expect EUV shipments to be up in 2024, especially given the visibility of two years you have for EUV specifically? Just trying to reconcile your push-out comments and EUV demand for 2024, given the long visibility.
Yes. When we talk about a demand push out, you need to understand, and I think we said it before many times during our quarterly calls, that the demand was far bigger than our build capacity. We can talk about a demand push out without affecting our build capacity, because the build capacity is lower than the demand. This is what is actually happening. Some of that, you know, demand that people wanted in 2023, they moved back to 2024. When we look at the year 2024 and we look at the demand picture, and I just refer to the answer I gave on the first question, the demand picture looks at an increase of our shipments next year, which is true for the company, it's also true for EUV.
I gave you the reasons, in the answer to the, you know, first question. Which is true for EUV, is even more true for DUV. Yeah. We had a significant overdemand in 2022, but now also in 2023, which is to a lesser extent. That buffer has actually shrunk, but it's the same situation. You can have demand changes which do not lead to output changes because the output capacity is so much lower. I think that is what you need to keep in your mind. I can only refer back to what I said in the answer to the first question.
We do pencil in the customer demand based on their expansion plans and based on what they believe their, you know, their production capacity needs next year, which is a function of how they think about the duration of this current downturn. Of course, if our customers start thinking about. That would be completely different, but they don't. They all think about, basically, work on diligently our inventory levels. We reduce the, you know, utilization to get a balance in supply and demand in, you know, the chip sector. That's what they're doing. That just points to a shorter-term, you know, situation than a longer-term situation, which means that they keep the 2024 demand on us as is.
Part of it still needs to be booked, like I said, and it's particularly what I would call the back half of the second half of next year. Those orders we need to book, but I'm pretty sure that we will book them. Both on DPV and EUV, we're both planning higher unit numbers.
Great. Thank you, Pieter. My follow-up is on China. I mean, you mentioned it's 20% of your backlog, so it would imply, you know, 45% of the DUV backlog is from China, if my math is correct, which would imply a significant, you know, share from China in DUV. How should we think about the sustainability and particularly the risk of pulling due to the geopolitical dynamics, if you see what I mean?
Yeah.
Beyond 2023?
Yeah. I think it's no surprise, and we've said it before, that the Chinese market is a market for mid-critical and mature semiconductors. Mid-critical and mature lithography systems. That's exactly what we are talking about. I say, you know, who needs all those semiconductors? You know, because there's a . I think your math is about right. Huh? That means that for our mid-critical and mature semiconductors, which are outside the realm of the export controls, because that's on advanced immersion, yeah? The demand for those semiconductors are significant. You know, in the discussions I've had with one of the Chinese end customers, which is not a semiconductor maker, it's a product maker, as a matter of fact, you know, they make electrical vehicles.
If you think about the increase of number of electrical vehicles that will be produced in three years, three to five years from, you know, now, you need multiple 28 nm and 45 nm fabs. Multiple. It's more than a handful. Those fabs are not there. They need to be built. Yeah? I think this is something people underestimate, how significant the demand in the mid-critical and the mature semiconductor space is. It will just grow double digit, whether it's automotive, whether it's the energy transition, whether it's just the entire industrial robotics area, whether those are the sensors that we, that we actually need as a, as an integral component of the, you know, AI systems. This is where the mid-critical and the mature semiconductor space is very important and needs to grow.
This is where China is very strong. Yeah. This is why, yeah, that could be 40%-50% of our DPV backlog. That's what it is.
Great. Thank you very much, Pieter.
Yeah.
Yeah.
Thanks.
Thanks. Yeah.
Thank you. We will now go to our next question. Your next question comes from the line of Amit Harchandani from Citi. Please go ahead. Your line is open.
Thank you. Hello, everyone. Amit Harchandani from Citi. Two questions, if I may. My first question is with regards to the logic end market. You've talked about some moderation there. Could you give us a sense for if anything there has changed in terms of discussions with customers? You talk about them sticking to their tech roadmaps. Do you see that as being uniform across customers? Do you see any variations? Just a sense of if you've seen anything change with respect to the logic end market. My second question is with regards to capital allocation.
I believe in the annual report, towards the end of the annual report, you have talked about your CapEx for this year being potentially EUR 2.4 billion, which would imply a capital intensity or a level that's higher than in the past, or certainly highest in the last 10, 15 years that I can remember. Could you give us a sense for whether that's a one-off, and how should we think about capital intensity and broader capital allocation out this year and beyond? Thank you.
Roger will take the second question. On the first question, what do we see in change of in the Logic end markets? What do we see in terms of change in roadmaps? I would say, the least change we see in the advanced roadmaps. I mean, it's very clear that whether it's the 3 nm or the 2 nm or the sub 2 nm roadmaps, those are very clearly defined. There's only very few players, you know. There's only two or three players that are actually three players that are actually looking into this. I don't think those roadmaps are changing.
I think they're pretty much the push that we get from the customers in that space is to keep our promises in terms of the shipment of the next generation litho tool to meet their, you know, roadmap introduction requirements. I don't see that's a major change there. What I do see a change, and it refers back to the previous question, I do see a change in the roadmaps for the mid critical and the mature systems. This is where I see customers that are in that space moving from mature to mid critical, from low mid critical to high mid critical. There you clearly see an acceleration of roadmaps. It's more in the mature space, the mature and the mid critical space than it is in the advanced space.
That is also driven by the things I just said. You know, is the whole EV transition is going to require a significant step-up in, let's say 20 nm, 28 nm and 45 nm capability. This is where is a big opportunity. You also see roadmaps addressing that opportunity. That's why we see in the logic space is the biggest change.
Amit, with regard to your second question, indeed, the EUR 2.4 billion number that you refer to for the full year, that's very much in line with the EUR 0.6 that you would see for this quarter. That's very much in line. What is in there? Well, obviously what is in there first and foremost is two things. It's the preparation for High NA, and it's the ongoing activity to increase our capacity to the 90 and the 600. On High NA, you know, part of what is in there is prototypes that we're building. We're building prototypes for High NA.
At a certain point in time, those prototypes will obviously also, you know, find their way or part of those prototypes will find their way into the market. At a certain point in time, there will be a bit of reversal in there. That's part of the fairly high number that you see in there. Other than that, there is a lot of construction work going on, you know, around the globe in order to accommodate the, you know, capacity expansion that we've talked about.
If you ask about, you know, what do you think in terms of, the, longer, you know, longer term, I think it is prudent to expect that, for the years through 2025, I think it's prudent to expect something between, I would say, EUR 1.5 billion-EUR 2 billion. In that neighborhood, I think it is prudent to assume that we're going to see these levels of CapEx, because, you know, those will be the years where we continue to build the capacity that we, that we have, talked about before.
Thank you, gentlemen.
Thank you. We will now go to our next question. The next question comes from the line of Alexander Peterc from Societe Generale. Please go ahead. Your line is open.
Yes, good afternoon, and thanks for taking my question. My first question will be more short-term, just on the systems mix into the second quarter versus the first quarter. You had a quite a high level of EUV in the first quarter in terms of recognition, you know, that is specifically. Do you expect a similar mix to prevail in the second quarter and then maybe reverse to more DPU in the second half? How should we think about it? I have a quick follow-up as well. Thank you.
Yeah, I think you're right. I think EUV was slightly over-represented in the first quarter. We've always talked about around 60 shipments for the year, so 17 is relatively higher than what you expect. I think it is realistic to assume that in the three quarters to come, that number will be slightly lower than the 17 that we have in revenue for Q1.
Thanks. The follow-up would be just on your higher gross cash requirements in the current environment or is there perhaps also higher working capital requirements. Could you maybe quantify what is the level of gross cash you will be comfortable in the current environment for the time being? That I assume is higher than the EUR 2.5 billion you previously mentioned. Or in other words, if you could put a number on the higher working capital is required, given the optimization of cash flow across the chain. Thanks.
Yeah, I mentioned two dynamics. One dynamic I mentioned is that, you know, everyone in the entire value chain is managing their cash flow levels, and obviously that means that, you know, also our free cash flow, you know, it might be a little bit under pressure. That's one dynamic. Indeed, the second dynamic that we talked about is that we believe it is appropriate in the current environment to sustain or to maintain higher levels of cash. You know, what do I think is realistic? I think, you know, the...
You look at the cash level at the end of this quarter, you look at the cash level that we had at the end of the previous quarter, you know, I would say that's those cash levels are definitely sufficient to, you know, to weather any uncertainties that might be there. So I think those cash levels, I think, are more than more than sufficient to, you know, to have the flexibility that we're looking for, more than sufficient.
Thank you.
Thank you. We will now go to the next question. Your next question comes from the line of Alexander Duval from Goldman Sachs. Please go ahead. Your line is open.
Yes. Hi, everyone. Thanks so much for the question. I think you talked about mid-single-digit growth in services revenue this year, and that's obviously understandable given hard comps last year. I wondered if you could give your thoughts on the extent to which there could be upside given lower machine utilization that you referenced, and that typically in the past, from memory, has led to higher upgrade activity. Secondly, a question we received from investors is just on average selling prices. You obviously talked about some weakening semi fundamentals, which you've characterized as being short term in nature. Just curious to what degree that could limit your ability to increase ASPs and offset some of those cost pressures you've talked about in recent quarters. Many thanks.
Yes. The upside on service, it's a good point. I mean, what you generally see is that while if there's an upturn, of course, we don't get the sufficient time to take down the machine and then do the upgrade, and then, you know, software upgrades are of course easier. Any prolonged down of a machine in an upturn is a disaster for a customer, so they don't wanna do that. You're absolutely right. In a downturn we do have that because the utilization goes down. Well, in the beginning of such a downturn, when the utilization goes, you know, down, budgets that customers are going to allocate to do the upgrades are also going to go down.
What you generally see, and this is why there's an upside in H2, if we're all right and we are all looking at this as a, you know, shorter term downturn, whereby towards the end of the year you will see the signs of recovery. Customers will start scratching their head, and we will push it and say, "Listen, you know, you're still not at 100% utilization, but you're probably going to get there in one or two quarters. So you have to do this now because you can see the upturn coming." I mean, this is the time when we actually push the basically the upgrades. That's an upside. That is definitely an upside.
If our customers work through this inventory glut today, and they see this upturn coming, they see the utilization rates going up again, that's the time when they want those upgrades. You can rest assured that we'll be there to actually remind them of this. Yes. Then the ASP, the limitation because of cost.
Yeah, maybe I'll take that. I think you referred to the to the inflation adjustment that we've been talking about on previous calls, that we're talking to customers about. I think there it's fair to say that we have made really good progress. I think for a number of large customers, we have reached agreement on indeed them, you know, compensating us for inflation. Not with everyone yet, so we're still in discussions with someone. We hope to be able to conclude those discussions actually in this quarter. You know, by the end of Q2, we should be in a position to give you know, what the overall picture is.
I'm very helpful that, you know, that the larger customers that we have are willing to share in the burden of inflation, which I think from a fairness perspective is the right thing to do. Again, we're making good progress there and give you an update by the end of Q2.
Very helpful. Thank you very much.
Thank you. We will now go to the next question. The next question. One moment, please. The next question comes from the line of C.J. Muse from Evercore. Please go ahead. Your line is open.
Yeah. Good afternoon. Good morning. Thank you for taking the question. I guess first question, you talked about seeing customers pushing and others pulling in. Can you comment specifically on what you're seeing just for EUV? As part of that, you know, given, you know, some commentary around reuse, does that cause any worry that we might be putting on overcapacity on the EUV side of things, at least over the near term?
CJ, could you... I will answer the question on the pushing and pulling. What do you mean with the reuse? Could you specify a bit more the second question? I wanna make sure I understand your question correctly. Could you repeat it again, the second part?
Yeah, of course. I, you know, I think that there is commentary out there that, you know, TSMC is looking to reuse 5 nm down to 3 nm, and as part of that could reuse a portion of the EUV tools used for 5 nm. Just curious how you're thinking about, and I know you don't want to talk about specific customers, but how you're thinking about more broadly speaking, the potential for reuse and what impact that might have on EUV demand.
I think that in general has always been the case. I mean, customers will use the tools for the nodes where they need to use them. It all is a matter of how big is the node. You know, I think if the 3 nm node or the 5 nm node is smaller or is bigger, that will drive the demand for, you know, EUV tools. Customers are like us, business people. They will allocate their capital that they have on the balance sheet wherever they see fit. That is more a question of how big are those nodes? We currently believe, when we listen to the customers, that they believe the 3 nm node is a very big node.
Well, what they don't sell on the five, they can match it on the three, then they will use those machines in the three node, but then it's the node size that really drives the need for the EUV tools. This is what is reflected currently in the customer demand that we're currently seeing, you know. This actually is part of the answer to the questions I received on question number one and two this afternoon. We still see the, you know, demand, the overall demand, EUV and DPV to be up next year. That is a reflection of what our customers believe their installed capacity needs to be, and that's based on how big they think their node's going to be. That's driven by what they see from their customers as, you know, the end demand.
I think when it comes back to your first question of pushing and pulling, that's particularly true for DPV, not so much for EUV. I think we've seen in DPV, we have seen, especially in the memory space, we have seen, you can imagine, you know, 3D NAND, they don't use EUV, but the market situation isn't, you know, optimal. You see there pushbacks. Those tools are happily been taken up by the IDMs and by our customers in China, for instance. It's particularly the pushing and pulling is a DPV event.
Very helpful. Just a quick follow-up question on domestic China. I think you said 20% of calendar 2023 revenues. Can you confirm that? If that's right, then, you know, roughly 50% of your non-EUV tool business will be domestic China in 2023. The question there is, how sustainable are the demand trends there beyond 2023?
No, I think the math is correct, and I think it was, you know, one of our other analysts asked the same question. You know, yes, I think the 45% is about right, or 45%-50% is about right. I think it's very sustainable. You know, in my latest trip to China, I spoke many customers and also some end customers. The expansion plans, especially when it comes to issues like the EV transition, when it comes to the rollout of the communication networks, when you talk about the energy transition, that's all in that mid critical to mature domain. The number of end products that they are planning to produce is significant.
The semiconductor capacity base to support that is not there yet. It's being built. This is why I think it's sustainable. I think we're underestimating. I sound like a broken record, I suppose. I think we're all underestimating the end demand for mature and mid critical semiconductors. The application space for those semiconductors is so wide. Every time, you know, you could say, "Well, I'm now biased because I've been there now very recently, and I talked to those customers and those end customers," but I'm convinced that is needed. So I think it's very sustainable.
When I look at the expansion plans, in the major centers in China, whether it's Beijing or Shanghai or, you know, Shenzhen, those fabs will be there, the end markets are there, and there's going to be a lot China for China. I think it's sustainable. It's my view based on my latest visit.
Thank you.
Thank you. We'll now go to your next question. Your next question comes to the line of Mehdi Hosseini from SIG. Please go ahead. Your line is open.
Yes. Thanks for taking my question. The first one for you, Peter. How should I think about the EUV mix shipment in 2023? I'm more interested in the mix of 3800 E versus 3600D .
Yeah. Okay. Well, you can think about this very clearly that it's going to be 3600 . That's what... Very few 3800 , you know, because the 3800 shipments are really pushed towards the end of the, you know, of the year, partly because the 3800 has new technology that is similar to the technology used in High NA. It's basically, it's the system integrations, High NA 3800. They run side by side. That pushes it towards the end, you know, of the year. When it comes to some of the supply issues that we've seen over the last quarters, also particularly pertain to this technology, to 3800 and the High NA technology. That push has pushed it all back towards the end of the year.
I would, in your models, I would focus on the 3600 E.
Okay. Does the initial 3800E shipment start at 200 wph throughput?
Sorry, that 30?
Does the initial 3800E come with 200 wph throughput?
195. Yeah, 195, Mehdi.
Okay. Thank you for that. My second question. Peter, you mentioned in the prepared remark that with China, the risk is seeking license for NXT 2000, which I don't think is available. In the prior earning conference calls, you have talked about the 5% downside risk to backlog due to increased restrictions. How can I reconcile the 5% downside risk to NXT: 2000 that I don't think is available yet?
Well, it's the NXT: 2000. We don't m:ke NXT 2000s anymore. We make 2050s and the 2100s, but that's just a number. It's basically the NXT: 2XXX , yeah. I think the 5% that we said in previous call had to do with the indirect effect of, because it had to do with the October 7 rule, where basically we were able to ship lithography tools to China. Yeah, you have to distinguish between the October 7 U.S. rules and these new trilateral rules, which are the Dutch export control rules. The advanced immersion, which we interpret as NXT :2XXX , are the Dutch rules.
Now, the October 7 rules, we could ship every immersion, you know, DUV immersion tool to China, only if there would have been a restriction on deposition etches, for instance, we could be the indirect victim of this. This was the 5%. Now, currently where we are today, I think almost all of the Chinese customers that I know have actually changed their roadmaps back from anything that potentially falls under October 7 U.S. rules because they don't wanna be blocked. They basically are reverting back to, you know, 20 nm and above, yeah. Which I just mentioned is a very significant, you know, market. The Chinese domestic market for that product is huge. Yeah. They're just reverting back.
That means that they don't order 2050s or 2100 s. They will order 1990s . Yeah. That's what they're doing. I think the 5% actually goes down to... Well, it's not relevant anymore. Yeah. It's now, it's basically governed by the potential Dutch rules, which, you know, mean that it's 19 ADM, you know, up, which, by the way, is not under export control as we see it today. That means that that market is still open and there's significant demand.
Got it. Thanks for clarification and details.
Thank you. We will now go to our next question. Your next question comes from the line of Sara Russo from Bernstein. Please go ahead. Your line is open.
Hi. Thanks for taking my question. In the commentary and the video that you released this morning and from what you had said during Q4, you mentioned that you're prioritizing shipments over system starts based on customer asks, and that sort of helped drive the strong system sales for this quarter. Can you talk a little bit more about the operational dynamics of that and sort of what are the follow-on effects for next quarter and throughout 2023? I have a quick follow-up.
Yeah. The operational consideration, first and foremost, was to make sure that, you know, cabins are empty, right? That you can, you really can, you know, that systems that we're waiting for final parts were being completed and were being sent to customers in Q4. That was it. We really wanted to make sure that both based on customer demand and on, you know, getting cabins clean, getting, you know, all the, all the inventory records clean. That was the reason why we did and then why we really prioritized the shipment over starts. R&D does have an impact then on the outputs and therefore the shipments in Q1. And that's what you see.
I think in all likelihood, what you will continue to see is that in the quarters to come, you will see output go up again. There you will see output go up again, also commensurate with the increase in capacity that we're having. That's what you, that's in all likelihood what you're gonna see in the quarters to come. If nothing changes on the revenue recognition for fast shipment, we talked about that on prior calls, then in all likelihood, what you're gonna see is that the EUR 1.5 billion that were now lower in terms of fast shipments, carrying into from Q1 into Q2 versus, you know, the what we receive from Q4 into Q1.
That EUR 1.5 billion, you might expect that we are going to, you know, to over the next three quarters are going to, you know, to build those, and as a result of that, have more outputs in those quarters for that EUR 1.5 billion in comparison to the revenue that we recognize. That again, by the end of the year, we would be back to the EUR 3 billion.
Okay, great.
As I also mentioned.
Okay.
As I also mentioned before, at the end of Q2, we will give you an update of where we stand in our discussions with customers. Because as we mentioned on previous calls, there is an opportunity that if customers accept the shorter testing cycle that comes with the fast shipment. If customers are fully accepting that shorter testing cycle upon shipment, then actually we could for, you know, for those customers and for those tools, we could start recognizing upon shipment again. That would mean that the fast shipment saga, at least for those customers, will come to an end. That would mean that, in fact, we could start recognizing upon shipment again.
If that's gonna be the case, you know, then the EUR 3 billion would be lower by the end of the year, but it would also mean that in all likelihood, revenue during this year will be up.
That makes sense. Yes. As a follow-up, is there any, does that have any, the sort of all that have any impact on average lead times? Is there anything that we should consider as far as anticipating changes to lead times as the, you know, the orders come down and the sort of some of the orders normalize and the backlog begins to normalize, does that change the lead time?
I think lead time is as it is. I think what you've seen is that the, you know, with an order book that has 2x the system serves in there, you know, the order time actually becomes larger than your normal lead time. I mean, that's what you're, that's where you're gonna see, that's what you saw as a result. You know, Peter talked about the backlog and talked about lumpy order intake. No, I wouldn't expect any big changes on that front.
Great. Thank you very much.
Thank you. We will now go to our next question. The next question comes from the line of Sandeep Deshpande from JP Morgan. Please go ahead. Your line is open.
Yes. Yeah, thanks a lot for letting me on. My question, Peter, is about more about the latter half of this year into 2024. In a scenario where things remain like this as they are today to the end of the year, how do you see things playing out?
Sorry. Sandeep.
Hello. Can you hear me?
Yeah, yeah, I can hear, but I hear some background noise.
Yeah.
What if what we're seeing today goes into second half and goes into 2024?
Into the second half. Yeah. Yeah. Yes, that's correct. Yes.
Yeah. I think if it's just the second half, it's gonna be the second half. We just are in this period for one or two quarters more. Yeah. That said, ultimately, what drives the demand as is the ultimate belief our customers have that for 2024 and 2025, they need that capacity. Yeah. This is all driven, like I said earlier, we're not looking at a massive recessionary environment. We're looking at a downturn. All we could say is a typical downturn situation in the semiconductor industry, which actually hasn't happened for a large number of years. Where we're, you know, the supply just exceeds the demand.
We know the demand drivers, which are driven by, you know, the high inflation rates, the consumer confidence hit as a result of it, the geopolitical uncertainties. There's all sorts of reasons why the end demand is now lower than what people expected. We're in this classical semiconductor down cycle, whereby customers are working this off quite diligently. I mean, they're all, you know, reducing their output, making sure that there is a supply demand balance for semiconductors. That will be the point where you will see that turning and then it goes back up again. Now the big question is, with what speed, at what slope is this recovery? That's your question. Well, I don't know. What I do know is that nobody thinks about this massive recession. Yeah.
We do see that elements like, you know, lower inflation rates will actually help the consumer confidence. We do see that growth rates in China are a bit better than we expected. So there are all kinds of potential positives that will drive the 2024 demand. That's ultimately what we are looking at together with our customers. We just have to work through this couple of quarters where, you know, we are where we are today. That could, you know, last as another one or two quarters longer. That in given, when you look at ASML, look at our backlog, look at our, you know, longer, you know, lead times, that's not a major issue to us. You know.
It's just going to grow next year the way that we look at it today. I think nothing that I see today gives me high concerns that we will not grow. I have the confidence that we will grow.
I mean, one quick follow-up on that would be on EUV. I mean, given the long lead times for EUV, would you not be soon having to get in the orders for EUV by the end that will ship in 2024, by in the next couple of quarters? Because otherwise, you know, you will not be able to be ready for those shipments as such, because you don't have all of that in your backlog today.
Correct. Correct, Sandeep. I mean, like I said, on the back half of the second half, you could say Q4-ish of next year, we still need the orders. Well, we need to get those orders in for over the next one, two quarters. Yeah. I think that is going to be indeed something that we're going to discuss with our customers, and that's an expression of their confidence that they need those machines by that time. Yes, the next couple of quarters, we're going to see some of that. If it doesn't come, then probably those customers have different views in a couple of quarters from now than they have today. We'll just, you know, see at that moment in time what it is.
At this moment in time, that's not the case. Yeah. I'm pretty confident that we will book those orders because yes, you are right. We don't have all the orders yet for 2024 or for early 2025 for, you know, that matter. Huh?
Thank you, Peter.
All right. We have time for one last question. If you were unable to get through on this call and still have questions, please feel free to contact the ASML Investor Relations department with your question. Now, operator, may we have the last caller, please?
Thank you. We will now take the last question for today. One moment, please. Your last question comes from the line of Joe Quattrocchi from Wells Fargo. Please go ahead. Your line is open.
Yeah, thanks for taking the question. I just wanted to go back to the comment that Peter made on China in talking about your Chinese customers moving back to older nodes in response to the export restrictions. Is that to assume that then the Chinese memory customers, I guess, have stopped taking lithography tools?
Sorry, with that top the Chinese memory customers. Well, if you-
Yeah.
Yeah. You know that for 3D NAND, you don't need advanced, you know, immersion. Yes, they will be challenged by the fact that they cannot get advanced DUV DRAM. That will be it. They'll just have to figure that out. I mean, you know, they still want what they can get, so mid critical immersion, which I don't think is going to present them a problem looking where their roadmap is today. It's not going to give them a problem today. If you have a roadmap that you wanna go further in three or four years from now, yes, you do have a problem.
You should not forget that the Chinese memory customers, especially DRAM, are absolutely not at this, at the, let's say, roadmap execution phase as the leading DRAM makers. They are still behind. What they can buy under the export control rules will help them today. Yeah, you know, they'll have to find different solutions. You know, you know, I'm not a semiconductor manufacturing or design expert, but, you know, they have to either, you know, find a solution or they have to stay where they are today.
Got it. That makes sense. Just a quick follow-up. How do you think we think about the OpEx trajectory for this year? You know, you kind of referenced maybe a little bit more prudent capital spending management, but any change in the OpEx trajectory?
No, I don't think so. I think the, you see the, you see the, you know, the direction of travel on both R&D and on SG&A. I think there, about 19% of revenue, would be a good take, I think, for the full year. You see what we have on Q1, you see what we guide for Q2, so that gives you a good indication, I think, for what to model for the second half of the year.
Perfect. Thank you.
All right. On behalf of ASML, I'd like to thank you all for joining us today. Operator, if you could formally conclude the call, I'd appreciate it. Thank you.
Thank you. This concludes the ASML 2023 first quarter financial results conference call. Thank you for participating. You may now disconnect.