Ladies and gentlemen, thank you for standing by. Welcome to the SGL Carbon conference call on the first half results of 2023. Throughout today's recorded presentation, all participants will be in a listen-only mode. The presentation will be followed by a question and answer session. If you would like to ask a question, you may press star followed by one on your touchtone telephone. Please press the star key followed by zero for operator assistance. I would now like to turn the conference over to Claudia Keller. Please go ahead.
Yes, thank you. A very warm welcome to our conference call about our first half 2023. On behalf of SGL, our CEO, Torsten Derr, and our CFO, Thomas Dippold, will present our financials, and will give you a little bit more insight about our business development, especially in the Carbon Fibers business unit. After the presentation, we will have enough time to answer your questions. Now I hand over to Dr. Derr.
Claudia, thank you very much. Claudia selected a very nice headline, Solid Group Numbers and On Three Wheels to the Finish. If you look at our numbers, we were able to increase our top line by 1.9% to EUR 560 million, and our EBITDA is stable for the first half year at EUR 88 million. That shows that three of our four business units ran exceptionally well, and we had slight problems with our business unit, Carbon Fibers. Our equity ratio is at a solid 36.1%, our net financial debt at EUR 170 million, and leverage ratio at one.
On the business unit side, we gave some weeks ago a presentation on semiconductors and especially on silicon carbide, and this business is still with a very, very good demand situation in our business unit, Graphite Solutions, and also our small business units, PT and CS, Process Technology and Composite Solutions, are running well above our assumptions. We are not so happy with our business unit, Carbon Fibers. There we see a temporary downturn of the wind industry, and this resulted in impairment, and Thomas will give you some more information about this. Our CapEx is as we explained in our semiconductor call, is higher compared to the last years, and all of the additional CapEx is going into silicon carbide, into graphite expansions for the silicon carbide segment. Outlook.
After 6 months in 2023, we still confirm our sales and our earnings forecasts on group level. Our sales, we forecast on previous year level. The EBITDA will be between EUR 160 million and EUR 180 million. With this, I would like to hand over to my colleague, our CFO, Thomas Dippold.
Yeah. Thank you, Torsten. Warm welcome also from my side. This is Thomas Dippold. It's my pleasure and my honor to guide you through the numbers and figures section of this presentation. As Torsten already said, our H1 2023 overall was really in line with our guidance and our expectation. We clearly said 2023 is going to be a stabilization year and a year of investment, where we ramp up our capacity after two years, where we really scrutinized everything and squeezed our existing production to maximize the output. Now we really invest heavily, especially with the customer down payments into the expansion of our Graphite Solutions business unit.
In H1, in the first six months of the year, we invested over EUR 40 million into capacity expansion, which is far higher than the numbers we usually invest in the first half of the year. You remember that during the time of the restructuring and transformation, we invested maximum on the level of depreciation. We still do that. The excess money that we invest comes from customer down payment. When we look at the sales and the EBITDA on the group level, as Torsten already said, we perfectly can show that we have a stable year. We have in sales, which is less than 2% up compared to last year. In EBITDA, we more or less matched the figures we had last year.
However, as Torsten was saying, we have a very imbalanced contribution to that. Three out of four business units doing exceptionally well. Graphite Solutions, plus EUR 37 billion contribution to the growth. Process Technology, plus EUR 15. Composite Solutions, plus EUR 10, despite the sale and the divestiture of our Gardena. If you add up this, then their growth would have been even exceptionally well or better than what you see here with the EUR 10 billion. Our problem child, what's really hurting us very much, is the downturn in Carbon Fibers.
In the first half of the year, 2023, we have to compare it also, with last year, where we still had the so-called BMW take-or-pay contract, which was very favorable, given the margins and also, the overall, production level that we had and the sales. This year, we no longer have the BMW i3 contract, and we have a, a, a, a really, yeah, very bad market in wind, but we come to that later on. All in all, these three, contributions of the three business units can compensate, the downturn in the carbon fibers. Based on the strong improvement in the profitability in three business units, we can compensate, also the losses that we make in carbon fiber.
Overall, our balance sheet looks quite healthy. With the contribution of Graphite Solutions, the sales split, as you can see on page 5, on the right side, Graphite Solutions stands now for more than 50% of our group sales, and carbon fiber is down to 23. The other ones are growing slightly. When we come to the business units, starting with Graphite Solutions first, where we see a 15.3% growth to EUR 280 million now, coming from EUR 243 last year at the same time. It's mainly the semiconductor business that's driving the growth. The semiconductor sales year-over-year is going up by 51%. We clearly show that we focus on semiconductor in general and maybe silicon carbide in particular. This is where we make money.
This is where we have a good and decent margin, this is also what's driving our top line. When it comes to semiconductor industry, we are fully loaded. We are really on the edge of our capacity. This is what we are trying to expand, we are investing into that, be it in Germany, be it in China, and be it also in the United States. The other industries that we are serving in Graphite Solutions, at least top line wise, are either running on a stable level or even a little bit down. Solar is a business we neglect deliberately because we are rather selling the, the quantities into semiconductor and chemicals due to, due to some economic and cyclical developments, there the sales are down.
Our EBITDA growth, even higher than, than the growth rate of our top line. With 20.6%, we are now reaching EUR 65.1 million, coming from EUR 54 million the year before. This is now a 23.2% margin, EBITDA per sales that we show there, which is a full percentage point higher compared to last year. This is really a very remarkable development, and we're very proud of this development that Graphite Solutions is showing here. Where does it come from? We are fully utilized. We have a very high utilization rate. We sell a lot in, in the very, very profitable semiconductor industry, and there, especially in silicon carbide industry. We shift further some resources and capacities that we have from solar into semiconductor.
Next one is Process Technology. Maybe, in one of the next presentations, we show maybe also a comparison, how they develop, not just compared to last year, but also over the time frame. We see in the top line a 30.9% growth, now reaching EUR 64.4 million in the top line, coming from less than EUR 50 million at the same time last year. Where does it come from? We were very good in acquiring projects and new order intakes in the second half last year, so we benefited that always with a time lack of 6-9 months in the first 6 months of this year.
We see growth in all regions where we are active, be it in Europe, be it in Asia, and also in North America. When you look at the profitability, then we clearly can say, Process Technology is really our role model when it comes to our slogan, of our philosophy, that we say that margin is more important than growth. In this year or in the first six months of the year, they show it in particular, how this can be implemented. There are high utilization rate in their production. They continue with a very strict cost management, and they really just focus on very profitable orders.
The outcome is, as, as you can see here, EUR 11.9 million EBITDA in the first 6 months of the year, with a sales of EUR 64. This is an 18.5% margin without any one-off effects, no positive ones, no negative ones. They really could increase the margin by over 10% if you compare it to the first 6 months last year. Carbon fiber, as we already indicated, Torsten, in his introduction, and we will come to that, how the wind market, which is really affecting the top line. It's not that we have quality problems, it's not that we have any disturbances in our production. No, it's really the top line and the market that's giving us a hard time.
We see a really tough development in our top line, down with almost 30%, coming from EUR 176 million last year, in the first six months of 2022, to now reaching EUR 125.1 billion in H1 2023. Yes, there is a certain price effect in there with the expiry of the BMW i3 supply contract, at 30th of June last year. This is true. We know that, and we anticipated that. However, that now also the quantity is down so much is terrible, this has really given us a hard time. As a consequence, also, our EBITDA pre really went down by almost 80%, coming from EUR 28.2 million at half year last year.
We are now down to EUR 6.1. If you also look at the contribution that we get from our at-equity consolidated joint ventures, like the BSCCB, where we make this carbon-ceramic brake disc, you have to deduct EUR 11.0 million from the EUR 6.1, and then we clearly have to state that carbon fiber, as an operative business, is making losses of EUR 5 million EBITDA in the first six months of the year. How do we react on that? On the one hand side, we have partial production shutdowns that we really idle some of the capacity that we see. Yes, this is fixed cost, on the other hand, we also protect our cash.
Second is, you've seen that last week, we had to impair our assets by EUR 44.7 billion because of the bad business development and also the rising capital costs or WACC that we saw in our H1 report. Both were the triggering events that we had to adjust our valuation on our assets. Composite Solutions, as the last operative business unit that we have, is doing exceptionally well, despite the negative effect from the sale of the Gardena business at the beginning of the year. They can fully, fully overcompensate that and still growing with 14.4% to now reaching almost EUR 80 million, and the top line coming from almost EUR 70 million last year, where, where Gardena was still, still included.
We have a very strong demand from automotive customers in both segments, in large and also small-scale solutions. This business unit, Composite Solutions, was able to increase the margin coming from EUR 9.7 million or 13.9% margin, to now EUR 12.3 million EBITDA, which is a 15.5% margin. This is really a remarkable development that, despite the strong growth that we see, we even can improve our profitability even further, and we are very proud of that development. That really helps, both the smaller business units, Process Technology and Composite Solutions, can really compensate the downturn that we see in Carbon Fibers. Corporate.
Our corporate developments, there we see, when it comes to the top line, there we see a slight decrease in our sales, which is, however, neglectable. I mean, EUR 10 billion at half year. There are still the effects from the asset held for sale business units like Gardena and Pune, which we saw beginning of the year, and then we isolated them from the operative business units and put them into corporate. There you see some effect. The other ones are just some, some charges to other parties and joint ventures that we have there that are in the top line.
When it comes to the bottom line, we see that the EBITDA improves slightly by EUR 0.6 million, or EUR 0.7 million, to be precise, which also shows that we continue with a very strict cost management and keep the costs, yeah, in order, also on a corporate level, that we maintain the fixed cost as good as we can. Last but not least from my side, a look at our major KPI beside the development of the business unit. Yes, for the first time since three years, we, we, we show, at least at half year, a negative net result of minus EUR 10 million, coming from very strong EUR 48.8 million last year.
The main trigger behind that is, with EUR 44.7 billion, the development or the impairment that we see on the assets in the Carbon Fibers business unit. Last year, we also had, in the first 6 months of the year, a one-off effect from the sale of our Griesheim site. This contributed positively in the first 6 months last year to that. We are very confident that throughout the year, at least with our operative and normal development, we will also show a positive net result for the full year 2023 figures, but for the half year, it's EUR -10. Our equity ratio with the impairment suffered, of course, with the net result, which is negative slightly.
We are now have an equity ratio of 36.1%, coming from 38.5 at year-end. Our net financial debt more or less remains flat, despite the heavy investment and despite the negative development in carbon fiber. Our growth here remains at 11.0%, which is also still a very good level. If you deduct, we also published that throughout Q2, that we are now completely refinanced as SGL until 2026 or 2027, with all financial instruments that we put in place. If you include the corporate bond, which we bought back last week, on the 28th of July, we bought back the outstanding remains of the EUR 250 million corporate bond.
If you include the shorter balance sheet to that, then our equity ratio would be above 40%. This is nothing to worry. It's still a very healthy, very, very healthy development. With that, I hand back to Torsten Derr, our CEO, who will explain a little bit more the market of the wind, how we see it, and how we move on with that.
Yes. I would like to explain you a little bit why we were surprised of the bad market in wind energy, why wind energy is so important for our carbon fiber business, I would like to depict the history a little bit. On the left-hand side, you see the reason why SGL is in carbon fiber, because SGL developed together with BMW, a novel concept for a car frame. You can see here on this picture on the left-hand side, two guys carrying a very light and stable car frame, and this is a car frame of the BMW i3, this is the reason why BMW and also Volkswagen invested in our company, because 10 years ago, everyone thought this will be the future of car making.
Unfortunately, the BMW i3 and the second model, the BMW i8, were the only models built, and no other car manufacturer copied this concept. Unfortunately, BMW decided to discontinue our volume model, the BMW i3, by mid of last year. The last BMW i3 was proposed, and our carbon fiber relation to BMW ended for this car model. Thomas and me came into the company three years ago, and as we asked the carbon fiber guys, there was nothing else than carbon fiber for BMW. Thomas and me shifted all R&D resources into the development of new carbon fiber types, which you could use, for example, for wind energy.
I have to say, we were last year so proud, and it was like magic for us, that we could shift all the volume, which volumes which were released from the BMW i3 into the wind energy, because we were able, and our R&D team did a really great job to switch the formulation of this carbon fiber to a fiber which can be used in wind energy. Wind energy was running pretty well, we thought. Now we know there was a lot of inventory built up, but we were able to sell all volumes which were released by the discontinued i3 into the wind energy. I will later on disclose the market studies we used for our assumptions, and they are still writing a pretty positive future.
We shifted the business from car industry into wind energy. Why not into aerospace? Because SGL is producing a special kind of carbon fiber. It's called heavy tow or large tow carbon fiber. For other segments like aerospace or a car industry, you lose use low tow carbon fibers. The manufacturers of carbon fibers are divided as 2/3 to 1/3. We are in the 1/3 segment. We only have 3-4 competitors, which produces heavy tow fiber, but the heavy tow fiber goes into industrial applications. This can either be car industry or wind energy, but not so easily into aerospace industry. We moved from last year to this year into wind energy. What happens, to our surprise, wind energy this year is at a 10-year low.
Also, our direct customers, they had different assumptions and plans, with higher volumes, and we really were surprised. What happens after Siemens Energy came out in May, July, with the reduction of the financial goals with their quality issues, and this started really a staccato of bad news in the wind industry, and everyone who was active in the wind energy came up with a profit warning, with a reduction of forecast, and so on. This was combined with pretty high inventories in the whole industry value chain, which were built up last year, where we thought business is running pretty well.
This resulted that we, in an idling of our assets, I would say, today, as we talk, 30%-35% of our capacity is idled due to lack of demand in wind energy. We sell around 60%-70% of our total volume into the segment wind energy, and this demonstrate how hard the hit of a standstill in the wind industry hit us in this segment. It, it was not so easy for us to escape into other segments, but our R&D department, as we managed to make a fiber for the wind energy, they are working on alternative markets, which I will introduce later on in my presentation.
This is something which is some years down the road, but we will step by step, shift from the lower margin wind industry into higher margin other businesses, and I show this to you later on. On the next slide, you see why we were surprised. Look at the headline. This we call the wind market paradox. You know about the Green Deal, you know about the Biden administration and their goal in wind energy. There are voluntary targets of a lot of companies to go to net zero in the next 15 to 20 years, and a lot of states declared a net zero target, and this is not feasible without wind energy. On this slide, look at this.
There are, from my point of view, the four best market studies, which are there. Here is depicted kilotons carbon fiber used in wind energy by year. You can see all curves, all four market studies, which we have attend, have a strong upwards potential. I start with the two lower lines, which is a very reputable market research institute as IHS. You can see here two lines, the line of 2023, and I think in May, they have released an update of the 2023 study, and the 2023 studies is quite a lot of higher than in last year. IHS was positive.
If you look at the 2 other lines, which is Wood Mackenzie and the consulting company, McKinsey, 2 different companies, they predict until end of the decade, a tripling of the market. The story behind this is very easy. Wind energy is mostly offshore growth. Offshore will offshore wind turbines will grow with a CAGR of 18%, and this is described by all market research institutes here in this panels. Offshore wind energy has to use carbon fiber. Has to use carbon fiber, and every wind turbine sold to offshore wind energy uses carbon fiber, and this is the reason for the steep increase which you see here in carbon fiber demand. Some of them were already talking about the shortage of carbon fiber, especially in the U.S.
We were very happy because we have our biggest carbon fiber production asset in Moses Lake, U.S. Yeah. Nobody has seen the downturn in 2023, and we were really surprised as Siemens started, and now almost all players are out with very bad news. What we think the market will recover sooner or later. Right now, we see no sign of recovery until year-end. What are the alternative markets? Here you see which other fibers we are developing. We will go into the hydrogen pressure vessel market. This is for fuel cell cars, this is for hydrogen generation, and this is more or less a plastic tank, which is wrapped on the outside with carbon fibers, and you need large amounts of carbon fiber.
Our heavy tow carbon fiber fits excellent to this wrapping of hydrogen pressure vessels. There are 15 manufacturers worldwide. We sampled all of them and are in a trial period right now, and 2 of the players are already buying from us. We presented this hydrogen pressure vessel fiber at the JEC Show, which is the biggest carbon fiber show in Paris, and the interest is really high. It takes time until you have a permit to use the fiber and to sell tanks produced with our fibers. It's, for us, a medium volume with a mid-term realization time frame. We are active in construction, and there we have a nice Japanese business. On the second picture are mats depicted.
These are carbon fiber mats. You use them to refurbish, for example, manholes. You put the carbon fiber mat in, put a little bit of concrete on, and you can use the same manhole for another 20-30 years. This is a very cheap method to repair bridges or manholes or whatever for steel concrete constructions. We are active in aerospace. A while ago, we presented to the capital markets our cooperation with Solvay, which is disclosing their half-year figures also today. We have an development joint venture, and we produce something which is like an adhesive tape, which you use for the outer body panels of airplanes.
Of course, there are two major players in this market, which is Airbus and Boeing, and we are pretty far to use our heavy tow fiber for the construction of airplanes. Here, a lot of testing is required, and I cannot promise a fast entering into the business. Expect something by the end of the decade, because probation periods are so long in aerospace industry. They first do sample testing, then they use it in unmanned planes, and later on in the big volume commercial airplanes. I think 2027, 2028 business with Boeing and Airbus might start, but we are on a very, very good way.
Last segment is carbon-fiber rebars for concrete, the big block above is a steel rebar in concrete, which is used in buildings and bridges right now. You know, especially in Germany, about the problems which we have with our bridges. You won't have the problems if we, you would have used plastic rebars with carbon fibers instead of steel, because you will have 0 corrosion, and you can shrink the concrete use by 50% and have the same stability. This will come, but you need standards from the standard-setting bodies in the countries, and we don't expect fast business entry there. Also, something, between 2027 and 2030. You see, we are working on alternative markets, and we still believe in the recovery of the wind energy market.
This shows why we were pretty surprised of the standstill, which we are experienced right now of the wind industry. Okay, I would like to summarize. This is what Thomas and me presented today. Our top-line figures are stable, growth of almost 2%, EBITDA on prior year level, plus 0.1%, and we confirmed our guidance. Our business units, GS, PT, and CS, are running exceptionally well, above our best assumptions which we, which we had last year. We suffered from a 30% top line decline caused by the wind energy, by weakness of the wind energy of 30%. Yeah, how are our markets developing? Semicon is still running very good, and Thomas and me had meetings with very, very large customers in the silicon carbide industry.
They are still going crazy and confirmed the forecast we had. This is a very, very good market, and we try to debottleneck our capacities wherever we can. We have solid call-offs from automotive industry, and as I explained, currently, we suffer from a temporary downturn in the wind energy. This summarizes our half-year figures, and with this, I would like to hand back to Claudia for the Q&A session.
Yes, thank you. Now we have time for your questions. The moderator will give you some more details how to ask questions and to handle the technique.
Ladies and gentlemen, at this time, we will begin the question and answer session. Anyone who wishes to ask a question may press star followed by one on their touch-tone telephone. If you wish to remove yourself from the question queue, you may press star followed by two. If you're using speaker equipment today, please lift the handset before making your selections. Anyone who has a question may press star followed by one at this time. One moment for the first question, please. We have the first question from Thomas Jahn from Berenberg. Please go ahead.
Hello. First of all, I have directly 3 questions. Maybe we can go one by one. My first question is, given the difficult environment, when it comes to the chemical industry, how is the book-to-bill ratio in Process Technology and in Composite Solutions?
Yeah, the book to bill ratio is slightly above one. In Composite Solutions, we are not connected in any way to chemical industry. Composite Solutions is more for roughly 70% focused on the automotive industry, and they are on the ultra-high end, so Ferrari, Lamborghini, and so on, and we see a very, very healthy demand currently.
Okay, perfect. Thanks for this. Another question with respect to Process Technology. We saw an increase in the margin, and you gained a margin of above 20% in Process Technology. How sustainable is this margin? Can you keep this?
Yeah. This margin, we are, we are very happy about what we have achieved, but we don't think that this is sustainable because process technologies, they are connected to the chemical industry. There are some segments which are running well, others which are running not well. We see a little bit of a cool down in chemical industry, and others which are coming in are reduced compared to the prior periods. There are other markets. You also need our synthesis equipment for the production, for example, of ultra-pure hydrochloric acid in the semiconductor industry or in the fertilizer industry. We had very good order entries from this elements. How sustainable this is, how long this strong order entry stays, we cannot say, but for the time being, we are pretty satisfied.
Thomas?
Okay. Now.
Yeah
... you were mentioning the margin, and, and, and Torsten described the market, and, and I think he, he described it perfectly. A margin of 18%, which you see in, in, in the first 6 months of the year, to be honest, we don't think that this is super sustainable and that we can maintain that, level or even increase it. we-
Mm-hmm
... we had some very good orders and very good projects in the first half of the year. We always said a double-digit margin is necessary in this specialty business, and this is how the business unit really developed perfectly into. Going beyond 18%, we don't think that this is sustainable.
Perfect. Thanks. This helps a lot. The last question from my side is with respect to the customer prepayments you have already received. How many customer prepayments have you received so far in 2023, and can we still assume a CapEx of EUR 80 million-EUR 90 million for 2023?
Yes. I mean, 40 times 2 is 80, and normally, we, we are always a little bit backloaded when it comes to, to CapEx. We, we, we are running full steam ahead with our CapEx, and we, we do whatever we can to ramp up capacity. This is not greenfield, this is all brownfield. We invest in our sites, be it in Germany, be it in North America, and also in China, on the Graphite Solutions. There, especially when it comes to a capacity expansion in semiconductor equipment. We are really running full steam ahead there as promised. Your second question was on the customer down payment. Yes, it continues.
It was EUR 10 million in Q1, it's EUR 6 million in Q2, and you can expect further customer down payments, throughout the rest of the year.
Perfect. Thanks. Now we're stepping the queue.
Thank you.
Ladies and gentlemen, as a reminder, if you would like to ask a question, please press Star, followed by 1 on your telephone. The next question is from the line of Sven Sauer from Kepler Cheuvreux. Please go ahead.
Yes, hello. Thank you for taking my questions. The first one is on your capacity and your planned expansion. I was wondering if you could maybe provide some more color on that. You mentioned in the presentation that it's not only in the Graphite Solutions segment, where your capacity is at max, but also in another segment. Then you the previous question, you mentioned that the investments are not greenfield investments. I mean, I was wondering as an add-on to that, what what's the limitation to expand capacity further? Is it, is it money, or is there any other bottleneck to further expand capacity in the Graphite Solutions segment? Thank you.
Yes, Sven, thank you for your questions. I think the first question was on, on how, where and how we invest. We can clearly say, Process Technology, they hardly need any, any CapEx. It's more project business, so this is not, not, not so relevant for. A Composite Solutions, we invest, of course, whenever we win a new project, and we need some new toolings. Partially, our customers finance it, and then we also have a kind of a down payment or a customer down payment also there. We invest whatever those businesses also need also for, for carbon fiber.
We invest, despite the, the difficult situation in, in case we need something, and you know that we switch our energy supply in our Lavradio site from gas to biomass. This, of course, we, we continue with that. We don't stop that because we think it's also a sustainable move into a green carbon fiber. This is something that we still continue to do. Everything in excess, be it from our own cash flow, yeah, what, what we can, can create from our operative cash flow, we spend on the level of depreciation for, for the expansion there.
As long as we have enough room and capacities in existing sites that we can further equip them with machines and furnaces and ovens, it's definitely faster and generating more and more cash and also higher sales. We can serve our customer much quicker than developing a greenfield site, where we need, you know, you need a construction company until everything's set up. This is easily 1 to 1.5 years until this has been installed. We try to serve the customer demand as quickly as possible, and this is by max out and utilizing the space that we still have there. I think we can continue with that for still quite a while.
If you give me unlimited resources in engineering, capacities and, of course, money, we, we certainly have good ideas how to invest, but, we, we think, with the current demand that we see, and also that we maintain our cash flow as, as a, as a, you know, good corporate, company, then, then we think, we, we spend the money that we have, in, in a very, a good way. Of course, it, always can be more, but you also have to make sure that you spend the money diligently, and this is what we can guarantee by, moving ahead as we do.
Great. Thank you for the answer. I have one follow-up question in the Carbon Fibers segment. Would you share the exposure you have to the offshore and onshore wind segment in Carbon Fibers?
Yes, Sven, this is very easy to answer. You can build a wind turbine with both glass fiber, where we are not in, or carbon fiber. The longer a wind blade is, the more carbon fiber you need. Above 90-meter blade lengths, you can only do it with carbon fiber. The onshore installations are smaller than the offshore installations. I shared with you the growth rates. Offshore is growing with 18%. I think onshore is forecasted with 2%, and the share of carbon fiber used in onshore installations is very low because the blade lengths are lower. You could focus everything what we do or 80%-90% on the offshore market.
Perfect. Thank you.
understood? Okay.
Yeah. Thank you.
Ladies and gentlemen, as a final reminder, if there are any further questions, please press Star and one on your telephone. Far, there are no further questions, and I hand back to Claudia Keller for closing comments.
Yeah, thanks for your participation today. You will find the presentation, the replay, as well as the half-year report on our web page. If you have additional questions, please contact Jürgen Köhler or myself. I only can wish, have a relaxing summertime, and goodbye. Hope to see you and speak to you latest, latest in November. Thank you. Bye-bye.
Ladies and gentlemen, the conference is now concluded, and you may disconnect. Thank you very much for joining and have a pleasant day. Goodbye.