tk accelis Group AG & Co. KGaA (ETR:TKCC)
22.26
-1.14 (-4.87%)
Nov 20, 2026, 6:08 PM CET
← View all transcripts
CMD 2026
Jul 20, 2026
Summary
The strategy centers on value-added services, North American growth and efficiency as independence approaches. Midterm guidance is sales CAGR above 4% and adjusted EBITDA margin of 4%–5%, with portfolio actions supporting the upper end.
All right. Good afternoon, everyone, and welcome to tk accelis' first Capital Markets Day. My name is Veronika Endres. I am Head of Investor Relations. With me today is our executive leadership team. We are very excited to welcome all of you here in London and those joining via the live stream from around the world. Today is a very special day for tk accelis. It is another milestone in our journey towards becoming an independent company. It is a great opportunity to present our strategic outlook, our business model, our financial ambitions to the investment community. Great to have you all here today. Before we get started, I just want to cover a few housekeeping items. First, today's presentation contains forward-looking statements. Please take a moment and read the disclaimer, which is shown on the screen, but also available in the presentation material on our website.
For those here in the room, in the unlikely event of an emergency, please follow the instructions from the hotel staff. Emergency exits are located on each side of the room. Finally, please note that today's event is being recorded. A video will be made available on our website shortly after the event. Right. Let us have a look at today's agenda. We will start with an introduction of tk accelis, followed by an overview of our market environment. Then we will look at our three business units: Materials, Processing, and Solutions. After that, we have a look at our strategic outlook, followed by insights into our ESG and people strategy, our financial framework, and finally, our financial ambitions. After the final part of the event, we would be also very delighted to see you at the Hyphen-Sigma for some drinks and refreshments.
I think I missed now that we also have a coffee break in between. I think halfway through the presentation at around 3:00 P.M., I guess, we will have 20-minute coffee break. We also have the opportunity for Q&A at the end of the presentation. Before we start the presentation, I would like to show you a short film which really brings to life how tk accelis creates value for its customers every day.
Every great product begins long before it reaches the world. It begins with a need, a plan, something that must be there on time, on spec, no excuses. Today's supply chains, they are fast, fragile, unpredictable. That is where we come in. We make sure that materials keep flowing, that production keeps running, that industries keep moving. From the very first source to your success. Because we know what drives you. We set in motion what takes you forward, turning complexity into clarity and uncertainty into security. Creating seamless reliability in every flow. With us, your needs are deeply understood. The right materials exactly when, where, and how you need them. The right solutions and services made to solve your challenges. What begins with tailored materials, processing, and manufacturing extends to higher transparency and resilience in your supply chain.
With us, you can rely on the power of a global network and a deep understanding of what matters the most: you. We orchestrate your logistics, suppliers, data, the entire ecosystem. So everything connects, aligns, and performs. When precision is the difference between good and game-changing, we deliver. Customer-focused, committed, and fast. 380 sites, 15,500 people. Over 150,000 products. One promise. With us, materials as a service goes beyond mere material supply. It means accelerating success. Yours. We are tk accelis, moving industries from source to success.
Yeah. Hello, everybody, and also from my side, a very warm welcome here in London at our first Capital Markets Day. Thank you for assisting also to those who are following us via the live stream. You just saw the movie. I still get a little bit emotional about it when I see it. We launched it following our brand change in the month of June. tk accelis is a unique company. It is a company that offers solutions for more resilient supply chains in a global world. We have the size
the knowledge and the experience to solve a problem that could be the number 1 problem of all of the industrial companies you have in your portfolio. It is how to arrange your supply chain in a world that is continuously changing, where complexity is rising. How to secure a supply chain in time of wars, in time of pandemic, climate change, et cetera. That is what you saw in the movie. That is what we do. I am Ilse Henne. I am the CEO of this company. The easiest way to tell you who I am is I am not a German, I am not an engineer, God knows, I am a woman, and I manage transformation and change across thyssenkrupp for over 25 years. I am also a non-executive director at the French chemicals company Arkema, and at a Danish building company, ROCKWOOL. That shows that I love materials, I love supply chains.
I know about materials and I know about supply chains, but there is something else that I know that I absolutely want to share with my team here with you today, and that is after having had the privilege to work for such a long time for thyssenkrupp Materials Services, now tk accelis, I know this asset is ready to become an independently listed company and to really show its potential that it has, both its growth potential and its potential for margin expansion. We will be doing that today together with the team, and more importantly, together with my CFO, with Daniel. Daniel, over to you.
Yeah. Warm welcome also from my side. Daniel Wodera. I am the CFO of this business. I am on board of tk accelis since October 2019. Before this, in my previous job, I worked 4 and a half years in Italy at Acciai Speciali Terni. That is the biggest stainless steel production company in Italy. So I know all our business also from a mill, from a supplier perspective, which is sometimes very helpful. During that time, I led as the CFO a major successful restructuring, which we also accomplished successfully by selling this non-core asset of thyssenkrupp to a strategic investor. Today, my main role will be the CFO role, but currently I am also acting as the interim CHRO. That is why I will also be later on stage in the ESG and people part. See you later.
Okay. Thank you, Daniel. Daniel is part of a six-person team that is present here today. When I became the CEO of tk accelis in June 2024, I got to handpick my team, which was a big privilege, and I would like to introduce them to you briefly. First, there is Carl Brockmeyer. Carl is the CEO of our biggest business unit, Materials. Carl has made his career at Atlas Copco, and therefore, he really understands what customers in our industrial environment needs. He joined us less than a year ago, and we are very happy that he brings in his customer perspectives in the journey that we have ahead of us. Also new to our team, also handpicked, is Hedda Wedekind. Hedda comes from the other perspective, from the other side of the spectrum.
She has made her career at Tata Steel, so she knows the mill perspective really well, and this business is about from the supplier to the customer and anything what happens in between. Then there is Patrick. Patrick is the CEO of our Business Unit Solutions. He, such as Daniel and myself, also has a long tenure with the group. We have known each other for a long time. His tenure, though, is not a synonym for slow advancement. He has done a lot of things, but he has been very fundamental in the transformation of our business model, as you will see from his role in Solutions. He was the global CEO of our aerospace business, and you will understand how that was fundamental in the transformation that we are driving, and that has brought us to where we are today.
Then there is our CTO, Chief Transformation Officer, Kerstin Hoppe, who is also part of our executive leadership team. She rejoined tk accelis after having left, and she joined at the moment where we decided to prepare really the company for being independently listed. So she has been instrumental in preparing the company to its nearing independence as we will lay it out today. If I want to tell you about tk accelis, then I like to start off with telling you what we are not. We are not the sales arm of the thyssenkrupp mill that many of you might also know. We do sell some of their product, but it is really not as if we were the whole commercial apparatus behind steel. So we are not the sales arm of thyssenkrupp Steel. We are, however, everything else. Yeah.
Everywhere and everywhere in your life, it is very likely that you touch a product of ours. We are in the plane that you took to come here. We are in the car that you took to come here, to drive here. We are in the Nespresso coffee machine that you use. What we do is we buy, we stock, we distribute, we manufacture, and we manage the flow of over 150,000 products. To do so, we combine this materials expertise that we have built up over decades, over more than a century, actually, with our deep knowledge of supply chains. Our own supply chain, which is a global complex supply chain, and then the supply chain of our customers, and that is what makes us really unique.
Now let me tell you a little bit about why we are here and why we think there is a momentum going on around what we are doing. First of all, there is a momentum around supply chains. I think you have seen that from the movie, and if you reflect on how fast the world is becoming more complex, you will understand that our customers, and we have 250,000 in total, are all worried about how to orchestrate the flow of goods globally because of all the changes that the supply chain is undergoing. So the first element of momentum in this business is this demand for better solutions for supply chains. Secondly, there is a positive investor sentiment around materials.
In the more strict sense of our competitive landscape, we have seen important mergers such as the ones between Ryerson and Olympic Steel and the very recent one between Klöckner and Worthington Steel that have actually put a clear value on our businesses and how they are being rated. But also in the broader sense, we see positive investor sentiment. For example, if we look at the development of the share price of steel mills or other companies engaged in raw materials. That is the second momentum. Then there is, of course, the third momentum, which is around TK Group's strategy and the clear intention of the group to list each of its segments independently, to send them in the independence to be capital market ready. For us, that moment is nearing.
You know that the board has suggested that an extraordinary shareholders meeting would be held in August. That will be the plan. Following that, we are, of course, close to being an independently listed company. That is for us as a team and as a company, of course, very exciting because there are lots of things that are going to be possible that were different or I would say less possible belonging to a large conglomerate as we did before. Before I deep dive into our journey and how we have got here, I would like now to spend with you some time on the asset as such. In June 2024, I already shared that with you, I became the CEO of tk accelis, and for me it was fundamental to say we have to start looking differently at this asset.
Before we would typically look at it in terms of products or regions. When I came, I said, for me, the fundamental change, if we want to bring this company to the market, if we want to show investors, customers, our own people, what is the true potential, the growth potential, the margin expansion potential of this asset, it is very important that we explain that this platform, and it's a huge, large platform, 30 countries, 15,000 people, 250,000 customers, 150,000 products, et cetera. This huge platform actually is set together out of three business units that each have their strengths and that each have their potential to move forward and to bring the whole company forward. We are leading. We are number 1 in Germany, we are number 1 in Europe, and we have a very strong number 3 position in North America.
All these three business units they have in common that they are global. That means in each of these business units, we act both in North America and in Europe, our two core markets. What makes them different, and that you can see from the bar here, is the share of the material price in the sales. At our Business Unit Materials, this is the largest business unit. It account for 60% of the sales. You see that materials price is very important in the overall sales. Here is where we have our classical distribution business and our trading activities. What we have been doing over the last, I would say decade and a half, is really investing in more manufacturing activity to add value to the classical distribution that we have been doing for over decades. This is the first part. It's the largest part.
The second part or the second business is processing. At processing, we already add value to the coils that we are selling. So there is a value-added element to each part that leaves the warehouse. The material price is still an important share of the overall sales, but compared to the more transactional business, which we have at materials, here, we have contracts that have a duration between 6 and 12 months, and the prices are mostly either back-to-back, so fixed, or they are related to independent indexes such as MEPS or CRU. Then we have the third business unit. It's the business unit called Solutions. Here you will appreciate that the part of the material price is much less relevant than in the other three business models because this is what sets us apart from classical material distributors or processing companies.
Here we deliver supply chain solutions to our customer. Here, it's about managing the flow of goods of our customers without, in many cases, even owning the material. Here, where it is about offering services to the customers for which we then become recurring income. It's another sales model as a transactional or the contractional one that we have here. The colleagues will gladly deep dive into that. When I look at this and when we talk about this with our 15,500 people as an executive leadership team, there's three words we use to sum it up, and I want to share that with you. It's this company is about becoming better at materials. We have a strong and good benchmark position in classic materials distribution.
We are becoming better because we have chosen a clear path forward to invest more in manufacturing to these products that we are selling here. We can also become better at materials in increasing our capital efficiency. You know that here we have net working capital, and we can also, of course, optimize our network. So materials, better. Processing is where we can do more. We can do more in terms of maximizing our capacity utilization in our European network, but we can also do more in really participating in industry consolidation that will take place in North America. I gave you two recent examples that have been executed on. So processing is about more, and solutions is about new. Is it new what we are doing? No, but it's new in the context of our asset or in the context of the competitive landscape in which we operate.
There is no other company that combines this deep materials expertise with this broad variety of supply chain solutions that we offer to secure the supply chains of our customers, remember, that are constantly more under pressure. Now, how did we get there and where do we stand on our journey? For a very long time, we were absolutely labeled as cash generation over growth. This is no secret for all of you that sit here in the room. If you belong to a large conglomerate and most of your capital is liquid inventory, then all of a sudden there's a cash constraint at the group, then you guess who gets to cough up the cash.
It has been a role of ours for many decades, I would say, and it has limited our opportunities to invest in growth and to really expand on the potential that we have in the group. In the last decade, we have restructured our organization. We withdrew from Asia. We had some interesting niche activities in Asia, but in an attempt to really focus on our two core markets, North America and Europe, we have withdrawn from Asia and focus now on these two parts in the Western hemisphere. End 2019, beginning 2020, we launched what we call our MaaS strategy, materials as a service. We know that as a service does not always come under the pleasure of positive investor sentiment in the last couple of months, but we think here with this, it really expresses what we are doing.
It's offering services around our strong materials backbone, and this is where value creation is generated. Where do we stand now? I just shared with you the new business setup that I picked in 2024. If I may just come back to one element. When we choose to set up the new setup, when we choose to set up this way of reporting into three business units, one of the main drivers was really to create transparency. We believe that by giving this transparency, it's already the first lever of value creation that will take place and for you to understand what are the elements of value in our business model. Back to where we stand today. We are decoupling from the group. We are actually almost finished with the decoupling. We are well advanced in IT carve-out.
We have also set up all the new functions that it needs. You were in the pleasure of getting to know Veronika as our Head of Investor Relations. We have set up a tax department. We have set up financing. We are still looking for a new colleague for M&A, but we are very confident that we will find a strong person there as well. What we have also done, I would say, in the last 5, 6 years, the money that we could invest and the amounts that were at our disposal to invest, we invested them. They were self-funded. We sold some smaller activities, got the cash out of it, and used 70% of our growth investment budget for North America. You will see that our position has already increased over the last 5 years, and that we now sell more in North America than before.
Going forward, what will we do? We will continue to focus on adding value in each of the three business units that we have. Always looking at what we are doing today and how we can add value by offering services in each of these three business units. The colleagues from the BUs will give you more detail on that. We will focus through that on margin expansion and also, of course, on profitable growth. Last but not least, and that is something that I will come back to in the strategic outlook, we will optimize the efficiency, sorry, of our portfolio. Now let me share with you five reasons why we as a team are sure that we can deliver on the ambitions that Daniel will share with you in the financial part.
First of all, we are in an absolutely leading position when it comes to being a critical enabler for supply chain solutions to our 250,000 customers. We serve large addressable markets that have clear growth, both in all three of our business units, supported by interesting tendencies such as nearshoring, outsourcing, and more infrastructure investment. I will come back to that later. Our business model, and that is again why we are going forward, always report to you into these three business units, is differentiated, and each part has the potential for a strong financial performance. Our financial profile, and Daniel will deep dive in that, is very resilient. We are in the position to generate cash in every market situation across the three business units.
Most importantly, and that is what we will be talking about most today, we have a very focused plan on how to accelerate growth once we are independently listed and what the levers will be. Now let me deep dive in the first point, leading and the degree of diversity that we have in our business model. You will appreciate here I already shared that with you, the distribution between North America and Europe of our sales. In Europe, roughly 30%, in Germany, another 30%, and we are up to 38% in North America. But we have a clear path and a clear plan to increase that going forward. We have some presence across the world. This is while we follow our customers.
A couple of months ago, we opened a new warehouse in Bangalore in India because we are serving the Airbus supply chain there to the tiers in the supply chain, and therefore we follow our customers where we are needed. You see that from the customer names, our portfolio is diversified with 250,000 customers. That is logic, and that also brings along, of course, that top 10 customers make clearly less than 10% of all our sales, which shows the diversity of our business model. Diversity in customers also means, of course, diversity in products. Here you see on the left side of the page, 36% of the products we sell are carbon steel, 26% are non-ferrous. Non-ferrous are products such as aluminum and copper, which are both in large demand following electrification trends as we know them. The combination of these two is really unique.
Even if you look at classical distributors that are not in the solution business as we are, if you really look at classical distribution, this combination of 36% in carbon steel and then 26% in non-ferrous is unique. Most companies have either a larger share in carbon steel. These are the larger players in the market. They are very carbon steel heavy. Then the non-ferrous one are mostly niche companies that are smaller and only do this. Having this diversity really is a strong point in terms of our risk mitigation along the portfolio. We also have raw materials. Raw materials is really cobalt, lithium, nickel, which we deal with from the mine all the way up to the customer, stainless steel, pipes and tube, et cetera. Diverse group of customers, diverse portfolio of products that allows for us to serve very different industrial markets. We serve aerospace.
I already mentioned that a couple of time, but of course, also machine shops, steel and metal production, very important electrical products and equipments, metal goods and components. We will come back to the growth at a later moment. But it is not only the industry markets and the products that are diversified. What I also want to point out is that our offering in terms of services is diversified and continues to diversify itself. We have the Control Tower, which Patrick will share you about. We are also making our offering in manufacturing thing, laser cutting, water jet cutting, plasma cutting, grinding, surface treatment, all these activities, we are continuously investing in them and diversifying them. Also in the solutions, the digital suite for supply chain solutions is continuously diversifying. If you have that on the offering side, you also, of course, have power at the supplier side.
Therefore, I also want to briefly share with you how our spend looks like. It is EUR 9.3 billion, and you will see again here, top 10 only covers for 19% of. Top 10 of suppliers only covers for 19% of our total spend. But I think the main message here is that actually, even though we are a global company, and that gives us a lot of buying power, in our doing, we are very local for local. I tend to say we practically speak the language of each of our customers. Remember, 400 sites across North America and Europe give us the power to be very close to the customers. Therefore, you will also see that a little bit over 80% of what we buy in North America or in Europe, we also sell again in North America and in Europe.
That is the combination, the strength of being global, but then having this local network, which allows, of course, to drive a huge amount of stability in the supply chain. That makes us, for example, very resilient or has made us resilient in times of changing tariffs, but also, as you will remember, in times of the pandemic. That is who we are. Now let us have a look where we are acting. These are the markets. Kerstin will deep dive into that a bit deeper. Let me just start with the picture at the left. The market is huge, and we have a lot of opportunity to grow there. The market as such, the addressable market is also growing.
In all of the three business units, we see positive development, and this positive development is supported additionally by a number of trends, where the colleagues will come back to as well, that really push this growth. Think elements such as infrastructure invest in Europe, but also, for example, increased tendency of outsourcing. I tend to say that, to some extent, our most interesting competitors are today our customers themselves. It is fascinating to see how customers today, more than ever before, are considering make or buy decisions. Either it is customers that have to scale up, think data center, they all of a sudden now have to ramp up their production. They are making conscientious decisions on, do I want to invest myself, for example, in manufacturing, first step after distribution, or am I looking for a partner who can do that for me?
Companies that are under pressure, that are descaling, they have exactly the same questions. Do I want to make or buy the next time that I need to renew, for example, a laser cutter machine? So this whole tendency of outsourcing is underpinning the growth in this market. Reshoring, relocalization following tariffs is another trend where Kerstin will dive into. But the market is large. There is potential for growth, and the good thing is that in this market, there are a couple of markets that are growing clearly above the average growing rate, and we are very exposed to these markets. Think our non-ferrous products that go into data center, and also aluminum and stainless going into EV production. There is aerospace, both aerospace and defense with clear growth figures, and in general, the demand for supply chains is also increasing.
Now, there is one additional interesting element that I would like to share with you when I talk about our customer and the markets and what it is that is driving growth. You can imagine that if you look at our customers on the one hand and at our products on the other hand, that a customer that builds trains does not necessarily need the same kind of material as those that are producing switchboard for a data center, or even less, and you may not believe it, but it is true, we just won the opportunity to offer material for a very expensive watch maker, which I cannot name, but I just learned that yesterday. So we also deliver small pieces that go in expensive watches. You can understand that all of these products are very different. That is why we have this broad portfolio.
But the interesting thing is that no matter what material you buy from us, industrial companies today all have to tackle the following common problems. How do we organize flow of goods? How do we mitigate risk in our supply chain? How do we digitize our supply chain? How do we make our supply chain more flexible so that we can manage our costs? How do we make sure that we have enough transparency when we have to declare in Europe CO2 emissions? All of that, all our customers have in common. We are truly the only company worldwide who is in an excellent position to give customers solutions to these kind of problems. Why are we so good at that? We are so good at that because we own the flow. We have what we call domain knowledge.
We know what happens with material from the very first moment where we start trading nickel, all the way up to the nickel alloy part that goes into the wing of an airplane. Anything which happens in between. Whether it is where to source, our global sourcing knowledge, whether it is the demand in terms of manufacturing, understanding how products physically really act and react, but also understanding how important processes are to acquire expertise and excellence in materials, all the way up to managing the supply chain. Putting all of that together is what we call owning the flow and having domain knowledge. Let me ask you a question. Why does DHL have such a high level of trust when it comes to distributing packages? Because they were in the mail business. This is how you can look at this organization.
We have been in materials and supply chains for a long time. We have the domain knowledge, we have the trust of our customers when it comes down to organizing materials and their flows. That unique position, you can also see if you look at competitive landscape. We are in the sweet spot of those that are in the materials core, but we are also playing in the logistic core. Think also rerating, please. What you see here in the materials core is that yes, there are players that are in multi metals and that have some manufacturing, but they are not global. Or you have even those that are multi-metal materials manufacturing, more or less global, never as global as we are, but they are not in supply chain management.
If you look at the logistic core, there are players in the logistics, but they rarely, I would say never, come with the same domain knowledge, with the same materials knowledge that we have. Because transporting an expensive piece of titanium or exporting or transporting a huge tube is quite a different thing than putting something in a Euro pallet. This is what positions us in a sweet spot between the materials core and the logistics core. What all of that means for our earnings quality, nobody better to explain, of course, than the CFO. Please, Daniel.
Thank you. Ilse just talked about our positioning in regards to our competition. I will now explain to you the positioning of our three business units, also in regards to our strategy that we want to increase our value-added services. With this, we will increase our recurring revenues and at the same time lowering our earnings volatility by reducing the exposure to the material cycles. You see this on this graph in terms of the share of material. The share of material, it is also an indication whether changes of material prices positively or negatively could impact the profitability of our companies. Then on the other axis, you see whether this is rather a transactional business or a contractual business with recurring revenue. You see here on the top right end of the corner, our Solutions business, very well-positioned with already two-digit margin profiles.
This is a pure service business. We have here service contract from 1 to 10 years. The bigger part of the contracts are around the 10 years. Here, the stickiness to our customer is at the highest level because we are deeply integrated in the supply chains of our customers. In the processing, we have already a higher share of value-added services based on the processing we are doing. On top of that, we also have less volatility also linked to the contract structure. Here, as Ilse already explained, we have frame contracts around 6 and 12 months. It is also meaning that changes of material prices could only have an impact one or two times a year, and most of the time that is reduced because we have a clear link based on indexes between the supplier and the customer side.
Our material business, this is to a large extent, a transactional business. Here, we want to increase our share of value-added services by more manufacturing. We will come to this later. At the same time, as a CFO, I always call this is our liquidity backbone, because especially this business is providing us with a unique cash profile. We are able to generate cash flow in all market situation. Let us assume in the material business, we have a market situation where prices go up. We have bought the material upfront at a lower price level. This means our unit costs are low, and then at the time the customer needs the material, we are able to maximize our EBITDA.
That is also the time when we then need to replenish the material at a higher price level, so part of the cash coming from the EBITDA maximization is reduced because now the net working capital is increasing. This business shows resilient, especially in a market situation, in a downturn market situation when volumes and prices going down. That is the moment where our margin gets under pressure because we have bought in the material business, the price is at a higher price level, but now we release net working capital by the lowering of prices or volumes. That is when our cash conversion is at its highest points, and that is why we are cash counter-cyclical. That is a market phase where we are able to maximize our cash flow. What I just explained in theory, that is also visible in our past historical financials.
We show here our combined financials of the last 3 years. You see that the top line was going down, and that is why it is important to look at this business over the cycle. Because you have seen that the years during the COVID pandemic, when prices were doubling, even tripling, that our sales sharply increased by 24% and 34%. That was exactly what I explained before, that here in this market situation, we were able to maximize our EBITDA. More important for me is that we have shown resilience in the last 3 years during a downturn cycle when volume and prices were reducing again. You see that we were able to stabilize our margin on that level, also due to the fact that we have already increased the share of value-added services business.
When it comes to the unique cash profile, you see that in the years where we were able to maximize our EBITDA, in relation to this high level of EBITDA, the cash conversion was rather low, like you see in 2021, 2022, still positive, because we had to build up net working capital. During the last 3 years, we were able to release net working capital. You see especially very strong cash conversion when it comes to 2022, 2023, and 2024. You see already in the last year that there is a change in the cycle and that this is best visible also what you see in our current trading.
Because in the last fiscal year, if you look the quarter-on-quarter development, we were able to increase our profitability on a quarter-on-quarter basis in the last fiscal year, 2024, 2025, without having any tailwind from the top line development. You see that the sales is rather stable, but we were able to increase the margin profile also because our strategy to adding more value-added services pays off. In addition to this, starting with this fiscal year, we have increased our profitability further. Taking into account that our Q1 is always as our business year starting October from a seasonal point of view, as we only have half of the December lower quarter. But we were able to increase the profitability on the quarter basis of the previous year.
You also see that now also the top line is increasing because we currently see a momentum in terms of price recovery and also volume recovery. Most importantly, we all believe that we see a margin uplift potential in this business and how we are getting there, this Ilse will now summarize.
Thank you very much, Daniel, for getting that out so clearly. I announced it before. I talked about the five levers, and the most important one is this one. We have a very clear plan to accelerate growth and margin expansion, and we will do that through three repeatable levers, and the BU CEOs will give you all the details on that. From where we are today to the midterm targets that Daniel will reveal in the second part of our presentation, there are these three levers which will come back. We will show you how much of that has already been put into place, what are the effects of, for example, the investments that we have done and what we have scheduled going forward to come to the midterm ambition. The first one is value-added growth. That is why our strategy is called materials as a service.
To anything we do, we feel that customers now want us to do more, and that is where value creation starts. Whether it is at materials, at processing, or at solutions, customers are pulling. They love us, and they want us to do more. So that is lever number one. Lever number two, I referred to it as well a couple of times. It is for us the opportunity to expand in North America. Something we could not do under the auspices of the group. That was difficult. We could not participate, for example, in industry consolidation. In North America, we have strong businesses with good financial performance. We can grow organically and inorganically, and that is lever number two. Then there is lever number three. There is potential for us to become a more productive and more efficient company because of the fact that we will not belong to the larger umbrella as one driver.
We also have a very clear plan on where we want to use AI as an element to optimize our processes. There is the element of efficiency, both in the capital efficiency, for example, in our inventory, but also efficiency in our processes. Then there is the element of increased efficiency in our portfolio, which as I said, I will deep dive into it when we talk about the strategic outlook. Now, before I ask Kerstin to share with you how the market looks like, let me summarize this introduction as follows. This is a unique leading company with a strong financial performance. Through the nearing independence, we will be able to be faster, to be more agile in our decision-making. We will be able to allocate the cash that we generate, and we will be able to prioritize our investments.
We will have access to external capital and to fit for purpose financial instruments. We will be able to incentivize our people according to the expansion and the growth that we will realize. By doing so, by our nearing independence and by our current position, that will translate in accelerated growth and margin expansion, a chance to participate in industry consolidation, and of course, also increased efficiency both on the productivity side and in the portfolio side. Now I would like to ask Kerstin to come on stage and share with you some of how our markets look like.
Thank you. Yes. Thank you very much, Ilse. As you have heard, my name is Kerstin Hoppe. I rejoined tk accelis in February 2025 to bring this company to the capital market and to the independence. I can draw from my experience across different industries and companies, which I helped to transform. This journey of my profession brought me today here, and I am happy to take you into what we see as a market outlook for our business. We will be able to take advantage of three major levers in the market as an independent company. The first one is we are operating in a structurally growing market. The second one, there is a geopolitical momentum currently that helps us as well to accelerate. The third is, you have seen it already briefly, we are operating in markets that have an above-average growth.
Let me take you into the details. First of all, there is a huge market globally for materials. You see here we are talking about a global market volume of $6.8 trillion overall. This market is growing since the 2000s on average by 6% year on year. There are demand engines that are accelerating. First of all, geopolitics. Geopolitics are leading to things like reshoring, relocation of supply chains, and complete new domains for production sites. Infrastructure invest programs, a lot in the European Union or in Europe overall, we see a lot in Germany as well, have been set up to recover investments for infrastructure, for construction. There are specific domains that are growing with new and specialized materials, like everything around decarbonization, electrification like EV. But as well things like AI and advanced materials. So talking about data centers in a second.
As well, a lot of our customers have the tendency to outsource certain products and services to partners they trust in, like us. Let us deep dive a bit into geopolitical fragmentation. When this word comes up, a lot of your clients and maybe you yourself think, "Ooh, this is a threat to us, to our industry, or to our companies." We believe that we can turn this into our advantage. Let us take the example of the U.S. tariffs here. What happens? The U.S. tariffs have been introduced to strengthen the local demand in the U.S.A., and this seems to work. Looking into one indicator for this, there is a number that you can find which tracks the invest in production spend per month. The average rate was between 2015 and 2020, roughly around EUR 70 billion, a little bit more.
This number now in 2024 has increased to almost EUR 240 billion per month. These invest programs in the U.S. are huge, and people and companies tend to build their production sites now in the U.S. But what does it mean when you put so much new production capacity into a location? You really need to have your supply chains under control. You need to even find new suppliers. You need to know where your parts are. This is exactly where we come in and where we can help with our materials and sourcing power on the one hand, and our supply chain know-how on the other hand. Even more, there is another issue. When you invest heavily into your production, you might not be willing or able to have all the production steps that are necessary in your own location.
And we tend to say those who can scale assets best will own them. Sometimes it is not the production company itself, sometimes it is us. Because we can bundle demand from different customers into one of our locations and make it really the most efficient production site. This is exactly what we have done, for example, in our newly opened facility in Santa Teresa. This is where we are bundling demand from different companies and customers out of this landscape of data centers. You see here a lot of other geopolitical, we call it fragmentations or stresses. I could go now into each and everything of this and explain how this affects our business, but the logic is always the same. I will skip now going to all the details. It is always about our global sourcing power and as well our power to bundle production here.
Let us go into some more numbers here. As I already said, our global market is huge. We are talking about an addressable market of EUR 800 billion. This market is growing. It is projected to grow 4% year-on-year till 2030. In its latest study, McKinsey just said that the growth occurs in all parts of this market. Talking about raw materials, about wholesale, finishing, light assembly, about service center, and then the portion of supply chain management, all parts of this market are growing between 2% and 5%. This growth holds true for both North America and Europe, both regions where we are very present and have leading market positions. Besides this, we are operating in markets that grow above market average. We are talking about data centers, EV, aerospace and defense here, and as well supply chain management.
Let me take you into some of the details here. Starting with data centers. A word that is quite common now in all the news and media and for good reason, because data centers are expected to triple their capacity till 2030. Capacity does mean compute power, and we all know how much talk is about compute power we need for our AI. But data centers need to be built, and therefore we need material in this. When we see what material is really important here, we see, for example, the rising demand in copper going up by 22%. Copper is an interesting material because we are already one of the largest copper distributors in North America.
Because we saw quite a while ago the importance of copper for the decarbonization and maybe electrification of the industry, and we could secure the so important supply side of this quite a while ago. But it is not only about copper here. It is as well about other materials like carbon or aluminum, where we as well have a big footprint in the market. We are, for example, supplying materials for cooling systems and tubes already. Really important, we are positioned as a go-to partner for logistics already in the supply chain side and are helping our customers to ramp up their production in infrastructure. Second growth market, as well a market we have a good footprint in. It is EV. The electric vehicle production is expected to grow by 30% year-on-year till 2030.
And as well, we have a footprint already in North America and in Europe in this market as we are supplying different OEMs and Tier 1s, Tier 2s with material. So looking here as well at the copper market, but as well as carbon and aluminum, we are the one delivering, for example, carbon blanks and the high-quality surface quality that is needed or slitting material in aluminum and carbon as well. So in North America, we have a specific portfolio of non-ferrous, as already referred to. But as well in Europe, we have a multi-metal approach here for processing. And in supply side, in supply chain management, we are a day one supplier of one of the largest EV manufacturers globally. So this has led us as well into a position where we are an integral part of the material supply chain for EVs.
Coming to the next growth bucket, commercial aerospace and defense. In commercial aerospace, we see growth rates now in terms of aircraft delivered of 10% year on year. Who would have thought that after the pandemic, we all will be flying like hell again, huh? But it seems to work. But it is not only about commercial here, it is as well about defense. Giving you one example about what we are looking into is the spend or the budget of only the European NATO members. And the spend is expected to more than double here. And of course, both commercial aerospace and defense relates and translates into material demand as well. It is a lot about carbon.
It is as well about copper, and just as one hint, if you look at this number here, it is more than exactly the sum of what we have seen in data centers and EV together, so huge potential here. And aluminum is growing as well. But what is interesting in this market is as well that it is super sensitive. So our customers trust companies in their programs that have a good reputation, a good reputation like we have. And maybe even more importantly, you need not only a good reputation, but as well the right certificates and security clearances to be in those programs. And this is really a step change going there. And we are the trusted partner of our customers with their programs. And interestingly, they trust us as well, sometimes in even completely new domains.
What is not on the chart, but what is really in those programs is, for example, a super nice market called space. So this is still a niche market when it comes to volumes for now, but we are with our partners, with our customers on the launchpad really. And sometimes our parts are not only on the launchpad, but are already on Mars. So super interesting market for us. But as you see here in defense, when the spend goes up like this and build rates need to go up, customers are facing exactly the issues we have described in supply chain are ramping up this. This leads me now to the fourth growth bucket, the third-party logistics and the fourth-party logistics market.
What we see here is on the left-hand side, just a glimpse into one of our studies we are doing as well in our customer service with our own clients, asking them: What is your plan about the future of your services and what do you like us to do for you? A lot of them are telling us what they want, and they are planning to outsource some of their, here in this case, logistics services. This holds true as well for the overall market because we see that in supply chain management, the overall market growth is higher than the industrial CAGR itself. What does it mean? People start to shift their spend from the industry portion to more digitalized version to the supply chain management part. They replace a little bit tons by bits, or bits will replace tons here.
We are already delivering end-to-end supply chain solutions. For example, for a big OEM. We are delivering what we call Control Tower solutions, and we store, we kit, and we do just-in-time delivery for our clients. We are already in the everyday core and supply chain of our customers here. A coordinating role in a supply chain has become critical as the operational equation of material supply has changed. You see here the stages we just saw as well in the study. What was once designed for global cost efficiency is now being redesigned for resilience, for keeping up the supply chains. Our customers are facing things like labor shortage, like supply chain disruption, increasing manufacturing costs, tariffs that come up here and there, and they need to react.
That's why they start to be more flexible in outsourcing a lot of their non-core tasks to partners in the downstream parts. You see it here as well by numbers. These are the parts that are growing above market average. This is where we are already in. This is where we can draw from our access to 250,000 customers globally, combining our materials domain know-how with our already existing supply chain expertise. This is why we think we have really a big future in these markets and how we translate this into specific business units, strategies, and activities our BU CEO colleagues will explain you from now on. Let's start with BU Business Unit Materials and Carl.
Thank you, Kerstin. Hello. My name is Carl Brockmeyer, and I'm the CEO of Business Unit Materials. Our business unit is one of the world's largest materials companies in an industry where scale really matters. We have seen market shares earlier, and also our business unit is the largest player in Germany. We're the largest player in Europe, and we hold a strong number 3 position in North America with ambition to further grow our share. Before joining tk accelis, I spent many years at Atlas Copco, leading global manufacturing businesses in China, also in U.S.A., and in Europe, which gives me a unique perspective also for my mission here at tk accelis. Across my career, I learned that customers, also like ours here at tk accelis, value partners who can do more than simply move materials.
They need partners who they can rely on to improve their productivity, to improve their resilience, and partners who can help them grow. This is exactly the opportunity I see here at tk accelis, and this is also the reason why I joined this great team. We are building on our strong distribution platform to expand our value-added manufacturing services, and this will enable us to deepen our customer relationships. This will help us to create greater differentiation and also to help us expand our overall margin profile. Over the next few slides, I will show you how we plan to do two things. One, optimize the performance of our existing businesses. And two, shift our overall business activities towards higher margin activities. Materials is where everything starts, and this is how we create value for our customers and for us.
Our business model is really based on scale and expertise in sourcing. Being big is a key competitive advantage in our industry. Our broad product portfolio and portfolio of manufacturing activities offer our customers the required agility and reliability for their production processes. And our extensive footprint ensures customer proximity, where delivery times matter, to ensure business continuity for our customers. With our scale, our portfolio, and our footprint, we reduce risk, we improve material availability, and we keep industries moving. And this allows us to create value by making material supply more reliable, more flexible, and also more efficient. Our tagline that you also see printed here is from source to success. And through our three business models, distribution, manufacturing, and trading, it truly comes to life. Our distribution business, which also said, this is the core of our business.
This is where a lot of our legacy stands. We have some companies that are more than 200 years old, so a lot of domain knowledge. This truly is at the core of our platform here. And with our distribution business, we reduce geopolitical risks, we are close to our customers, we offer local for local sourcing. And our stock holding makes us truly a valued partner as it reduces capital requirements for our customers and it reduces lead time pressures. Our distribution business is complemented with our trading and our manufacturing offering through the left and towards the right along the entire customer and the materials value chain. Our trading business connects our customers with the mills, with the refineries, with the foundries for a broad portfolio of raw materials and a really broad portfolio of metals and even some more materials.
And the service that we offer here, and which allows us to make a profit, is a strong materials expertise, our risk management expertise, our domain expertise, and a global reach towards suppliers and customers alike. And this asset-light business model allows us to create a high return on capital throughout any business cycle. Our manufacturing business is the logical extension from materials availability towards production-ready material solutions. In today's environment, customers no longer just ask, "Can I get the right material at the right price?" The real question they ask themselves, "Can I rely on my entire supply chain to function when it really matters?" And this is exactly where we come in. We have always done what we call first-stage manufacturing. This has always been a part of our distribution business.
Now, we have used our extensive scale. We have used this footprint that we already had to expand this with more advanced manufacturing solutions over time. With independence comes the opportunity to do more. For us, this means that every additional manufacturing step that we add creates higher and stronger customer relationships. It makes our business model more resilient, and it improves our overall margins. Our three business models, as I said, they really complement each other really well. It truly sets us apart from our competitors, who seldomly offer all those three components together in that mix. Our independence will offer us the opportunity to strengthen all these three business models. For example, in trading, we can explore new financing models that are much more fit for purpose than what we have access to today.
Now, independence will also allow us the opportunity to allocate capital more efficiently to expand our manufacturing businesses. It will also help us to further speed up the optimization of our distribution business. All our three business models really benefit from two key competitive strengths, our global footprint and our very strong diversity. First, our global footprint gives us high customer proximity. We are big, and we are where our customers need us. We have 240 branches in our core markets where our customers are. On top of that, as customers are increasingly reshoring and nearshoring their manufacturing, we are there to supply them with our more than 49 now manufacturing centers in Europe and in North America. Secondly, we have a really diverse customer base. We serve many customers in many different industries.
As Ilse said, the likelihood is really high that any kind of metal that you touch in your daily lives was either distributed or traded or manufactured by us. This diversity gives us the true resilience as we do not depend on any single industry or any single customer clusters. Actually, our strong presence across many different industries creates new growth opportunities where new pockets and opportunities come up every day. This is true for all the three business models that we operate in. We are now using our footprint, our broad industry expertise to drive this shift from distribution towards higher margin manufacturing activities. Our materials distribution platform really provides the basis for our ability to increase these higher margin activities. This platform is truly a one-stop shop with more than 150,000 different products in our portfolio.
It is a stop for material sourcing, for stock holding, and then also for the subsequent manufacturing. As I said, most of the materials that we distribute requires basic services such as cuts to the length and width of the underlying material. This already makes sure that most of our distribution centers today have some kind of basic manufacturing that we call first-stage manufacturing. Our advanced manufacturing activities, they really integrate seamlessly therefore with our product distribution and that first-stage manufacturing business. It is a logical extension for increased customer service and a higher margin business. Over time, we have also seen a growing demand from our customers to expand these value-added services towards more advanced capabilities. Customers now increasingly request additional manufacturing steps such as hole punching, bending, forming of materials, potentially epoxy coating.
We do flame cutting, water jet cutting of entire shapes, and even CNC manufacturing. Now you may wonder, why do customers want these services from a distributor? As a former customer myself, I know firsthand that customers really want to do and focus on what they do best, which is developing products and taking care of their customer relationships. To do this, we see that they increasingly outsource larger parts of their manufacturing towards specialists. They also outsource larger parts, not just of their manufacturing, but their entire supply chain, parts of which will come later as well. This allows our customers to scale and grow more efficiently. This makes our manufacturing services a true win-win. Our customers get to focus on what they do best, and we get to grow a higher margin business.
Ilse also introduced our three levers towards increasing our profitability. For our business, the main focus is to become better, is to capture this potential to do better. This translates into a clear strategy in how we want to improve margins through these three levers. First, we want to grow in value-added services. We have an experienced and dedicated sales and operations team already in place selling the full portfolio of our service and manufacturing capabilities. On top of that, as we have said, we built already a footprint of 49 manufacturing sites in Europe and in North America, and we see the potential to do even more. We have the demand to do more.
Once we are independent, we will further invest in the expansion of these activities, and we already have lined up the investment into five more manufacturing centers and two additional production lines in existing manufacturing centers as well. Our second lever is to further expand our successful business already in North America. This is in addition to the manufacturing business that we are investing in expansion as well. While we are already an established player in many attractive industries that Kerstin pointed out, such as defense, aerospace, the wider construction industry, we see significant pockets of growth opportunity. There are plenty of also regional white spots in North America where proximity matters. Therefore, we have decided to further invest and close these white spots with the opening of eight additional sites in the coming years.
Our third lever to increase our profitability really centers around the optimization of our own processes and our own operations. Over the past six years, we ran several optimization programs already, and we just completed the last one, which overall resulted in the closure of 25 warehouses. This was really a necessary right-sizing following the many market disruptions we have seen since 2020, which also led to subsequent structural change in the European industrial base. We have also introduced a new unified European operating model, which brings our extensive network closer together to provide a better customer experience. These measures continue to pay off. We see impacts in our profit and loss this year, and we will also continue to see impacts from these savings and from these new activities also going forward still in our financial modeling. We do not stop here.
We continue to drive our efficiency and our profit improvement plans for an entire profit improvement program with more than 280 measures in this and the coming years. This will further allow us to increase our profitability. We will continue to optimize our performance, our own operations along the three dimensions of further improving our network, our product portfolio, and again, our own processes. Let me show you what this means in a bit more detail. We will increase our overall operational efficiency by optimizing our distribution network, by further optimizing our product and our overall portfolio of shareholdings, and our distribution activities and processes internally. By continuously optimizing our distribution network, we focus on the locations where we can be a market leader and where we can further increase the utilization of our warehouses and our manufacturing assets.
We have the clear ambition to be a number one or a strong number two in any markets and geographies that we play in. In Germany, for example, we are currently running a single logistics project that leads to a net profit improvement of EUR 2 million simply by the reorganization of our internal supply chains. This is one of those 280 projects that we are currently running, and that profit improvement is purely from the saving of internal and external shipping costs. We are also taking measures to improve our product portfolio to focus it on higher margin activities. Our product strategy here is to focus on higher value products, and our team in North America has already restructured their product portfolio over the last few years. Their main focus is on those attractive niches that Kerstin pointed out.
The product portfolio in the U.S. and North America is largely focusing on stainless steel, aluminum, and copper, so areas and niches where we can command higher margins and create higher returns. Our team in Europe is currently underway and currently transforming also our product portfolio towards higher margin activities. This will really generate higher margins going forward and drive also higher returns on the capital that we employ. On top of these strategic measures, we also see that automation and AI-enabled processes allow us to make decisions faster and reduce our internal process complexities. We are currently rolling out new data platforms for several of our units and continue our focus on data-driven decision making. In fact, we are actually using technology to drive efficiency also in how we engage with our customers.
We are where our customers are, not just with our physical presence, but really also we are in touch with them wherever they want to do business with us 24/7. Our digital platforms give us higher efficiency and also provide a better customer experience along the entire customer journey from the first contact that we made throughout the entire customer life cycle. With these tools, we can better serve our biggest customers, but also the long tail of more than 200,000 customers that we have in our portfolio. For example, we have already 26 online storefronts with which we serve our customers every day. They strongly complement that physical presence. Thanks to these, in Germany alone, more than 21% of all the orders that we receive are already processed digitally, and 4% of all the orders received in Germany alone are processed via direct customer interfaces.
This is something that we continue to expand day by day. While these numbers are still low, they give us significant opportunity to grow and to further roll out these features to other countries just as well. We also continue to automate our customer-facing processes. More than 58% of all the orders received also in Germany are already processed with AI automation tools. This significantly increases utilization of our back office teams, but also of our customer-facing teams, allowing us to focus our own resources on where they make a difference in managing the customer relationship. They also lead to higher margin, better efficiency of our own setup. I would like to use a few case studies to show how we have expanded our capabilities beyond plain distribution and have successfully expanded this to more value-added and manufacturing services.
To give you some flavor of how we work, I'd like to show you a video of Bravo International. Bravo International is a European company, and they are actually a market leader in metal roofing and cladding. They have a significant operation in Europe where they serve a whole range of DIY stores, and they have recently expanded their business to North America, and they have asked us as an established partner to help them move to the U.S. and establish a local supply chain, local stock holding, and manage the flow of the suppliers for them. Let's play the video and see how they work for us.
Hello, my name is Adrian Minuță, and I'm the Founder and the CEO of Bravo International Group. This year we celebrate 25 years of activity. During this period of time, Bravo has become one of the leading European suppliers of metal roofing solutions. Today, we are the preferred partner of almost all top 10 DIY chains in Europe, supplying our products through 3,500 stores across 24 countries. One of the biggest challenges in our business is supply chain management. Ensuring competitive prices, stable quality, consistent supply, reliable logistics, adapting to constant changes into the trade agreements and regulations, and maintaining a financial sustainability across multiple international markets. Over the years, we have worked with almost all the major suppliers in the industry. We started our collaboration with TK around 10 years ago.
At that time, we were looking for a strong partner able to help us stabilize and consolidate our operations, secure the right sourcing solutions, and support our long-term international expansion. At the beginning, honestly, we didn't have very high expectations. We considered ourselves as being too small to really attract the attention and interest of such a large international group. Very quickly, we discovered much more than just a strong global name. We discovered a true partner focused on understanding the business and being involved through the entire process, from defining the required standards, identifying the right suppliers, to organizing the entire process, including logistic, timing, delivery, and financing solutions. The relationship was never purely transactional. There was always openness, flexibility, and shared interest in creating value for both sides. TK became an enabler for our growth, and indeed supported our international expansion.
In our business philosophy, nothing is ever perfect, and there is always room for improvement. This is something that we shared with TK from the very beginning. I believe this common approach help us to continuously solve challenges, improve our collaboration, and strengthen our partnership over time. Currently, together with TK, we are starting a new strategic chapter through our North American market entrance. Having TK as a strategic partner gives us additional confidence. Their expertise, experience, presence, and continuous support provides a strong foundation for approaching the difficult U.S. market with more courage, ambition, and credibility. At the end of the day, partnerships are built by people, and this is what brings the highest value to our collaboration. The quality, professional approach, focus, involvement, and commitment of the people behind TK.
Their way of working gives us the confidence of being part of a strong family driven by trust, reliability, and shared long-term vision.
Now, before we close, I will just take you through a couple more case studies to show you the overall progression from our distribution business towards higher margin activities. This is really the perfect example of how we are enhancing our distribution business with more value-added services. In this case, we engaged with a German port operator who is currently building a new liquefied natural gas terminal at the North Sea shore. They wanted a broad range of products, and they needed a strong partner who can provide services beyond the simple distribution and supply of products. We were able to offer the products, including gas and water pipes and appropriate fittings, and to source them and to supply them.
Aside from this, we could also provide the customer with additional services like local storage on their production site, quality control as the parts come in from different suppliers, local repairs, if needed, and also the daily shuttle runs to a significant infrastructure site like this, which is a significant complexity that we manage for the customer here. This project is really a great showcase also on how our distribution business, our service teams, and our trading business work together to manage the supply chain from its source towards our customers' success. For the second case, we really want to show you how we are expanding our existing distribution relationships into a sizable manufacturing business. Ilse pointed out earlier the dilemma that customers face between make or buy. This is true in so many things and cases that we see every day.
Customers, the dilemma they usually face is, do they either invest into really underutilized asset, or are they trying to manage a complex set and list of sub-suppliers or contractors who each potentially have different volume requirements, different delivery times, leading to non-synchronized supply chains for the customers? We offer a better alternative. By combining our material supply and our manufacturing assets, our services, we can aggregate the demand from multiple customers onto the same assets. This allows us to achieve higher utilization and a higher efficiency than any customer could achieve alone. The outcome, customers avoid CapEx, they reduce complexity in their supply chain, and they improve responsiveness. This allows them to grow faster and more agile. At the same time, we increase our own asset utilization, and we expand our own margins.
Now, with our third customer case, I would like to take you to one of the data centers that Kerstin talked about earlier. In this market segment, we already have a rapidly growing number of customers that demand our manufacturing services. Data centers are not only growing fast, but as metals make up to 80% of a data center build, they are also a growing source of demand for our materials. All data centers need copper, that Kerstin has said to you earlier. This is really for the electrical backbone, for the wiring, server board traces, bus bars, and more. They also need steel to provide the structural framework, racks and raised flooring, and aluminum is used for cable trays, for cooling ducts, and many more applications, too.
Now, for those who want to go beyond the PowerPoint, actually, I brought some material with me that I am happy to show off to you in the coffee break or after the meeting here today as well. All of these materials also really require not just only a reliable supply chain, but they need procurement, they need the stocking, and then they also need multiple manufacturing steps. When the raw material comes in from the supplier, either in coils or in long bars, it needs to be cut, it needs to be portioned, holes need to be punched or drilled, tags need to be lasered. There is epoxy coating that needs to go on on the reflectors and the isolators. There are as many assembly and manufacturing steps that would come in. Once the products are manufactured, customers actually need assembly-ready solutions.
We take the products once we manufacture them and do not just ship them off, but we prepare them into ready-to-assemble kits for our customers. Think IKEA-like assembly boxes, which they can take and directly mount into their racks onto the production site. This is an additional service, of course, that we invoice and which generates additional margin for us. This saves our customers up to 50% of assembly time compared to their previous supply and manufacturing strategy. Today, we serve a growing number of customers in this field. As the demand for data centers continues to grow, so does the demand for our manufacturing services and supply services, both in Europe and also in North America. I would like to leave you with the key highlights for our Business Unit Materials. One, Materials is a strong business.
We have the right scale and the scope of activities to create more value. With the further pruning of our activities, we said network, distribution centers, also product portfolio, we have the opportunity to create and capture even more value. Second, we will continue the acceleration of our business in North America, especially our expansion of the higher margin manufacturing activities. Three, we will increase our capital efficiency by being more selective with our product portfolio. This will free up capital to invest in higher margin products where we can continue to be a market leader and grow our market share. All of this combined offers us the opportunity to deliver a significant margin expansion and reliable cash conversion throughout any business cycle. Thank you very much. With this, happy to pass over to my dear colleague, Heather.
Thank you. Hello. My name is Heather Wijdekop. When I joined tk accelis after more than two decades in steel, I was not looking for another steel business. I was looking for something fundamentally different. The processing business sits at the critical point between metal production and customer manufacturing. We take metal coils and turn them into highly tailored processed products that customers depend on daily. The more I understood this business, the more convinced I became that processing can deliver something rarely seen in industrial markets. Processing offers structural growth opportunities beyond the underlying metals demand and multiple pathways to grow margins. Today, I would like to show you why processing is uniquely positioned to create value and how we intend to do more of that over the coming years. What does the processing business actually do, and how can we do more of it?
At first glance, we are a network of service centers that cuts, splits, and blanks metal coils. That description dramatically understates our role. Our customers do not just buy processed metal products from us. They buy reliability, flexibility, and simplicity. They need the right processed metal in the right specification in the right quantity, delivered exactly when they need it. We make that possible. Our extensive independent service center network of around 30 branches across Europe and North America has been built specifically to serve our large and diversified customer base. Our customers are dispersed geographically, and they need local service, so each branch in that network exists to support a group of customers in that specific location. Most importantly, we are independent from any individual mill. This means that we can source the best metal for our customers' needs.
That independence, combined with our scale, our processing capabilities, our service offering, has enabled us to become one of the market leaders in Europe and North America. Crucially, it has made us an integral part of our customers' supply chains, and this is the platform from which we want to deliver growth. We are able to do this because we solve a number of challenges that are becoming increasingly difficult for our customers, and we group these challenges into three areas: complexity, certainty, and compliance. Customers today manage fragmented supplier networks, volatile markets, stricter regulations, and growing financial pressure. These are not just inconveniences. They directly impact profitability and erode margins. Every production interruption, every material shortage, every quality issue hurts. Our business exists to eliminate that. When we solve these challenges successfully, we become deeply embedded in customer operations.
That creates strong customer retention, recurring business, and opportunities to grow. In other words, customer pain becomes our growth opportunity. Rather than hearing it from me, I would like you to hear it directly from Manuela and Patrick at our value partner, Schaeffler. Let's play the video.
Hi, my name is Manuela, and I am responsible for purchasing.
I am Patrick, in charge of operations and supply chain management. Here we are at Schaeffler in Bühl.
What we value most about working with tk accelis is the reliability. It is a partnership we can count on, and that matters a lot for us at Schaeffler.
From a logistic perspective, their strong network across Europe is a real advantage. It helps our team stay closely aligned and makes our cooperation much easier in the day-to-day operations.
What I also appreciate is that we can talk about technical topics early on and usually find practical solutions quickly. That creates trust, and it makes the partnership really straightforward.
We have already seen that in a few areas. For example, with rail deliveries, simpler packaging, and more connected supply processes. These are practical improvements, but they are making a real difference.
Looking ahead, topics like low carbon steel, traceability, and process efficiency based on AI will become even more important. It is good to know we have a partner like tk accelis to develop these topics further with us.
We truly value the cooperation and look forward to a successful future.
What you will notice is that Manuela and Patrick rarely talk about metal. They talk about trust. They talk about our strong network and connected supply processes. They talk about our technical expertise, and this is intentional. This is exactly how we want our customers to experience processing. We are not simply a supplier. We are a partner that makes life easier day to day. And we have some real strengths that underpin how we do just that. One of those key strengths of our model is our breadth. We are one of the few providers able to offer comprehensive process products portfolio, multi metals of carbon steel, aluminum, and stainless steel. For customers, that means fewer suppliers, lower complexity, and greater purchasing power. For us, it means deeper relationships and a higher share of customer spending.
Importantly, our process products serve a highly diversified set of markets, from electrical steels used in motors for electric vehicles and transformers, to stainless steel and aluminum used in cooling tanks for data centers. That diversification enhances our resilience and reduces our dependence on any single industry. But where processing is our foundation, services are our accelerator. Over time, we have complemented our processing expertise with value added services that increase customer dependence and strengthen margins. These services help customers to master complexity. For example, using our independent mill sourcing, our import expertise, and our supply chain services. It helps them to improve certainty through our long-term contract and vendor-managed inventory, and it helps them to secure compliance through our accredited testing and quality certification. Every service we add increases our integration into customer operations. And because many of these services require limited capital investment, they can generate attractive returns.
They are fast to market, and they contribute to growth above the expected 4% service center growth that Ilse and Kerstin showed earlier. And this creates a powerful flywheel. The deeper we integrate, the more value we are able to create, the stronger our customer relationships become, and the greater our opportunity to grow revenue and margins. But one of the most exciting parts of our story is that some of the growth opportunities are no longer tied to the process metal volumes and the services that we wrap around them. We have taken our domain knowledge and capabilities and transformed them into two standalone businesses. Our IoT platform, toii, is built on both our production expertise and our expertise in digitizing service center operations.
We turn that into a commercial platform that connects machines, production assets, and enterprise systems, legacy or new, to deliver real-time transparency, process automation, and scalable Industry 4.0 productivity improvements across manufacturing operations. It is growing fast and is already active in 100 sites across and beyond thyssenkrupp and tk accelis. On the right-hand side, you see Palmetal. Palmetal showcases our coil handling expertise. It provides high-value industrial coil logistics and supply chain services, leveraging specialized infrastructure, rail connectivity, and just-in-time operations that are difficult to replicate and mission critical for our customers. Both these businesses are asset light, both are scalable, and both are replicable across customers and geographies. Both demonstrate that processing can add value with its expertise way beyond the processing lines themselves. These businesses expand our addressable market while supporting margin improvement.
If we put all this together, we can see how our products and services combine for success at a leading OEM's largest site. What began as a processing relationship has evolved into a fully integrated supply chain partnership. Today, we manage sourcing, logistics, inventory, quality, and digital transparency across a complex manufacturing network, and that can only be achieved with a trusted partnership. Our customer benefits from lower complexity, increased certainty, and greater visibility. They get to focus on what they do best, lean and flexible manufacturing. We benefit from long-term participation across multiple parts of their value chain, and this is precisely the model we want to deploy. Not simply selling processing capacity, but becoming indispensable to customer operations. Every successful expansion of this model creates additional potential for growth and higher quality earnings. There are more opportunities to grow.
To understand these growth opportunities, it is important to understand where we sit in the supply chain and why the processing business can consistently grow faster than the underlying metals and service center market. Mills are optimized for efficiency. Customers are optimized for flexibility. Those needs are fundamentally different. Mills produce large volumes with standardized output at long lead times. Customers need small batches, customized specifications, and precise delivery schedules. We bridge that gap. Service centers make the supply chain more efficient, more cost-effective, and far more responsive. In Europe, the most extensive service centers are mill-tied with smaller, independent players operating locally. Crucially, we have both independence and scale. In North America, service centers are decoupled from the mills, and the market is much more fragmented. The market structures differ, but our role remains the same. We are mission critical to make supply chains work better.
As supply chains become more complex, more localized, and even more demanding, the value of that role only increases. Despite having the same role, the different regions do demand different growth strategies. We expect Europe to offer an attractive growth opportunity, and we see a midterm sales growth ambition of around EUR 500 million. Here, we already have the network, the infrastructure, and the service platforms that are needed for the market. Our opportunity is to generate more value from what we have today. By increasing throughput, deepening supplier relationships, and expanding higher value services like IoT and Palmetal that we saw earlier, we can grow our sales. We believe that this is an attractive model because it requires limited capital investment. Europe is therefore a strategy of leveraging an already strong platform more effectively.
I will show you two concrete examples of how we plan to do just that. We have two supplier collaborations already in progress, Stegra and thyssenkrupp Steel Europe. Stegra is a new green steel entrant in the producer landscape. They are based in the very north of Sweden, and they are going to need access to a larger market when they start producing. We plan to leverage our logistics, our processing expertise, and our customer network to participate in the emerging green steel market. We signed a multi-year agreement to sell their non-prime steel production via our European network. Quite simply, there was no other partner with our independence and customer reach. In addition, we plan to enter into a joint venture with a leading European supplier, thyssenkrupp Steel Europe. This joint venture combines our complementary strengths in markets like automotive, like industry, to unlock new sales opportunities.
What connects both examples is a simple principle. We are using capabilities that already exist inside processing better than we did before to unlock new value pools. These collaborations require expertise, relationships, and extensive market access, and those are strengths that are difficult to replicate and form an important source of competitive advantage. There is growth potential in Europe, but what about North America? North America represents our largest growth platform. Our recent and planned investments are expected to contribute to our sales growth ambition of around EUR 500 million in the region. We are already a leading player, but attractive growth opportunities remain where customer needs are underserved. Here, our strategy is about adding capability and capacity. Our $100 million investment program combines greenfield expansion, capability upgrade, and acquisition to capture these opportunities, and we have already made two investments. First, in Sinton, Texas.
Here, we have established a new processing operation adjacent to a key supplier's new mill. This has given us a strategic foothold in the fast-growing market of Southwest U.S. and Mexico. This improves customer proximity and access to high growth markets such as electric vehicles. Secondly, Aceroteca, a recent acquisition that I will highlight shortly. Additionally, we have planned for a third investment in Richburg, South Carolina. Here, we will modernize and expand our existing site, increasing our capabilities for higher margin aluminum and stainless steel applications while creating additional capacity for growth. Taken together, these investments illustrate our repeatable growth playbook. Identify attractive markets, build local scale, enhance capabilities, and capture high value customer demand. With a fragmented market that is entering into a consolidation phase, we believe that there remains substantial runway for further organic growth and selective bolt-on acquisitions.
Aceroteca is a great example of how we are already active in expansion through acquisition. Our recent acquisition in Mexico provides an immediate and scalable processing platform in one of North America's most attractive industrial regions, Monterrey. It enables us to serve existing U.S. customers who are also operating in Mexico and capture nearshoring opportunities. Importantly, it gives us a low risk pathway into a high growth market with an experienced management team already in place. This illustrates our disciplined M&A philosophy. We are not just buying scale for scale's sake. We are investing where we can strengthen customer relationships, expand capabilities, and create clear pathways for profitable growth. That is exactly what we believe Aceroteca delivers. Everything that I have talked about today comes together in the three growth levers which you are now familiar with. First, scaling higher value services and digital offerings. Second, expanding our platform in North America.
And third, increasing efficiency and throughput. Importantly, these are not theoretical initiatives. We have already done a lot. I have shown service expansion with IoT and Palmetal, and we have planned to grow both these businesses. With IoT, we are continually developing the offer and expanding the customer base. With Palmetal, we are developing the offer to non-automotive customers. I have shown the investments and the recent Aceroteca acquisition, and we plan to continue to structurally invest in growth in North America and bolt-on acquisitions. I have shown the supplier collaborations in Europe, and in addition, we will continue to optimize our whole network and use tools such as AI to further automate and digitize. Our focus will be on repetition and scale so that we can do more. Finding what works, replicating it. That is how we convert strategic opportunity into above-market growth. Before we take a short break, I would like to close with three messages.
First, processing is a strong business with a compelling value proposition. Through our unique position in the supply chain, we solve mission-critical customer challenges. Second, we are ready for growth. Europe gives significant value creation potential through signed supplier collaborations. North America provides opportunities for expansion and participation in consolidation. Our service businesses unlock additional growth beyond processing. Third, we have a clear pathway to margin improvement and above-market growth. Our ambition is not to simply participate in the market. It is to outperform it. The combination of our market position, customer integration, scalable growth levers, and disciplined execution gives me the confidence in our ability to deliver sustainable value creation and achieve our sales growth ambition of around EUR 1 billion. Thank you for your attention, and now I will hand to Veronika.
Thank you, Heather. As promised, we will have our 20-minute coffee break now. We will be back at 3:20 P.M. UK time for those listening virtually.
I am pretty sure that most of you are frequent flyers. You take the plane quite often? Okay. I am also sure that while you take the plane or you board the plane, you do not spend a lot of time thinking about how this aircraft was actually built and assembled. Now, if you have a look at the various components of an aircraft, you have the wings, you have the fuselage, you have the engines, you have the landing gear. Even the aircraft seats, the legs are made out of metal. Aluminum, titanium, steel, copper in the electronics. Somebody needs to plan for this metal, needs to procure it, needs to ship it, needs to store it, needs to process it, and needs to deliver it to its final point of usage. The question is: who owns this flow? We do.
We are the leading supply chain service provider in the aerospace industry. The next time you take a plane, think about us. You might not see our logo, but we are all around you. If you are an investor and you decide to buy our share, and somebody is asking you, "What is this portfolio company, tk accelis, doing?" You can proudly say, "I own a share of a company which makes people fly." You can see I am excited talking about aerospace. That is because, as I said it, I was leading our global aerospace business for six years before being appointed the CEO of BU Solutions two years ago. I have 29 years in the industry. My name is Patrick Marous.
I have been working five years in consulting and 24 years within the TK Group, most of it at tk accelis, and I have built experience in M&A, corporate finance, marketing, business development. I have headed Carl's procurement department for a certain point of time, your product management department, so I was also in the materials business, before then moving into supply chain. I have been at both sides of the tables, both as a customer asking for value for money and reliability, but also now as a service provider delivering exactly that. What I would like you to understand is the following. Business Unit Solutions is not a materials distribution business model. Our business model is about managing complexity. The more complex the supply chains of our customers get, the more value we create, and the harder it is to replace us.
We are sticky, and this stickiness moves into long-term agreements where we have the potential to cross-sell to higher value products and services earning a higher margin, and even fixed fees. What we call annual recurring revenue in our language means subscription fees. All right? Let me show you what this means at scale. We are a large-scale, globally embedded business, and our operations platform spans from Seattle to Sydney. What is also very important to understand is what we call our operational platform to be smart assets. We are asset smart. Our CapEx and our leases are directly connected predominantly to the length of the contracts we have with our customers. We do not invest speculatively. We are hedged back-to-back when we do our investments. Second important topic is the breadth of our services, ranging from supply chain management to digital solutions.
There is hardly anybody who is able to replicate what we do. Most of our competitors are pure play. I will come to that later. As I said, we are a core pillar of the materials as a service strategy. Scale and breadth of services are the foundations of what we do, but what makes us really special is what we do for our customers because we solve their pain points. What are those pain points? You see a list of them. I will deep dive into three of them. One of the most frequent pain points we address is what is haunting CFOs at night in their dreams, and that is the problem of optimizing net working capital. That is not the case for our CFO, Daniel. You can see he is relaxed, he sleeps well.
But joke aside, that is probably one of the most frequent entry points for us when we talk to our customers. Stockpiling ties up capital and is risky, but if you are having stock outs, you kill revenue, you might endanger your customer relationship. In the aerospace industry, that means you deliver late, you are going to have penalties, very large penalties going into the millions. That is something where we are asked to help find solutions, and I will introduce you to one digital solution which helps us to improve forecasting of inventory demand. Another topic, very actual, and here I refer back to the slide Kerstin showed with the geopolitical situation we have, this VUCA world, the tariffs, all these wars. That is securing supply. A lot of the industries we serve have demand for very special niche products. I will give you one example, the aerospace industry.
Russia was a supplier of almost 60%, if not more, than all the titanium being used in a commercial aviation. That was even, by the way, during Cold War. People did not talk about it. The Russians took the USD, and they delivered the titanium. Russia was a key supplier for titanium in the aerospace industry. With the Ukrainian-Russian war and all those sanctions, our customers had to find alternative solutions. Interestingly, and luckily enough, we were talking to them already, so we had built up safety stock before the sanctions were put together, and we found then alternative solutions to their problems. Our domain knowledge about exactly those sources and where those materials come from and how to find other sources is a key entry point for us when it comes to securing supplies. The third one, very recurring topic, is transportation costs.
If you look at the whole procurement cost, transportation costs make out of about 5%-10%. If you think about trucking, warehousing, moving things. That is also quite often a pain point for us where customers say, "How can I optimize my network? How can I optimize the way I transport the products from A to B?" Or, "Can you actually do it for us?" Here comes the following. The more complex and fragmented the supply chain of our customers are, the more difficult it is to solve those pain points. This is why then they come, and they say, "We have tried it. We would like you as an expert to help us out here." Right? Again, our domain knowledge is a key factor. We have been talking about complexity in supply chains. You have heard this now many times. What does that actually mean?
How does that actually look like? What is a complex supply chain? All right. This is a very simplified chart of a complex supply chain. What you see here is a typical supply chain of an aircraft OEM, let us say a Boeing or an Airbus. I talked about the wing, the fuselage, the gearboxes, the engines. That is the tier 1 level. Here we already talk about 60 suppliers all around the world. Those guys then have subcontractors who produce sub-parts, fragments of these structures, already several hundreds. Those guys then talk to their subcontractors producing parts, mainly mom-and-pop machine shops. You can see you have thousands of participants in a supply chain. This is not a one-to-one relationship, we have a many-to-many relationship. All right? Everybody talks to everybody.
The aircraft OEM sends a demand signal and says, "I want to build 100 planes." That is sort of like the first one throwing a pebble into the water. What happens? You will see ripples going in a circular way, right? It expands like in circles. The next ones receive this message, they send their pebbles, and then you have even more circles, and so on. Now all these ripples come together, and at a certain point, they meet at the highest point and the lowest, and they amplify. So those ripples become a wave, and those waves, when they meet, become a tsunami. These kind of things are a disruption to the supply chain, and it actually looks like this. This is what we call the bullwhip effect in supply chains. We haven't coined the term. That is the MIT.
They've done research in the '90s about this bullwhip effect. Interestingly, they were researching the demand for diapers. You would be surprised, yeah. The demand for diapers should be stable. You have statistics about how many babies are being born, then you average biological functions, and you say so many diapers. But as the diaper industry is very fragmented, they have exactly these kind of things because there are so many different participants, wholesalers, different shops, transportation companies, warehouses. Now, if this happens to diapers, it can happen to turbine blades. If it happens to turbine blades, that is going to be very expensive. An airplane without engines, it's called a glider. Don't glide an A320. Then you have to pay huge penalties because you haven't delivered in time. So again, pain points. Because of this, people start creating excess inventory.
They want to make sure that they're not late. We have service level agreements in the aerospace industry where it says 99.5% accuracy. So people build up excess inventory. Stockpiling, again, dead capital. You have inflated logistics costs because you need to store all these inventories, and so on. This is why latest since Corona, when people were fighting for toilet paper, right, another interesting bullwhip. A lot of the major companies, especially those who are stock listed or in hands of private equity, who have fragmented, complex supply chains, are thinking of moving from the very traditional supply chain ecosystem, where you have a flow of information, as I have described, all those pebbles in a waterfall, kind of. The thing is, if a problem hits here, until the guy here knows it's too late, right? What's the alternative?
People are thinking to move to more this version of a supply chain ecosystem management. That's a digitally enhanced supply chain ecosystem. Now you can see something in the middle of the ecosystem, and that is the Control Tower. We've been talking about the Control Tower earlier. That is sort of the conductor, making sure that all the participants in the supply chain are acting at the same pace, playing the same music, the playing tone, and where information is shared between the various participants in a completely different way. You start doing this, you have way more agility. You have way more speed. You don't react. You can proactively start steering. You see the problems well ahead. You can forward-sense a problem, and then maybe put in your plan B in place. So completely different philosophy on how to steer your supply chains.
The thing is, moving from the left to the right, that is not done in one day. That is really a transformation of your supply chain. We cannot only come at any pain point, we can also come in at any point in time. Because if we have customers who are still in the left and they are thinking to move to the right, this is where we send in our domain experts. We have consultants, digital engineers, solution designers who first analyze the problem and then design a potential solution. Once a solution is found and the customer decides to go for the solution, we start offering our service menu. It can start with logistics. It can start with inventory management. It could be one of our digital solutions. We start building the Control Tower together.
As Rome was not built in one day, Control Towers are not built in one day. Once we are here, we get sticky, and we can start cross-selling and upselling our service menu. We slowly start building a Control Tower, and then we are here. Latest this point, we are talking about multi-year contracts. 7 to 10 years is the average. Then again, it is very hard to replace us because we have become part of the operations of the customer. This is where we start not becoming a service provider. This is where we are becoming a symbiotic partner to our customers. We are part of their operations. Once you have this, then our customers obviously can scale. We have been discussing in aerospace, but now think about what is happening in the defense market, all those contracts coming in.
Those guys are still, from a production perspective and supply chain perspective, in the manufacturing of things. They now need to industrialize. They have sold a lot, but their supply chain is not yet ready. That is exactly what we are doing now, when we talk to our defense customers, getting them ready to ramp up. For this, they need to leave the old traditional thinking of supply chains and move to the new one. The Control Tower, how does it look like? That is the picture you see of any Control Tower at an airport. It has basically a building. That is our physical layer, our warehouses, our racks, our machines, our trucks. This is where we perform our physical activities on the shop floor. Then in a Control Tower at an airport, you would find people, smart people, working with systems and data.
That is our intelligence or brain layer, where we communicate, where we use data, transform it into information to act and decide. Those two components are the Control Tower. Then again, pure play competitors, it is very hard for them to replicate. Give you an example. You talk about a logistics company. They might have the assets, they might have the warehouses and the trucks. What they do not have is the domain knowledge on materials, and their software is probably more there to arrange trucks, but not an end-to-end supply chain solution. You might find a software company who is doing supply chain software. They do not have any domain knowledge of materials, and they will never have the physical assets.
And the classic materials distribution company might have the domain knowledge on materials, but they usually do not have the software, and they are not as global as we are on our physical layer. Now you can see how our things are coming together. This is why our market approach is very important, and this is how we work together with our customers. Once we have identified the pain points and we come with our solution design team to work in a cross-functional way together on the solution, we start picking the items in our menu which are relevant to them. Each of those solution items are scalable, but the combination of the various, let's call them Lego bricks, is individual. There is no Control Tower which resembles another one. It is not a copy-paste Control Tower solution. It is all customized.
Again, this makes us very sticky, hence our long-term agreements. Over the last years, we have been investing a lot in our digital solutions, in our platforms. Why? Because we have seen that reactions need to be taken faster. Data is way more important. I will present to you three of our solutions. They are all proprietary solutions. We have designed them in-house. We have brought tech knowledge and domain knowledge together to build something which is really unique. In certain cases, we have done smaller acquisitions, two of them, to add to our skill set, especially when it is about AI. Now, the products are organized around sense, decide, and act. Forward sensing. Think about the radar in a Control Tower. You want to know what is coming before it is coming. That is exactly the solution.
It is like the digital twin of your supply chain, where we basically make the chain between the different participants, the OEM, the Tier 1, the Tier 2, the Tier 3. If something happens on the Tier 3 side, it cascades up. I know it is very little. We can do a demo at a certain point in time if you are interested, but that is basically the bill of material. If this goes red, everything goes red. So you have an early warning about what is coming, and you can switch to another source or your plan B, or you use your safety stock. If you can sense what is happening, then you can decide better, and this is where pacemaker.ai comes in. This is our AI enhanced demand forecasting tool, where we have assembled various machine learning algorithms with the various strengths and weaknesses to increase forecast accuracy.
Now, some of you will say, "What is new about that?" You have potentially heard about regression models. All good. We have all studied this maybe at university. But this is now really taking the most modern machine learning algorithms with an algorithm which orchestrates other algorithms. The improvements we can do here are double digit in the percentage of accuracy. If you imagine that, like in the aerospace industry, you are lucky to have 60% demand accuracy forecast. You can move it up to 80. We are talking about inventory management. We are talking about millions saved. Millions saved. Now you have decided, now you want to act, and this is where our replenishment tool comes in.
It uses the input from our forecasting so that the replenishers in the company of our customers can make wiser decisions and say, "What kind of SKUs do I need to prepone? What can I delay?" This is where we then start optimizing the inventory. All those three belong together to a suite. You can have them individually, but it makes sense to have them also together. What have we done in the last years, and what trajectory will we follow? When Daniel will show you the numbers of BU Solutions on the revenue side, you are going to see that we have been a little bit flat. The reason for that is we have done some right-sizing active portfolio management.
We have clearly decided to exit certain businesses which were not fulfilling our margin targets. We pulled out of certain countries and, quite frankly, also certain customers. We also did contract management. We renegotiated quite a lot of our contracts. What we have done is we have taken risk out, increased prices, and we have introduced new revenue streams. One of those revenue streams are those annual recurring revenue streams, those fixed fees. We basically get a subscription fee payable either by month or per year for our Control Tower services. Even if at the customer, no production is happening, or let us say the airport, no flights are coming, people are still sitting in a Control Tower. They need to get paid. That is exactly what we have introduced. That is, what Ilse mentioned, is totally new to a business model of a traditional materials distribution company.
We will continue with that. Obviously, continuous improvement is always on our mind. We always want to be efficient. As we have now our in-house AI and digital capabilities, we want to see how AI can help us in making our Control Towers even more productive and efficient. Those of you who are dealing with agents or have heard about agents, obviously, there is this agentic process operations going on. We talk about agent orchestrators. A Control Tower is an orchestrator. How can we automate more in our Control Tower? That should grant us even more efficiencies going forward. Still, early days, we read a lot. Some stuff is coming. We need to find out what is really applicable to us, yes or no. On the value-added services side, we have launched our proprietary tools or solutions, which I just mentioned. Now it is about monetizing them.
Some of them are at the stage where we do market entry. Some of them have already dozens of customers. Now we start seeing the hockey stick coming up. What are we going to do? We will accelerate exactly this rollout of our tailored Control Tower solutions. What is important for us, we want to roll it out across new verticals. There are many industries with a very complex multi-tier supply chain. Again, this mega trend of them thinking about moving from the left traditional side to the right side, now is the moment to do it. We want to be there. We have the references. We have the proof points. This is why we also want to strengthen our go-to-market strategy and especially our global key account management. We have a very different sales organization than, for example, in the distribution business, in the materials business.
We talk to the C-level suite of big blue-chip customers and below. That is more of consultative selling. This is why key account management plays an important role. If we continue on this trajectory, then you will see success in two very, for us, transformational KPIs. Now I am coming back to a little bit finance, the capital asset pricing model, where you have risk and you have return. So what I have shown you now is what we have done over the last years. We basically moved from here to here, so we de-risked, and at the same time, we moved upstairs to increase our margins and our EBITDA, right? We are moving on this trajectory here. We will do so continuously, and this is our ambition here.
We can prove to you that we already have increased our share of long-term agreements to now being 59% and growing. Again, long-term agreements, that means I have a contract of 5, 7, 10 years with a customer, and in this contract, in most of the cases, is exclusive. So I know that we will work together over the next years. Then we have the ARR, which historically, and think about historically being sort of before COVID. Historically, we had zero of those subscription fees. Nowadays, we have EUR 110 million of subscription fees, and this number is growing. So that is exactly how we want to measure on how we improve our risk and return profile.
This is why we are at the heart of materials as a service, and that makes us so special, and that makes tk accelis so different from a traditional materials distribution company. That is the new thing. All right. So far, nice slides, a lot of theory. Show you this in practice. Case study number 1, this is Rolls-Royce engines. They produce those big engines, both for civil aircraft and for military. Rolls-Royce engines in Indianapolis, mostly defense, 80% defense, a little bit of civil aviation. We support Delta TechOps airline there. They had a problem. They came to us. Our entry point was logistics. They had 5 different service providers around their assembly facility, some doing C parts, some doing other parts. They wanted to consolidate that. We sent in our solution design team, our consultants.
We designed one box, so coming from 5 warehouses, going to one big facility, 330,000 sq m. More than 200 people. Obviously, they fluctuate depending on demand, and 100% of the parts are being managed through us. So it was logistics. This is a 3PL activity, which we do, including the shuttles, including the kitting, which goes into the assembly line. The number 1 control tower in the world for aerospace, that is Boeing and us. We have built it more than 25 years ago. It started, and you can see here the menu now, it started with a couple of green dots. 25 years later, we have become an integral part of their organization, basically. So we manage 35 mills. So those are the producers of aluminum titanium castings. We manage more than sub 100 tiers.
Think about the orchestration chart, 700 people being managed, and we have 700 people to support 7 days a week. We make Boeing fly. The third study is, and is actually originated through Boeing, Mitsubishi Heavy Industries. If you think about, again, this orchestration chart, the Tier 1, Mitsubishi Heavy Industries is one of the largest Tier 1s in the Boeing supply chain. They know us in several years, and they've seen what we have been doing for Boeing, and they said, "Guys, I have exactly the same problem. I don't know what my sub-tiers are doing. Can you help me to build end-to-end visibility and help me make more sense out of my data?" We've built them a mini Control Tower, fully digital, just a couple of people servicing it.
I would like you to introduce you to Ito-san, who works at Mitsubishi Heavy Industries, and he will tell you what we do for him, why he has decided for us, and where he sees the journey going forward with us. Ito-san, please.
Hello, I'm Yoshiki Ito, Senior Manager of Manufacturing System Architecture from Mitsubishi Heavy Industries. Our products are used worldwide across industries such as energy, plants and infrastructure, industrial solutions, as well as aerospace and defense. I have been involved in the commercial aviation business for about 30 years, especially in production, supply chain, and manufacturing system architecture. Over the past 3 years, we have worked closely with TK to streamline our material-related operations and information flow. One thing that has been especially impressive is your ability to provide prompt and clear feedback to our requests and questions. This responsiveness enables us to take action earlier. Through our collaboration, we have clearly recognized your key strengths, in particular, your strong knowledge and expertise in aerospace materials, as well as your close relationship with the OEMs and across the supply chain.
Looking ahead, we believe the next step is to move from responding to issues to preventing issues before they happen. We understand that TK is advancing the use of data analytics and AI, and we see strong potential in detecting early signs of delays and abnormalities. This will allow us to take action earlier, leading to more stable operations, and ultimately, delivering greater value to our customers. By combining your capabilities with our manufacturing experience, we look forward to continuing this collaboration and building a more resilient and reliable supply chain together. Thank you.
Arigatou gozaimasu, Ito-san. Known him for a long time. Really nice customer. Let me summarize now. We are not a materials distribution company. We are a complexity business, complexity management business. The more complex the supply chains, the more value we add, the more sticky we get, the long-term our agreements, the more potential to cross-sell to higher margins, the more we can get subscription fees or annual recurring revenues. Moving our profile from here to here, that is our trajectory. I will finish with a small pitch. I love my business. I want to sell it. In case there are any investors here, look at your portfolio. You might find companies in your portfolio which have similarly complex supply chains. Do not be shy to introduce us to them. We might create value. You can have a part of this value.
If you invest into us at the same time, you will create value twice. That is a win-win. All right, I talked about portfolio and creating value, and with this, I hand over to Ilse, who is going to talk exactly about our tk accelis portfolio and how we create value there. Thank you so much.
Yeah. Thank you very much, Patrick. I think by now you all understand what it is that we are doing new at tk accelis, what we are going to do better, what we are going to do more, and what we are going to do new. Thank you very much to the team, to the BU CEOs for laying out the plans and the actions that play in exactly to the strategic framework that I got to introduce to you at the beginning of our afternoon together here. This is what will continue to guide our actions and our plans. I think the BU CEOs have clearly laid out that there are steps that we have already taken that will come to deployment.
There are concrete actions that we are about to take coming from our independence, and that we have a clear way forward on how we can act on these three levers. The first one being adding more value-added activities to each of the business units. You have heard from Carl how from selling copper, we now come to adding a lot of manufacturing and supply chain services to getting the copper to the producers of switchboards for data center. You have just also heard from Patrick that what we do at Solutions, offering logistics services, is now being enriched by an already existing suite of digital services. If we talk about expansion in North America, that is where Heather laid out very clearly where the growth, the sales growth that will be above market growth will come from.
From steps that we have already taken to date, the investment in Sinton, the collaboration, the buying of Aceroteca, the joint venture with Aceroteca, up to the just recently approved Richburg investment, close to important OEMs in the automotive sector, which will then come to deployment and support the ambition and the ambition level that Daniel will lay out. Then there is, of course, also the expansion around the copper production that we have also already invested in. Carsten referred to what we have invested in Santa Teresa in the business of Carl in materials. Then there is the third lever. There is the lever around increasing our efficiency. There are two components in there. There is first, how can we become more productive? We have several levers for that. First of all, we have a huge cost-cutting program called Maximize Your Score. Yeah. It is decentrally managed, but it is kept central.
We have very clear objective that each of the group companies have to comply with. Together with that, we have a clear plan to use AI to optimize our processes, which is similar to what we are doing for our customers, but here for our own supply chain and our own processes. But then there is the second element of efficiency, and that is the one we have maybe talked about the least today. It is what is the efficiency potential in the portfolio? I have talked little about group strategy, TK Group strategy until now, but you will allow me this 2 minutes here.
If we look at what our group CEO, Miguel, has done in terms of shedding light on the potential of each of the parts in the group and the rigor with which he is now driving the action so that each part of the group, each group company, each part of the segments in the TK Group, are being made fit for capital market. That is the same rigor that we will apply to our portfolio. So now let us have a look at our portfolio and let us deep dive a little bit into that. This is a very classical approach to portfolio. We have laid out for each of our group companies, not for the business units, but the level below, a clear margin target. There are three options. Either you are below target, you are on target, or you are above target.
The business unit CEOs have a clear mandate, of course, to bring all companies at least on or above target. For those that are on and above target, it will be about more, about scaling this activity, or repeating it or growing it by putting invest into these entities, both organically and inorganically. The question is: What do we do with the assets that are below target margin? Again, there all BU CEOs have a very clear mandate of taking the necessary steps to uplift the margin and to follow up on the journey they have to improve the margin. How can they do that? By restructuring, by network optimization, as Carl shared, by finding the right strategic partners, such as Stegra and thyssenkrupp Steel Europe, as Heather laid out.
But most importantly, the message I want to give here, if we have assets in our portfolio that do not seem to be able to come up to the target margin, then we will look into divestment. Here is where the second interesting element of this portfolio comes into place. If we divest, if we restructure or divest, it is very likely that we will set free cash through that transaction. That ability to have a portfolio that holds the possibility to set free cash is ideal, and that's the orange arrow, to fund the further activities that we want to put into place to strengthen the efficiency of the portfolio as such.
These activities can be organic, they can be about investments directly into our business, but they can, and they will also be in terms of M&A, acquiring, participating in industry consolidation, for example, as I already laid out. I can tell you that we have a very concrete M&A actionable pipeline. Daniel and I both share an experience of the last couple of years together with the team and those who were already there, where we had interesting targets, but because of the situation at the group, it was not possible for us to act upon it. Now, how does our M&A pipeline look like, and what do we want to achieve with the different possible targets we see going forward? At Materials, we stressed it a couple of times, M&A will be about vertical integration into more manufacturing activities. What will that bring? Clearly, EBITDA margin uplift.
So an important lever to uplift these companies that maybe are not at the margin level in Materials. In the case of Processing, we will talk about bolt-ons, both in capacity and capabilities. Mostly in capacity, we know where the white spots are and where we can put into practice our experience and our knowledge in this important industrial activity, processing of coils in different products. But we can also add, of course, capabilities in term of adding even more value, surface treatments, other products, et cetera. What will that lead to? Very clearly to top line acceleration. Remember, Processing is about doing more. We will grow above market growth as planned here. Then there is the Business Solution.
There's a Business Unit Solutions where we will also look at bolt-ons or add-ons that will be in the area of, I would say, semi-mature or mature supply chain companies because they bring expertise and they bring add-on solutions to what we already doing, to what Patrick has just explained. We are also looking at smaller companies in the digital area to complete our suite. Some of what we have in the suite, we have already bought a small company one and a half year ago called WAVES to enrich, for example, our pacemaker tool. So that will be the way forward in terms of M&A for the Business Solution. What will it bring? It will, of course, improve earning quality. That's what we will be looking at here.
Will it pay into the ambition that we have here that Daniel will share with you in a couple of minutes? But most importantly, of course, here, and I briefly started my presentation with that when I did the outlook of the three business units. This is where we see clear potential for another multiplier on our EBITDA as we are being perceived today. This is our source for re-rating in terms of the value of our company. As a brief sharing of information, when we talk about M&A and when we are being so enthusiastic about M&A, we like to underpin that with a little bit of figures. Here you see how very few consolidated, for example, the market of service center is in North America.
Even with the actions between Olympic Steel and Ryerson and Klöckner and Worthington, the market is still very fragmented and there is still a lot of opportunities to participate here. Even more chances to participate is exactly at materials in this manufacturing part, which will come from downstream integration. Actually, we have also there an actionable list. We have done some of that. We recently acquired a Canadian company called Cobotix, which is a manufacturing activity we have in North America. We have other targets of this size at our discretion that we can then use to go this way here at materials.
The main reason that I wanted to put the focus on M&A, apart from showing the diversity in the different M&A activities, what we can do is to briefly share with you also that this is a way that many of our competitors have chosen to go for in the years, and I would say in the last four to five years. A lot of growth in our main competitors has been inorganic and has come from consolidation of the market. With our nearing independence, we will certainly be at a better place to participate in this tendency and to use it as a value creation element also for tk accelis. That is in summary what is interesting about the portfolio. It has potential to become better.
There is margin uplift that can come from acting on the plans that we have laid out, maybe also strengthening some of the units with additional invest that they did not get before. So there is an intrinsic potential in the portfolio. Then there is the fact that if we do large portfolio actions in terms of divesting or closing, it will always free up the cash that it then takes to finance other M&A or organic actions across the portfolio to just move to a higher value margin business. No business without people. As our CHRO is now a role being practiced also by our CFO, I can share with you that we are hopefully very close to getting a new CHRO on board. We did not make it for Capital Markets Day, but we will have a CHRO.
Until then, Daniel will tell us something about our people and about ESG.
I like to start this section with a short reflection about the last month. I am a big believer that this spin-off creates a momentum in the whole organization, and it is a catalyst for change and performance. Personally, having already engaged with many of you in around 50 investor meetings so far, or also with many financial institutes to set up our standalone financing, that experience has highlighted one point very clearly for me. There is a big difference in terms of ownership and accountability, being part of a big conglomerate and preparing for independence. This is not all around only here the motivated management team. I believe that goes across the whole organization. To give you a tangible example from this, I like to share a short video clip. This clip is about our brand launch event of June.
That was the moment when we were changing company names from thyssenkrupp Materials Services to tk accelis. Firm up. That was exactly an example of the momentum I was speaking about. You have seen that we have broadcasted this event from three different locations, from Southfield in the U.S., Dortmund in Germany, and from Budapest, also reflecting our international footprint. Besides the people attending in these three locations, we had around 3,000 people dialing in. Many of them did this as a company gathering, enjoying this moment, as you have seen on the pictures I shared. Looking ahead, we want to use this independence to become more agile and efficient, have faster decision-making, and also have a clearer accountability. This also means that we will have a governance model which is better fitting with our business model.
Please remember this, when I come later to the finance part, you will see that our overall corporate cost with becoming independent will go down. We also better like to align our incentive system of our people linked to the midterm target, that we also have a matching alignment between our people interest and the interest of our shareholders. You all know that in a spin-off process, this is also, to a large extent, a technical process. We are preparing our combined financials, we are changing legal forms, putting new governance in, have the spin-off documentation. I deeply believe the biggest contributor is the cultural dimension in the spin-off. It changes a different context, and we all know that context changes behavior. That is more important for me than just changing a legal form.
Looking into ESG, what I have personally experienced during the successful restructuring in Italy in the stainless steel mill, there is a clear linkage between improving overall profitability, at the same time also improving in terms of compliance or safety behavior. Speaking about environment, you see that we have already made good progress. Being part of thyssenkrupp, we are also part of the thyssenkrupp CO2 emission reduction targets, reducing Scope 1 and Scope 2 by 50%, and Scope 3 by 30%. This until 2030. You also see here reflected our understanding of target setting, because you already see that in 2024, 2025, we almost achieved and overachieved these targets. Speaking about our people, we have 15,500 people working for us across the globe, fitting to our global footprint.
We are a very diversified company, and you also see that we are able to manage this very well, also from an HR perspective. You see that with the business opportunities in the U.S. and the investments we have done, we have increased and onboarded employees in North America. At the same time, also, as Carl has laid out, with the right sizing measures, especially in Germany, we were also able from an HR perspective to reduce our workforce, especially here in Germany. Speaking about our momentum, what is also very encouraging for me is that in this transformation, getting to independence, the employees are trusting us. I think a good sign is that in our latest employee survey, they have voted out from a scale from one till 10, the overall satisfaction rate with 7.2. Besides an environmental framework, we also have our social and governance framework in place.
You also see that we here also meet, we have done good progress. We increase the share of women in leadership position, and we substantially reduced the accident frequency rate to 1.4. I consider this is a really benchmark also in our industry, and it shows that the company is very well managed. Looking ahead, we will change now our governance structure. More importantly, we will have a different context, and we will be able to adapt our behavior. We will have the full management focus on tk accelis level. This brings us a strategic flexibility also in terms of decision-making. We will be able to capture our growth momentum, having our own financing in place, and we will have an overall leaner organization. With this, I am changing hats again and getting to the financial part.
You already heard from Ilse and Kerstin about our company strategy and the attractive markets we are operating in. The BU CEOs have shown you how they intend to uplift their margin profiles. I will now put all these strategic and operational priorities together into our midterm financial framework, speaking about our sales growth targets, our midterm margin, covering our cash profile, financing and funding, and of course, the capital structure. Before going there, I like to start with a short recap. Always remember, first, we have shown resilience in the last three fiscal years in a downturn cycle by already increasing our share of value-added services after record high years in the COVID pandemic. Second, we currently see a positive momentum building with prices and volume increasing and increasing our margin profile quarter on quarter.
Third, we clearly see a margin uplift potential in our company by implementing our three strategic levers, value-added services growth, expansion in North America, and optimization and efficiency. Let's deep dive for a moment in the current trading. I've already shown you how we were able, in the last fiscal year, to increase our margin quarter on quarter. If you add this up based on Q2, so end of March, you see that we have delivered in last 12 months EBITDA of EUR 390 million, and we were able to increase our margin from 2.3% to 2.8%. I think this shows the current momentum, and it also shows that in this fiscal year, we will already do an important step towards our margin targets. All of these figures are based on the thyssenkrupp segment reporting.
Once our Q3 figures are available, of course, we will share it with you, and we will provide the transparency not only on tk accelis level, but also on the business unit level. You will see later in the presentation that the biggest difference between the thyssenkrupp segment reporting and our combined financials is the thyssenkrupp AG corporate cost allocation we have to take in as long as we are not an independent company. As thyssenkrupp is guiding EBIT adjusted, you see that in the first six months of the fiscal year, with EUR 96 million, I'm orientating myself really up the upper end of this year guidance. Let's now speak about our midterm targets. On a tk accelis level, we have set ourself a top-line growth target with a CAGR above 4%. Our midterm margin target is between 4% and 5%.
The lower half range of this target is based on organic development, so meaning implementing our three strategic levers, whereas we see the upper end of the guidance towards 5% by doing active portfolio management. As I already said, we believe that in this fiscal year, we were already doing a good step towards this target margin based on the overall macro environment and based on the fact that we have already increased our share of higher value-added services. Speaking about organic development, the biggest contribution will come from increasing the share of value-added services in all three business unit. We will maintain the focus in increasing our higher-margin business in North America. In Europe, we will also increase the share of higher value services, but at the same time, we will also work in optimizing and get our business more efficient.
Speaking about our portfolio optimization. Here in Europe, we might consider selective divestments of companies below the target margin. I think that was Ilse pointing out quite clearly. At the same time, of course, we want to reinvest this money into bolt-on acquisitions in solutions, in manufacturing, in processing North America. On top of this, we are also open for other kinds of partnerships like joint ventures. I think here Heather pointed out a very good example that we are able to create a better throughput to use the spare capacity by collaboration without putting further investing into this business. I think it's a good example. We might see more examples. For this transaction, once we are progressing with the transaction, of course, we will provide for the future more details. Importantly, of course, we have defined these target margins for all three business units.
Let's start now with materials. In materials, our sales CAGR growth rate is around 3%. This is slightly below the market growth rates you have seen in our market segments. This also shows that we are very disciplined from a margin perspective in order to decide which business we want to grow. Our adjusted EBITDA margin target is around 3%. In the past, we have seen after the record years of Corona, that the volume was going down. Part of this volume reduction was also done intentionally by the right sizing measures we have done, mainly in Europe, to stabilize the business. We currently see a positive momentum, both from volume and price, also based in North America, but also more in Europe on macro trends we see in copper and aluminum, where we are very well-positioned, also with our manufacturing business.
On top of course, also with the tariffs and safeguards on both sides of the Atlantic. In terms of our midterm margin targets, we want to grow our value-added services business to uplift our margin, doing more manufacturing, having a larger footprint in North America based on these underlying trends, and at the same time in Europe, besides increasing the share of value-added services, optimizing our business. Carl has spoken about optimizing the business in terms of network optimization, product assortment optimization, and process optimization. On top of this, we see a margin uplift potential with selective divestments in the material business, mainly in Europe, and bolt-on acquisitions in the manufacturing. Let's speak about processing. Processing has a clear growth agenda. You see that our intended sales CAGR growth with 6%-7% above market growth rates. Our adjusted EBITDA margin is between 3% and 4%.
Also in the past, after the record years with Corona, we have seen margin pressure from the weaker environment, which we partly mitigated through strict cost discipline and optimization measures. We also see here currently a positive momentum building, and especially, we are benefiting from the ramp-up of the investments in North America. Heather pointed out our revenue targets we have on both sides of the Atlantics. In North America, it's about adding capacities in attractive markets, covering white spots from a regional perspective, but also from a product perspective where we are very good, like aluminum, and which also provides a different margin profiles. To the approximately EUR 500 million revenue target, this investment of EUR 100 million will contribute a meaningful effect. In Europe, whereas we are not adding new capacities. Here it's to increase our throughput by collaborating with the mills like Stegra or TKSE.
Also here, we have around EUR 500 million sales target, which we are able to capture based on this initiative. You see our sales targets are not based on market recovering, which is supporting at the moment. They are linked to clear initiatives. Business Unit Solutions. Our sales CAGR growth rate is roughly in line with our addressable market growth rates, and our adjusted EBITDA margin target for the midterm is between 12% and 14%. As Patrick highlighted, we have already done our homework also by divesting part of the business, which was not fitting to the margin profile of our solutions business, and especially by shifting our contract structure from a volume unit-based pricing to a value-based pricing with fixed fee for supply chain solution.
With this, we also have de-risked our business, and that is why we believe that we are able to provide a 2-digit margin target in any case. However, also here, as Patrick has highlighted, we also see in margin uplift potentials. We have shown you today our unique Control Tower, and by expanding our Control Tower with a special focus in 4PL and in supply chain solutions, we believe that we are able to increase the margin also in this business unit. You see that all three business units are contributing to our margin uplift potential. On top of this, we also foresee that our total corporate cost will go down. You see here in the tk accelis corporate cost also the transition from being part of a big conglomerate to getting an independent company.
We now also need to build out new corporate capacities, which are increasing, first of all, our corporate cost. Our midterm target is to have corporate cost between EUR 60 million and EUR 70 million. In the short term, so in this fiscal year and in the next fiscal year, we will also have transition-related one-off cost. In the midterm, we see the potential with digitalization and AI-driven processes to reduce our capital cost. I think it goes without saying that the thyssenkrupp AG corporate cost allocations I had to put in here in our combined financials because we were not yet an independent company. You know how the combined financials are working, that if you are not a company which is, let us say, fully listed or which is independent, then you have to take into account this corporate cost allocation.
These costs will go away from the first day of listing, and as we are very advanced with our carve-out activities, of course, I have a good view on our real corporate cost. This means that our overall corporate cost will go down from first day of listing. This sums it up from a margin perspective. With each of the three business units delivering to its target margin. With the corporate cost coming down between EUR 20 million and EUR 30 million. We will get to our tk accelis midterm target margins between 4% and 5%, the lower half end based on organic development and the upper end including portfolio optimization. With this, we have covered the top line and the bottom-line margin development, and I will now move to the cash flow and to the balance sheet point of view. tk accelis operates a CapEx-light business model.
I think this is really visible also if you take the relationship in terms of net CapEx to sales. Of course, looking forward, we want to invest more in our business, but there is an important message that this will still be a very CapEx-light business model. You also see this in terms of our midterm CapEx range, which we are expected to be between 0.5% and 1% in terms of revenue. Carl has spoken about the right sizing measures, the network optimization, mainly in Germany. You also see this in the divestments. Of course, if we have a network optimization and we own the warehouse, then we are able to sell it, and that was, of course, from a cash perspective, also an important contributor. Always keeping in mind that the majority of our assets are not fixed asset. The majority of our assets is liquid net working capital.
That is why it is so important for us to manage the net working capital very well. Having all the experience, the domain knowledge in materials, but at the same time also having the knowledge about supply chains, we are able to do this very well. You also see that in the last 3 fiscal years, so during the downturn phase, when volume and prices were decreasing, we were able to release a significant amount of net working capital. In terms of our midterm targets, also to give you for your modeling a reference, we believe that if you look on here on our year-end target, you can use the historic share in terms of net working capital to revenues to sales.
It is around 19%, what we would also foresee for the future. Of course, taking into consideration that is also the nature of our business, that within a year we might see inter-year swings where based on volume or price increases, net working capital can increase or decrease. Also, to give you here an approximation about a normal market situation, I would say that is around 20% and 30%. Of course, I cannot estimate all super cycles we also have seen here in the past. Importantly, this will be backed up by our new financing because the new financing will be an asset-based lending facility. At the point of time now, when prices move up, our inventories and our receivable move up, and this means that also our borrowing base for the asset-based lending facility move up as well.
The solid, resilient performance over the last 3 years and the release of net working capital, that is also visible in our free cash flow development. You see that in the last 3 fiscal years, we have accumulated around EUR 830 million in terms of free cash flow. This shows that we are able to manage net working capital very well, but at the same time also have a very solid operational performance in our business. You also see that we were very diligent and disciplined in terms of our investing cash flow. Let us now move to the balance sheet, to the debt side. You see here the development of our lease liabilities and lease payments.
I think also this underpins the asset light character of our business because, as Patrick, for example, pointed out, many of these leases, especially in the solutions business, are clearly linked to customer contracts, so they are providing the needed flexibility we need in our business. Looking ahead, I think it is a fair assumption if you model the lease development overall with our top-line development, and especially the development we see in our solution business. Besides the lease liabilities, we will have in our debts the usage of our new asset-based lending facility. This was a really important milestone for us to have a committed EUR 1.7 billion ABL facility in our way to independence. It was based on a syndicate of many international relationship banks.
It's a best fit to our business model, as I explained before, because there's a clear link between our net working capital-driven cash flow development and the borrowing base we are using in our ABL facility. The ABL is fully committed for the next three years with two one-year extensions option. This also gives us the flexibility in terms of times over the years. And of course, you also see that we will have the strategic flexibility when it comes also capturing growth opportunities we have in our business. Now, in order to give you a flavor, how we think about in using this ABL facilities and at the same time also the lease development, I will now get to the capital structure.
If I speak about our capital structure, I take into consideration the cash in hand and at the same time, the lease liabilities and the future use of our new committed ABL. Our midterm financial target is to have here a year-end leverage below one time EBITDA, taking into account that, of course, as I said before, the ABL usage could fluctuate inter-year based on net working capital development. I believe this structure is prudent and at the same time also gives us the strategic flexibility for the business opportunities we see. Let's now move to a non-operational balance sheet items, our pension. I believe our pensions are well managed. You see that the net benefit obligations around EUR 500 million, broadly stable. You see some changes linked to remeasurements, linked to interest changes, for example, and pension benefit payments.
I think it's very important to consider that these well-managed pensions have a very limited impact on the underlying performance of our underlying operational business. With this, let's put everything here in the nutshell. I think I shared here our midterm financial targets. I've covering also the additional financial building blocks you may need for modeling our business. On top of this, I think what I have not yet touched is that with a dividend policy between 30% and 50% of net income, we also will be an attractive dividend payer. Let's sum it up from the financial point of view. First, we clearly see a margin uplift potential in our business. Our margin target is between 4% and 5%, the upper end of this guidance based on active portfolio management.
We have clearly defined the levers, and we are, of course, also splitting the targets and the levers down to the single companies where this is measured, also based on transformational KPIs. This business model, our company, has always shown a very strong cash performance based on the fact that we are a CapEx-light business model and that we are very good in disciplined working capital management. Our clear focus in terms of capital allocation will be that we will prioritize also self-help measures, meaning selective divesting, in order to use this cash in higher margin business throughout our portfolio. And last but not least, we have, with our ABL, the financial flexibility to manage this business throughout all cycles, to have a long-term security in times of financing, and also have the strategic flexibility when it comes financing business opportunities.
I think with this, we have built up a strong financial platform, which enables us to uplift to this margin potential and increasing returns for our future shareholders. With this, I hand over to Ilse for the last remarks.
Yeah. Thank you very much. Daniel already made actually a quite good summary, but let me sum it up like this. I am pretty sure that we were able to convey to you this is absolutely a unique asset. It is unique in the fact that it is a materials company with a long history, and it has this incredible lever of building solutions for complex supply chain. The financial performance is strong already today, and we have a clear plan to strengthen our financial performance. That clear plan is based on three repeatable levers. The BU CEOs have laid that out. It is about more value-added services in each of the business units. It is about expansion in North America, and it is about becoming more efficient in terms of our productivity, but also in terms of the efficiency in our portfolio.
We are playing into markets, that is what Kerstin has laid out, that are clearly favorable. We know where we need to continue to play. We have our 250,000 customers in that market. With the nearing independence, we will be able to be more agile, to be faster in decision-making. We will be able to incentivize our people in other ways that we have done until now. We will be able to use the cash, and you have seen that we have generated cash. We will be able to use that in investments that will increase the value of the company. We will have fit-for-purpose instrument. One was the ABL, but if we think on our trading, for example, there is more things we will be able to do with fit-for-purpose financial instruments.
All of that will translate into a company that will accelerate growth, expand its margin, that will be able to participate in industry consolidation, and that will be more efficient in its own processes, increasing its productivity, but also in the returns that it can get from its portfolio. I can share with you at a closing remark that it has been a long-term aspiration of myself to stand here today with my team and having the occasion to share all of that with you. It is hard to bring on the words. This is a very important milestone for us. We hope that we were able to convey some of the potential of this company. I can assure you that we are highly committed to bring this company forward, to grow it, and to expand its margin. Daniel has laid out the midterm targets.
We find them to be ambitious, but we certainly also find them to be achievable. Thank you very much for your attention. Now it is over to Veronika again. Thank you.
Thank you, Ilse.
You are welcome.
After a very quick setup of the stage, we are happy to take your questions. If you are in the room, just raise your hand. Someone will provide you a microphone. Please also be so kind to state your name. It would be highly appreciated. For those joining via the live stream, we have a chat function in the stream. If you have a question, please use the chat. With that, I ask the executive leadership team back on stage.
We have a question over here. Thank you.
Actually, I have 10 questions, but I will wait it and come back if there are not that many questions. First one, I think the finance part was well covered, but I would just like to know a little bit about your risk management strategy, because obviously you are a fairly low-margin business, and in terms of the Value at Risk every day from commodity price movements, do you have VaR limits? How do you manage that actively? Then from a pure reporting perspective, would you take mark-to-market value of your inventory every quarter, or do you pass it through the P&L only when the product is sold? That is the first one.
Yeah. That is the first one of 10.
Yes.
Okay, I think we have more opportunity after. Let me take the first one about risk management, which, of course, is very important. I think what is really important is that we are a long time in this business, and we have the domain knowledge in materials, but we also have the domain knowledge, let us say, when it comes of understanding the supply chains. That is why it is so important that, of course, we are also able to manage our inventories, let us say, very well, especially in market phases when material price is going down. That is normally when we also see the higher turnover rates with our inventory to get out of this risk, let us say, immediately.
I think you also have seen it, that when I showed the past historical financials, that we were able, after the record years, not to lose what we have gained in these years, in the last three years when the material prices was going down again. It is all about managing our net working capital in this regards. On top of this, part of the material where we have the exposure to material cycles, that not for all business is the case, but part of the business, especially in the material business where you see the volatility. We also to hedge some of them, so we, for example, hedging the nickel content for stainless, we are hedging aluminum, and also copper. Where we see the correlation, let's say, with the business, steel is not able to be hedged in this regards.
On top of this, I speak about the whole net working capital, we are also very prudent when it comes in terms of also managing risk in our receivables, that we have here also a clear focus on the risk profile. This is centrally managed, as you can assume, because now also we take all of these receivables or many of these receivables for our financing in place. So we really run in very low default risk in terms of risk management. I have already covered the governance model. We were part of a big group which also had a governance model in place. Think that is also a good starting point for us to have a better-fitted governance model. But also in terms of all the normal risk mitigating facilities, speaking about internal controls, risk management, this what we are doing, of course, also part of the segments already.
This having said, you were asking more about inventories and then also, of course, let's say, the evaluation of inventories. This, we are already currently doing on a monthly base. Of course, it is audited on a quarterly base based on our quarterly figures. These are price effects. Besides the effects what we see there when material prices going up or going down, we see in the margins. So this is well covered.
Sorry, can I just clarify that you do not have a quantitative VaR limit per day or per week that you monitor, and the hedging policy is a bit ad hoc? Like you decide when to hedge rather than-
No
Any time you have a nickel content, you hedge it automatically.
No. We look into our material, what is our nickel content, then based on the nickel content, we will hedge the material, but only for the business where we see the correlation with the fluctuation of the inventory prices. As we will have more now contracts also based on fixed price indices, or solution contract. There, this is not anymore applicable because there we also do not see, of course, the fluctuations of the material cycles.
We have a very clear hedging guideline, so it is not an ad hoc event.
Yeah
We also have an AI-based model which is supporting us in making sure that we hedge at the moment where it really compensates the movements in the market, specifically for copper, that has shown to be very resilient in the last couple of months. It is actually a solution that has been developed by our team. Patrick talked about pacemaker. It is our own forecasting tool that we are using to optimize our hedging strategy. Yeah.
We are clearly not speculating on prices with our, let's say, inventories policy. That is clear.
Thank you. Maybe the second question for Patrick. You have EUR 110 million of subscription revenues in your business. The total EBITDA is about EUR 149 million. Again, very naive question. Is the non-subscription margin close to 2%-3%? Is that the way to think about it?
No. If you think about where the subscription is coming from, those are the intelligence layer, right? You would have the brain work, you would have our experts, the domain knowledge, and the digital solutions. You can imagine that digital solutions are at a way higher margin.
Thank you. Thirdly, just to get a sense of the operating leverage to the business. At highest level, EUR 11.7 billion of revenues. Your input costs in terms of the stuff that you buy from your suppliers is about EUR 9.4 billion. You have 15,500 employees taking roughly EUR 100,000 per employee cost. That is about EUR 1.6 billion of employee cost. The real leverage comes from expanding revenues without expanding headcount and warehouses. Do these numbers make broad sense, or is there something that I am missing?
Yeah. I think your calculation of the overall personnel costs are a bit too high. I would more consider it is more than EUR 1 billion. I think more importantly, I think what we have shown you is that in terms of our strategy, we want to increase, of course, each business model with a higher share of value-added services. Of course, this also brings new cost into it, but the overall margin profile is of course, totally different. That is how we intend to increase our overall margin profile.
Yeah. If you look at the historical development of our personnel figures, we did not bring them along, but I think you can even see them in the segment reporting of the AG, is that, of course, since we started digitization, and Carl has pointed out how much of the customers that we have in the long tail of the 250,000 that do transactional business with us. This is of course, very rapidly increasing to become a non-personnel activity. This is all either directly connected through EDI or we have the people serving, putting in orders through the self-help portals, et cetera. So there is, of course, things we can do in terms of personnel to increase efficiency and then build on that the margin expansion without having to increase the personnel cost.
I just want to give opportunity to other people to
Hello. Good afternoon. I stick to two questions on my side. I am Maxime Kogge from Oddo BHF. First it is on the strengths and trade framework in Europe. Since the 1st of July, import quotas have been cut by half. Out-of-quota duties have been doubled to 50%. That is a massive game changer for the steel mills in Europe. I wonder to what extent it was also a game changer for you. I think steel makers are forecasting a 10% increase in volumes. Is this the kind of volume increase you could aspire to as well for distribution, or is it more complex than that? Because I guess that you will perhaps gain some volume from domestic producers, but perhaps lose some from imports. Yes, that is my first question.
Yeah. For us, the increase in terms of volume is of course not directly related in the way that it is, for example, related to the steel mill or some colleagues of the steel mill here today. We look at what will happen on the demand side, and a more closed Europe could also ensure some more demand in Europe, and that's for us important. Where it does become interesting for us is, of course, how is material price developing? How will the steel price develop? We have seen already some uplift. We need to see now, by the time that exports are running dry, whether this will push again price increases, which could have a short-term effect on our earnings.
But most importantly, we can say, and I'm anticipating a little bit of question of Bastian, who just asked a question in the chat who goes in that direction as well. What we do see, of course, independently whether North America and Europe, higher material prices account for higher margin. There's some absolute correlation in there. Of course, apart from the one times effect that you have, that Daniel explained, that prices go up and then you have some additional profit. But in general, we think it's going to have a positive effect on European market, and it's going to have a positive effect on our margin. Yeah.
Okay. Thank you. The second question is when I look at all these steel distributors, actually, the results tend to be very volatile, and that's especially due to this high inventory valuation adjustment gains or losses. Will you communicate precisely on the contribution to underlying results?
So with Excuse me, I didn't want to
No.
Yeah.
And-
Yeah
and yeah, perhaps related to that, what is actually the baseline that we should consider for future EBITDA growth progression? Because I guess some of the existing base is already distorted by these adjustment valuations.
Yeah. Let me answer this. I think you see two effects. One effect is accounting effect in terms of inventory valuation. The more important effect is, let's say, the impact on the operational margin development in a business like in materials, which is transactional, where we have bought the material upfront and then sell it depending on market situation, on a higher price level or a lower price level. We also provide you, first of all, here transparency by clearly differentiating between our materials business, our processing business, and our solution business. You will also see that we are providing transparency in terms of top-line development. What is coming from the current positive momentum we see on the price side, but also based on the volume, let's say, increase of our business.
That I think you can work with this transparency and also to figure out, let's say, roughly what is the underlying effect also in the short term on the margin is. Importantly, is that we are focusing on the measures to have a structural margin uplift in all three business model to reduce our volatility from the cycles we currently see, especially in the materials business.
Maybe before we go on with questions in the room, we gather the one we got in the chat. Bastian from Deutsche Bank had two more questions. One is already touched a little bit. Please contrast policy implications for metal trade protection in the U.S., where you are competing with mostly independent distributors versus Europe, where some of your competitors are tied to integrated mills, and do you see any implications or new challenges for your European business model?
Yep. I touched on the element
Yeah
of protective measures in our environment and the way that influences prices going up. We have seen in North America also carbon steel prices going up, and the collateral advantage it creates for us. In terms of competing with mostly independent distributors, we consider ourselves to be a very independent distributor. For example, in processing in Europe, this is what really sets us apart. Heather explained that in the different way to market that there is between North America and Europe. We do think that, and also with our local-for-local approach, as I explained, between 80% and 90% of what we buy in North America is sold in North America. We actually can compete there at the same level as any local player on the market.
The second question was: The corporate cost line looks quite large. Is this all pure corporate costs, or is there another item there such as intercompany consolidation? Also, what is the timeframe for normalizing corporate costs?
Yeah. I think I have shown you around EUR 90 million corporate costs up to EUR 100 million. Always take into consideration that EUR 32 million to EUR 37 million of this corporate cost development was based in the combined financials of the thyssenkrupp AG corporate cost allocation. It is also a technical instrument. I do not know how familiar you are with the combined financials, but as we are not yet a standalone company, I have to take a share of overall corporate cost into our P&L. I think this also change, as we are speaking about changing context, that we will get more efficient overall in thyssenkrupp, of course, with the new lean setup, and especially here in Materials Services business.
This 32, EUR 37 million, this will really not occur anymore once we are a listed company and we have a very good view on the cost we now have to incur to be a standalone company. I also referring to that, of course, in a transition like this, also in this fiscal year, but also in the next fiscal year, we will have one of related transition costs, which are, of course, for this and next year will show a slightly higher corporate cost base than the midterm target. If you would exclude this, we would move directly to this midterm target guidelines. They are to a lower extent also some consolidations topics in there, but the majorities are pure cost.
Also, for the cost, we see that we do not want to split this cost also to the different businesses because we do not consider them as operational, like for example, some insurance-related cost.
Right. Do we have further questions here?
Hi. Felicity Robson from Bank of America. You operate across roughly 400 sites. How concentrated is the profitability across these sites?
As you can imagine, we have shown you also the development across the three business units and our target margin. I think it's a fair assumption that we have sites and of course, also single business, which are operating above this target margin already today, and also ones which are targeting below. That's why Ilse was speaking about also our strategy that we put in place for each of the single companies a target margin they need to achieve. That's why we were also speaking, when we are speaking about of active portfolio management, always taking into consideration that the majority of our assets is liquid net working capital, that we also, of course, always think about where also in terms of net working capital we want to invest in our money. Carl, you mentioned it also when you were speaking about optimizing our product portfolio.
This is also in terms of cash generation, of course, an upside we have in our business.
Yeah. I think in general, if you look at what drives the number of sites that we have, there are different parameters. There's a large part of these sites which are actually fully customer dedicated in the part of Patrick's business, and then the profitability is really locked into the contract. If we have a huge warehouse for Rolls-Royce, for example, that is a fundamental part of the deal that we have with Rolls-Royce. Then there are, of course, other assets that are different from size. Some of them, if we are in a region where we are market leader, in Germany, we have consolidated quite of a number of the sites to make sure that we have a scaling effect. Because of our local-for-local approach, as I said, we actually want to talk the language of our customers everywhere we are.
We also have, if I look at upcoming regions in Eastern Europe, we have smaller sites being at place to make sure that, for example, if industry consumption picks up again in Ukraine, we have our warehouses set up in Romania, in parts of Poland that are smaller in size, but that are there to be and to fulfill our local purpose. I think it's these three elements. It's large warehouses in regions where we have a big reach and where we can scale a warehouse. It's warehouses that are completely integrated in customer contracts. Then there's the ones that are smaller in size, but that are really driving the purpose of our local presence.
Thank you.
We also had a question in the second row, but then we do it after.
Yes. Thank you very much. Lars vom Cleff, also Deutsche Bank. I've got the same luxury problem, far too many questions. I have a possibility to ask especially the business unit, CEOs at a later stage. Maybe one for you as the CFO. We talked a lot about you managing your net working capital, and that is both for a company like yours, a major risk as well as an opportunity when it comes to profitability. You said that you're buying material in advance and then maybe selling it at a lower or higher price. Against that background, I'm wondering, can you split your inventory level into, let's call it trading positions, for which you do not yet have a customer contract, and the percentage figure of your inventory level, that you hold on a commissionary basis or commission basis?
Yeah. I would give you rather an indication also based on the three business units, and that's why also we believe that it's right to give the transparency with our new segment reporting. in Carl's business, in material business, this is a transactional business. A customer calls today and wants to be delivered within 48 hours. This means that, of course, we are not stocking for a single customer. We are stocking when a customer needs the material. The largest extent is, let's say, therefore, based for all customers, and it's not a clear linkage to a contract. Importantly, of course, we are able to sell this material to many customers, so it's not a risk that we have here a customer-specific material in your open stock. Partly, we also have contracts here, customer-specific material, but once we have customer-specific material, then they are linked to contracts.
Now coming to the processing part, as processing has more frame contract, more contractual, you will also find a larger extent of customer-specific material. Therefore, this is also matching with the more contract structure of the business. Last but not least, as we have said in the Solutions business, here, most of the time, we do not own the material anymore. If we own the material, then we do not have any price risk. Then it is also really the customer material, let us say, just dedicated for the customer, and we are putting on top, of course, a margin on it for our financing or margin improvement.
If you may just briefly add to that, it is tempting to want to have a difference between what part of the stock is not allocated and what part of the stock is allocated. But the true secret is, of course, to manage the two well together because you can have allocation and non-allocated part, and sometimes it is the same kind of material. So the real secret lies in managing the totality and then knowing how you can best anticipate what of, let us say, stainless steel 2 millimeter you have already locked into a contract and what do you want to keep at stock for transactional action. So I think this is where the balance lies in being a good distributor. Not in double-stocking, but in having the product as one product SKU and then manage a good balance between non-sold and already booked in contract.
Then, of course, if we talk at Carl's business, anything which has a component of manufacturing, especially advanced manufacturing. I am not saying basic manufacturing, it is as transactional. You cut it to 3 meters, cut it to 6 meters, can be done within 48 hours as well. If it is advanced manufacturing, like water jet cutting, all of that is, of course, contractual and always set at a fixed price level.
I guess I need to follow up on that later. Then maybe a quick one for you, Ilse, before finalizing with an open question for you. You make clear that the group and all divisions aim to grow in the U.S. and significantly want to.
Yes
grow in the U.S. Have you set a cap on your U.S. exposure, such as a maximum share of group revenue you want to achieve at some stage?
I think what we are focusing on for now is the long-term and the long-born project that we had before. We know exactly where we want to play now. We had this plan laid out for the last two years, and we will act upon that first. Then as always, there was a question to risk management. We believe that we are a global company, that we have these two legs to stand on, North America and, when I say North America, I also mean Mexico actually, and Europe, and we will always balance that. We think there is strength in having these two parts and being the largest global player in the Western Hemisphere, as we like to say it. Yeah.
Then unfortunately, please allow me to quickly be the party crasher.
The party hasn't started yet. You can't crash it.
Is that a promise?
For sure.
The last four and a half hours we spend on all of the opportunities and chances for tk accelis. I would be interested in where you see the major risks, threats?
Yeah. Look, we are a global company. We are in an industrial environment. Any risk that there is today in industry is a risk that we manage, is a risk that we try to mitigate by really participating in a core belief that we have at thyssenkrupp, which goes above and beyond tk accelis, is that we believe that for a region to be prosperous, it needs to have industry. And we are participating in that by offering solutions to customers that they can remain active in region, that industry can still take place. We understand the risks of being in industry today. It is the risks around supply chains, and we offer them. But of course, we are not blind to all the challenges that both regions have. Europe has its challenges in industrial environment, and so does the U.S. have.
I think as we own this domain knowledge, I think we are at a good position to anticipate, as we have done. If you look at our history and you know our company for a longer time, we were also able to manage the changes that happened after 1989, when Europe was enlarged with Eastern Europe, et cetera. We have experience in that, and we find it challenging to do that together with our long-term contacts, our long-term customers and suppliers and investors.
We had another question in the back row.
Thank you. Philip Taylor, also from Deutsche Bank. I suppose I was thinking about this question when we were listening to the Business Unit Materials presentation. I think, and I wrote this down, I could well be wrong, I think you said the bottom 50% of the customers are about 3% or 5% of sales. I think, later on there was a quote about the efficiency potential within the portfolio. I couldn't help but think, what's the efficiency potential within the customers? Because if a very low number, I think it was 4%, of the orders are processed via EDI in Germany, I'm sure that it sounds to me like there's a lot of inefficiency in dealing with what I suspect are quite small customers.
I wonder, what's the profitability of that bottom 50%, and is there a case here of too many customers for too low margin or no margin?
Thank you.
Let me correct the statement. I didn't make any statement on a customer split, neither upper or bottom half. I think the only number that was on there is that we said that the top 10% of the customers make up even a small portion. So it's a very highly diversified customer base.
Oh, this is digital.
It works.
Digital.
We said the bottom 50% of the customers contribute less than 3% of the sales. That is the one that you are refer.
Yes.
Sorry. Okay.
What is the profitability of those customers?
Yeah. Typically, we see that smaller orders also typically generate a higher margin. I think there is a good correlation to that. So of course, larger orders and larger customers also have a positive buying power that they also exercise. So there is a correlation to that. Yeah. When we say how we look at our customers, and Patrick has also been selective in his customer selection, there is a cutoff period where we say there is either a customer order that is too small to handle or it does not provide the right value for that. So there is a good correlation, I think, to how we manage the value of customers. Now, if I go back to the automation potential, the 4% of orders with EDI, the direct interfaces that we build is typically with larger customers.
Where we have a lot of regular volumes, a lot of regular orders, repeat orders also. Where it makes sense to invest in a direct interface, where you see that a lot in the automotive industry, for example, and you see that in other industries as well. Where larger OEM customers, for example, or key accounts want to link directly to our order platforms so that they can pass through the orders. I think the more critical figure here for that long tail of customers is the 21% that I had mentioned just for Germany alone, where customers already place orders directly into our system, reducing or almost eliminating the need for manual effort. This also increases the underlying margin on those custom orders.
I think the other key figure here was the 58% of orders where we're using AI tools and other automation processes to again automate orders that don't just come in via the online platforms, but for all the other means of orders as well. There's still a big bulk of orders that we receive via email and other traditional means that we then can process automatically.
Yeah. Especially in smaller orders, price setting is done completely automated. Yeah. We have pricing systems that take into account a multiple number of factors that then decide on what is the price to which it's still profitable for us to sell, and that ranks from what kind of customer am I selling to, all the way up to what do I see in the market? Do I want to offload material? Do I want to keep sitting on my material? Do I only want to sell it to a certain margin, et cetera? That process is being fully automatedly directed. Also, the reduction of people that we've had, has specifically been, of course, in this part of the business. Then I'll give you my personal bold move on EDI.
I think EDI is about to find its last breath because I think there are so many new solutions out there for companies to exchange data that I don't know if this classical EDI Links that ask very specific similarities in systems of records to come together. I don't think that's going to hold a long period still. It's right, like Carl says, there are still companies that prefer to go that way. For us, it's not a target that we are particularly aiming for.
For us, it's important to build customer-facing portals that are easy to use, that customers are willing to go onto the portal and do some self-fulfilling activity there, or really making sure, and that's, I think, where we are most advanced, we call it Smart Order, that the system just takes from the mail or from any source a document and automatically sends it all the way up to the warehouse, where the first human is then interacting with it. Even there, going forward, it might be not always humans that interact then with the order. Welcome.
We got another question from the online audience. It's from Boris Bourdet, Kepler Cheuvreux, referring to the ongoing consolidation in North America. He asked, "Do you see scope for further transformational transactions similar to Worthington Steel's acquisition of Klöckner or Olympic Steel's acquisition of Ryerson? If so, which competitor would you view as the most natural strategic fit for tk accelis?
I have some in mind, but I'm not going to share it today. Let's say that, first of all, and I pointed out those two, and those two are big ones. Ryerson and Olympic, and then Worthington and Klöckner are certainly two very large transactions. That being said, I do think there's potential for similar larger transactions, but those do not come overnight. Lots of ducks need to come in one row until you can do some kind of transaction of that, I would say. With that being said, there are, I would say, slightly smaller assets that would really enrich both our capability and our capacities that we are targeting already, and that will help us forward there in industrial consolidation. Remember, again, for us, it's not so much about being the largest in carbon steel. Both transactions I referred are very heavily carbon steel driven actions.
Our strength lays in non-ferrous, in aluminum and copper, also in stainless steel, and the whole growth that we see there, EV, as Kerstin laid out, EV data center, anything which goes in aerospace and defense from a material perspective, also very little carbon steel. Maybe only the chairs. Is that in carbon steel, Patrick?
In defense you have carbon steel, but yes, otherwise it's mostly non-ferrous, yeah.
Yeah. But I was referring to the seats.
But the seats-
The chairs were the seat.
Yeah, that is only aluminum.
Yeah.
All right. Ephrem, second round.
Yeah. I am back to Ephrem from Citi. You alluded to unique financing, or I think interesting financing options once you are an independent company. Could you give us a flavor of what that is, which was not available as part of thyssenkrupp?
Yeah. Let us say, first of all, I think if I am speaking about financing, I think about different steps. First of all, this business has always generated cash flow, and now having our own ring-fenced financing in place, having our own cash flow, we are able to reinvest the cash from our business. That is one point. Second point is that, of course, we have discussed here M&A, but also portfolio optimization, also selective divestments. That is also another sort in terms of financing, reinvesting money currently bounded also in inventories with a lower margin business and reinvesting this into higher margin business. Then I have shown you our secured financing in place, our ABL facilities, which of course we can also use for the business opportunities, whether this is organic or inorganic, let us say, going out there. This also gives us, let us say, firing power.
Of course, once being on the capital market, this will also be a journey looking ahead. We can also think about other types of financing, restructure again our financing, having other possibilities in place, maybe also get to equity financing once. For the time being, our clear priorities are within the three levers I just explained.
Thank you. The term materials as a service was used a lot in the presentation. I understand some management consultant probably said it is a great one.
No, we did that ourselves. Actually, I must give credit to Kerstin. That was from when she was heading our-
But now he is going to criticize this, so let us wait.
Okay.
No, it gets you a higher multiple, so why not? Having the right terminology is important. But trying to define it quite strictly, the way other companies, like, for example, Glencore have defined it as, for example, you lend lithium to a battery manufacturer. Once the battery is done, you recycle it back.
Then it becomes a true MaaS rather like a SaaS, like Software as a Service. The way I sort of interpreted today's presentation is much more that, yes, you will be a lot more service-oriented and try to get more value from the service aspects you give to the customer.
Yeah.
But you are not planning to kind of essentially be a lender of metal across
the values, the life cycle of that metal and become a MaaS provider from that perspective. Is that sort of a fair assessment?
It is a broader interpretation of materials as a service. For us, it is really about adding the services around our material core. You interpreted that well. That being said, you are absolutely right that there are interesting opportunities going to arise from that. Some of that we are, of course, in our innovation department, looking into it. We are, for example, very triggered by what will happen with end-of-life cars. We have a known collaboration with Novelis, where we want to see if we can get more aluminum back out of end-of-life cars and use them to produce recycled aluminum. As a small activity, we have not talked about our innovation activities, but that is what we do, and it rang a bell when you said that.
We are certainly not aiming to play at the Glencore level, where we make a fully business model out of this. It is interesting, but we are not there.
Sorry. Stop me when I run out of-
One more, and then we go back to the chat where we have further questions.
Yeah. This is a fairly very big-picture question. Europe and the U.S. are both trying to build strategic reserves of critical metals. It is not clear where those metals will be held or how they will be held. Do you see that as an opportunity for tk accelis to be essentially a sourcer and warehouser of these critical metals?
It is certainly not labeled today as big growth markets in our strategy, but it is, of course, something that we are looking at. If you look at Patrick's business, we do have logistical solutions for batteries. Of course, we work with customers that are dealing with these questions. So anything around recycling will be very important if it comes to independence, specifically in Europe, with regards to raw materials. Again, it is something which we have in our innovation bucket, and that will be very interesting to follow up on. Yeah. Thank you for your question.
Yeah. Right, so we got another question from Bastian. Again, it is about the vertical integration and materials, both and downstream. So which are the key areas of focus, and would it be fair to assume you rule out a potential involvement in a steel mill also? I think my guess, it is back. Also what-
What is the M&A wallet? I think you
Yeah.
What is the M&A wallet before divestments, and is there already anything in your portfolio where you consider a sale to release cash? Maybe to the vertical integration, I maybe said that wrong, but vertical integration in materials is clearly downstream. With that, we are certainly not getting involved in a steel mill, so we should not have that rumor out there. It is vertical integration downstream, and the reason why it is downstream is exactly for what Kerstin explained. It is this sentence, assets will be held by those who can scale them best. For us, it is we have this right to play in the manufacturing because we see that from the scaling or descaling activities from our customers, it makes sense to group some of these manufacturing activities and then just have a better productivity or a better cost-competitive position also for our customers.
It is clearly downstream, and we have been doing that in Europe, but actively also more in U.S. already over the last 2 years. In terms of whether we would give out now if there are any assets that we would divest, I would refer to what I shared before. We have laid out these targets for each of the group companies. We are conscious that some group companies had plans on which they could not act because of the restrained cash position that we were in. It is not that we are going to give them endless time, but we do want to move forward first with some of our restructuring and re-strategizing activities. Then, we will take it from there.
We have another question.
Yeah, just one last on my side. Maxime Koch from Oddo. In the previous CMD material, there was actually a ROCE target at 9%, so I was wondering why you had dropped this kind of target, because profitability is just a part of the picture. You also provide CapEx guidance, but it is also just one part of the whole equation. And where, sorry, where do you stand on that metric right now?
Yeah. For us, it is also a question of focusing. We clearly see a link between increasing our margin targets and then also being better in terms of return on capital employed. That is also a figure, of course, where we take it in our internal, let us say, financial steering. To make it easier, we have defined the clear parts in the margin uplift. But the whole presentation is also becoming more efficient also on the capital employed part, getting to higher margin profile, and therefore, this goes along, so it is not a contradiction or something in that regards.
Right. We have
Third time, right?
Yeah. We have time for, I would say one, two more questions.
It has to be you again.
On the processing business, it's quite interesting that you are doing more in that. But at what point in time do you almost become a contract manufacturer, right? For example, if you cut panels and then put a bit of plastic in the middle, you made an insulated panel. Then you start competing with some of the customers that you have. Again, where does processing end, and being essentially a manufacturer of a product begin for you?
Of course, we mainly look then at whether it's capability expansions or capacity additions that are adjacent to and around in our current portfolio of activities that we undertake. You can imagine that there are some steps a little bit further downstream that are not maybe as far downstream as the materials business, but add value and actually are part of what our customer base requires. It's always on the basis of our knowledge, our expertise, what our customers require, and are we the best people to provide that service to the market. That is how we view it, and that is how I would make that assessment.
If I may, I'll just share one example that we shared when we were at the fireside. This is something we do for a leading OEM in U.S., where for many years we just delivered coils and then some of the processing on the coil, like slitting it or cutting it to length and some surface treating. Today, that was specifically after the pandemic, when that OEM realized that he had certain points of stress in the supply chain. We are actually managing 8 mills, 12 service centers, and 58 stampers. Only 4 of the 12 service centers are ours.
For us, the largest offering to the customer is with our domain knowledge, making sure that we manage these eight mills in terms of understanding their capacity utilization, making sure that there is optimal capacity utilization, not only in our four service centers, but in the 12 service centers across the network. Then delivering that into the 57, or it is 58, I do not know exactly, I think just one was added, on the stamper level and then securing that. This is really much more where we focus on and where we see then that there is potential for us to create value and also have a higher lock-in, of course, with the customer.
That is again, a propriety solution that we have worked out, which is similar to the digital Control Tower of Patrick, but which is still very much more linked to the customer and very customer specific here.
Maybe we will take one last question from the online audience. It is from Tom Barbic at BNP Paribas.
Given the current low water levels on the Rhine, what is the expected impact on your inbound logistics and delivery schedules for thyssenkrupp Steel Europe, and how are you mitigating any potential disruptions?
As I said at the beginning, we actually only have a very small exposure to materials coming from TKSE, so that is less than 7%. Our logistics solution with TKSE, because you might correctly say that, for example, the exposure in Heather's business is somewhat larger because there we do intensively work with them. Our logistic concept has always been on three levels. It is water, it is train, and it is truck. Of course, when this happens, and it is not the first time that we have this low Rhine situation, we then shift to truck and to more train in that case occurring.
Great. Thank you very much. I think we are now at the end of our formal part of the day. As mentioned before, we would be very delighted if you could stay for some drinks and refreshments in the Hithe + Seek Bar here at the hotel. It is at the other end in the hotel. It is probably also a nice opportunity to continue the discussion with executive leadership team. For those joining us online today, thank you very much for listening to our presentation. Have a nice evening, and hopefully see you later.
Thank you very much. It was a pleasure.
Thank you.