Ramkrishna Forgings Limited (NSE:RKFORGE)
India flag India · Delayed Price · Currency is INR
785.20
+3.00 (0.38%)
Nov 18, 2026, 9:15 AM IST
← View all transcripts

Q2 26/27

Oct 30, 2026

Summary

Q2 FY27 revenue grew 54.9% YoY to INR 1,405 crore, with EBITDA margin rising to 18.23%. Order wins, stronger H2 expectations and capacity utilization support the outlook, while freight and input costs remain pressures.

Operator

Ladies and gentlemen, good day and welcome to Ramkrishna Forgings Q2 FY 2027 earnings conference call hosted by 360 ONE Capital Market Private Limited. As a reminder, all participants will be in listen-only mode, and there will be an opportunity for you to ask questions after the presentation concludes. Should you need assistance during the conference call, please signal an operator by pressing star then zero on your touch-tone phone. Please note that this conference is being recorded. I would now hand the conference over to Mr. Dinesh Kumar from 360 ONE Capital Market Private Limited. Thank you, and over to you, sir.

Thank you. Welcome to all the participants on behalf of 360 ONE Capital Market for Ramkrishna Forgings Q2 FY 2027 post-results conference call. From the management, we have with us today Mr. Naresh Jalan, Managing Director, Mr. Chaitanya Jalan, Whole-Time Director, Mr. Lalit Khetan, Whole-Time Director and CFO, Mr. Milesh Gandhi, Whole-Time Director, and Mr. Rajesh Mundhra, Vice President Finance and Company Secretary. I will now hand over the call to the management for the opening remarks to be followed by question and answer session. Over to you, sir.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Thank you, Dinesh. Good evening, everyone, and thank you for joining us today to discuss the Q2 and H1 FY 2027 earnings of Ramkrishna Forgings Limited. I trust all of you have had the opportunity to go through the earnings presentation and financial results shared earlier today. Let me begin with a brief overview of the operating environment before discussing our performance for the quarter. The global economic environment continues to remain challenging with geopolitical tensions in Middle East, threats of new tariffs, and supply chain dynamics affecting economic activity and business sentiment across markets. Currency movements, rise in input costs, as well as the sharp rise in shipping costs also remain key areas to monitor. Despite these challenges, we are seeing encouraging business opportunities across markets and end-use applications supported by customer requirements for reliable and diversified supply chains.

In contrast to the uncertain global environment, the domestic economy continues to demonstrate strong growth momentum. GST collections were healthy, reaching approximately INR 6.15 lakh crore during Q2. Industrial activity has also strengthened IIP growth of 7.4% in July and 8% in August. The automotive sector has witnessed particularly strong demand, with commercial vehicle and passenger vehicle sales growing by 28.7% and 30.7% respectively during Q2 FY 2027. We have witnessed continued momentum in our performance, both in top line and profitability, supported by domestic demand, improving international business, and our focus on operational efficiency. Our efforts to expand our portfolio, enter new segments, and increase capacity utilization are contributing to more balanced and sustainable growth, even in the current backdrop of volatile and unpredictable global macroeconomic landscape. An important development over the past few years has been the significant expansions of our manufacturing capability.

Having completed a substantial part of our plant investment, our focus has now shifted towards improving utilization, increasing productivity, and generating better returns from these assets. Our investments have strengthened our ability to address a wider range of customer requirements and support our expansion into new products and applications. Let me now share the key financial highlight for the quarter. For Q2 FY 2027, consolidated revenue from operations stood at INR 1,405 crore, representing growth of 54.9% year-on-year, compared with INR 908 crore in Q2 FY 2026. On sequential basis, revenues were higher by 15.5% compared with INR 1,217 crore in Q1 FY 2027. Our consolidated EBITDA, excluding other income, stood at INR 256 crore compared with INR 123 crore in corresponding quarter last year, and INR 218 crore in Q1 FY 2027.

The EBITDA margin improved to 18.23% for the quarter compared with 13.5% in Q2 FY 2026 and 17.96% in the previous quarter. The improvement in operating profitability reflects operating leverage through improved capacity utilization, improvement in product mix, and operating efficiencies. Profit before tax for the quarter stood at INR 95 crore compared with a loss of INR 10 crore in Q2 last year and profit of INR 65 crore in Q1 FY 2027. Profit after tax stood at INR 71 crore. This was higher by 47% on quarter-on-quarter basis. Debt during H1 FY 2027 is reduced by INR 126 crore, and we maintain our guidance of reduction in total debt by INR 500 crore for FY 2027. Looking ahead, we remain positive about the business outlook.

Our order pipeline remains healthy, and our increasingly diversified product portfolio provides opportunities across both domestic and international markets. We believe that higher utilization of our existing capacity and improved product mix and continued operating discipline will support growth and profitability in the coming quarters. With that, I would now like to hand over the proceeding to Mr. Milesh Gandhi, our Whole-Time Director, who will take you through the order wins and key business development during the quarter. Thank you. Over to you, Milesh.

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

Thank you, Lalit ji. Good evening, everyone. I would like to take you through the new order wins during quarter two FY 2027 and share some updates on our key business segments. During the quarter, the company secured new order wins worth INR 673 crore across CV, EV, LV, and farm equipment segments. These orders have a program life of approximately four years and further strengthen our revenue visibility over the coming years. Of the total orders received, approximately 48% came from the domestic market and balance 52% from the export market.

We have secured orders worth INR 304 crore from the commercial vehicle and INR 272 crore from the light vehicle and INR 7 crore from the electrical vehicle side. Worth mentioning, against the new order wins, INR 447 crore comes from the casting side of our business, against which INR 272 crore is for the North American export market for light vehicle applications. This also opens our door to the exports market from our casting business. The passenger vehicle segment continues to be an important growth area for us. We are expanding our forging and casting capabilities and new product developments.

We are working towards increasing our presence in this market and adding new customers. We have also secured orders worth INR 90 crore from the farm equipment. This order win reflects our growing presence in the off-highway applications and our ability to serve wider range of customers. I would also like to share some updates on our railway business. We continue to see good opportunities in this segment, particularly for our fully assembled bogies, frames, bolster, and cast components. With the addition of new products and increased manufacturing capabilities, we are well-positioned to participate in the growing demand from the Indian Railways.

On the international side, we continue to work closely with our customers across North America and Europe. We find the market bullish across, and our expanded capabilities and presence in Mexico is also helping us explore new opportunities and strengthen our customer relationship. We are also seeing increasing interest in our casting, aluminum forgings, and higher value-added products. Oil and gas products demands are also strong. With several new capabilities and capacities now available, our priority is to ramp up our production against confirmed orders and improve our overall capacity utilization.

Going forward, we remain confident about our order pipeline across both domestic and export markets. Our growing product range and continued addition to our new customers should support business growth in the coming quarters. Further, our continuous efforts in new ventures within the boundaries of forgings and castings business in non-ferrous components and products, manufactured products from aluminum, titanium, Inconel, and Nimonic grades for aerospace, robotics, and semiconductors are also progressing well. That's all from my side. Thank you.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Thank you, Milesh. Dinesh, now we can open the floor for Q&A.

Operator

Thank you very much. We will now begin the question-and-answer session. Anyone who wishes to ask question may press star and one on the touch-tone telephone. If you wish to remove yourself from question queue, you may press star and two. Participants are requested to use handsets while asking a question. Ladies and gentlemen, we will wait for a moment while the question queue assembles. The first question is from the line of Vinil Shah from Dalal & Broacha. Please go ahead.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Thank you for taking my question, and congratulations on a very good set of results. My first question was related to our new and upcoming businesses. As we already mentioned in our opening remarks, INR 447 crore of orders from the casting business. I just wanted to know what is your update on the other segments also, like cold forging, aluminum forging, and the casting business. When will these orders be executed? What is the capacity utilization, and how it is going to ramp up? That is my first question.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Milesh?

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

Yeah. I think, as I already stated, that INR 447 order comes from our casting segment. I think in that you would have noted that INR 272 crore is coming from North America. That was for light vehicle application, and that also opens our door for export market. Apart from that, with regard to our aluminum forgings and also from our cold forgings, we continue to export these products to the North American market. Our capacity utilization in both these lines are more than 50%, and I think we are trying to add more customer base there so that our utilization increases.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Right. Sir, also if I am correct, for aluminum forging, our current capacity is 6,000 tons, right?

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

Right, sir.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Okay. My second question was with respect to our broad outlook for FY 2028 and forward. How do you see the domestic and export markets? Because the industry estimates for commercial vehicles are bit on a conservative side.

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think in FY 2028, we are looking at a strong market. Both in domestic and both in international market, in FY 2028 is going to be a strong market, and we don't see any conservative approach in the next year.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Okay, sir. Thank you. One more last question, if I could squeeze in. We have seen a very strong recovery in our U.S. business this quarter. I wanted to understand how much was from new customer wins versus how much was higher penetration or wallet share gain across our existing customers, and is this growth sustainable?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think we would not like to speak specifically in customer-wise detailing, but we can say that this growth is sustainable over, I think, with Milesh's statement, I think it is extremely clear our focus remains to grow our international business. Both in North America and Europe are our main focus area in terms of our growth. We firmly believe with the order wins which we have right now, our international business continues to gain traction, and we will continue to grow with the capacity additions we have already made.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Okay, sir. Just one follow-up. For FY 2028, you told it is a really strong market. Would you like to quantify the growth for domestic as well as export markets?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, no. I think we will not be able to quantify in terms of. We will only comment on the quarter performance. Going forward, I think we look at a very strong market in the next half of the year, and we will again provide a guidance after the full year results. I think it is good enough right now for us to comment only for the next six months. We see strong visibility and a very strong market in next six months' time.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Yeah. Thank you, sir. Again, thank you very much.

Operator

Thank you. The next question is from the line of Aditya from Old Bridge Mutual Fund. Please go ahead.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

Hi. Thank you for the opportunity, and congrats on a good set. My first question is on this casting order only. You have got INR 400 crores of new casting order. We are already running at 88% utilization. When will this new order start, and do the current capacity, do we have capacity to fulfill this new order that we have got, or what is the Are we envisaging some capacity increase in casting segment?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think Milesh will answer the first half of the question. In terms of capacity addition, I will only be able to say, right now we have enough capacity in terms of when we plan to do any CapEx, whatever it is, in the next fiscal year.

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

To answer you with regard to the casting order which we have received, out of INR 447 crores, INR 272 crores is for a North American light vehicle application. This application, by the time we develop the parts and samples, it will take around six to nine months for the validation to be over and then the regular supplies to start, because LV cycle is a bit longer. The balance comes from the domestic side. On the domestic side, I think this is a business which within the development period of 12-14 weeks, they start, and when the samples are approved, the bulk starts on.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

My second question is regarding CapEx. So till H1, we have done a CapEx of almost INR 390 crore, and over and above that, we have done an investment of INR 40 crore in the JV. In quarter one, we guided for INR 350 crore CapEx for FY 2027.

Naresh Jalan
Managing Director, Ramkrishna Forgings

So I think.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

Any reason for escalation of this CapEx number?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Basically, with the forging, past forging capacity augmentation which we have already done, these are only value-add capacity augmentation which we are continuously doing. With the market currently so buoyant and opportunity coming full scale from all nooks and corners, we will need to continue to invest in terms of our machining capability and value-add capability. I think we should be ending this year close to around INR 550 crore of machining capability addition throughout our entire group. In terms of our JV investments, it is within the amount which we had already committed at day one.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

Okay. Within the JV, are all the investment done which was committed, or more is left other than this? Lalit?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yeah. Aditya, the JV, still about INR 50 crore-INR 55 crore investment is pending. This will be done in next one year time. Partly we will go in this year, maybe INR 15 crore-INR 20 crore more in the next half. Rest will be next fiscal year. What Mileshji said, you can assume another INR 160 crore of CapEx for the second half, basically on the machining side.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

Okay. Got it. Now, as we have said that we will get this debt down, net debt down to INR 1,500 crore, I think this is net of cash and bill discounting. At a gross level, what should we thinking about the debt? Currently we are sitting on INR 2,200 crore of debt. At the gross level, what should be the thought process in terms of by the end of FY 2027?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yeah. When you look at March numbers, March number was INR 2,173 crore, and then the net of bill discounting about INR 2,000 crore. That is why we guided for the INR 500 crore of reduction to INR 1,500 crore. The guidance remains same. At the gross level, if you look at somewhere around INR 1,670 crore to INR 1,700 crore will be the number.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

INR 1,600 crore to INR 1,700 crore.

Naresh Jalan
Managing Director, Ramkrishna Forgings

That is including the. Actually, we do not take because bill discounting is not to recourse, and it is to Tata Motors, Tata Motors and other customer, it is on their lines. I think basically for us, that is receivable which gets knocked off.

Aditya Kumar
Investment Associate, Old Bridge Mutual Fund

Okay. Got it. Thank you.

Operator

Thank you. The next question from the line of Abhishek Jain from Kriis PMS. Please go ahead.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Thanks for the opportunity. Sir, in this quarter.

Operator

Sir, can you speak a little louder, please?

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Hello? Are you able to hear me?

Operator

No, sir. We can't hear you.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Hello?

Operator

Yes.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Yeah. This quarter we have seen that power cost has gone down, but other expenses is still high. When can we see the decline in other expenses to sales, and when can we expect that the EBITDA would cross the previous level of 20%-21%?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

See, on the side of expense, power cost is little down because there are some surcharges which has been reduced during the quarter. But on the other expenses, there is a significant increase in shipping cost, which is likely to remain for some time, and that's why it is elevated, and it will moderate only when the shipping cost goes down.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Okay. As we have seen a very sharp growth in the export revenue and the realization per ton, just wanted to understand that if that export numbers will increase, can we see a margin expansion of 2%-3% from quarter?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

See, certainly export will give us a margin, but expansion, but I will not be able to comment how much it will be in terms of percentage point, because it depends upon the product mix.

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think margin, right now, our aspiration is to cross the previous peak of the margin. I think we are slowly getting there, but I don't think it is going to happen in next quarter or the quarter after that. But every quarter, I think you will see an expansion in margin, and you have seen in past couple of quarters, margin expansion, 30 basis points to 40, 50 basis point margin expansion is there every quarter. I think we will continue to work on that, and I think very soon we are going to get to the peak margins.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Got it, sir. Sir, this quarter, our subsidiary performance has improved a lot. If you calculate the consol minus subsidiary numbers, we get that there's a significant jump in the margin. So, this margin is because of the casting business, or is there any other components are there?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Casting and oil and gas business.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Casting and oil and gas business. There we are able to do a margin of around 27% versus the standalone margin of around 17% to 18%. So, what is the reason of that higher margin over there?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

No, so margin is not 27% in the subsidiary business. It is about the same level what we do in RKFL, 16%-17%, maybe a little lower than RKFL, because there are sales from RKFL to the subsidiary and some sales from the RKFL. That is why that gets eliminated, the margin looks higher. But at individual level, subsidiaries are also making 16%, 17% margin.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Got it, sir. My last question on the export side, we have seen a very strong growth in North America, but still Europe number is weak. So, when can we expect the improvement in the European business?

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

It is not that Europe you can see weak. I think you would have seen that North America last year, because of the tariff issues, the market was very lull. If you compare to our total export numbers, if you see in the quarter two of FY 2026, it was like INR 277 crore versus this year at INR 424 crore. So, there has been a substantial jump. If you also see across the sales, what we have done is our numbers in Europe has also increased, and similarly in the INR 424 crore, the U.S. has also gone up.

Rather, we have increased more customer base in Europe, and Europe today as an overall aspect, if you can note, you will find that around nearly 28% was there. It has come up to 41% today in our total geographical breakup. North America is around 58% and Europe is 41%, versus two years back, it was just 28%.

Abhishek Jain
Head of Research and Fund Manager, Kriis PMS

Got it, sir. Thank you, sir. That is all from my side.

Operator

Thank you. The next question is from the line of Utkarsh Somaiya from Eiko Quantum Solutions. Please go ahead.

Utkarsh Somaiya
Co-Founder, CIO, and Principal Officer, Eiko Quantum Solutions

Thank you for the opportunity. I wanted to understand on your, I mean, you already told us about your debt repayment plans. Can you help us understand your finance cost of what should be your annual finance cost, or rather quarterly finance cost after you repay this INR 500 crore of debt? The next question is, in FY 2028, do you expect to also pay another INR 500 crore, or how should we look at it?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

See, finance cost will go down if we reduce the entire INR 500 crore of debt by almost INR 40 crore per annum. It is about 8% interest cost we are paying right now. That will be there. For next fiscal year, we aim to reduce INR 300 crore to INR 400 crore of debt for the next fiscal year.

Utkarsh Somaiya
Co-Founder, CIO, and Principal Officer, Eiko Quantum Solutions

And sir, you had earlier told us that you will be doing a 100 bps expansion in your EBITDA margin each year. Is it fair to assume you will end FY 2028 at 18% and then 19% and then 20% in FY 2029? Is that a fair understanding?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I think basically I would not like to comment on future years. This year, we are looking at, since last previous year guidance, whatever we have given in the earnings call or for the full year results in the month of May, we would like to stick to that, and we would like to not comment on what is going to happen in FY 2028. But we are looking at healthy margins, and with the current order books and the strong market, we look to continue with the momentum of both growth in terms of our utilization, top line, and the bottom line.

Utkarsh Somaiya
Co-Founder, CIO, and Principal Officer, Eiko Quantum Solutions

Okay. Sir, you said you aspire to go to your previous peak, so

Naresh Jalan
Managing Director, Ramkrishna Forgings

Yes.

Utkarsh Somaiya
Co-Founder, CIO, and Principal Officer, Eiko Quantum Solutions

Can you just give us some, like, one year, three years?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I don't want to give a timeline, stick my neck to it. I would like to basically We are working very hard to get to there, and we aspire to get to there, but I would not like to put a particular timeline. It can happen much before it also, and I would not like to comment on the basic timelines.

Utkarsh Somaiya
Co-Founder, CIO, and Principal Officer, Eiko Quantum Solutions

Okay. So, when you actually did achieve these 22% margins in FY 2022 and 2023, what was the environment like back then that you were able to earn such handsome margins?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think companies earn much more better margins than us. So, environment basically, it is The casting business is never a very high-margin business, and we are growing on our casting vertical. So, at a consol level, we are commenting on the margins right now.

Utkarsh Somaiya
Co-Founder, CIO, and Principal Officer, Eiko Quantum Solutions

All right. Thank you so much and good luck.

Operator

Thank you. The next question is from the line of Pradyumna Choudhary from Bohat Investment Advisors. Please go ahead.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

Yeah. Hi, sir. Congratulations on a great set of numbers. I have two, three questions. One was, I just wanted to understand if there was any element of inventory gains in our results due to, like, were we sitting on low-cost inventory?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I don't think we have had any inventory gains. I think our price increases, steel prices increased much more than what we have got in terms of from our customers in exports. So, I think domestic steel prices are right now crazy. So, there is no question of inventory gains. Rather, I think Lalit can comment exactly. There are some inventory losses only in terms of our exports.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yeah, correct. So, we have not gained anything. Rather, we have some negative carry on account of price increase of raw material that is about INR 6 crore-INR 7 crore.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

Understood. Great to hear that. Second, on the European side, sir, of course, U.S. business has seen a very good growth. But on the Europe side, even the current quarter, year-on-year there was a slight decline in terms of absolute revenue. Could you give us some more sense of what's happening there and then, like, are we There's some business which we have to start for us on the European side?

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

I can comment here. See, it's not that there is a drop. You can always understand that there are capacities and there are schedule lines. We try to sometimes adjust with regard to the demand coming from the areas. North America suddenly went for a quick recovery after they were lull for the last year. We had to give some more patronage to North America, so that they get the material because of the immediate increase in the demand. This European side, whatever you may have seen a very marginal difference, this can always be covered up in the next quarter. Lastly, we focus on the overall export breakup, and I think overall export breakup has been good as compared to the comparison with the first quarter also, or even when you check it with the last year's Q2.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

Okay. Understood. Last one question, sir, on the shipping cost. Would you be able to quantify what was our shipping cost in the current quarter, and how has it increased compared to the Q2 of last year?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

See, shipping cost has increased significantly over the Q2 of last year. What do you say? It will add more. I will not give you the exact number, but quite significant. We have been able to pass on part of it to my customers. There are ultimately, I will say, overall each cost we have to also bear, and impact on this quarter on the shipping cost is around INR 8 crore-INR 9 crore to the company, net impact.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

That is the part we have not been able to pass, INR 8 crore-INR 9 crore.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yeah.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

All right, sir. Thank you and all the best.

Operator

Thank you. The next question is from the line of Mayank Agarwal from Scientific Investing. Please go ahead.

Mayank Agarwal
Senior Research Analyst, Scientific Investing

Yeah. Hi. Thank you for the opportunity. I hope I am audible.

Naresh Jalan
Managing Director, Ramkrishna Forgings

Yes, you are audible.

Mayank Agarwal
Senior Research Analyst, Scientific Investing

Yeah. First of all, congratulations on the great set of numbers. I have few questions. The first question is regarding the rising commodity prices and the increase of input cost. Like, how do you see this rising input cost has been managed across the supply chain and has been passed on to the OEMs? Is there any time lag changes reflected in the customer pricing and all?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think there are two things. One is inflationary and one is commodity. Commodity pricing every quarter we have been able to pass on in the domestic market. In export market, in contract to contract, it differs, and region to region it differs. Basically, in North America, it is a local American steel market, and I think American steel market has not seen so much of a steel price increase, what Indian steel price increase. In India, the steel price hike has happened. Similarly, in Europe also, we do not see similar hike in terms of the local steel pricing hike. We have been able to get only increases what has happened in the domestic market in North America and in Europe. That is the hit which we have already taken in the balance sheet in the quarter.

Mayank Agarwal
Senior Research Analyst, Scientific Investing

Okay. Basically on the domestic part also, we will be able to pass on the margins, and we will be able to sustain the margins in the coming quarters, right?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Yes. Domestic market, we have been able to pass on the steel price hike, and any further hike also steel price hike, we will be able to pass on.

Mayank Agarwal
Senior Research Analyst, Scientific Investing

Okay. Second question is, generally our H2 is much better than compared to H1, like compared to the previous year. Do we still maintain, like in this year also, the ratio will maintain or it will be same as H1?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I think we are looking at strong year this year, and I think H1 has really gone well for us, and we believe H2 is going to be even better.

Mayank Agarwal
Senior Research Analyst, Scientific Investing

Okay. Thank you so much. Wish you best of luck.

Operator

Thank you. The next question is from the line of Sahil Sanghvi from Monarch Networth Capital. Please go ahead.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Yeah. Thank you for the opportunity. Many congratulations to the complete team for an extremely good set of numbers and performance. My first question is, can you update us on the status of the wheels JV? I mean, which stage are we, and what timelines can we expect for commercial production?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think this month, in the month of November, I think we should be we are already ready with our 300 wheels first batch to be basically, and already we have offered that for inspection to Indian Railways. While we speak also, inspection is continuing, and I think in next couple of weeks, we expect this inspection to get completed, and this first sets of 300 wheels for trials is going to get supplied. Once this is supplied, we are looking at December to go on first phase of production of at least 2,000- 3,000 wheels in month of December. Following in fourth quarter, we should do, we too go to 80% of capacity to make 4,000- 5,000 wheels on immediate basis per month.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Should we be still able to look at roughly, say, 30,000 of wheels for this fiscal year, this whole fiscal year, or should we do over?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Whole fiscal year, we are looking at almost we are looking at around 20,000-25,000 wheels in this year.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Okay. Got it, sir. Got it. Secondly, sir, with respect to, I mean, you've already explained enough on the cost inflation, but some of the commodity prices peaked up in September. Are we expecting further RM cost increase for upcoming quarters? On the shipping side, are we still negotiating for further price hikes from the export customers? Should we expect that?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think we are working with our customers on the wake of tariffs, and I think we are in discussions with them. I think we are not seeing any increase, I think, in the current scenario. It has largely settled down right now at the peak. But in case there is any further increase, we will have to go back to the customer and speak to them. But right now, there is no incremental increase we are seeing in terms of the shipping cost.

We cannot say, I think it all depends on how the geopolitical issues keep in and out. I think it all depends on how the geopolitical issues continue. But in terms of our commodity estimates, we believe that in India, there is going to be another steel hike maybe in January, and I think we are well prepared to pass on the increase to our customers.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Freight also, we will be asking?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Freight, sea freight increase, I think partially, Lalit Khetan has already said in his previous statement, we have been able to partially or substantially pass on that increase to our customer. But yes, obviously, we have in this quarter about INR 8 crore-INR 9 crore hit to the balance sheet in the shipping cost. Going forward also, if the freight continues at this level, we will have to bear some of the cost. Our customer is not prepared to bear the entire cost. Some of the cost we will need to continue to forego and share with the customers.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Got you, sir. Lastly, on the new orders that we have got from North America for castings, possible to share which exact component is this? Is this a new product or existing product? On the customer also, is this an existing customer or a new customer addition?

Naresh Jalan
Managing Director, Ramkrishna Forgings

This is a new customer addition and new product.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Possible to share what product is this?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I think that's not possible, but we can very safely say it's basically LV business, or you can say it is a passenger vehicle business, and it's a new customer and new product line.

Sahil Sanghvi
Equity Research Analyst, Monarch Networth Capital

Got you, sir. Many congratulations again, and thank you, sir.

Operator

Thank you. The next question is from the line of Akshay Shetye, an individual investor. Please go ahead.

Akshay Shetye
Shareholder, Private Investor

Good evening, sir, and congratulations on a strong quarter. My first question is related to railway wheel JV. In July, you expected railway wheel supplies to begin by September, October, with RKFL's remaining equity contribution limited to INR 20 crore-INR 30 crore. However, the commercial production has still not started, and today, the filing proposed a further INR 56 crore investment. What is the status of RDSO approval, and when can we expect the first commercial supplies? Explain the higher funding requirements. Also, once depreciation and interest costs begin on the INR 2,180 crore project, what first-year loss should we expect at the JV level and RKFL's 51% share?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think just now I answered this question of terms of commercial production just before you, the gentleman who was asking the question. We have very clearly clarified that 300 wheels are ready with us, which is under already inspection by the railways. We do not need any RDSO approval for wheels. The inspection is being done by the railways. Once these wheels are approved, in next couple of weeks, we are expecting these 300 to get supplied, and from December onwards to start partial production, and from the next quarter, full production. We are expecting 20,000-25,000 wheels in this fiscal year to be supplied to railways. Lalit, in terms of investment, other thing, can you please?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Oh, see, there is no extra infusion of equity. Whatever the INR 20 crore we have committed is part of the investment, and we are on track of that. Only this INR 56 crore what approval is taken is for the second phase. In the first phase, we are supposed to produce 140,000 wheel, and the second phase, another 114 in terms of machining capability. The entire project cost remains intact, and this is just the approval for the second phase, and the first phase is already completed.

Akshay Shetye
Shareholder, Private Investor

Okay, thank you. I got it. My second question is related to revenue guidance, CapEx, and debt. You guided for INR 8,000 crore revenue by FY 2029 and FY 2027.

Naresh Jalan
Managing Director, Ramkrishna Forgings

Sorry, sir, to interrupt you. We have never guided for INR 8,000 crore revenue from wheel project in FY 2028. That plant is-

Akshay Shetye
Shareholder, Private Investor

2029.

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, no. Wheel project cannot create a revenue of INR 8,000 crore.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

You are talking about RKFL. You are talking about RKFL.

Akshay Shetye
Shareholder, Private Investor

Yes.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Okay. So, FY 2029, INR 8,000 crore of revenue.

Akshay Shetye
Shareholder, Private Investor

FY 2029, yes.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yes, certainly, we are with this kind of growth rate we are having, we are very much there, but we will update you with the times when Let us wait for some time. But certainly, if the kind of.

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think every year, we will basically be able to guide you for the next year. We have this year's guidance for the full year. We have already provided in the earnings call, and we stick to that. I think for the next financial year, and the following year, we will be able to comment on after the full year earnings call.

Akshay Shetye
Shareholder, Private Investor

Oh, okay, fine. Okay, okay. Got it. Thank you. Yeah.

Operator

Thank you. The next question is from the line of Abhishek Kamdar from Value Plus Advisors. Please go ahead.

Abhishek Kamdar
Partner, Value Plus Advisors

Yeah. Hi. Am I audible?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Yes, you are audible.

Abhishek Kamdar
Partner, Value Plus Advisors

Yeah. Congratulations on a great set. I just had one question around ROCE. Last quarter, you had guided for about 12%-15% ROCE in FY 2027 and about 20% by next fiscal year. We have already seen a recovery from last year to H1 of this year. Based on the capital we have already employed, do you still see 12%-15% happening this year?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yes. By the end of FY 2027, we will be in the range of 12%-15% on ROCE.

Abhishek Kamdar
Partner, Value Plus Advisors

Okay. Do you still maintain 20% for next year?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yes, certainly. That is the aspiration that the next year we should have 20% ROCE. I will say that is an aspiration.

Abhishek Kamdar
Partner, Value Plus Advisors

All right. Okay. Thank you and all the best.

Operator

Thank you. The next question is from the line of Chirag Shah from Dalal & Broacha. Please go ahead.

Chirag Shah
Sales Head of Advisory Equities, Dalal & Broacha

Yeah. Hi. Can you hear me?

Operator

Yes, sir.

Chirag Shah
Sales Head of Advisory Equities, Dalal & Broacha

Yeah. Sir, my question is more on. First of all, congratulations on the great set of numbers. My question is on export, sir. Basically, the improvement which we are seeing on exports. My question is that, are we replacing some existing vendors or are we participating in incremental growth? What is the case? If we are replacing an existing vendor, what is leading to that, or how cost-efficient are we?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, we are not replacing any vendor. Only basically new businesses which are coming in, basically our new product launches which are happening in due course, and we are part of those new launches. That is basically the new order wins which we have had, and that's the reason we have guided for eight to nine months of development and testing time before this order gets converted to revenue.

Chirag Shah
Sales Head of Advisory Equities, Dalal & Broacha

Correct, sir. The new product, it might be for us, but it is new product for the client as well?

Naresh Jalan
Managing Director, Ramkrishna Forgings

It is new launches for the client also.

Chirag Shah
Sales Head of Advisory Equities, Dalal & Broacha

New launches, correct. Okay, got it. Okay, and this would be, I would say, new. We are stepping into a new client for the first time, and it also probably opens up their existing orders, which they might be giving to some other vendors, correct? That also opens up the opportunity going forward in the next couple of years?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think, to be very precise, I think the buoyancy in the overall market and the sentiments are extremely good, and I think we are seeing a huge order inflow with new RFQs and new inquiries, I think, flooding our system. We are choosing every single opportunity with precise operations, so what we can do and what we cannot. So I think there is a floodgate of opportunities right now available to all the suppliers who are really wanting to work and grow.

Chirag Shah
Sales Head of Advisory Equities, Dalal & Broacha

Okay. All the best. Thank you. Thank you for taking my question.

Operator

Thank you. The next question is from the line of Vinil Shah from Dalal & Broacha. Please go ahead. Yes, Mr. Vinil, go with the question, please.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Yeah. Thank you for taking up my phone question. So I just wanted to understand how our railway is panning out, because if I look at the Q2 numbers, it has been more or less flat. So do we see the H2 railways contributing higher in the revenue mix?

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

To answer you, I think you are finding things flat because railway is a percentage, and there are orders based on our capacities which we are supporting them. You can always find that every quarter, our total revenue is increasing, so maybe on a percentage-wise, you are finding it flat, but actually, we are trying to push more. But maybe it is not quantifying a very big number in the overall numbers. But yes, the demand, as I already stated, that the demand of railways is high, and we are bagging good orders. So I think our flow is continuous, and there is a continuous growth in the railway segment from our side too.

Vinil Shah
Equity Research Analyst, Dalal & Broacha

Thank you, sir. But actually, I just figured out the absolute numbers. It is coming out to close to INR 64 crore, INR 65 crore for Q1 and Q2 as well, so that is why I had the question. But this clarifies it. Thank you very much.

Operator

Thank you. The next question is from the line of Kush Nahar from Electrum PMS. Please go ahead.

Kush Nahar
Research Analyst, Electrum PMS

Yeah. Thank you for the opportunity. So, I just had one question. So could you elaborate more on this, so the target that you have mentioned earlier, in order to achieve that, there is an implied growth of, say, 23%-24% CAGR. So could you elaborate more on what the growth drivers will be? So will it be more of export versus domestic, and in general, be more of auto, non-auto, et cetera?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I think in terms of auto, passenger vehicle is going to be the next lever of growth. We are looking at almost in next two years, by CY 2028 or FY 2029, basically, we are looking at almost 10%+ growth to come in from passenger vehicles. With the current order book and also the new order wins and the pipeline being so strong, we are extremely confident of our automotive business, specifically on the passenger vehicle side, to grow exponentially for us. I think basically for a CAGR growth of 20, 24%, I think we would like to comment on year-on-year basis. This year looks extremely strong for us, and I think we may surpass our previous peaks in terms of year-on-year growth. I think after the full year, the earnings call, we will be able to guide for the following years.

Kush Nahar
Research Analyst, Electrum PMS

Right, sir. And sir, any update on the defense products that you're working on?

Naresh Jalan
Managing Director, Ramkrishna Forgings

No specific, I think, right now to inform our investor community, but I think we are diligently working on our aerospace business, and I think very soon we will be able to give some news which really means for our investors.

Kush Nahar
Research Analyst, Electrum PMS

All right, sir. Thank you.

Operator

Thank you. The next question is from the line of Venkat, an Individual Investor. Please go ahead. Sir, your voice is not audible properly. Hello? Hello, Mr. Venkat?

Speaker 16

Yeah. Hi, is it any better?

Operator

Yes, sir.

Speaker 16

Yeah, sir. Hi. Congrats for great results. The question I have is more broad-based. With the upcoming FTAs with U.K., Europe, et cetera, could you just throw some color in terms of what sort of opportunities are you foreseeing as we head on to the next year and a half? Have you started receiving customer inquiries from those regions? Are there any new segments that are opening up, et cetera? It will be good if you could give some strategic color on those.

Naresh Jalan
Managing Director, Ramkrishna Forgings

No, I think with the current FTAs of U.K., we are not seeing any major inquiries or anything. I think Europe FTA is still to be approved by the European Union. So, I think we will be able to see any traction going forward, I think, only after the European FTA is approved by the European Union. That is still, there is some time before we see that happening.

Speaker 16

Thank you.

Operator

Thank you. The next question is from the line of Vipul Kumar from Narnolia Financial Services. Please go ahead.

Vipul Kumar
Financial Analyst, Narnolia Financial Services

Yeah. Hi, am I audible?

Operator

Yes, sir.

Vipul Kumar
Financial Analyst, Narnolia Financial Services

Yeah. First of all, congratulations on a great set of numbers, sir. My first question was regarding what is your group level strategy for ahead? What exactly underlying demand is actually helping you to providing the guidance, what you have given for the FY 2027 or so?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I am not able to understand your question, please.

Vipul Kumar
Financial Analyst, Narnolia Financial Services

I am asking what is your group level strategy to achieve the stated guidance you have given for FY 2027?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Group level strategy?

Vipul Kumar
Financial Analyst, Narnolia Financial Services

Yeah.

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think I'm not Lalit, can you answer the question, please?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

I think, sir, what we are thinking in terms of demand, basically, what gives us the confidence to achieve the 20%-25% growth, basically.

Vipul Kumar
Financial Analyst, Narnolia Financial Services

Yeah.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

That basically comes from whatever the RFQs are there in the pipeline and the order handling we have done in the last few quarters, and the inquiries from the customers and the guidance from the customer, all give us this kind of confidence to achieve that growth.

Vipul Kumar
Financial Analyst, Narnolia Financial Services

Okay. Thank you. Can you provide a guidance of EBITDA margin for FY 2027?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

See, already, I think, earlier we have given guidance that there will be an improvement of 30, 40 basis point quarter-on-quarter. That's our intention is to achieve that, and we will keep on looking at it.

Vipul Kumar
Financial Analyst, Narnolia Financial Services

Okay. Thank you. I'll rejoin then.

Operator

Thank you. The next follow-up question is from the line of Pradyumna Choudhary from Bohat Investment Advisors. Please go ahead.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

Yeah. Hi. Just one more question. Usually, from order win to delivery beginning, what would be the time period? I know for different order wins it would be different, but on an average, what sort of a time gap is there?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Average, it is six months, right?

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

Even on the CV side and the PV side?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Anyway, in all the places, on an average, it is six months.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

How would it differ between domestic and exports?

Naresh Jalan
Managing Director, Ramkrishna Forgings

Exports, it is around 9 to 12 months, and in domestic, it is three to four months.

Pradyumna Choudhary
Analyst, Bohat Investment Advisors

All right. Thank you.

Operator

Thank you. The next question is from the line of Tanmoy Roy, an individual investor. Please go ahead.

Tanmoy Roy
Shareholder, Private Investor

Hello. Am I audible?

Operator

Yes, sir.

Tanmoy Roy
Shareholder, Private Investor

Hello. Am I audible? First of all, thank you for the opportunity and congratulations for the good set of numbers. I just have few questions. First one is, like, for the railway wheels, what is the margin profile you are expecting from there?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Can you repeat your question? What you are looking at, railway wheels JV, you are asking for the margin?

Tanmoy Roy
Shareholder, Private Investor

Yeah.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

At the optimum capacity utilization, we can achieve around 18%-20% EBITDA margin.

Tanmoy Roy
Shareholder, Private Investor

Okay. That is better than this casting profile, right?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yes.

Tanmoy Roy
Shareholder, Private Investor

Okay, fine. Thank you. The second one is the second aerospace. Which level of components or anything which you are targeting? Aerospace has many level of suppliers, supplier one, supplier two, and supplier three, and supplier four. Supplier one, the one who actually build the component for the engines. Which segment actually we are targeting, and if you have any idea?

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

For aerospace, let me answer you. It is not that we are going forward with any Tier 1, Tier 2s. We are in discussion directly with OEMs. Currently, the components which we are aiming at is from the aero engine side, but at the same time, frame components are also being explored together.

Tanmoy Roy
Shareholder, Private Investor

Now, why I'm asking is because, aero engine side, what I understood is, like, it takes like four, five years for even for-

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

No, it's not the case.

Tanmoy Roy
Shareholder, Private Investor

Get it to the approval.

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

We are looking forward to the forgings. Basically, forgings, if it is supplied to the OEMs, they basically machine the product, and the metallurgical part, validation, and other things is much faster if the OEM is machining it directly within in-house. We look forward that once, as I already told you, we are working on, and this sector is progressing well. Tomorrow, if we get into the aerospace, the business what we are aiming at, that can always see a much faster as compared to your expectation of four to five years.

Tanmoy Roy
Shareholder, Private Investor

Okay, so when you say like you are directly working with OEM, so these are not precision components like titanium grade ones which we are looking at. It is like only the forging part of it.

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

Highly precision components. These are only highly precision forging components, and forging itself is the most precision item to be done here, because these are engine components.

Tanmoy Roy
Shareholder, Private Investor

Okay. Yeah. Thank you so much. Thank you. That is it from my side.

Operator

Thank you. The next question is from the line of Kush Nahar from Electrum PMS. Please go ahead.

Kush Nahar
Research Analyst, Electrum PMS

Yeah. Thank you for the follow-up opportunity. Sir, I just wanted to understand on the gross margin side, we are seeing that for Q1 and Q2, it has been materially higher than what was our general rate earlier. What would be the reason for the same, and is this the sustainable rate on the gross margin levels?

Naresh Jalan
Managing Director, Ramkrishna Forgings

I think, like what we have said that the market, there is a lot of traction and opportunity. We have been able to choose our products very diligently in terms of our capacity utilization. With the capacity utilization further improving, I think we will be able to sustain and grow on it.

Kush Nahar
Research Analyst, Electrum PMS

Only gross margin side. All right.

Naresh Jalan
Managing Director, Ramkrishna Forgings

Yes.

Kush Nahar
Research Analyst, Electrum PMS

Yeah. Okay.

Operator

Thank you. The next question is from the line of Karan Gupta from CAVI Capital. Please go ahead.

Karan Gupta
Founder and CIO, CAVI Capital

Yes, thank you. Appreciate the opportunity. Just wanted to ask on the cash flow. There has been a decrease, I guess, investment in accounts receivable and inventories, and the addition to cash flow seems to have come from the accounts payable. Could you just comment on that and what the position is as of date and what you expect for the rest of the year?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

If you look at the cash flow, there is a net increase in inventory and debtors in terms of value, and that is net off by the creditors. There is a net increase of about INR 140 crore in terms of working capital, net working capital. But, if you look at the in days, number of days, we are almost there what we are having in the March. It is all account due to the volume growth, what we are getting, the increase in the working capital number, not the days, it is the value.

Karan Gupta
Founder and CIO, CAVI Capital

Okay. Going forward, do you expect these working capital days to remain at these levels?

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

We will say we will improve it. We are working on improving these numbers, and you will see some improvement in working capital levels in upcoming period.

Karan Gupta
Founder and CIO, CAVI Capital

Okay. Just in terms of days, even though debtors and inventory might seem similar, the payable days seem to have increased since they are offsetting the other two.

Lalit Khetan
Whole-Time Director and CFO, Ramkrishna Forgings

Yeah. Yeah, but that's a mix of ultimately, see, inventory and debtors are interrelated because see, lot of shipment we have done has not been converted into the debtors and has been built in inventory. Okay? So you have to see both together, and because the shipping delays are causing that kind of situation. So if you look at together, that is much more than the increase in creditors.

Karan Gupta
Founder and CIO, CAVI Capital

All right. Thank you and all the best.

Operator

Thank you. Ladies and gentlemen, we will take that as a last question. I would now hand the conference over to the management for closing comments. Over to you, sir.

Milesh Gandhi
Whole-Time Director, Ramkrishna Forgings

Thank you. I would like to thank all of you for taking time and joining our conference call and earnings call. We hope we have answered all your queries to your satisfaction. Would you like further information? Would you like us to get in touch with us or say we are? If you have any further information to be required from us, we look forward to interacting with you in the next quarter. Thank you very much for joining us as well. Thank you very much.

Operator

Thank you. Thank you so much. On behalf of Ramkrishna Forgings, that concludes this conference. Thank you for joining us, and you may now disconnect your lines. Thank you.