Ladies and gentlemen, good day and welcome to ZF Commercial Vehicle Control Systems India Limited Q2 FY 2026 Post-Result Earnings Conference Call. As a reminder, all participant lines will be in the listen-only mode, and there will be an opportunity for you to ask questions. After the presentation concludes, should you need assistance during the conference call, please signal an operator by pressing Star, then Zero on your touch-tone phone. Please note that this conference is being recorded. I now hand the conference over to Mr. Jayaraj. Thank you, and over to you, sir. Sorry, sir. Just a moment, I'm unmuting you. You can start now, Mr. Jayaraj.
Yeah. Thanks. Good afternoon. Thank you for joining us today. I welcome you all for the ZF Commercial Vehicle Control Systems India Limited Earnings Call to brief on the Q2 FY 2025 2026 quarterly earnings, which will be presented by the management team of ZF Commercial Vehicle Control Systems India Limited. Our hosts today from ZF Commercial Vehicle Control Systems India Limited are Mr. Paramjit Singh Chadha, Managing Director; Ms. Shweta Agarwal, CFO; Mr. Shankar Venkatachalam, Head of Sales, OE Sales, and Ms. M. Muthulakshmi, Company Secretary. I now hand over the call to Mr. Paramjit Singh Chadha, who will provide further insights into the results. Over to you, sir.
Thank you, Jayaraj. Good afternoon to all. I warmly welcome all of you to ZF Commercial Vehicle Control Systems India Limited's second quarter results call, called for the year 2025, 2026. Here, certain forward-looking statements that we will make today are based on the management's good faith and expectation concerning future developments. The actual results may differ materially from these expectations because of multiple ongoing factors. ZF Commercial Vehicle Control Systems India Limited's results for the quarter ending September 30, 2025 were published on November 4, 2025. They are available on the website, www.zf.com, under the ZF CV India Investor Relations section. We hope that you have had an opportunity to go through them. A transcript of and recorded audio of this call will also be made available on the website, www.zf.com, under the ZF CV India Investor Relations section.
Sorry to interrupt, sir, but there is a slight disturbance in the management's line. I will reconnect you. Just a moment, sir.
Okay. Yeah. Continuing from.
Now you are in the conference.
Yeah. Continuing from where we left, I am happy to talk to you today as we give you an update about the business of the company, including the market and the economy. Industry and economy updates. Let me begin by highlighting a few key macroeconomic aspects relevant to our industry. The global environment continues to remain volatile. Global GDP growth is projected to slow down from 3.3% in 2024 to 3.2% in 2025 and expected at 3.1% in 2026. This is based on the various indicators from World Economy Outlook and Global Economy Influx Related Portals. However, India's real gross domestic product GDP, driven by strong private consumption and fixed investment, recorded a robust growth of 7.8% in Q1 2025-2026. Moving forward, we have brightened prospects of agriculture, resilience in the service sector, rising capacity utilization.
Conducive financial conditions, and improving domestic demand should continue to facilitate fixed investment. Globally, while ongoing tariff and trade policy uncertainties may decrease external demand for goods and services, the implementation of growth-inducing structural reforms within India, such as streamlining of GST, is expected to offset some of the adverse effects of the external headwinds. Taking all these factors into account, the real GDP growth for 2025-2026 is now projected at 6.8%, with Q2 at 7%, Q3 at 6.4%, and Q4 at 6.2%, based on the sources from the Reserve Bank of India. India. Commercial Vehicle Industry. Let us talk about the commercial vehicle industry as we are presented above 6.6 ton segment in commercial vehicles. We will go through the prospects and the current situation. The production of CV more than 6 tons has grown by 7.6% over last year.
Despite this positive trend in production, the overall CV mix was impacted by a 3.3% decline in the heavy-duty segment, where our products are predominantly used. This decline was attributed to improved fleet utilization rates, better highway infrastructure, reducing the need for additional vehicles. Looking at the truck segment in the CV industry, in the truck segment, we anticipate several factors that will be conducive to the growth. One is reduced EMI burden following the GST reforms announced in September 2025. This may spur fleet owners to increasingly opt for new vehicles with upgraded features instead of buying a used truck because of the decrease in the EMI owing to the reduction in the vehicle price. Increased capital expenditure by the government, along with strong momentum in the infrastructure and construction sector, is expected to fuel the demand. The resumption of mining operations post-monsoon will further contribute to segment growth.
Looking at the bus segment, while India's overall bus segment, medium and heavy, has grown by 11%. The e-bus market demonstrated a large 37% growth in H1 of 2025-2026 compared to last year. This acceleration is primarily driven by state transport electrification supported by central schemes like PM E-Bus SEVA. Looking at the trailer segment, trailer production registered a degrowth of 3.5% in Q2 2025-2026 as compared to Q2 2024-2025 due to extended monsoon disruption in logistics and construction. The postponement of buying decision following the uncertainty surrounding GST reforms significantly subdued demand in July and August, resulting in overall reduction in trailer production for Q2 2025-2026. This will improve going forward. This is what we are estimating. LCV segment, which is another segment where the company has started working. Not in a big way, but we are.
Recognizing that we have a strategy focus to be adopted on commercial vehicles less than 6 tons. This segment, which has grown by 8% in H1 2025-2026, is expected to gain further momentum in the upcoming quarters. This growth will be driven directly by GST reduction and indirectly by rising consumption demand, both contributing to sustained expansion in the LCV category. OE Sales. How this market and economy condition has impacted on OE Sales. In line with the vehicle production. Which we are discussing, commercial vehicles more than 6 tons, growth of 7.6%. Our overall OE Sales grew by a similar number, around 7.4%, in Q2 2025-2026. As compared to the similar quarter in the previous financial year. This growth comes despite facing headwinds such as an unfavorable model mix and degrowth in the trailer market. The growth was primarily driven by higher ESC penetration supported by.
Updated regulation effective September this year, which accelerated the adoption of ESC. Market share gains in e-compressors, particularly among independent bus manufacturers. Looking forward, the outlook for the commercial vehicle industry remains positive, with multiple indicators signaling a sustained rebound. In preparation for this upswing, we are executing strategic initiatives aimed at strengthening our competitiveness and delivering long-term value. For example, we aim to increase penetration of trailer ABS, trailer EBS, and Scholar EVO Plus systems in line with the AIS 113 trailer regulations and growing demand for safety and operational efficiency in trailer fleets. With updated ESC regulations for buses effective September, we are focused on localization efforts to enhance these and sustain the market share across all customer segments. Also, key initiatives include ramping up projects such as exhaust brake valves, expanding penetration of OptiDrive AMT, and introducing OptiRide electronically controlled air suspension e-cars.
We are also looking at working with independent bus manufacturers with a strong focus on e-compressor and EVS systems to capture growth in the electric vehicle segment. Beyond the anticipated near-term rebound, we see strong long-term growth drivers emerging from evolving regulations and the rapid adoption of electric mobility. The accelerating production of electric buses represents a significant opportunity. Our advanced e-mobility portfolio, comprising of e-compressors, electronic braking system (EBS), electronic stability control (ESC), and electronically controlled air suspension e-cars, positions us as a key technology partner and enabler in this space. These developments reinforce our long-term growth trajectory and underscore our strategic alignment with the future commercial mobility. Looking at our aftermarket strategies and performance, our aftermarket has registered an impressive growth of 12.6% in Q2 2025-2026 compared to Q2 2024-2025.
Primarily, this is driven by increased retrofitment of trailer ABS, ES parts for petroleum oil companies, and an increase in the supply of door control systems. This was also supported by increased penetration of products like clutch boosters, and contribution of. OES growth was significant due to replacement demand in BS4 and BS6 models, contributing to our volumes. Looking at exports. In exports, we have two categories. One is export of parts, products, and export of services. Looking at export of parts and products, our export performance in Q2 2025-2026 registered a 16% decline compared to the same period last year. Primarily due to volume reduction in the U.S. market, some due to tariff. Costs passing through. By OEMs to the end customers. This volume reduction was not completely offset by the volume increase in Europe (EMEA).
While these factors created short-term headwinds, we remain committed to navigating this environment with resilience and agility. Despite temporary reduction in volume for air compressors driven by softer EV sales globally, the company has proactively executed strategic initiatives to reinforce growth and realign priorities. Key actions include successful start of production for Actuator 4.0 and air compressors for other global OEMs. Alongside measures to diversify and strengthen our portfolio, portfolios are also on cards. Export of services grew by a robust 12.1% in Q2 2025-2026 compared to the corresponding quarter last year. The growth was driven by a sustained increase in engineering activities delivered from India to global centers, reinforcing India's position as a strategic hub for engineering services within ZF globally. We will also discuss our efforts and work done on the ESG sphere. Sustainability remains a core strategic priority for the company in Q2 2025-2026.
Our Jamshedpur plant advanced its water-portable approach by implementing rainwater harvesting infrastructure with a capacity of 1,300 m cubed, enabling reuse for domestic purposes and contributing to a 25% reduction in the freshwater consumption. Additionally, we celebrated CVS Sustainability Week 2025 across all facilities, reaffirming our commitment to environmental stewardship under the themes, "Think the impact, think long-term, and act sustainably." Employees actively engaged in pledges and toolbox talks focused on energy efficiency, waste reduction, and water conservation. These initiatives continue to foster a culture of awareness, innovation, and collective action, driving progress towards our long-term sustainability goals. Updates on engineering. Our engineering front. The company had successfully started the series production for 60-tier exhaust brake valves for major OEM platforms. Our team contributes to focus on technologies such as ADAS and software-defined vehicles. Updates on the manufacturing.
We continue to accelerate the production of advanced technology products, our new multi-regional facility in Oragadam. A key milestone this quarter was the successful rollout of the brake signal transmitter for e-mobility application, now serving leading Indian OEMs. Our portfolio has further expanded with relay valves, high-force actuators, and localized ASP cartridges, addressing both OEM and aftermarket demand in the truck and trailer segments. To support this growth, we are scaling manufacturing capacities across various plants. Assembly lines at Lucknow and Pantnagar have been upgraded to enhance delivery performance, flexibility, and responsiveness, while contributing to the sustainability goals by reducing transport-related emissions. Productivity and quality have also seen significant gains through smart automation, robotics, and digitalization of assembly and machining cells. Looking at awards and recognition, I'm pleased to share that.
In Q2 2025-26, our ZF teams earned significant recognition across leading industry forums, securing three national-level awards, four regional awards, and 12 state-level awards. Our teams achieved top honors in prestigious competitions such as CII TPM Mastermind Quiz and CII Six Sigma Competition, along with accolades from CII ECMA, QCFI, and ABK AOTS. These achievements underscore our unwavering commitment to operational excellence, innovation, and continuous improvement, reinforcing ZF's leadership position in the industry. New executive management team at ZF present. We want to announce these changes in the global management. ZF Supervisory Board has appointed Mr. Mathias Miedrich as the new Chairman of the Board of Management of ZF, with effect from 1 October 2025, in place of Dr. Holger Klein, who had left on close of the business hours of September 30, 2025. Mr.
Miedrich has been a member of the Board of Management since January 2025 and was heading the Electric Flight Powertrain Technology Division. The other change is Mr. Andrea Smaller has taken over the responsibility of ZF Commercial Vehicle Solutions Division, along with his responsibility as Head of ZF Industrial Technology Division, with effect from November 1, 2025, in place of Professor Dr. Peter Layer. Now moving on to our financial performance for Q2 2025-2026. For your ready reference, the results were made public at 15:42 hours IST on 4 November 2025. I hope you had a chance to go through them. I would request Shweta to go through the results in brief.
Good afternoon. The total revenues consolidated for the quarter ending 30 September 2025 reached INR 958.21 crores compared to INR 950.18 crores in the same quarter of the previous financial year.
This is a marginal increase of 0.8% year on year. For half year 2025-2026, the company's consolidated net profit reached INR 230.65 crores, up 10.6% from INR 208.55 crores in the corresponding period of FY 2025. Total revenue for the first half grew to INR 2,003.6 crores, from INR 1,921.2 crores, representing a year-on-year increase of 4.1%. The company has reported an EBITDA margin of 22.9%, profit before tax of 18.6% of product sales at INR 145.9 crores, and profit after tax of INR 108.3 crores for the second quarter 2025-2026. Despite multiple headwinds, we remain resilient in a volatile macroeconomic environment and poised to support the demand from our valued customers. We continue to support and work towards sustained growth for all our stakeholders, investors, business partners, and employees.
Thank you. We now welcome your questions.
Thank you very much. We will now begin the question and answer session.
Anyone who wishes to ask a question may press star and one on their touchstone telephone. If you wish to remove yourself from the question queue, you may press star and two. Participants are requested to use handsets while asking a question. Ladies and gentlemen, we will wait for a moment while the question queue assembles. The first question is from the line of Lakshmi Narayanan from Tunga Investments. Please go ahead.
Yeah, thank you. I just want to understand what has been the acceptance or penetration of electronic stability control in buses, and what is the mix of hydraulic and pneumatic kits we have actually been supplying?
On the electronic stability control, from the first of September, the majority of the buses which are on the roads, other than the exempted Type 1 city buses, have been fitted with electronic stability control.
We are in series supplies to most of the major OEMs. In that area, we are seeing an uptick in the numbers that are being produced and sold to the OEMs, to the tune of around 40%-45% over the previous year, same time. On the hydraulic portfolio, we see a marginal increase in some of the segments where the hydraulic ESC is being used. Still, the legislation for the school buses, even though it is under draft, has not been enforced. Once that legislation is enforced, we are expecting that there will also be a significant increase in the hydraulic ESC. At this moment, there is a marginal increase in certain segments where they are using the hydraulic ESC in the non-school bus application.
I mean, approximately what, 40,000 buses are made in India every year.
Do you think this would be fitted in how many buses? This is becoming banded to what % of buses it would be?
We would say about 60% of the buses, because the balance are covered under city bus application.
Okay. The second question is in terms of the AD, I mean, advanced driver assist systems and the advanced emergency braking system, where does the regulation stand now, and what has been our progress in the existing OEM?
At this moment, the draft legislation is only what we have in the public domain. There are talks going on between the government bodies and the OEMs on a date of legislation when it is expected to be launched. Looking at current estimates, April 2026 seems to be very close. There is a delay anticipated.
The exact dates may be public in a couple of months. We are yet to get the exact fix on when that is expected to come about. Thank you. Where we are today, we are in continuous engagement with each of the OEMs to see how we are able to work with them on this product.
Do you think this would actually be applicable in anything which is above 6 ton, or is there a tonnage-based gradation for ADAS and ABES?
ADAS and ABES, currently, the draft legislation talks about a mandate in M2 and M3. That is everything that is greater than 5 ton, buses and trucks.
Got it, got it. What would the electronic braking systems, what has been our progress there, and when do you think this would actually come? This would come after the.
ADAS and ABES comes in, or how do you think about this?
Electronic braking system is more in practice for the electric vehicles, less so for the ICE platforms. On the electric vehicles, the additional advantage that the EBS provides is regent capability, in addition to improved braking feel, almost fast car-like feel. Due to these two key buying factors, it is more penetration in the electric vehicle platform. As the e-bus segment grows and increased comfort levels start growing, we see an increased penetration happening in the EBS.
Got it, got it. Last question related to the disc brake system. Can you just help us understand. Where we are in terms of disc brakes?
On the disc brakes, there are a few segments and sectors which are adopting disc brakes.
In certain cases, EBS and disc brakes are going in tandem, where you have improved braking feel as well as improved braking efficiency. However, the definite increase is not seen to that level because the cost of a drum brake is still cheaper than a disc brake today in the market. In cost-sensitive segments, you do not find that level of adoption. The typical use case applications are the 13.5 m, 15 m buses, which are usually the sleeper buses. In those segments, you find the adoption of disc brakes more prevalent.
Got it, got it. Thank you, sir. I'll come back into it.
Thank you. The next question is from the line of Ajox Fredrick from Sundaram Mutual Funds. Please go ahead.
Hi, sir. Thanks for the opportunity. My question is on exports. You mentioned in your comments that the next steps we will be working.
With air compressor actuators for balancing out the weakness. Those are in work in our Oragadam plant already. Can you give some color on what's happening in the Oragadam plant and eventually what are the products we are working on and some outlook on the exports?
On the export side, the products that we referred to are currently being planned out of our Mahindra Valsity, the FEZ plant. These products are with current businesses which we are already having with our key OEM customers, partners in Europe and US. Some of the products that are identified are clutch compressors and OPR-based compressors, which are mostly looked at for growing the business and improved profitability for the group.
Actuator and advanced actuators for other global OEMs are again, most of the current upgraded actuators from the double diaphragm disc brake actuators and spring brake actuators which are being produced out of our Mahindra Valsity plant will be upgraded to smart actuators as the next generation actuators which are being planned for European market.
Okay, okay. That is wonderful, sir. Secondly, on the LCV, I know it is too soon. Where are we on that opportunity? Are we in the development stage or what are we doing there?
On the overall ILCV segment, if you look at it, we are already present in hydraulic ESC, as I just mentioned previously. The segment where we are already present in hydraulic ESC, we are trying to grow our market share and also the penetration.
Apart from that, in the LCV portfolio, we are looking at a few other products that are on the braking system platforms, where we are already having a few products in our current range, as well as some other products that we are looking in the near term.
Got it, sir. That's helpful. Just a final data-keeping question on U.S. exports, sir. How much was this time around versus, let's say, last quarter or last year?
So the U.S. volume reduction was around 20%. And it was somewhat offset by EMEA volume increase, but not fully offset. Okay. That's helpful, man. That's it for me. Thanks.
Thank you very much.
Thank you. The next question is from the line of Mumoksh Mandlesha from Anand Rathi Institutional Equities. Please go ahead.
Yeah, thank you, sir, for the opportunity.
Firstly, sir, if you can help us understand, in this quarter, we've seen a gross margin improvement Q1Q by around 160 basis points. What led the improvement? Also, in H2, in the cash flow, we can see almost INR 187 crore working capital improvement in first half. Can you just explain what led to the improvement?
Okay. Answering your question first on the basis points improvement, we've worked actively on our material costing and efficiency, production efficiency in the plant. That has given us the improvement both on the material-to-sales ratio as well as on the direct labor costs. That's what you're seeing in the bottom line expansion. On the cash flow side, we have worked very actively on our working capital management and reduced our details. We've worked actively on collections of details, and as well as, of course.
Better utilization of our idle cash. Investing it more, I would say, in a sustained way rather than leaving it completely passive.
Thank you, ma'am. Yeah, thank you, ma'am, for the answer. This is on the, when we said this for you, for on the compressor e-buses segment, I just want to understand what kind of a market share currently we have for the compressor for the EV buses, and how do you see the growth for the segments?
Yeah, in EV buses, if you ask for the compressors, I think from the India OEM suppliers, we are the only supplier for the compressor. There are some little imports some companies are doing, but predominantly it is our compressor only.
Got it, sir. And sir, on the H2, sir, second half, particularly for the U.S. market, how do you see the run rate for the sales, sir?
Just, I mean, overall basis, over a medium term, how do you plan to tackle this challenge of tariffs, sir?
Yeah, we shared last time also. As we indicated, our products are basically safety-critical products, any new source introduction will take time for the OEM to switch over. We see that it will not be an immediate impact. The current draw, which we explain, is more because of the overall market, which is down in the U.S., not only considering tariff, but otherwise also. A good point here is that we have seen Europe volume increasing. If you see, around 9% improvement is there in our sales for Europe as compared to a drop of more than 20% in the U.S. Some compensation is already happening. We are looking at more customers in Europe also and.
Trying to see that somehow we balance this through addition of customers and also looking at product portfolio.
Got it, sir. Thank you so much for the answer.
Thank you. A reminder to all the participants that you may press star and one to ask a question. The next question is from the line of Mukesh Tharap from Avendus Park. Please go ahead.
Good afternoon, sir, and thank you for the opportunity. First question is on exports. When I look at your FY 2025 annual report, the related party transactions, which kind of cover majority of your exports to the group entity. The U.S., as such, seems very small in that. Is it that we are indirectly supplying to U.S. via entities in other geographies? Because this year, first half, it seemed to suggest that U.S. weakness has impacted the entire exports. Just trying to understand that.
Mukesh, our arrangement for the sales to the group is that we bill out to our European entity, and then they in turn invoice it to other countries. That's why it looks like we are not supplying to America. If you look at our split on an actual, it would be about 50% America and 50% Europe for FY 2025.
Understood. Understood. That clarifies, ma'am. Thank you. Second question is on the regulation. While the draft regulation mentioned about October 2026, and I think we are expecting a delay there, just trying to understand the delays. Primarily because the OEMs are concerned with the cost, or is it some other operational homologation or technological issues? I'm just trying to understand what's the thought process there from the other stakeholders.
I think the answer to this is.
Exactly not with us, but it depends upon the OEM strategy on this. Definitely, cost is one factor. But just to update you that we have a special solution for India market, which is not as costly as what we are providing abroad.
Okay. Okay. Okay. Right. Right. Understood. Just the last bit, you had mentioned about your strong portfolio on the buses segment. Any sense you can give us on your overall kit value for a bus versus a kit value for a truck? Because I think last quarter you had mentioned overall, generally, your kit value is around INR 45,000 for CVs. I just want to understand how this differs between a bus and a truck.
Typically, in an electric bus, we are talking about electric buses here, right? Normal ICE buses versus electric buses, the major jump is in the e-compressor.
That is the major cost driver when it comes to an electric bus, apart from the battery and other products that are there. Our contribution in an electric bus almost jumps about five-fold because of the e-compressor addition.
E-compressor.
Yeah. Apart from the e-compressor, you already have the standard braking system, which is also, in certain cases, ABS-based or in certain other cases, EBS-based. EBS-based typically will be around two- to three-fold of the existing ABS plus ESC-based solution. This would be the impact at a vehicle level. Right. An ICE bus and a regular ICE truck, it would not be too different. It would not be very different, except only product mix range-wise. If you have a multi-action vehicle, maybe more axles, more actuators. Yeah. Yeah.
Okay. Okay. Great. Thank you for this. I'll get back in with you. Yes. Thank you.
Thank you. A reminder to all the participants that you may press star and one to ask a question. The next question is from the line of Lakshmi Narayanan from Tunga Investments. Please go ahead.
Yeah. Thank you. First, two questions regarding what's happening globally. It's clear that if there is an increased tariff, it would actually make our products or our sourcing location from Chennai at a big disadvantage. Now, I mean, is there a possibility that maybe the reallocation of whatever is being procured from Chennai or the long plan for Chennai gets derailed if this tariff remains at 50% or something like that? The second question is that there has been a lot of reorganization as well as the financial position of the parent is a little precarious as I see because your bonds are also being downgraded to a junk status.
I just want to understand, if I just put this together, how the parent is thinking about exports and all the challenges which ZF parent is having, what does that actually mean to us?
Crystal gazing based on the tariff would be very difficult, Lakshmi Narayanan. It would, I mean, we can only talk about our preparedness rather than about how the situation will develop. What we have observed over the first half of the year is more around the production volume itself being low in the U.S. rather than any discussion around sourcing changes. That is not the driver of the discussion. It is more about what do we do for the spur in the economy itself of the U.S. Like I said, crystal gazing and probably not our limit to really talk in details about that. We are prepared either way.
By buck flexing as well as being prepared to supply whatever volumes are required by them. That's what I'm saying.
Just on that, because I think the DAF compressors/BMW car compressors, etc., were actually being sourced from India, and there has also been some reallocation of certain factory production to India. Now, what percentage of our production or where we are actually the single source for the entire ZF chain, which would make it comfortable for us to export, irrespective of the tariff situation?
I'm not sure what you're talking about.
No, no. The question is that since we are for compressors, which we are exporting, we are single source. That is clear. That's why I said that to develop a new source, it takes time. We are like everyone is waiting for this tariff issue to resolve. We have time to react.
Also, as we explained, we are compensating the sales by the market improvement we've seen in Europe, which we have seen in the last quarter as well.
Got it. Got it. Regarding the parent situation, because there have been some talks of restructuring, at least some part is already restructured, what does actually that mean for the India entity?
I would say that the new organization, the new changes are also having as high focus as the previous management was. We don't see any focus on India. India is always on radar, as India is doing well, and India market is also doing well. This will be always on the forefront.
Sir, what has been our outperformance of our OE products with respect to the sales above 6 tons?
Because that is one number which you always track, how we outperform versus our target market. Can you just give that number for the first half? What has been the above 6 ton production? And then how our sales are actually benchmarked to that from just the OE products point of view?
When we speak about market outperformance, it is always in comparison to the previous years. In that aspect, if you look at it, we are almost flat this current year. The main reason being the VP vehicle production, while it has grown, it has adversely shifted in terms of the model mix. As was already shared by Mr. Paramjit a little while earlier, there is a significant reduction in the heavy vehicle demand and the production, and this has adversely affected the model mix.
What we have been able to do is mitigate the impact of this adverse model mix with certain new product growth and certain other share of market improvement ideas. This is the way that we have been able to maintain our leadership position in the market.
Got it. Got it. Sir, when it comes to ESC or ADAS or ABS, what kind of competitive positioning do we have? Will our presence be more than 70%-80% plus, or are we almost virtually 100% in those two markets, ESC, ADAS, and ABS, from a domestic capability point of view? Y
Yeah. On ABS and ESC, we are already in the market. The data is there for itself. We are one of the majority market players. On ADAS right now, it is at the early stages of discussion.
As was already discussed a little while ago, we are engaged with all the OEMs. We are looking to see how we can partner with them to launch this product in the field towards meeting these regulatory requirements. Here again, we are expecting to be one of the majority partners for each of the OEMs. That is still a work in progress.
Sir, one last question related to AMT. What % of our business is AMT, as well as what has been the growth of AMT in the last six months versus the previous six months?
% of AMT, what is your—
sorry to interrupt, sir, but there is disturbance in your line management.
Is it better now?
No, sir. Shall I reconnect you, sir?
Okay.
Just a moment, sir. Sir, you can continue now.
Yes. Are we audible?
Yes, sir. You're audible now. Yeah.
Answering the question on AMT, I think today the market itself is at a very low level of penetration. If you see in the last six months, probably we are seeing an improved number in the mining segment, specifically in mining segment, where we see some of the OEMs launching higher speed, higher torque engines in these segments, which are largely AMT-driven. AMT is proving to be a comfort factor as well as an improvement in the turnaround time. These are the key focus areas which are driving the AMT growth in these segments.
What kind of growth have we seen in the AMT? Maybe just to get a sense of it with respect to last year as a base.
If you look at numbers perspective, it is still in the hundreds segment only. We have not seen the numbers grow beyond very high.
Maybe the last year to this year, probably we are seeing the volumes double, but still not crossed the hundreds.
Base is very low. In terms of %, it will not be correct to say. It is still in hundreds, sir.
Correct.
Got it. I mean, hundreds as in hundred units per month?
Couple hundreds. Couple hundred per month. Yeah. Couple hundred per month, yes.
Why is it not picking up? I would thought that , at least four, five years back, we thought that would actually pick up in a big way. What is impeding this? Is it acceptability, product acceptability, or viability?
There are multiple reasons on this particular topic because as the contribution of the pricing of the product and the price level at the OEM, vis-à-vis what comfort and savings or features that it offers to the driver would be the key focus. That is why certain segments like mining, for example, is where it is picking up because there you have the higher powered engines with the higher torque transmissions. There you have high-speed engines and high-speed transmissions. The shifting and focus will be more. There you want a higher turnaround time with minimal driver intervention. Those segments are adopting it faster. You also see this partially in some of the bus segments where you want the city drivers to have the comfort. There again, adoption is driven by FCU tenders. Cost becomes a key factor.
Due to these various factors, penetration has remained low, but there is a promise that this could grow further because there is also a shortage of drivers in the near to long term, and there is also a focus of gender diversity in driving. When you look at women drivers as well as shortage of drivers in the near term, driver's capability will become a big focus rather than focusing on what would be the cost.
Got it. Got it. Got it. Just one last thing, sir. Do we actually have some kind of a driver sensitization program or something where we actually introduce drivers to these products so that they can be a kind of an ambassador for us? Or do we actually let the OEs actually do the work there?
We do extensive communication and training through our.
After-sales network, where we have interaction and connection with driver training associations as well as driver training institutes to talk to them about our technology. The state transport unit undertakings are also jointly working with us on how we can help them in using technology to improve their driver efficiency, to improve their fuel efficiency focus, and so on and so forth. There are multiple initiatives that are spearheaded through the aftermarket and sales network where we work on extensive communication as well as training.
Got it. Thank you.
Thank you. Thank you. As there are no further questions, I would now like to hand over the conference to the management for the closing comments.
Thank you very much. Some nice questions, good questions, good interactions. Thanks for participation, and thanks for your support. Thank you.
On behalf of BNK Securities India Private Limited, that concludes this conference. Thank you for joining us, and you may now disconnect your lines. Thank you. Thank you. Thank you.