Ladies and gentlemen, welcome to the Oerlikon Q3 2023 Results Conference Call and live webcast. I'm Sasha, the call operator. I would like to remind you that all participants will be in listen-only mode, and the conference is being recorded. The presentation will be followed by a Q&A session. You can register for questions at any time by pressing star and one on your telephone. For operator assistance, please press star and zero. The conference must not be recorded for publication or broadcast. At this time, it is my pleasure to hand over to Stephan Gick , Head of Investor Relations. Please go ahead.
Good morning, ladies and gentlemen, and welcome to Oerlikon's Q3 results call. With me in the call, I have Philipp Müller, CFO of Oerlikon. Philipp will start the call with a presentation, providing an update on our end markets, financials, and guidance. We will then follow up with Q&A. With that, I would like to open our presentation and hand over to Philipp. The floor is yours.
Thank you, Stefan. Good morning, everyone, and welcome to our Q3 results presentation. In Q3, we continued to execute our strategic objectives and successfully drove forward technical innovation and the integration of Riri. We are doing this in a difficult economic environment, as industrial production and consumer spending continue to be subdued and currency headwinds persist. I will start the presentation with an overview of the group results, followed by an update on our end markets, the divisional results, and I'll conclude with our outlook. At the group level, orders were CHF 567 million. Polymer Processing Solutions customers continued to delay their investment decisions. In Surface Solutions, orders were up 3% organically. Group sales decreased 11% at constant FX to CHF 623 million. This includes a 5% contribution from our acquisition of Riri.
In Surface Solutions, we achieved a slight FX-adjusted organic sales increase in Q3 and a solid 7% growth in the first nine months of the year. This was more than offset by the declines in Polymer Processing Solutions. Operational EBITDA was CHF 98 million, an EBITDA margin of 15.7%. Profitability was impacted by negative operating leverage, the strength in Swiss franc, and higher input costs. We're executing a clear set of cost and pricing actions, which will support our profitability in the coming quarters. We have seen first benefits in Surface Solutions, where margins improved sequentially. With that, let me provide you an update on our end markets. Polymer Processing Solutions, customers continue to delay their investment decisions, which is reflected in our order intake. On the filament side, 2023 is the fourth challenging year in a row for our customers.
Chinese customers are exposed to higher stockpiles in the textile industry this year, and selective consumer spending as the increased cost of living has put pressure on discretionary spending budgets. This follows the past years, which were impacted by higher input costs, logistics challenges, tighter financing, and COVID-related lockdown in China. As a result, we see Chinese filament customers holding back their expansion and replacement plans. They started postponing CapEx decisions and preserving cash in the second half of last year. To date, we have not yet seen a meaningful recovery, but we do note increasing governmental stimulus for the machinery industry. We continue to expect an order recovery to happen in 2024. A first positive indication is that price cost spreads of our customers improved this year.
This means our customers have a positive cash margin on every ton of product they sell, which is a precondition for them to invest into our equipment. I will elaborate further on this topic later on in the presentation. In our non-filament business, where our end markets and geographies are broadly diversified, we saw impacts from globally weakening PMIs. The nonwoven and carpet yarns businesses are seeing some customers delay their investment decisions. Typically, orders are smaller, with low financing needs, and return faster when consumer demand picks back up. In flow control, where performance is closely related to car model launches, we saw impacts from a transitory reduction in car launches in the quarter. We expect car launches to accelerate again in 2024. In the Surface Solutions division, we are operating across the tooling, automotive, luxury, aviation, and general industries, end markets.
Particularly, the general and tooling industries have a close correlation to industrial production. Manufacturing PMIs in Europe and the U.S. entered contraction zone in the second half of last year and have not recovered since. Also, in China, we see subdued momentum, despite the opening in the beginning of the year. Weak industrial activity had therefore an impact on our general industries and tooling sales in Q3. In automotive, we hear mixed signals from our customers, particularly in the premium segment. After a relatively slow start to the year, we have seen a catch-up in automotive in Q3. This is supported by light vehicle production growth, which industry forecasts expect to be mid-single-digit this year. We continue to drive innovation, and Oerlikon has made significant commercial progress with e-mobility solutions this year, particularly in battery shielding.
In luxury, the integration of Riri is on track, and we achieved solid sales during Q3. We are currently seeing a slow, slowing momentum in the Q4 related to China and destocking. This is underscored by some leading indicators like Swiss watch exports, while other indicators, such as tax-free shopping, remain strong. Mid-term growth drivers for luxury remain well intact. Finally, in aviation, we see continued growth as rising flying hours are driving MRO activity. The China reopening and return to long-haul travel are a key factor as the industry returns towards 2019 levels. Oerlikon solutions will support more efficient and more sustainable aircraft engine technology. Summing up, the difficult market environment for Polymer Processing Solutions will impact 2023 and 2024 sales. We have taken proactive measures to preserve profitability and emerge even stronger. In Surface Solutions, we see continuous weak industrial momentum.
We are confident that our value proposition of improving efficiency and sustainability is in demand, particularly in difficult times. Innovation and joint R&D with our customers will drive midterm growth. With that, let's move to page 4, where we discuss the financials for our Surface Solutions division. Orders improved 3% organically to CHF 367 million, despite the softening industrial activity. The book-to-bill ratio was at 1.0 as per the end of the quarter. In terms of sales, we achieved 1% organic growth in the quarter and 7% in the first 9 months of the year. Growth was supported by the automotive, energy, luxury, and aviation end markets. Operational EBITDA in the quarter improved 6% to CHF 63 million. EBITDA margin was roughly stable year-over-year at 17.1%.
The business continued to be impacted by the strength in Swiss franc, higher input costs, and a difficult economic environment in China. The latter has an impact on margins as we sell a high-margin product portfolio in China. The cost actions, which we initiated towards the end of last year as well as earlier this year, started to support margins. The continued pricing actions we are taking are also having first positive effects. Accordingly and sequentially, margins were up around 100 basis points. As I said earlier, we remain very confident in our actions to drive profitability in the midterm. The actions we are taking, operating leverage, portfolio optimization, and some normalization of activity in our service business, will allow us to bring the Surface Solutions business back to strong margins in the midterm. Next, on Polymer Processing Solutions.
Orders in Polymer Processing Solutions were CHF 199 million. This is down 49% in local currency, particularly as customers are postponing filament orders. Orders in non-filament decreased by a mid-single percentage in the context of weakening PMIs globally. Q3 sales of CHF 255 million were down 31% in constant effects. This was mainly driven by the lower order book in filament. We expect slightly stronger deliveries in the Q4 . Operational EBITDA was CHF 28 million. Margins were 11.1%, impacted by operating leverage, the strength in Swiss franc, and higher input costs. In line with last quarter, we passed through higher input costs only to a limited extent in order to maintain volume. This effect will strengthen in the Q4 , and it will be counteracted by first impacts of our previously announced cost-saving measures.
Another factor which impacted our operational margin in Q3 were additional expenses to improve efficiency of a smaller joint venture, which we entered in 2019. In line with our strengthened capital allocation approach, we are currently reviewing this joint venture and are contemplating further steps in Q4. With that, let's conclude the presentation on the next slide. Our Q3 results reflect the current weakness in our end markets and currency headwinds. We are managing short-term headwinds with stringent cost containment and acceleration of our innovation pipeline. In Surface Solutions, we achieved 7% organic sales growth year-to-date, despite contracting PMIs. Our EBITDA margin improved sequentially, which is supported by the site cost and pricing measures. In Polymer Processing Solutions, we are executing in a challenging environment. We communicated on the challenging demand environment already last year, and we are proactively preparing our cost base.
These actions are on track. The underlying trend of growth in filament is unchanged and makes us confident that this downturn is only transitory in nature. The chart in the middle of the slide highlights cash margin that our filament customers earn on every ton of product they sell. The green line represents the average annual selling price of polyester products, minus raw material costs, minus conversion costs. Our customers saw a negative margin in 2015, which turned again positive in 2016. Given a certain time delay, this resulted in a challenging 2016 for Oerlikon, which was followed by our order recovery in 2017. Looking at the current downturn, the margin of our filament customers was negative in 2022. It improved again into positive territory this year. This provides a positive indication, order recovery in 2024, in our view.
Obviously, the situation of today is not perfectly comparable to 2016. While the downturn in 2016 was driven by overcapacity, this downturn is driven by the difficult market environment in China, as well as weakening global consumer demand and GDP. As such, the timing of the recovery is difficult to predict and will also depend on global economic recovery and the return of consumer demand. Despite the currently difficult market environment, we believe that midterm, we are absolutely in the right markets. We continue to execute on our midterm strategy in both of our divisions. Latest market introductions were successful and include a carbon-based coating for processing non-ferrous metals, as well as our innovative EVOsteam process for a more sustainable staple fiber production. Our innovation pipeline for the coming quarters is filled with solutions to increase the customer value of our product portfolio.
In parallel, we continue to leverage our core competencies into new areas and geographies. This includes the luxury segment with Riri, battery shielding, e-mobility, and double-digit sales growth in Americas, which is supported by the new organizational setup. In terms of profitability, we continue to execute on our midterm plan. Oerlikon is positioned as a market leader in niche markets with technology entry barriers. This is a very solid base to generate attractive margins. Also, portfolio optimization will continue to help us realize margin upside, as we highlighted at the Capital Markets Day. Our recent exit from inline ePD was the first step. We are conducting a review of a number of portfolio investments in the Q4 , and we'll decide on further optimizations. Depending on the outcome of these reviews, we might face certain one-off charges in Q4, which would be predominantly of a non-cash nature.
These actions will support profitability in 2024. Finally, we are on track with our sustainability journey to reach our 2030 ESG targets. Our value proposition is to improve our customers' efficiency and sustainability. This is strongly in demand, both in difficult and good times, and will enable profitable midterm growth. Overall, we have made solid progress on our strategy execution the first nine months. For the full year, we continue to guide for an organic mid-single digit sales decrease at constant currencies. The decrease will be closer to the mid to high end of the mid-single digit, given challenging end markets. We note that the Swiss franc recently further strengthened. For EBITDA, we foresee a group margin of around 15.5%, unchanged from our prior expectations. With that, let me open it up for a Q&A.
We will now begin the question and answer session. Anyone who wishes to ask a question may press star one on their telephone. You will hear a tone to confirm that you have entered the queue. If you wish to remove yourself from the question queue, you may press star two. Questioners on the phone are requested to use the handset only and to turn off the volume of the webcast. Anyone with a question may press star one at this time. The first question is from Sebastian Vogel with UBS. Please go ahead.
Hello, and good morning. The first one, I have two questions, I would ask them one by one. The first one, quickly focus a bit on the luxury side of things. Can you be a little bit more precise there, what was actually really underlying growth in the Q3 ? And, when you mentioned about some pressure in the Q4 , does that also mean that would even turn this sort of sub-segment growth into negative territory?
Yep. Good morning, Sebastian. Thanks for the question. You know, we're still seeing growth in luxury. So, very clearly, underlying mid- to high-single-digit % growth is still what we're seeing. We're seeing a little bit of slowdown here in the third and Q4 , but that doesn't turn it a negative growth trajectory. I think the overall performance is still on track. And, you know, what we've historically also seen in this segment is that there's a pretty quick catch up on demand once the overall sentiment turns more positive. So we're really, we're really looking more at a maybe Q4 event here.
Got it. The second question would focus on polymer processing. You mentioned there that you expect an order recovery in 2024, without being more precise there. What is your sort of base case? Do you prepare your business more for the beginning, for the mid, or for the end of such a recovery taking place in 2024?
You know, it's hard to predict when exactly that's going to take place. I think we will receive quite a bit more clarity here in the Q4 or at the back end of the Q4 . Our customers will go through their budgeting cycles, just like you know, most all companies do. And I think we're gonna get further clarity on the government stimulus in China. And so I'm expecting more clarity in the discussions with the customers throughout the back stretch of this year. And then I'll tell you, Sebastian, as soon as we have more clarity on the exact timing of this, we'll share it with you. The only other thing that I'll add is that historically, the exact timing of those things have been very difficult to predict.
Our customers tend to behave a little bit in the first customer moves, and then they all move. So it tends to be difficult to predict, but sort of what we're trying to share with you is our best view of the world today.
Got it. Then the third and last question in the final remarks, when you mentioned the growth strategy over there with optimizing the portfolio and your plans for the Q4 , is that mainly related to polymer processing, or is there also some views into surface solution? And can you add some more details, what sort of sub-business might be under review in that context?
Yeah, Sebastian, it's not limited to polymer processing solutions. It's really you know, I think we're going to head into continue to be in a challenging economic environment, at least for the next 6-12 months. And so pretty much all investments that currently don't have the payback that we're expecting are under review, and we're really looking with a lot of scrutiny at when do we expect them to make a contribution. And depending on the outcome of that, we're gonna take, we're gonna take further actions, really with a view on protecting profitability of the company in 2024.
If I may follow up, one quick follow-up in that regard. Does that also potentially then impact, additive manufacturing?
We're looking at all investments in the portfolio, and we're also looking at additive manufacturing.
Got it. That has been all my questions. Many thanks.
Thank you.
The next question is from Alessandro Foletti with Octavian. Please go ahead.
Yes, good morning. Thank you for taking my questions. I also have a couple, take them one by one. First, going back to luxury, I was surprised to hear that you do not expect any decline in Q4. Now, really, is the biggest part of the luxury business, if I calculate properly, and now they are in partial unemployment until, I believe from the newspaper, read, January or February, maybe even later. So, if that's the case, are they, are they not having less sales?
No, Alessandro, I think it's a good clarification. I think in the Q4 , discretely, demand might be down a little bit. My comments were more for the total year and then for the, you know, really our, our growth expectations for the next year and so forth. So in the Q4 , discretely, just with what we're seeing in the, in the business, it might be down slightly.
Okay. Okay, good. Thank you for this. And then, I was wondering if there is an impact on the margin. I mean, or maybe broadly speaking, the margin in Surface Solutions, I mean, it was flat, but still 10 basis points lower, kind of lower than what I was expecting. So what drives the margin in Surface Solutions? Why is it sort of not coming?
I think, a couple of things. The number one thing that you've seen this year is still the effect of the labor inflation and our continued effort to offset that with the structural cost out and pricing. And I would say that is really an ongoing effort in a lot of the business areas, that in the service areas that we're in, it takes a lot of work to do that. We're maybe a little bit later on that than with what we expected, but it's really an ongoing effort at pricing prices in a sensible manner. With our customers is the right strategy, will continue to go on, and the enhanced technology pipeline that we have for that, will help us tremendously. I think that's the number one, that's the biggest thing going on.
And then what we continue to highlight is certainly also a little bit the mix in here. You know, Europe organically is basically flat in the Q3 . You know, Americas continues to grow, so that's positive. You know, it's up about 10% in local currencies and 12% year to date. But Asia sales are down mid-teens% in the quarter, and Asia, including China, is the most profitable part of our portfolio. So I think that will normalize again as industrial production picks back up. But I would say when I, when I look back at our assumptions for the total year, that's certainly something that we that has changed. We expected a stronger year in Asia, a stronger year in China, and that hasn't happened.
Right. Can I add one thing here on the mix, regarding tooling in Surface Solutions? It used to be well above automotive, I think, sorry. Well above CHF 110 -CHF 120 million, and now it sort of has come down to CHF 90 million per quarter. Why is that? Is that, a new situation, or is there, like, pent-up demand, at some point you go back to that level?
No, I think there's, you know, sometimes there's equipment shipments, discrete equipment shipments that are in there and so on. I would say that's probably the biggest driver. But there's really no underlying change in what you've seen. We've reclassified some of the sales that we have-
Mm.
- in North America between the two, groups, but there's,
Mm.
There's no structural difference-
Okay.
A nd really, no sales drop on the tooling side, specifically.
All right. Okay, good. So maybe I can take that up with Stefan, for example. Can I ask you another final question on polymer processing? Now, the order intake has really started to go down, right? So at some point, I would expect that you have much lower sales, you know, maybe touching as well the CHF 200 million level per quarter there. And do you think you can keep the margin, like, in double digit territory if that happens?
Yes, Alessandro. The answer is yes. I think, you know, the CHF 200 million is maybe exceptionally low. Our overall expectations for next year are basically unchanged from what we told you earlier in the year. Foreign exchange certainly puts pressure on that overall level, but we're targeting double-digit EBITDA margins. We have concluded the key negotiations in Germany with workers' representatives, and have executed in line with what we told you before. We have been able to negotiate a very good level of flexibility in those arrangements that also extends to structural costs, so to administrative labor costs and so on. So our expectation is that we will be able to flexibilize the cost base significantly and maintain double-digit EBITDA margins in that business.
Okay, thank you.
The next question is from Michael Foeth, with Vontobel. Please go ahead.
Yes, good morning. Hi, Phil. Hi, Stefan. Two questions from my side, also one on luxury. I was wondering, looking into 2024, in particular, in how far can the expansion of your product portfolio, in luxury and eventually the expansion of the customer base, counter the sort of relative weakness that we see now towards the end of the year? So just to understand the dynamics better of what is really organic or, or let's say, customer volume related, and what is related to the expansion of your business, with those customers or with new customers. And then the second question would just be a clarification on, you mentioned this joint venture, that potentially is impacting also in Q4.
Can you be a bit more specific what that relates to? Thank you.
Yep. Thank you, Michael. Good morning. For luxury, you know, I think the commentary is really for... And in Q4, I don't expect our ability to deploy the new technology and reach a larger customer base to materially offset the market weakness yet. I think that's early. For 2024, we're expecting to make significant inroads here. I think very good view on the synergies that we're generating between Coeurdor and Riri, and with the PVD technology and luxury, and I think that will support sales. But Michael, I would also say we're not expecting any market weakness there in 2024. I think we actually have a pretty, pretty positive view. Again, this business tends to bounce back pretty quickly.
and we're expecting that, maybe in the first couple of months, but overall, we're expecting a positive 2024 also from a market growth standpoint. The second one is, you know, this is really a joint venture that we've entered a number of years back. It was really centered around a specific technology and a technology enhancement or, you know, broader technology we can deploy in the market. Now, after a couple of years, we really have to see what the commercialization strategy still is of that joint venture, and whether it makes sense to continue this specifically in light of the more demanding, the more challenging demand environment in 2024.
So I would say, you know, and then depending on how that turns out, you know, we would obviously have to exit the joint venture. The final decision has not been made, but I think that's, that's basically what it's about. It doesn't really change anything in the overall, PPS strategy.
Okay, and that's in Surface Solutions?
That's in Polymer Processing Solutions.
Polymer processing. Okay. Thank you.
Thanks, Michael.
Great. So thank you, everybody. This concludes today's call. In case of further questions, don't hesitate to contact us in the IR team. Thank you for your attention today, and goodbye.
Ladies and gentlemen, the conference is now over. Thank you for choosing Chorus Call, and thank you for participating in the conference. You may now disconnect your lines. Goodbye.