Ladies and gentlemen, we warmly welcome you to the earnings call regarding the Q3 figures of 2026 of the POLYTEC Group. I am very pleased to welcome POLYTEC CEO Markus Huemer, who will guide us through the presentation shortly, after which we will move on to a Q&A session via audio line and chat. With that, I am handing over to you, Mr. Huemer.
[Non-English content] . Good morning, ladies and gentlemen, and welcome to the POLYTEC results call for the first nine months of 2026. Our share price has seen considerable movement in recent months, rising sharply from September to EUR 6.50 before falling back to around EUR 4, following our revised outlook in late October. Today, I want to explain both the short-term challenges and our medium-term perspective. Our direction remains unchanged: improve the performance of our automotive business while building a second growth pillar outside the automotive industry. I will start with the overall situation, explain the outlook revision, update you on our diversification projects, and then cover the financial results. Where are we? POLYTEC continues to adapt to fundamental changes in the automotive industry. We have adjusted capacities, reshaped our profitability and returns, reshaped our portfolio, and maintained disciplined capital allocation.
This requires a careful balancing act between transformation and innovation, both in automotive and in developing new markets. Throughout this process, we have maintained a solid level of unadjusted free cash flow, even and despite substantial transformation activities. We are not basing our strategy on a recovery in the European automotive demand. We are managing our automotive business for profitability and returns while driving diversification into non-automotive markets, targeting a revenue share of around 30% over the coming years. After nine months, revenue was lower, largely reflecting portfolio changes. However, our EBIT margin improved to 2.3%. Net profit nearly doubled from EUR 2.4 million- EUR 4.2 million, and our equity ratio reached approximately 50%. We totally understand the investors' impatience to see our non-automotive project translate into revenue. Believe me, we, and specifically I, share it.
Later in this presentation, I will outline the progress we are making and why it reinforces our confidence in this strategy. Latest update. Let me address the outlook revision announced on October 29th. The announcement triggered a significant share price correction. Nevertheless, at the reference date shown here, POLYTEC shares remained around 30% above the beginning of the year, compared with a 17% decline in the STOXX Europe 600 Automobiles & Parts Index . Two factors drove this revision. First, major customer reduced their first quarter volumes forecast at short notice against an already challenging automotive market. Second, the transfer of painted exterior projects following the Weierbach closure has caused greater operational burdens than planned. Project integration and technical implementation, particularly at our supplier, have taken longer than expected. Alongside stabilizing operations, we are implementing further automation and the associated workforce reductions. We consider these operational effects temporary.
Therefore, we are monitoring customer call-offs for early 2027 very closely. What does all of this mean to our midterm perspective? The current market environment confirms our strategy, expanding our non-automotive business to drive growth and make POLYTEC more resilient to market volatility. Our principle remains the right strategy for each product area. Automotive is and remains our core business. Here, we maintain a prudent investment policy, focusing on competitiveness, portfolio discipline, and appropriate production capacities rather than pursuing volume at the expense of returns. In smart plastic applications, we transfer our materials, engineering, and industrialization expertise into new markets. This is where we intend to build our second growth pillar. Let's put the spotlight on non-automotive. Our ambition for non-automotive activities is to contribute around 30% of revenue over the coming years.
We address high-volume markets supported by long-term trends, particularly circular logistics, alongside applications in construction industry. Our approach combines genuine product innovation with diversified opportunities and capital discipline. We apply our broad automotive expertise to promising new market segments. Our wide range of technologies enables us to differentiate our solutions in the markets. Let's see what happens recently. Our pipeline combines proprietary products, joint customer developments, and partnerships. We are developing genuine innovations, not competing with interchangeable products on price alone. This creates differentiation, but also requires us to demonstrate their value to the market and establish new applications. Therefore, the right partners are critical. We are working with leading market players to translate real user needs into viable products, including requirements that emerge only during the development phase. Compared with established automotive programs, development and validation take longer, and launch dates are less predictable.
Public sector procurement can add further delays. These are real commercialization challenges, but they do not at all diminish the underlying opportunity. The strongest evidence of progress is the active involvement of market-leading customers in these developments. That is not yet series revenue, but it is tangible progress towards commercialization. Our pipeline is maturing, our partnerships are strengthening, and this is what underlines our, and especially my, confidence. What does it mean specifically? We see this picture, we have had this in, I think, in the annual shareholder meeting already. We have updated it in the half-year results, and we do another further update here. The orange line show the progress the specific projects have. In the construction sector, one project went from market sounding already into product design. Another construction project went from the phase of idea to starting the market sounding.
The plant tray on the very right is already on the market. PPWR regulation will drive the demand, which is currently early adopter stage. Two fantastic load carrier concepts made it into the prototype phase already. Tools are to be finished in the upcoming weeks before year-end. BOOXit, we have been in the media, and we show in more detail as it hit an important milestone as well. It reached the pre-series production in September this year. BOOXit boxes combined robust logistics equipment with digital connectivity. The Austrian startup BOOXit developed the concept and digital system. POLYTEC is the industrialization partner and exclusive long-term supplier. What we see, a great product idea alone is not enough for a successful market launch. Design for manufacturing is critical to turning innovation into a commercially viable product. This is where an industrial partner like POLYTEC makes the difference.
We redesigned BOOXit in recent months for durability and efficient industrial production. This solution is attracting massive interest from both civilian and military users. The photograph on the slide shows its public demonstration on an autonomous ground vehicle by the Austrian Armed Forces at Vienna's Heldenplatz at National Day. The first boxes were presented in September to around 80 participants from industry, the military, research, and the public sector in our plant in Ebensee. Initial testing by the Austrian Armed Forces has already taken place. Further industrial application tests are being developed with leading companies across several sectors. The focus now is on validating performance in practical use. On the load carriers, plastic pallets. Our new plastic pallet development addresses demanding logistics applications, particularly automated handling. The challenge is to combine long-term durability with low weight and competitive cost.
We are also developing flame-retardant variants and versions with improved hygiene properties for food industry applications. The design uses no metal inserts, enabling easier recycling. In short, we are rethinking the conventional pallet around functionality, efficiency, and sustainability. First prototypes for initial functional testing are expected in January 2027. Dear listeners, not just one, but several products with significant market potential are advancing through development. To maximize their chances of commercial success, we are working with leading industry partners. Together, this progress and the partnerships reinforce our confidence in achieving significant commercial breakthroughs. From the strategic part to the financials for the first three quarters. Let's take a closer look on the financial figures. Again, we improved relevant earning KPIs compared with the first nine months of the previous year. Revenue was EUR 427 million compared to EUR 550 million in the previous year period.
EBITDA amounted to EUR 31 million, slightly below last year, but the EBITDA margin increased from 6.3%- 7.3%. EBIT rose from EUR 8.9 million- EUR 9.7 million, and the EBIT margin improved from 1.7%- 2.3%. Earnings per share increased from EUR 0.10- EUR 0.19, nearly doubling the net result. The improvement in margin reflects our portfolio changes and cost measures. It is also important to distinguish the nine months' performance from the latest quarter. In Q3 alone, EBIT was EUR 1.4 million below the EUR 3.3 million recorded a year earlier. We are not yet claiming a uniform improvement in every quarter. The underlying revenue mix and customer call-offs remain influential. As of Septeme 30th, the equity ratio stood at 50%, compared with 43% a year earlier and 46% at year-end 2025.
This improvement was achieved despite the dividend payment of EUR 4.4 million in June, supported by positive earnings in reduction in total assets. Net financial debt was EUR 20.6 million versus EUR 57 million, the prior year reporting date. It was slightly higher than the EUR 17.6 million at year-end 2025, a distinction worth making. Cash and cash equivalents amounted to EUR 43 million, and we can report a positive free cash flow of EUR 14 million. Our objective has been to reduce financial risk while maintaining the ability to invest. The stronger balance sheet provides a solid basis for taking advantages of strategic opportunities, subject to disciplined capital allocation and expected returns. The key message is clear: a stronger balance sheet, significantly lower net debt year- on- year, and improved capital efficiency. To our portfolio. Our market areas developed differently in the first nine months.
Passenger cars and light commercial vehicles generated EUR 308 million, down 21%, largely reflecting the disposal of our U.K. operations. Commercial vehicles generated EUR 76 million, slightly above the previous year. Smart plastic applications recorded EUR 42 million, down approximately 18%, partly due to the fluctuation call-off of a major customer. These developments demonstrate that our current non-automotive sales are not yet insulated from volatility. Building a broader base of customers, applications, and recurring series business will take time. Let me conclude with the updated outlook for the full financial year 2026 and the priorities going forward. We expect consolidated sales of around EUR 560 million and an EBIT margin in the range of 1%-2%. The revised outlook reflects short-term adjustments in customer call-offs and changes in product mix, as well as temporary operational effects, as explained in the beginning.
Looking ahead, there are three priorities investors should measure us against. First, our portfolio adjustments must continue to translate into improved margins and attractive return on capital employed. Second, we will maintain a strong financial position, providing the flexibility to pursue selected investments and strategic opportunities. Third, smart plastic applications must progress from development milestones to customer approvals, serial production, and profitable revenue. This transition will take time, and it is a pain sometimes. But we are constantly making progress, and we have absolutely strong partners. Our focus remains on improving operational performance in automotive while building a broader and more diversified customer and product portfolio. This is essential to reduce our exposure to the market fluctuations and improve earnings stability over time. In line with our dividend policy, we intend to continue distributing dividends subject to achieving an appropriate net profit.
We are aware that skepticism concerning the automotive sector and ongoing instability weigh on our investors' confidence. Nevertheless, we have proven our adaptability, which remains essential. Our non-automotive projects are maturing. Achieving full market readiness within the next year and scaling thereafter will be the next driver of value. This was our statement on the development in the first nine months of 2026. Thank you for your attention. Now it is time to hand back to the operator, Maureen Ike, to kick off the Q&A session. Thank you.
Thank you very much for the presentation. We just stopped the recording and are among ourselves now, so we are opening the Q&A session. Ladies and gentlemen, now it is your turn, please. You are very welcome to ask your questions via audio line. For that, please click on the raise hand button. Or if you are dialed in by phone, please press star key nine to raise your hand and star key six to unmute yourself. Should you not be able to speak freely, you are also very welcome to place the questions in the chat, and I will read them out for you. We already have some risen hands. Mr. Wolfgang Matejka, you should be able to unmute yourself.
Yes, hello. Do you hear me?[inaudible]
Thank you. Thank you, Mr. Huemer, for your forward-looking words and for the opportunity to talk to you. What is my question in relation to smart plastics is, what is the competition situation of your company in relation to other companies outside? Is there any USP that POLYTEC is covering or carrying to be a serious taking partner? The second part to that question, is there any strategic shift in the client universe that enforces them to choose plastics? For instance, the pallet system as a reshuffling for the wooden system and so on, or the implementation of chips, or the duration of the package and so on.
Yeah. Thank you. That's a very good question, and if you have day time, I could spend on it. To keep it brief, what is our USP? I experience this more and more. It was a big challenge to communicate this, but what we see in the recent development, the absolute key USP is that we are independent from a specific plastic technology.
Okay.
Especially in the packaging and logistic market, polypropylene is the basically only mass material that is known to these applications. What we can provide, we can provide fiber-reinforced, we can provide thermoplastic, polyamide, polypropylene, long fiber, short fiber-reinforced material, UD tapes, everything.
Okay.
That gives a massive wide opportunity to adapt the products to specific demands that could not be fulfilled so far. I have lately been to one, the largest market player in this industry, who has a problem not solved since 10 years by plastic pallets. We are very, very confident that we can solve it because we can use other technologies than are commonly known on the market. This is one of the USP also in the construction industries. We try to meet several preferences of the product by using meanwhile the fourth technology to meet it, and with two, we are passing the tests, which have not been known to the construction industry by now.
What we see, the longer we work together with these customers, the more they appreciate and understand the difference having a wide technology partner as POLYTEC on board to develop a product to the demand. This is the one thing, and the second thing is that there are massive drivers on the strategic demand of them. PPWR is one packaging regulation who is driving the returnable packaging, especially within Europe. However, there is also purely the availability of wood on the one hand. Wood that survives several turns and loops of pallets, for example, to still work in an automated warehouse, because normally after three, four cycles, they are damaged and cannot be used by an automated system anymore. This drives repair costs at the pallet poolers to repair the wooden pallets, and it's the availability of wood on the other hand.
A lot of factors which make me, and especially you, are sometimes surprised why we are so optimistic even if there is no sales. Why we are so confident that with these several projects we have in pipeline, there is a massive tailwind in that way against the massive headwinds in automotive that supports our strategy.
Mm-hmm. All right.
I hope I could keep it
No, perfect. Perfect.
A question, is there any issue on the weight? Because I can imagine that the plastic pallet is even lighter than the wooden one, so that the transport industry as well is forcing that development.
Yes. It's not necessarily lighter than the wooden pallet, but it's massively lighter than any plastic solution that is available on the market, because usually they have metal inserts to have the same stability. Weight is an issue. On the pallet, compared to wooden pallet, we can match it. Maybe in further development, reduce it. On the food boxes, food crates that we do for IFCO, we have a lightweight project. Weight is a crucial factor, specifically for a certain type of food, where without the weight reduction on the boxes, they are not able to fill the full containers because of weight, not because of volume, because of weight. This drives logistic costs, and if we can make the boxes 25% lighter, they can switch from cardboard to returnable packaging. There are areas where weight plays a major role.
Also in the construction industry, for the handling by the workers, this is an issue. Yes, partly yes, not in every case.
Last part. As far as I know that your clients are, in relation to the pallets, sitting in U.S., or one or two of them are sitting there. The latest history just told us that the production side in the U.S. is always full of advantages in receiving some orders. Are you preparing that step as well?
If the order is backed by volume, yes, definitely. That's why a strong balance sheet is one of our focuses to keep the possibility for investments, not necessarily for automotive growth, but specifically for something like that.
Thank you, Mr. Huemer. Thank you.
Thanks.
Thank you very much. There are further raised hands. Mr. Mustafa Hidir, you should be able to unmute yourself and ask your question.
[inaudible]
Hello, Mr. Huemer. Thank you for taking my question. I hope you can hear me.
Yes, perfectly.
Well, regarding your largest pooling customer, which reduced call-offs in Q4, what kind of visibility do you have looking into H1 2027? In that context, do you expect some kind of catch-up effects regarding the pooling volume?
That's a glass ball. Technically, we have visibility over six months, but in reality, it never matches the six months call-off. There was an expected catch-up for Q3 in Q4. This was taken out again, which was one of the reasons for the revised outlook. Everything that is more than two months, I would not 100% believe, and I wouldn't dare to count on it. Basically, also at the end of the year, until the winter shutdown of the customers, the new call-offs are basically at the very end of the year or beginning of next year that give us a confidence level that's worth thinking about it. We see no dramatic downturn. We see stability based on this low volume, but the expected catch-up didn't come in Q4, rather a slight return. Let's see what Q1 brings.
All right. Thank you so much. I have a second question. It's almost the same question, but for the automotive customers. It seems to me like the drops on the call-offs were quite short-term, and I'd like to get a feeling of how that affects your planning horizon looking into 2027, because normally you have at least some months of planning visibility, and it seems to me like not the case anymore. Maybe you can help us to assess that.
No, it's not that dramatic as it sounds. What we basically do in our budget is that we don't put our planning on the numbers that the customers are providing. We usually do reductions on that, and overall, not on the specific products, but at the bottom line, this is okay-ish to schedule on that. The issue was on the short term, the reliability was bigger. That's why we counted on a slight recovery in Q4, which on short notice didn't realize. But I would not question the planning base for the 2027 year. This is so far as it was the recent years. The longer you are in the industry, the more you can predict it. It was absolutely unpredictable in 2022, 2023, but recently, at least the bottom line is to be planned on the specific product.
We know there is a lot of volatility between this variant and that variant. Is it more electric cars, more combustion cars? This customer stronger or that customer stronger? But it's okay, and we can live with it.
All right. Thank you so much. That's from my side.
Thank you.
Thank you very much. The next raised hand is from Markus Remis. You should be able to unmute yourself as well and ask your question.
Hello. Good afternoon. I hope you can hear me well.
Yeah.
Yeah. Okay, great. I would have one question related to the non-auto sales development in the third quarter. I was pretty surprised to see more than EUR 20 million, considering the notion that was given after the first half, and especially also remembering the reasoning for the profit warning. Can you put this into perspective? I do not think that is all plant trays. Is it something about-
No, no. Absolutely not. I am smiling because I expected this question reading your analysis. I fully understand the impression. If you remember back, we said in the beginning of the year, we have higher stocks because of a pre-production for our non-automotive customer. What we see in sales, and this is sales only, is that we sold the produced stock of the first two and a half quarters in the third quarter. This is sales only. All the value add was made over Q1, Q2, and Q3, where with the value add, the major part of the profit is already realized in these quarters. So it is a pure sales figure that does not represent the profitability and not the production output. This was distributed year-over-year, and this is the downside of it.
Year- over- year, we had approximately EUR 50 million non-auto sales in the last year, and now we have EUR 40 million. It is not a recovery in Q3 that is suddenly happening and so promising for Q4. It is just selling the produced stock from the whole year 2026.
Okay, so it means actually that the first two quarters were rather understated in terms of-
Of sales only.
Yeah.
Not on profit, yeah.
Okay. The profit recognition that was already in the first-
Yeah, we have this IFRS 15 issue where you have from the finished goods, you have the profit already.
Okay, that makes more sense.
Do not like the regulation, but it is as it is.
Okay, thanks for clarifying. On the plant tray revenues as the one product that are currently in the market launch phase, can you help us understand the kind of revenue pattern and demand pattern also going into 2027? Because apparently this is a product where you had high hopes.
Yeah. What happens in this market, and this will all of these are ideas that you get when you are on the market and understand it more specifically. What happens with the plant tray and with returnable packaging? Plants are basically sold either at the garden shop or at a Bauhaus or a Hornbach or whatsoever. A lot of it is sold by discounters like Aldi or Lidl. If you remember the returnable bottles for milk or whatsoever was a massive challenge to put into these players. Why? They know they will have an obligation to have a returnable share in future. What they see is, okay, there is a product with this returnable plant tray that we can use. What they also see is, oh, the customers recently, they took their flowers in their black tray, which they throw away at home.
They take it leaves the shop, and it never comes back. All of a sudden, people think they can bring back this returnable packaging, and they say, "Oh, where to put it?" We have neither the people and especially not the space to handle this returnable packaging. This is blocking us, and I didn't expect it, to be honest. I was more ambitious. This is blocking us from doing the massive impact from one year to another, but it's not hindering because the obligation is there because of the packaging regulation. As they are now taking back the bottles, because they have to take them back, they will provide the room, the space, and have to provide the labor to handle the returnable packaging and put it in the pricing at the end of the day.
That's the reason for hindering a wider success for the moment, but the obligations start, must latest 2029, and nobody can wait until December 2028 to achieve this share of returnable packaging. That's the technical background on it.
Okay, understood. That means that theoretically there is another two years of-
No
how to say-[inaudible]
Yeah, theoretically. Theoretically, yes. If everybody hopes that the regulation will be delayed, then it is theoretically two years, but I don't expect it on the packaging regulation.
Okay. But talking to your customers, do you have a feeling that 2027 could already provide us more demand momentum, or is it again more of a transitional year, wait and see?
It is like with the food trays. If they get a big account that decides to switch the packaging, then it is one of a sudden we have to fill. If, for example, Aldi would decide, it would be a huge impact, and we couldn't produce it. When this is likely, I have no idea.
Okay.
The problem is not only on the distributors, it is on the plant producers. It is in between the big dealers, between the producers and the distributors. So the whole supply chain has to match. This is done by Euro Plant Tray. This is the organization behind it. We are the producers, and the distributors are part of this Euro Plant Tray organization. So they are driving it, and they are setting it up. It is out of our influence, but we see it, we watch it, we follow it closely. There is a lot of movement, and it will take time to prepare. But once the supply chain is clear who has which responsibility and with what space and systems can we handle it and how do we transfer the cost, then it should be speeded up significantly.
Okay. Then on the chart that you provide regarding the progress on the smart plastics, thanks for updating this, very useful. Can you just elaborate the pallets? Is that load carrier one or load carrier two?
Both. Two different concepts-
Okay
that we are driving. One is not our concept, but here we would be the industrialization partner. The second one that has moved a bit more forward and switched the color for the ones who have in mind the latest chart. This is our internal concept with our internal IP from scratch.
Okay. Can you remind us of the competitive advantage? Because there are producers of plastic pallets in the market.
As I said before, the strengths, the option to provide different technologies, not only polypropylene. All of the plastic pallets are basically in polypropylene.
We have several technologies where we can push properties of the service, push properties of the product to match the real market demands, which current plastic pallets do not fulfill. There are a lot of available, there are specific use cases where these are sufficient, but not in every use case. That is why no plastic pallet ever succeeded in a mass production, not only because of properties, but also especially related then to cost if they should meet these properties because of the metal inlays and the complication. Side note, our concepts both would all be 100% recyclable.
Yeah. Okay, understood. Last question regarding the production transfer from Weierbach to Hörsching, and the related issues. Can you give some confidence or share your reasons for confidence why these are just temporary and not also impacting the first quarter or second quarter eventually?
Yeah. The pity is, these are the same product that caused the problems in Weierbach two years ago.
Yes.
Very, very complex, very wide variety and a huge number amount of variants that need to be industrialized. We do not do the painting in-house anymore.
We have learned a lot, but the issue is also on the supplier side who does the painting now. He had also had some industrialization issues to do all these developments in parallel all time while we closed the plant already, and there was no option to extend it. This put us again in some kind of supply shortages that then you are struggling. All the same history as it was in Weierbach, but the industrialization is done. We are still here and there are some backlogs, so we are not yet over it. But we know this from the Weierbach issue, we could settle it there. We will settle it here. How long it takes? The massive problem have been Q3 and stabilizing starting now in Q4. It shouldn't be a very extensive long-term issue.
Okay. Point taken. Thank you very much.
One open issue remains. We have still some, and we had to take this portfolio because the customer didn't find another supplier for that. My priority is not in painted exterior, and the portfolio management is not yet done in this area.
Okay, understood. Thank you.
Yeah.
Thank you very much. We have a further raised hand from Simon Scholes. You should also be able to ask your question now.
Yeah. Simon?
He has not unmuted himself yet. I sent an invitation.
Can you hear me now?
We can hear you now.
Okay, great. Thanks. Sorry about that. Yes, thanks for taking my questions. On the plastics business, I mean, you said that you have launched the plant tray business. I was just wondering what other products accounted for the EUR 20 million in turnover, or over EUR 20 million in turnover that you booked in smart plastic applications?
Here and there a little bit, but the mass majority and the overwhelming majority is the food crates.
Right. Okay.
This is also very volatile. I do not know how long you are following us already. This is where I did the remark, as with the food crates. We supply this to IFCO, who is the pooler for, or the largest pooler for food crates for whatsoever, REWE or Aldi or SPAR or whatsoever it is. They pool these boxes. They have around, I think it is 150 or 200 million crates in the loop. There are normally roughly 10% that break and need to be reproduced. That is the standard volume. Once they get a big account, then we have these massive increases in several quarters where we are fully utilized, because then they need to fill the whole supply chain of an Aldi.
If they lose an account, which happened this year, then they use the existing stock of crates to exchange the damaged boxes, then there is suddenly basically zero demand. This is very, very seldom, but it happened this year, which is one of the reasons, despite the dryness in the plants across Europe, that the demand is reduced from 50 million- 40 million in the first three quarters. They did have the expectation to recover it. This is not only the automotive customers. That is why we did the pre-production in the first two or three quarters, ultimately, they did not yet recover to a point which is normal, but it is getting close to what we see, at least in the short term.
Okay. Can we expect another roughly 20 million in Q4 from the plastics business, or more, or?
No.
Okay.
The other sale of sales was already included from the first quarters.
Okay.
They average approximately, you can expect.
Okay.
Just a gut feeling, to be honest, but it should be as far as I know.
On the plastic pallets business, I mean, you've talked about the advantage of having such a diversity of different plastic technologies at your disposal. I mean, do you see any competitors in the plastic pallet business that have a similar diversity of technologies at your disposal?
I do not know the whole plastics industry. I could not tell that.
In the pallet business specifically, I mean.
What we see, and therefore I mentioned it, there is one specific problem of one of the largest, or the largest provider, which has not yet been solved since more or less 10 years.
Yeah.
It is obviously not simple, and there are not a lot of producers. There are several concepts that are competing. I would say one, two handful, not more worldwide, at least what I know. There is never no competition, but it is very, very limited. And to give you a feeling, I think it is approximately 300 million- 400 million wooden pallets are worldwide only for the major pooler. 400 million of these pallets need to be replaced from wood into plastic. So there is room for one or two suppliers.
Okay.
One told me, "If you do four million pallets every year, Christopher Columbus is closer that he found America than what the pool is exchanged.
Okay, got it. And then just the last question on Weierbach. Can you give me an idea of what the turnover contribution of Weierbach was in 2025?
In 2025, it was EUR 40 million-EUR 50 million, something in between. But the share of it obviously is in our production, which is creating now these hurdles. Not all of it is deleted. Some of it we kept, like roughly EUR 10 million ± remained within the POLYTEC Group. All over all, U.K., the exit of Schoten and Weierbach, in a full year, it would be around EUR 100 million sales that these three entities contributed to the 2025 sales, to give you a feeling to compare pre and post-exit of these entities, full year.
Okay. Well, thanks very much. That's very helpful.
Thank you very much. There is again a risen hand from Markus Remis. You should still be able to unmute yourself.
Yeah, thank you. A follow-up related to the cost development now that oil prices are up sharply in recent months, notwithstanding the correction in the last couple of days. How should we generally think about cost inflation on the material side? I think in the Q2 call, it was mentioned that no burden from a price cost squeeze is expected. Is that still the working assumption that you will be able to pass on cost inflation?
I didn't say no impact, but limited impact because after 2022, 2023, we have established processes with our core customers for the core portfolios with a certain pain share for us, but basically a process that allows us to flex the material costs. The recent results of our lovely OEMs are down. That's why the ideas come back to eliminate these existing processes and to defend against it. As always, if they are under pressure, they try to put pressure on the suppliers. But honestly, the situation and the legal side is very, very clear, so there is not much room to discuss about it. I'm still basically the same opinion. Yes, raw material fluctuations up and down are to be passed forward to the customers. Not EUR for EUR, but the huge majority. Otherwise, it's not possible for the whole industry in Europe.
Understood. Thank you.
Thank you very much. This is a quick reminder now to all the participants to use this moment and ask your questions, either by raising your hand or by placing them in the chat box. Since we don't seem to have received further questions, we come to the end of today's earnings call. Thank you very much for your interest in the POLYTEC Group. Should you have any further questions at a later date, you're very welcome to contact Paul Rettenbacher at Investor Relations. A big thank you also to Markus Huemer for your presentation and your time. I wish you all a successful day and hand over to you, Mr. Huemer, once again for the closing remarks.
Yeah. What we have seen is this downturn again after the increase in the share price, which is disappointing. Honestly disappointing. I didn't expect it to be so dramatic. I hope I could give you a good feeling on why I'm still very optimistic on future development. We have proven that we handle automotive industry, and we will handle this, whatever the development will bring us. But automotive is not an industry where you can earn 10%, 15% return on capital employed as a plastic supplier. That's why we have the smart plastic strategy. Even if not realizing, we are pushing it. We are absolutely making progress. We have the biggest customers on hand that believe in us, that co-develop with us. That's the perspective POLYTEC is offering and showing.
It takes time, but with a strong balance sheet, time is not a massive pressure that we had other times already. Thanks for listening. Thanks for your interest. Thanks for your belief in POLYTEC. I am here to make it real. Thank you very much. Bye-bye.