Ladies and gentlemen, thank you for standing by, and welcome to Axalta's Second Quarter 2019 Earnings Conference Call. All participants will be in a listen only mode. A question and answer session will follow the presentation by management. Today's call is being recorded and replays will be available through August 1st. Those listening after today's call should please note that the information provided in the recording will not be updated and, therefore, may no longer be current.
I will now turn the call over to Chris McCray. Please go ahead sir.
Good morning. This is Chris McCray, VP of Investor Relations. Thank you for joining the call today to review our second quarter 2019 financial results and for your interest in Axalta. Joining me today are Robert Bryant, CEO and Sean Lannon, CFO. We released our financial results this morning and posted a slide presentation to the Investor Relations section of our website at agalta.com, which we'll be referencing during this call.
Both our prepared remarks and discussions today may contain forward looking statements, reflecting the company's current view of future events and the potential effect on Axalta's operating and financial performance. These statements involve uncertainties and risks and actual results may differ materially from those forward looking statements. Please note that the company is under no obligation to provide updates to these forward looking statements. This presentation also contains various non GAAP financial measures the appendix, we've included reconciliations of these non GAAP financial measures to the most directly comparable GAAP financial measures. For additional information regarding forward looking statements, and non GAAP financial measures, please refer to our filings with the SEC.
I'll now turn the call over to Robert.
Thanks, Chris. Good morning, and thanks for joining us to review Axalta's second quarter financial results. We're very happy to report a quarter with stable top line sales growth ex FX, expanded consolidated margins and strong operating profit and earnings performance, supplemented by excellent corresponding cash flow. Underlying drivers remain broadly consistent with our first quarter results notably including acceleration in average pricecost gap closures as well as ongoing progress with Axalta Way productivity savings which remain on announced in June that we are conducting a review of strategic alternatives. The board and management remain committed to maximizing value for our shareholders.
If I'm sure you can appreciate, we're not prepared to share any incremental information regarding that review at this time, and we thank you for your patience until we can share any conclusions. Shifting to operating highlights for the quarter. As you can see on page 3, consolidated constant currency net sales were stable in Q2. A reported 4.5% decline included a 3.5% negative foreign exchange impact as well as a 0.9% negative M and A impact driven by the sale of our interest in a previously consolidated joint venture in China which we noted on our April earnings call and included in our updates to our full year guidance. The flat organic net sales included lower volumes, offset by equally strong price mix effects.
Performance Coatings net sales were flat before currency effects and increased 1.2% before M and A related impacts. Transportation Coatings net sales decreased 2.4 percent ex FX, driven by lower light vehicle global production volumes. Price mix in light vehicle showed solid and encouraging positive acceleration as we continue to work with customers to adequately compensate for the ongoing raw material inflation experienced We reported 2nd quarter consolidated EBIT of $197,000,000, a 9% increase compared to the $182,000,000 in the same quarter a year ago, driven by strong pricemix drop through to earnings as well as including benefit from productivity efforts across the business. Which included year over year benefits from stock based compensation in the quarter. Volume effects were a notable offset to profit while ongoing variable cost inflation and FX also weighed on results, though to a lesser extent than Q1 as anticipated, given the overlapping sequential headwinds seen during 2018.
Adjusted EPS for the quarter was $0.52 per share, which compared with $0.46 per share in the prior year quarter with drivers consistent with those just mentioned at the operating level. Looking at our end markets briefly, refinish net sales increased 3.6% ex FX in the quarter. Grew net sales ex FX in the mid single digits across North America and EMEA, while other regions appeared to exhibit more tepid economic business conditions. We continue to efficiently offset variable inflation with appropriate price management to sustain the broader margins of this business. In volume terms, we continue to see moderate pressure from the North America region, which we attribute to ongoing distributor channel destocking and continued adoption of our more efficient premium paint systems.
We remain on track for full year expectations for both net sales and profit bolstered by continued share gains saw a net sales decline of 1.1 percent in the quarter ex FX and before negative M and A related impacts from the China JV sale. Drivers of the slight pullback in net sales ex FX include low single digit net sales decreases in North America and EMEA, offset by solid growth in Asia Pacific, excluding our JV disposition impacts. Overall volumes were down mid single digits, while average price mix increased low to mid single digits. The contraction correlates broadly to global industrial production indicators, which remain slow and appear to accelerate negatively somewhat in the period. Looking ahead, we've somewhat reduced our volume assumption for the balance of the year, though offset largely by better than expected pricemix outcomes and additional cost control across the company.
We also continue to invest in business declined 4.3% ex FX for the 2nd quarter, reflecting lower production rates for our OEM customers in most regions, and more severe ongoing demand weakness persisting in China. IHS production forecast for 2019 have been further reduced several times in recent months, now calling for a 3.7 global production decline versus a 1% lower assumption as of March end. The updated global production guidance now includes a 4.7% reduction from EMEA, a 2% decline in North America and a 4.1% decrease for Asia Pacific, including a negative 6.9% in China. Commercial vehicle net sales increased 4.5 percent ex FX in Q2, including ongoing strong production of commercial trucks in the Americas. And continued solid demand for non truck customers across our business.
Price mix was down slightly in the period but margins for commercial vehicle have seen continued improvements due to volume contribution. Regarding our balance sheet and cash flows, 2nd quarter free cash flow was solid and we reconfirmed our full year free cash flow targets of $430,000,000 to $470,000,000. We finished the quarter at 3.5 times net leverage versus 3.6 times net leverage at March quarter end. We repurchased 1,600,000 shares for a total consideration of 39,500,000 in the 2nd quarter at an average price of In Refinish, we continued the launch of several new products in EMEA, including a new ultra high productivity primer sealer and a new waterborne base coat performance additives. We also launched our new premium Refinish Standox product line in China.
In our industrial market, we have partnered with a robotics company to introduce a real time in line monitoring solution to optimize a process related to coding electrical motors, which enhances customer quality and productivity. Finally, in Transportation Coatings, Axalta continued its focused on harmonized coating technologies, with the first commercial launch of a direct to plastic lowbake basecoat clearcoat system, which significantly reduces overall cycle times for customers. Regarding our 2019 execution priorities, we remain firmly focused on meeting our objective of generating profitable growth. The back half of 2019 is expected to be moderately challenging given ongoing lower automotive OEM production rates in key markets we serve. As well as somewhat subdued industrial coatings demand in North America and Europe.
Further we remain committed to actively managing our cost structure to ensure broad margin stability, regardless of the volume backdrop, and our Axalta way planning remains highly engaged and an integral part of our goal achievement. I'll now turn the call over to Sean for further review of our financial results.
Thanks, Robert, and good morning. Turning to Slide 4, consolidated constant currency net sales decreased 1% year over year including a flat result in Performance Coatings and a decrease of 2.4% in Transportation Coatings. Excluding M and A impacts, which incorporate the sale of the interest in the consolidated JV in China, consolidated net sales would have been flat with Performance Coatings posting a 1.2% increase. The top line result was driven principally by solid ongoing price mix outcomes. Offset by volume pressure across most end markets and regions.
On the pricing side, Axalta posted ongoing stronger capture within Performance Coatings. And acceleration within Transportation Coatings, driven by sequential uptick in light vehicle, which is our 3rd sequential quarter with positive price recapture. FX translation was a 3.5% headwind for the period and the drop through impact of this was largely consistent with our overall corporate margins. Key sources of pressure included the euro, Renee and Brazilian real. Q2 adjusted EBIT of 197,000,000 was a 9% increase from the prior year and margins improved 210 basis points to 17.1%.
This result was driven by strong pricemix drop through as well as continued productivity benefits, including a benefit from stock based compensation forfeitures in the quarter. Our bottom line growth was delivered despite volume headwinds across most end markets the ongoing FX impact and raw material inflation at mid single digit percent increases at the adjusted EBIT level, albeit at moderating rates against prior year comparisons as anticipated. Turning to Slide 5, Performance Coatings 2nd quarter net sales were flat year over year, excluding a 3.5% negative FX impact. And up 1.2% excluding the JV, Sal related impacts previously noted. Organic growth drivers included a 4.7% increase and average price mix, offset partially by a 3.5% decrease in volume.
Refinish produced 2nd quarter constant currency net sales growth of 3.6% versus the prior year quarter, which was slightly faster growth sequentially relative to the 1st quarter, driven by improved price mix contribution. Net sales growth ex FX was led by solid increase in North America and EMEA while other regions were more subdued in the period. Volumes in the period included somewhat weaker Asia Pacific and Latin America results, along with the moderate impact from distributor channel inventory management in North America. Axalta channel checks with end customer body shops continue to suggest steady demands including steady purchase patterns from distribution. Total refinish net sales ex FX also continued to grow positively despite the volume related headwinds as the benefit of improved product mix and continued pricing benefits accrue to positive net sales growth.
Industrial end market net sales, ex FX decreased 5.3% year over year in second quarter, but decreased 1.1% excluding the impact of the China JV sale. The modest decline was driven by volume pressure in most regions, offset by solid gains and average price mix from all regions. Volume pressure is fairly broad based and global industrial production in the period appeared to be the primary underlying factor. Performance Coatings 2nd quarter adjusted EBIT of $128,000,000 increased 17.2% year over year with strong continued price mix traction and benefits from productivity initiatives, partially offset by volume drop through impact, continued variable cost inflation and negative FX impacts. Adjusted EBIT margins of 16.9 percent increased 300 basis points year over year, including both price mix tailwinds as well as cost reduction benefits against the prior year quarter.
Turning to Slide 6. Transportation Coatings net sales decreased 2.4% year over year in the second quarter before FX headwinds of 3.6%. Segment volumes decreased 5.1%, slightly offset by favorable price impacts from light vehicle. Light vehicle 2nd quarter net sales decreased 4.3% excluding a 3.9% FX headwind. Volumes decreased mid single digits overall, driven by lower production rates globally in light vehicle and most notably from China.
Average price mix accelerated sequentially from the first quarter, reflecting the realization of initiatives noted in our last quarterly call, and ongoing discussions with customers regarding the need to offset persistent inflation across the business for the last several years. Commercial vehicle Q2 net sales increased 4.5% before FX headwinds of 2.6%. This growth reflects continued solid global vehicle markets as well as non truck sale markets such as bus, rail and recreational vehicles. Global forecast updates for heavy duty truck production remained steady for 2019 despite more moderate order rates seen in North America heavy truck this past spring. As backlogs remain elevated in the region.
Transportation Coatings generated a Q2 adjusted EBIT of 40,000,000 versus $38,000,000 in second quarter of 2018 and associated margins of 10.1% in Q2 compared to 9% in the year ago period. The margin uptick included the benefit productivity benefits, offset in large part by volume declines and ongoing input cost inflation. Turning to Slide 7, 2nd quarter free cash flow totaled $104,000,000 versus $107,000,000 in the second quarter of 2018. The similar free cash flow outcome was driven by moderately greater working capital uses in the current period, offset by lower capital expenditures compared to the second quarter 2018, which are largely timing related. We ended the quarter with cash and cash equivalents of 577,000,000 and a net debt balance of $3,300,000,000 versus $3,400,000,000 at March 31st end.
Our net leverage ratio at quarter end was 3.5 times compared to 3.6 times at March 31, primarily reflecting a $76,000,000 higher cash balance due to sequentially improved working capital performance and after deploying an additional $40,000,000 for share repurchases in the quarter. Turning to Slide 8, we're updating our financial guidance for 2019. For net sales, ex FX, we now assume no growth overall, which incorporates our updated view on volume development from the end markets as we have noted. Particularly impacted by lower light vehicle builds, but also reduced industrial global production demands. For reported net sales, we expect to be around 2% lower year over year, including an approximate 2% FX headwinds versus approximately 1% to 2% in our prior assumption.
We have updated our original guidance range for adjusted EBITDA from $950,000,000 to 1,000,000,000 to a range of $950,000,000 to $975,000,000, reflecting continued volume headwinds, particularly in light vehicle as well as FX headwinds of approximately 2% to net sales and around $20,000,000 at the adjusted EBITDA level. For adjusted EBIT and adjusted EPS, we continue to assume low single digit variable cost inflation at the cost of goods sold level and broadly similar sequential guidance constructs, but we anticipate some incremental cost reduction as well as price mix benefits as well as incremental stock based compensation forfeiture benefits, which collectively offset the lower top line assumptions. D and A is also about $10,000,000 lower, principally due to FX translational impacts. Other line items remain consistent as you can see that the incorporation of lower share count from our buybacks in the first half contribute approximately $0.02 per share, which are reflected in the adjusted EPS guidance. For quarterly phasing of results, we expect Third And Fourth quarter profit based on the midpoint of our adjusted EBIT guidance range to approximate 25% and 26%, respectively, of the full year total.
This concludes our prepared remarks. We will now be pleased to answer any questions.
At this time, we'll be conducting a question and A confirmation For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star key. One moment, please, while we pull for questions. Our first question comes from the line of Paretosh Misra with Berenberg. Please proceed with your question.
Can you elaborate on the 3.6 percent price mix contribution in the light vehicles business? I'm actually curious about the mix part, like how rate is the mix component within this 3.6? And what's driving that and is that sustainable?
Good morning, Peritosh, and thanks for your question. In terms of the price achievement, price mix achievement of 3.6%. In the quarter. The majority of that is, is priced and only a small amount of that is mix.
Got it. And maybe just as a follow-up on the Refinish business, what can you elaborate a bit more about the what are the volume trends that you're seeing. It sounds like you saw some weakness in North America and emerging market. Do you expect that to continue?
Well, I think as your question points out, when we think about refinish, we have to look at it as a global market and actually our largest market for refinish is actually, is actually in Europe. And as far as growth markets goes, go our emerging markets our largest potential growth area as we move forward. Specifically, if we talk about North America, the volume trends that we've seen there as we've explained in prior calls is predominantly driven by the shift from solventborne to waterborne coatings. As well as the growth that we see on average more efficient than average shops that are not owned by MSOs. And therefore, that they use slightly less paint from a volumetric perspective.
So as we continue to innovate both in terms of the productivity of the product as well as the services that we provide, we capture what is given up there on a volumetric perspective and pricemix. And then the 3rd element has to do with behavior we see in the distribution channel. And as we've highlighted previously, distribution in terms of lowering their cost structure, both at an operating level as well as a working capital level is a trend that we have seen continue in the industry given consolidation as well as distributors desire to increase their margins.
Got it. Thanks and good luck with everything.
Thank you, Veritosh.
Our next question comes from the line of Christopher Parkinson with Credit Suisse. Please proceed with your question.
Thank you. This is Harris Fine on for Chris. I'm just curious how should we be thinking about the need for you to implement additional pricing? Specifically in Transportation Coatings versus just letting this price increase that you had in 2Q roll through the next few quarters?
If we look at the what's happened over the last over the last couple of years in terms of refinish, margins have been negatively impacted by fairly dramatic raw material inflation at a period in time when prices did not go up very much in the overall in the overall market We're now seeing traction in terms of having those conversations with our light vehicle customers in terms of price increases. And we've had several of those discussions come to fruition and be realized, actually in the first quarter, although it wasn't an impact of a full quarter. So you see a pickup in the first quarter of what's going on in the second quarter. And in addition, what you also see in light vehicle is just the ongoing impact of several other changes that we've made in terms of moving more customers to be on an index. As well as other surcharge mechanisms.
So the progress that we've seen there in the second quarter is not a it's not a one time event. We would expect to that on an ongoing ongoing basis, but perhaps not at exactly the same level. Specifically, with regard to 2nd quarter, it's approximately roughly half price and roughly half mix effect in the second quarter for light vehicle.
Got it. And just as a follow-up, in terms of the destocking that you saw in refinish, during the quarter. Could you just point us any indicators that give you confidence that that doesn't represent any deceleration in demand from declining frequency and that it is just destocking?
Given our close relationship with the end customers at the body shop level, we have a very good feel for what's going on in the repair shops. And what we can see there is the amount of activity at the repair shop level as well as as well as just the size of the and growth of the car park and accident rates give us confidence that the end market is actually continuing to perform as we had originally expected. And what you're just really seeing is the continued push by distribution to become more efficient.
Got it. Thank you.
Our next question comes from the line of Ghansham Panjali with Baird. Please proceed with your question.
Hey guys, good morning. I guess, first off, going back to auto refinish, and sort of looking back to the last couple of years. Have volumes, Robert, for the industry played out the way you thought they would across your major regions? Sort of separating out some of the unique destocking elements that you've been impacted with. And then going forward, what do you think is reasonable for industry volume specific to refinish on an ongoing basis across your major regions.
Ghansham, as we look at that, I think the important thing to remember is that when you look at the Refinish business, you really need to look at it at a net sales level just structurally as the business operates. And in your customer base, you're trying to push towards higher and higher productivity coating systems. So whether you're in Europe or whether you're in Southeast Asia or North America, everybody is under pressure to become more efficient. So if you look at just volume trends, I think we'll be missing a very important part of part of the story. You really have to look at overall sales.
And I think compared to our expectations, we've actually seen at a net sales level the overall end market growth that we would have expected. And I think we'll continue to see that growth In particular, in emerging markets, as you see, the car parks and increasing grow and increasing penetration of the middle class and growth of the middle class in those emerging markets.
Understood. And so as you disaggregate that comment on Nate's net sales, how much do you think price, how much do you think mix has impacted that component, as you kind of think about volume mix? And so on the evolution of higher productive coatings, etcetera, what do you think the mix component is if you disagree with that?
Well, we've certainly seen an increase in waterborne coatings. Much of that in developed markets is really driven by just the natural evolution of the market. And then you have some markets where it's more regulatory driven such as China. And then you're seeing other other country really push on the environmental regulatory side of the equation. So therefore, we think that there's going to continue to be a push towards waterborne.
But waterborne isn't the right solution necessarily for every situation and every body shop. So we do have a high solids, low VOC solvent borne product, the leading product in that category in the industry. That has also experienced strong growth. So I think overall, we would expect to see the Refinish industry grow globally and each market. And then we also expect to see some of those shifts that we had talked about in terms of more solventborne or less solventborne to more waterborne.
And then even in some jurisdictions that are predominantly solventborne, an increase in the use of
strategic review, but during this period, how should we sort of think about capital allocation as it relates to free cash flow generation for 2019? Thanks so much.
I think nothing really changes as far as capital priorities. I think we remain focused on our M and A efforts. I think we're going to continue to drive the internal inorganic projects, those high return projects that we've continued to voice over. And we'll continue to look at opportunistic share buyback. And to the extent, we're not looking something
M and
A perspective, we'll continue to build cash on the balance sheet heading towards our net leverage target of 2.5 times. So that's kind of how we think about capital priorities today, regardless of the Teject review.
Thank you very much.
Our next question comes from the line of
when you think, I think I heard you say that your guidance for the second half is 25% 3rd quarter, 26% of the outlook fourth quarter. So you'll you'll you'll have an acceleration into the fourth quarter. Can you maybe talk about some of the drivers of why the The 4th quarter is gonna be stronger than the 3rd quarter.
We do see raw materials moderating as we get into the back half of the year. So that's one big contributor And then from an FX perspective, we also see a little bit of strengthening. And last thing and not as notable, we do see our comps from an LV perspective improving slightly in the fourth quarter.
And the last component, Mike, would be the usual process of accumulating cost savings through the year, which usually are most impactful and helpful in the fourth quarter. Got it. And then just a quick one commercial vehicle. It's been, sounds like it's continues to to see good growth for you guys. Anything in particular, driving that, the new products, market share gains, just kinda your, your, your thoughts on that segment.
Yes, the big driver is just the Americas heavy duty truck market continues to do extremely well and given our market penetration there, we're benefiting from that.
Great. Thank you.
Our next question comes from the line of David Begleiter with Deutsche Bank. Please proceed with your question.
Hi. This is David calling here for David. I guess first has Ross deflating the second half Where are you at risk for pricing pressure? And I guess can light vehicle sustain pricing environment of weak end market demand and low raw materials?
Yes, I think could you
repeat your question? I'm sorry, you came through quite softly. We got part of your question, but not all of it.
I guess as you think about 2nd half, you also are expected to deflate, where are you at risk for pricing pressure And when you think about light vehicle, can light vehicle sustain price in an environment of weak macro demand and lower raw materials environment?
I think as we look at our markets, We do see raw material headwinds easing throughout the second half of the year based on purchases that we've made up till now. So barring barring a shock here and a big uptick in the third quarter in terms of what we're buying that would flow through, in the fourth quarter. There's still are headwinds. It's just that they're it's just that they're lower. So we still have year over year inflation And as such, I think our customer base understands our need to recoup that inflation.
And with regard to light vehicle, The gap in price in price capture to offset the raw material inflation that has occurred there over the last really two and a half years now, 2 years is quite substantial. And so while there's been good progress on price increase there, to offset those costs, there still needs to be more to offset more of the margin decrement that's occurred over the last few years.
Thanks. And then how do you think about your 2020 EBITDA relative to your 2019 expectation?
At this point, we haven't provided any guidance on 2020, our regular cadence is to do that towards the end of the year. So, you can expect that towards the end 2019.
Our next question comes from the line of P. J. Juvekar with Citi. Please proceed with your question.
Hi. Good morning. This is Eric Petrie on for PJ. China auto sales for a week in the quarter, but do you buy the view that auto dealer inventories in China have declined and are now back to normal? And then what is your order book looking like?
Yes. So we don't typically carry an order book are certainly one that we discussed in automotive. That's a relative just in time delivery business and automotive manufacturers will carry generally a couple of weeks inventory that we're consistently replenishing. So our visibility into that, short term is about 2 weeks certainly discuss with our customers what their plans are longer term. We are aware that inventories in China are now quite low, which should be or at least could be helpful.
The outlook for demand there, but we remain relatively cautious in terms of our guidance construct with regard to any acceleration of the China market at this point.
Thank you. And secondly, could you talk a little bit about the industrial end market demand and which you saw that did well or better, or worse in the regions, especially in the noted strength in Asia Pacific?
I think as others have as others have seen in the broader industrials as well as as well as in coatings, in the second quarter, we did see a softening in demand. And for us, we've been experiencing an outsized growth in that end market for a while. We did see some market softening in the second quarter. As we go through our markets, not too dissimilar from perhaps what others have commented in the wood business, residential starts and remodels in the market were down about 5%. Fortunately, we've been able through new products, new customer gains and price increase to offset a large portion of that.
In the coil business, we have been impacted by lower demand in construction and agriculture and also lower steel imports have also dampened demands. So they're somewhat. However, We do have a number of new products that have been launched in that market segment and more throughout the course years. I think we're also fairly optimistic about our position within the coil market. Our Energy Solutions business, what we see there is volumes down kind of low single digits, but price mix up mid single digits.
We have strength in China, given the growth in that market there. And that's been offsetting the softer demand that we see in Europe. And then in our powder business, volumes have been flatter through the second quarter, but we have had pricemix up in that business. So the global price increases that we've had there and some of the new business gains have really enabled us to offset some of the slowness that we saw in North America and EMEA and China is also a market that in the second quarter performed well for us.
Great. Thank you.
Our next question comes from the line of Aleksey Yefremov with Nomura Instinet. Please proceed with your question.
Good morning. Matt Skowronski on for Alexei. In Refinish, last quarter you touched on how you saw some sales wins in the Americas. Were these fully implemented during 2Q? And if they weren't, how should we think about that cadence in the coming quarters?
So we've had very good commercial performance, including some new business that is in the process of being converted the conversion of that business actually takes time because you go on a shop by shop basis and convert each shop over to a new paint supplier. So we expect see that benefit be relatively
small this year, but have
a much larger impact next year.
Thank you for that. And then just touching on something that you commented on earlier. In terms of raw materials, mentioned you're pretty far along closing the gap in light vehicle or at least you made progress. Will that gap, with raw materials and price be completely flows by the end of the year?
No. So we're still I would say early innings as it relates to light vehicle. I'm just to correct something that was said earlier. The pricing you're actually seeing come through this quarter. It's predominantly price versus mix.
I just wanted to correct that point. But we still have a fair amount of work to do on the pricing side. And you've seen the last three quarters, we've gotten price with that accelerating this quarter, but there's still work to be done. And when you bridge over to performance, we are largely caught up on the performance side.
Thank you.
Our next question comes from the line of Laurent Babry with Exane. Please proceed with your question.
Yes, good morning all. Two questions, please. The first one on the raw material side, can you give us a bit of an indication on what kind of pressure or where are you seeing steel pressure? Into the second half on HDIs and things like that? And then the second question on the strategic review, I appreciate that you don't want speculate on the outcome, but I was wondering if you could share anything on the process itself, for instance, have you hired consultants you and are you sharing, info with them on your business?
And are you asking them to look at what you could improve on your business itself? Or are you mostly doing it yourselves? And getting in bankers to think about the M and A outcomes? Thank you.
Laurent, on your second question, we won't be commenting on any of the details of the strategic review at this time. I think what we've said publicly is pretty much all we're going to say about that for now. On your first question, in looking at the raw material basket, a little color by category. I think for Q3 at least, we see resin prices finally starting to be flat, which is an improvement over our earlier expectation of slight inflation. In isocyanates, we do continue to see price pressure there and expect them to be up year over year third quarter to 3rd quarter solvents, we expect to be for the most part for the most part flat in the third quarter.
Monomers as a category, we do see due to some supply tightness there. We do continue to expect prices to be up pigments as is usually the case kind of up And then on the additive side, we are seeing some relief there in the additive category with prices flattening out, at least for the moment, In particular, the entire basket and the overall categories just reflective of where oil price, oil prices spend. So again, still headwind overall for us, but a lessening headwind compared to prior quarters.
And just to add 2 other notables that we've noted in prior quarters, We're still assuming about $13,000,000 in headwinds as it relates to tariffs. And you'll recall with oil really spiking in October of last year before we started to see the change. We were sitting on some high dollar inventory at the end of 2018 that that largely turned in the first quarter of 2019.
Our next question comes from the line of Josh Spector with
Hey, guys. Within performance, I was wondering, could you break down the volume change year on year for the refinish versus industrial?
Yes, Josh. We haven't typically provided a bridge at that level. So we've noted the 3.5% the lower volume offset by a higher price mix for the segment. We did have some decline in volume in refinish offset by improved mid single digit price mix. And likewise, some decline in volume and industrial offset very well by price mix as well.
Okay. And then on performance, I guess when I look at what you did from an EBIT standpoint in the quarter, I look at prior years, typically quarter on quarter into the September quarter is around maybe a $10,000,000 decline sequentially. If I look at the guide that you have today, there's maybe closer to a 15,000,000 dollars, $20,000,000 decline. And I guess I think with some of the mix efforts and maybe a little bit of price benefit that it might have been more like a normal decline into the quarter. I'm curious what would be potentially driving that higher sequential decline versus what we typically see?
It's challenging to look at it on that basis in part because prior years had a lot of moving parts, notably including the distributor destocking that occurred in 2017 and there was some correction for that in 2018 and the development of price mix in the segment over the last couple of years So doing that particular type of analysis is a little bit challenging. So I'd prefer you think about it in terms of the the current year dynamics predominantly, but you are correct that it is normal and typically seasonal to see a little bit of a step down 2Q to 3Q.
Our next question comes from the line of Lawrence Alexander with Jefferies. Please proceed with your question.
Hi, everyone. This is Dan Rizzo on for Laurence. How are you?
Hey, Dan.
Hey, if we think about how shifting we finished customers to the coating systems to the higher margin according systems. How does that process work? Is it, I mean, what's the length of it? Is it kind of involved or is it something that they accept? Or do you have to do a lot of like teach ins?
It varies. If someone is switching from waterborne to solventborne, there is an investment that's required in the paint booths. There's also training that's required of painters because the paint actually sprays actually sprays differently. So if your question is kind of waterborne to solventborne, it's a fair amount of training and really kind of there's got to be a certain amount of throughput or there's a breakeven level where it makes sense for a shop to be solventborne or to be waterborne just based on the overall economics and outlook of the shop. Now if you're talking about switching from one competitor's paint system to another competitor's paint paint system, even if they're both waterborne or even if they're both solventborne, they spray differently.
So there's also education and training that's required in that scenario.
So it takes a number of months to years to kind of do the switchover. How does it work?
A switchover of a body shop can be done in a weekend. The training and getting people up to an acceptable level of performance can take a few months. But again, it's largely a function of the quality of the the quality of the painters. If you have painters that have been in the business for a while and highly skilled, the process moves quite quickly. If you're in a shop where you've had a lot of pain or turnover, the process might may take longer.
Okay. And then just one of the questions. And then we think about auto OEM trends and what we're seeing in light vehicle, do you have any initial thoughts on Q4 and is there any likelihood of an extended winter shutdowns potentially for your customers?
As we think about our updated guidance and kind of going back to the January guide, we started off the year expecting to be slightly up. At the end of the first quarter, IHS was showing down 0.9% and now we're down at 3.7% based on what was recently published. So we're not expecting any sort of acceleration. I think as you look at our new top line guidance, it's now reflecting further volume declines. Following largely the IHS guidance.
Our next question comes from the line of Jeff Zekauskas with JP Morgan. Please proceed with your question.
Good morning, Mr. Silke from Jeff. How are you?
Good morning, Silke.
When you look at the restructuring announcement by the, by the large auto OEM customers in terms of geographic, trimming down of like a footprint in manufacturing. How do you think that might touch your business? And is that something that would be something that you'll feel like in 2020 or something that's like a longer time issue, would you think that's something that you'll feel this year?
Okay, it's Chris. There's actually been a series of announcements in different parts of the world. Probably the easiest way to answer that is that there is actually some impact in 2019 from announcements that were made last year. Including in North America and a little bit in Europe, there's probably still some incremental impact that could occur in 20 from announcements that have occurred this year. In some cases, we are not affected.
So it really is plant by plant. When I looked at it in detail, I was relatively pleased at the direct impact to us relative to what I had essentially first feared when I read those announcements. So overall, while we can't completely duck the reality, of some plant shutdowns globally. I would say that the impact to Axalta is moderate.
Okay.
2nd, I was wondering whether you can speak about your cash flows, that is like the free cash flow is sort of like $30,000,000 for the 1st 6 months. How do you think you'll get to your target for full year end? And like what working capital changes do you expect to fix those numbers?
Yes. I mean, we continue to drive working capital improvement. I mean, year to date, we're fairly happy on where we're tracking against the full year guide. But as you bridge June to December, the big areas of opportunity that we're driving towards are accounts receivable and inventory. AR just by a function of seasonality.
That typically comes in, but we expect that to tighten even more compared to the prior year. But we're on track to hit the guidance on why we're reconfirming the outlook that we provided last April.
So you think you'll go from like 30 to 4.75 by year end?
So we're reconfirming the range of 4.30 to 4.70.
Okay.
For our
free cash flow.
Okay. And the last question I have is this, I was wondering whether you can talk about like the the timing of the announcement of the strategic review, like what prompted it and why now?
So Silke, yeah, we've been asked quite a bit, as you can imagine, during the second quarter about that. And essentially, all we can say is that the board made that announcement, June 2019, and we haven't added anything specific to the context around that timing.
Thanks, okay.
Our next question comes from the line of Vincent Andrews with Morgan Stanley. Please proceed with your question.
Hi guys. This is actually Steve on for Vincent. I just had maybe a question on the macro level. Looks like you guys cut your IP assumption from like 2.1to1.5, but your sales guidance is coming down quite a bit more. So maybe if you could just bridge the Delta and those 2, those 2 revisions, that would be helpful.
Can you clarify the 2.1 referring to what?
Industrial production, your assumption there.
Oh, okay.
Yeah, I mean, essentially you have an effect both on industrial and light vehicle from that reduced industrial production guidance, which is some of the underlying driver behind the outlook for those businesses. But maybe jump in if we miss anything in your question.
Yes. I mean, the biggest change, so we did provide the macros in the deck, but the biggest change for the top line guide is really volumes within light vehicle. Following IHS. We are seeing some headwinds as far as industrial, but the broad change relates to the light vehicle.
Okay. That's helpful. Thank you.
Our next question comes from the line of Steve Byrne with Bank of America Merrill Lynch.
Hi guys. This is actually Luke Washer on for Steve. I wanted to touch back on the inventory destocking in your Refinish business. Where do you think the distributors are in the stocking process? And do you expect this to continue in the back half of twenty nineteen and kind of into 2020?
It's difficult to say. I think the distributors overall are, as we said before, looking to become more efficient both in their operating cost structure as well as in the amount of working capital and where they are at exactly on their process is something that I think you'd have to you'd have to ask them. But I think at the end market, the end market level, again, we're seeing strong we're seeing strong growth and overall globally, we had good price, I'm sorry, we had good overall overall growth at 3.6%. And I think again, it's important that everybody not lose sight of the fact that, we're in a global refinish market. And within that market, Europe is actually our largest market in North America is our 2nd largest market, the area of the most amount of growth over the next 5 to 10 years will be Asia and emerging markets.
So I think it's just important to keep that, that full picture in context
Sure. That's helpful. And last question, you guys did quite well on the margins for your Performance Coatings, 300 bps Could you maybe break out a little bit more on how much of that was driven by the price mix versus actual price increases and maybe productivity enhancements?
Yes. So on price mix, generally speaking, it was about fiftyfifty as far as actual price versus mix. We don't actually quantify productivity. By end market, but we are continuing to see the benefits of Axalta Way. And you see that dropping through to margin.
Great. Thank you very much
Ladies and gentlemen, we have reached the end
Thank you. I just wanted to highlight that the second quarter was a very strong quarter for us. We executed extremely well. We achieved 4% pricemix overall and that includes price realization in both segments and across all four regions. And in particular, our efforts to offset raw material inflation with price increases in light vehicle showed through clearly in the quarter with price mix of a positive 3.6%.
We're also seeing raw material inflation headwinds finally starting to ease somewhat. So the higher pricing, the lower raw material inflation and the continued strong contribution from our Axalta Way cost reduction program is having a great impact on our profitability and our margins. The adjusted EBIT itself increased 9% year over year and our adjusted EBIT margin expanded by 210 basis points. So if you flow that through to net income, net income also increased by 9% year over year and our adjusted earnings per share increased 13%, which was further aided by our share buyback. Although industrial demand and light vehicle builds are to be lower in Q3 and Q4, we believe that the strong performance of our refinish and commercial vehicle businesses our price increases, the easing of raw material inflation and our cost reduction programs will position us well to hit our full year profitability goals.
So just wanted to provide that overall summary and perspective on the second quarter here. And thank you very much for joining us today. And we look forward to updating you again on our progress in October.
This concludes today's conference. You may disconnect your lines at this time. Thank you for your participation.