Caterpillar Inc. (CAT)
NYSE: CAT · Real-Time Price · USD
687.00
-17.05 (-2.42%)
At close: Oct 23, 2026, 4:00 PM EDT
686.40
-0.60 (-0.09%)
After-hours: Oct 23, 2026, 7:59 PM EDT
← View all transcripts

Earnings Call: Q3 2016

Oct 25, 2016

Summary

Q3 revenue fell $1.8B YoY and EPS was $0.48, while cost reductions reached $1.8B through 9M. FY16 guidance was cut; 2017 was expected to be broadly flat, with a weak first half and potential second-half improvement tied to demand and orders.

Good morning, ladies and gentlemen, and welcome to the Caterpillar Third Quarter 2016 Results Conference Call. At this time, all participants have been placed on a listen-only mode, and we will open the floor for your questions and comments after the presentation. It is now my pleasure to turn the floor over to your host, Mike DeWalt. Sir, the floor is yours. Thank you very much, Paul, and good morning everyone on the call. I'm Mike DeWalt, Caterpillar's Vice President of Financial Services. On the call with me this morning, we have Doug Oberhelman, our Chairman and CEO. We have Jim Umpleby, who will be taking over the reins from Doug as CEO come January. Brad Halverson, our Group President and CFO. Yeah, good morning, everybody. It's Doug Oberhelman here, and I just want to make a few opening comments and we'll get back to Mike and normal conference call stuff. I want to talk a little bit about the succession planning process the board used, just make a few comments on that. We have a, and we've talked about this before in analyst conferences and so on, but we have a very robust succession planning process that goes all the way down to almost the first levels of management. We review and spend a lot of time on that every year. Every year, at least once, usually in October, we go through that with the board for say the top 300, top 350 people and talk about succession, the future, some names. During the year, we try to introduce the board to a lot of those names and individuals as we have been doing. I certainly have been active in that. I was very adamant that I wanted when my time was up, and I'll be 64 in February. When I retire at the end of March, I will be 64 years old with just a few months to go before I'm 65. Pretty much right on the process. There's no drama here, contrary to a lot of the stuff that's going around. But I was adamant with the board that I wanted a very good, sound process to use. That they were happy with it, our executive office team was happy with it at the end. All the executive officers then would go right on through performance and not miss a beat. I think we've achieved that. I picked the timing. I have been very much supportive of Jim. I am very much supportive of the full executive office. As we announced a week ago yesterday, I will be CEO until the end of December, and I will be Executive Chairman until the end of March. We did make a change in governance with a split chair and CEO role. I think most of you know we have had a shareholder proposal on that for several years in a row. We have a couple of large shareholders that are fundamentally for that. They push that at transition times, and obviously this was a time the board considered that because we were in transition. Dave Calhoun will be the Executive Chairman come April 1. I will tell you that I have had a wonderful relationship and extensive and also frequent with the current Presiding Director, Ed Rust. We talk frequently before, during, and after every single board meeting and have for years since I have been in the job. David's role will not be anything different to Jim. Jim will run the company, and David will coordinate the board as Executive Chair. Just a change in governance. Both work very well. I have had great luck with the Presiding Director situation, and I am sure Jim and Dave will have great luck with the split chair CEO role as well. Again, no drama, just a different way of doing things. I think we will carry on and not even miss a beat. With that little preamble, I will tell you, I am excited to move into the next phase. I am very excited for Jim and the executive team that we have here. I feel the company is positioned. We have been through an awful, rough period the last four years, as all of you have known and endured. I do think we are set up for the future. Mike, if you would take over. Actually, Jim. Sure. I'm sorry, Jim. I meant to introduce Jim Umpleby officially, and Jim, if you have a couple comments, that would be great. Thank you. Sorry. Thanks, Doug, and hello again to everyone on the line. It is an honor and privilege to be selected as the next CEO of Caterpillar. I have worked with Doug for many years. I have great respect for him and am proud to be part of this team that has kept Caterpillar strong throughout some of the most difficult market conditions that we have faced. Like other incoming CEOs, I will pull together a team of leaders that will refresh our enterprise strategy in the coming months. Again, it is an honor to have been chosen to lead this great company. Thank you. Mike, back to you. All right. Let us get onto the quarter and the outlook. Today, we will be walking through a short slide deck similar to what we have done for the past few quarters, and then we will move on to the Q&A. Now would be a great time, if you do not have that slide deck in front of you can pick it up on our caterpillar.com website, where the conference call webcast link was. Just as a reminder, this call is copyrighted by Caterpillar Inc., and any use, recording, or transmission of any portion of the call without the consent of Caterpillar is strictly prohibited. If you would like a copy of today's call transcript, we will be posting it in the investor section of that same caterpillar.com website, and it will be in a section labeled Results Webcast. If you go to page 2 on this morning's slide deck, you will see our forward-looking statements, and I am quite certain that this morning we are going to be discussing quite a bit of forward-looking information, and that always involves risks and uncertainties and assumptions that could cause our actual results to differ materially from the forward-looking information. In addition to page 2 of the slide deck, a discussion of some of those factors that either individually or in the aggregate could make results differ, can be found in our cautionary statements under Item 1A, which is risk factors from our Form 10-K filed with the SEC earlier this year, and in the forward-looking statements language in today's release. Now, in addition, a reconciliation of non-GAAP measures that are used in both our financial release and this presentation can be found in both the financial release and the last page of the slide deck. One more thing, actually, before we get started on the slide deck, I know that with Doug's announced retirement, with Jim replacing him, I suspect you have a lot of questions for Jim about his long-term strategy. But I would say since Jim found out he's going to be CEO just about 10 days ago, now is probably not the best time for those kind of questions. So what we're going to ask is today, we're going to try and keep the call here to our third quarter results, the outlook for the fourth quarter, and kind of our preliminary view of sales for next year. With that, let's start on the slide deck, and if you could flip to page 4. On page 4, that's a high-level summary of what happened in the third quarter to sales and revenues, and profit. We were down $1.8 billion in the quarter, kind of continued on the same trajectory we've been most of the year. Profit per share dropped from $0.94 per share last year in the third quarter to $0.48 this quarter. Quite a bit of that was from more restructuring costs. Certainly in the quarter, we had additional asset impairments related to our Resource Industries business, and restructuring costs were $226 million higher than a year ago. If you exclude the restructuring cost, profit per share was down $0.20, which I think is pretty good performance on a $1.8 billion drop in sales. That'll be a theme, I think, across the next few slides that we talk about. Cost reduction was very good. If we go to the next page, it'll kind of walk us through the change in sales in a little bit more detail. The most significant decline was in Energy & Transportation. We were down a little over $800 million. In Transportation, in fact, this is I think the first time all year we've said that oil and gas was not the most significant reason. But this quarter it was Transportation, followed by Power Gen, Oil & Gas, and Industrial Engines. Resource Industries was down $465 million. That's a little over 25%, and it's been kind of down about in that range every quarter this year, so not a big change. It's actually split between mining products and large construction. We don't talk much about construction in Resource Industries, but we have large products like articulated trucks, some of the smaller off-highway trucks, some of the large bulldozers, some of the large wheel loaders are used in construction. A pretty good decline this quarter in Resource Industries was from construction equipment. We're seeing quite a bit of that in North America. For the Construction Industry segment, we were down $521 million. Again, about two-thirds of that was volume. North America was the most significant region, and about a third of that was price. The total decline then is $1.8 billion. Let's maybe flip to the next slide, page 6, talk a little bit about profit. This is our normal waterfall chart. On the left, the black bar is the third quarter operating profit from a year ago. Then we're isolating what caused changes. You can see, without a doubt, that $1.8 billion decline in sales and revenues drove a substantial impact on profit from lower volume. Price realization has remained a pretty decent sized negative, about the same as versus a year ago as last quarter. It was $213 million this quarter. The next two bars are the positives. Variable manufacturing costs. That's cost absorption, that's material cost, that's variable labor and overhead in our factories, and that's been positive for all year. Period costs. We've done a lot of work to take structural costs out of the company, and we've actually performed very well on this all year long. Then a couple bars to the right is the restructuring cost. If you look at the decline in operating profit, about half of the decline was from the restructuring cost. Excluding restructuring costs, on the prior page, you saw we were down $0.20. It's a little over $200 million in operating profit. If you look at that price realization bucket, had we not been in such a difficult pricing environment this quarter, we would have had enough variable and period cost reduction to essentially offset the impact of $1.8 billion in lower sales. Now I'm going to ask you to do something I wouldn't normally do at this time. Let's just back up, given that good cost performance. Let's back up to the previous page one more time. When we look at Energy & Transportation, their sales were down $818 million, but their profit on that level of sales decline was only off $111 million. I think that indicates great cost performance. Construction Industries, $521 million decline in sales and revenues, and 165 of that was price realization. Despite that, the profit was only down $28 million. Resource Industries, mining, and large construction, down $465 million in sales, but their profit was down only $35 million. I think that when you look at the change in profit in the context with the change in sales, it just reinforces the point that I made a minute ago, that cost reduction has been very good so far this year. If we move on to page 7 and look at where we've been on cost reduction this year. You can see through the first 9 months of the year, we're favorable, about $1.8 billion. That breaks down into three major categories. The first is restructuring efforts. We've been on that path for a few years. We announced a fairly big series of restructuring actions last September. With all those actions, we've reduced square footage, capacity, and people. Material cost has been favorable this year. I know it's tempting to always think about that as just commodity-based, but the fact of the matter is we've gotten more cost reduction from design and sourcing related changes than we have from commodity prices. Then there's everything else, and that includes short-term incentive pay. A little over $300 million of the $1.8 billion is from lower incentive pay this year, at least for our expectations. Even without that, we're $1.5 billion of lower cost this year. That's a little bit about the third quarter. Again, a tough sales environment, very good progress on cost reduction across the board. Let's look at the outlook. We did lower the 2016 outlook. Previously, we were thinking $40 billion-$40.5 billion for the year, and $2.75 profit per share, $3.55 without restructuring costs. We have lowered that. We think sales and revenues are going to be about $39 billion this year, and profit will be $2.35 a share or $3.25 excluding restructuring costs. Sales came down. So at the midpoint of the outlook, that is about $1.25 billion decline in sales. That came out relatively evenly across construction industries, resource industries, and energy and transportation. The decline for construction is particularly in North America. The weakness in North American construction has impacted both our construction industry segment and to some degree, resource industries for large equipment. I think that is one of the bigger reasons for the decline in the outlook. In energy and transportation, we also took down rail. We had some business that we thought was going to ship in the second half, and it has been pushed out to later years. We have also had some decline in oil and gas, and that is mostly from service and overhaul work related to Solar. You always have a lot of questions about Solar. We were thinking Solar was going to be down about 10% this year. It looks like based on where we are at now, it will be closer to 15%, and most of that change is related to service and overhaul work, not new turbine sales. Power generation has also been down. It has been particularly weak in oil-producing regions. From a profit standpoint, our restructuring costs are about $100 million higher that we expect for the year, and most of that was from the additional asset write-offs that we had in resource industries in the third quarter. We do not normally give quarterly guidance, but when we get to this point in the year, we have three quarters of actual, and we have a full year forecast, so it is pretty easy to figure out what we are thinking about the fourth quarter. Based on this outlook, it implies about $10 billion of sales and revenues, $0.47 a share profit, and $0.67 excluding restructuring. If we move to the next page 9, I will kind of walk you through why on higher sales we think profit in the fourth quarter is going to be a bit lower. If you look at the third quarter and the implied fourth quarter outlook, we have sales and revenues up about $800 million. Most all of that is in energy and transportation. We always have some seasonality in our fourth quarter sales, so this is probably not a surprise to you. We also have more locomotive shipments in the fourth quarter, particularly Tier 4 locomotives, and we have some large turnkey power generation projects in the fourth quarter. Profit on that higher sales, excluding the restructuring costs, we think will be about $0.18 lower. Of course, one positive is higher volume. We do have a substantial offset of the higher volume on sales mix. This is also not, I do not think, very unusual. Over the last couple of years, that has been the case for us, and we have had lower margins in the fourth quarter, and they have tended to rebound then in the first quarter, and we think that is likely the case here as well. Cost absorption, one of the things that also happens commonly with us, and it's partly related to the higher sales. We have usually a pretty good sized inventory reduction in the fourth quarter. We're expecting that again this year, and that, we think, will result in negative cost absorption. We had in the third quarter, because we lowered the outlook, we had a favorable year-to-date adjustment in the third quarter for incentive compensation. We certainly don't expect that to repeat in the fourth quarter, so third to fourth is going to be negative for that. Another item that we talk about quite a bit in the fourth quarter is a bit of seasonally higher costs at year-end, and we don't have any reason to believe this year will be any different than prior years. We expect a little bit of a cost increase in the fourth quarter. That's a little bit about the fourth quarter. Now let's talk about 2017, and that's page 10. We usually provide a preliminary view of next year in our third quarter release, and so we're doing that again this year. It's always difficult at this time of the year to predict that. The year doesn't even start for a couple more months. But at this point in time, on balance, we're not expecting 2017 to be significantly different than 2016. That doesn't mean that it couldn't be different. That just means at this point in time, it's a little hard to predict. We tried to give you some insight into our thinking here by providing a list of the positives and a list of the things that we're concerned about. On the very first bullet, you'll see they're kind of the same thing, and that's commodity prices. On the plus side, commodity prices have improved from earlier this year, and with oil, for example, it seemed to stabilize somewhere around $50. Certainly compared with where we were, that's good. That's a positive signal. On the concern side of that, we don't think commodity prices are still quite good enough to drive substantial sales increases next year. We would like to see commodity prices rise more next year. If that happens, that, we think, logically, would be upside for the second half of next year. If that doesn't happen, probably not upside then. On the positive side, construction in China, that's been generally positive this year. Both our market position, we're doing a bit better than most of our competitors, and the market there has improved, and that's been good for us. If you look at today's release, for example, the one up sales increase that we have in our release is in construction in Asia. If memory serves me, we were up about 9% there. We think as long as there's continued support for growth in China, that next year can be up as well. Construction sales in some other developing countries, particularly in places like Brazil, where it's just been a very challenging situation. CIS is in that category, too. It's been a very challenging year for both. Brazil because of deep recession. Russia and actually much of the Middle East as well because of low commodity prices. We kind of think that sales in many of those countries may have bottomed, and there's every opportunity to think that in places like that, we could have some upside next year. Then around mining, this is a bit related to the commodity comments earlier. It looks to us like the CapEx forecasts are flattening out, and sentiment amongst customers and dealers has been a little bit better, and that's good. On the concern side, in addition to commodity prices, North American construction in the third quarter and in the fourth quarter is weaker than we would've thought a few months ago. If that continues, that would be concerning next year as well. Hopefully, with all the election noise behind us, particularly if we get some investment in U.S. infrastructure, that could help. But right now, I would think on balance, it looks pretty tough. Economic growth in Europe, it's been kind of okay, but we're still concerned about Brexit, and as that draws nearer, the concerns that we have are, does it impact economic growth and business confidence and investment? I think another fallout from the lower oil prices has been power gen, particularly in the oil-producing regions. It's very weak now, and we don't see anything in the short term that's going to change that around. Also kind of related to commodities in a way, marine, particularly for offshore service vessels, we're concerned about. Rail remains a very weak industry, particularly in North America. Industrial engine sales to ag customers, that's loose engine sales that we sell to ag customers, and particularly ag and some power gen packagers, remain pretty weak. I know with Solar, it's always a topic of discussion, so I thought I would give you our current view of Solar as well. So right now, we've had a pretty stable backlog. Based on where it's at right now, it would give us expectations that Solar would be about flat next year with this year. I know you're concerned about how this will play out by segment. I would tell you that it's not a lot. When we say not significantly different than 2017, by and large, that's probably pretty similar across most of the segments. I would say probably slightly more negative with E&T than, say, resource industries, which is at such a low bottom. New equipment sales in the big mining product is down 80%-90% since 2012. Not as much room there for downside. With that, we'll just wrap up with a few discussion points on page 11. Not much change over the past quarter in the industries we serve with the exception of North American construction, which is disappointed. We've had great operational performance, and that's not just cost reduction. Our market position vis-a-vis our competitors was better this quarter than a year ago for our machines and continues to improve in China. Our decrementals in every single segment were very good year-over-year. That's driven by cost reduction, which is quite substantial. We're pretty well on track with restructuring. Most of the things of any magnitude that we were considering a year ago in September with that announcement have been made public. Balance sheet remains strong. Our ME&T debt to CapEx is 37% at the end of the quarter, and we had a cash balance of over $6 billion. We are still thinking that this year will be a positive free cash flow. With that, I think we are ready to turn it over for questions. Thank you, ladies and gentlemen. The floor is now open for questions. If you have any questions or comments, please press *1 on your touch-tone phone at this time. Pressing *2 will remove you from the queue should your question be answered. Lastly, while posing your question, please pick up your handset if listening on speakerphone to provide optimum sound quality. Please hold while we poll for questions. The first question is coming from Andrew Casey. Andrew, your line is live. Please state your affiliation and pose your question. Wells Fargo Securities. Good morning, everyone. Good morning, Andy. On 2017, can you review some of the puts and takes we should consider when looking at the year in addition to the revenue outlook you provided today? Yeah. Also, given the market outlook is pretty flat, are you considering any incremental cost removal actions? Yeah. So as we said on sales, I'll start with that. On balance, we're not seeing a significant difference, but we said this in the release. I think we're much more cautious about the first half of the year. The flattest for the year relies on a bit of improvement in the second half of the year. So I think to your point on costs, I would suspect as we wrap this up, we will be planning and trying to set a cost structure for something that's probably a little bit more conservative than where we're thinking sales for the year could be. So it'll remain a very big focus on cost and cost reduction. Won't get into too many of the details yet. As you know, we're kind of in the middle of our planning process for next year right now. But I think some big things that you can certainly expect. One, we'll have a big headwind. I don't know how much yet, but we'll likely have a pretty sizable headwind on incentive compensation. This year, we're off of our outlook in most areas off of our plan. So we'll have a less than expected short-term incentive comp this year for all of our employees, and something more normal going into next year could be a headwind of $500 million-$600 million, depending upon where the executive team and the board sets the target. So that would be a headwind. On the positive side, we've done very well on costs. We've taken out more cost as we've gone along this year, so we'll have some benefits from a carryover impact of that. So that should be a tailwind. We've done very well on material costs. Again, much of the commodity benefit and material costs with the rise in commodity prices has come out. But even without commodity changes, we've done very well on sourcing and design with material costs. I think we would see that as a tailwind for next year. We're still working on all the other items in the plan, and when we get to January, we'll definitely do a more complete review of sales and the profit drivers. Okay, thanks, Mike. If I could follow up on the guidance for this year, the $3.25. I think in the past, the $3.55 included some benefit from change in pension OPEB policies. Is that still in the $3.25, and how should we view that? Sure. Yeah. in 2017? Yeah. Essentially, the change that we made had the impact of taking out prior year amortization of gains and losses related to the assets and liabilities in the pension plan and better reflects what the, I don't know, I guess I would call actual ongoing pension costs. It's not that there's a big benefit. I think it's just stated more around what the actual expense is for the year. And we made that accounting change effective the beginning of this year. The couple of prior years where we stated, and we're going to maintain certainly that accounting treatment. Okay. Thank you very much. Thanks, Andy. Thank you. The next question is coming from Sameer Rathod. Sameer, your line is live. Please state your affiliation and pose your question. Hi, good morning. Macquarie. My question's on excess capacity. It seems like rationalization, normal rationalization isn't really happening given the excess of liquidity provided by central banks. Does Cat think deflationary pressures or pricing pressure will continue in this environment, or does it somehow naturally abate, or do you think M&A is the only channel for supply rationalization? Sameer, I heard all the words you said. Is it a question on our pricing or what we think will fit? Yeah. Caterpillar's indicated excess capacity being a problem for price realization. My point is, if there's excess liquidity, zombie corporation, so to speak, not going out of business Yeah does price realization continue to deteriorate? Okay. I get it. Okay. Our pricing over the last couple of quarters, it's certainly unfavorable to a year ago, but it's stabilized from what we see going forward over the next quarter anyway. In fact, we had a Q&A in the release on this. We don't see the pricing environment actually getting worse. Saying it's not getting worse doesn't mean that it's good. Maintaining it at this level is actually a pretty significant negative to our results. It was a $200 million drag on the quarter. But we don't, at this point, see it getting worse from here. It's pretty tough overall, but barring some large event in the world economy that we're certainly not expecting, I think we would see from this point, at not very attractive levels, stable pricing. Okay. Thank you. Thank you. The next question is coming from Jamie Cook. Jamie, your line is live. Please state your affiliation and pose your question. Hi, good morning. Credit Suisse. I guess, Mike, my first question, I appreciate the color on the fourth quarter revenues as well as the EPS and why the EPS is lighter. But can you just give me a little more color? Have you changed your assumptions in terms of where dealer inventory should be at the end of the year and Cat's inventories relative to your previous guide? Because I think what everyone is trying to get a better understanding of is as we approach 2017, what's your confidence level that we should start to produce in line with retail demand given where we are today? Yeah. I guess that's my first question. Also, you mentioned a couple of times about your 2017 revenue assumption, the first half is weaker versus the second half. Back to the how we'll be producing relative to in line with retail demand. Is the second half improvement, you're assuming the markets get better, or is there some change in what would be normal seasonality in terms of production for Caterpillar? Thank you. Yeah. Predicting dealer inventory precisely is always difficult. But I think based on where we've been year to date and what's likely, I think in the fourth quarter, and this will be a plus or minus probably a couple hundred million dollars, but probably something around dealer inventory in its totality, around $1.5 billion decline this year, with probably somewhere close to half of that coming out in the fourth quarter of this year. We are not currently producing to end market demand. This year, let's say order of magnitude, $1.5 billion lower. Now, when you start talking about next year, I'll tell you what makes it really difficult to predict. How well in the year will depend a lot on how the second half of the year turns out and what expectations for 2018 are. So for example, if things start improving in the middle of next year and there is confidence that 2018 is going to be a better year, part of dealer inventory is thinking about what is going to be needed for the future, not what was needed in the past. So that would tend to help dealer inventory. If 2018 looks bad, if there is some sort of a world event and dealers are more pessimistic, there would likely be some additional dealer inventory reduction. I think we will probably be in a better position to talk about that maybe more in January. But I would say in our current estimates, we do continue to have some level of dealer inventory reduction in for next year. I guess at this point, let us just call it a placeholder, but probably not as much as this year. So in a flat environment, we will still be underproducing retail demand next year? I would say so, yeah. Okay. Is there any way you will give color? I know it is not the 1.5. Would it be considerably less than that? Can you talk about which markets they would be targeting? I guess the second question on that is why not just get it out of the way, Mike, this year versus have this be an issue into 2017? Well, we don't control dealer inventory. Dealers are independent. It's not up to us. It's up to dealers and what their confidence level is. They're the ones selling to end customers, so it's not something that we can force to be behind us. It's also very seasonal. Dealers will want to likely build some inventory in the first quarter, for the second quarter selling season. It's not as simple as you might think. Okay. Buckets on where it is. Is it just mining and construction? Well, it's been mining, construction, and some E&T, this year. It's been across all three. I think construction for the year will probably be a bit more than the other two. Okay. Thanks. I'll get back to you. Thank you. The next question is coming from Ross Gilardi. Ross, your line is live. Please state your affiliation and pose your question. Yeah, good morning. Bank of America. Thank you. Mike, I've tried this one for a few years in a row. I'm going to try it again same time of year. Cat, I believe, has got $3.6 billion in goodwill still residing in its mining segment. As you mentioned in your formal remarks, as we know, new equipment sales are down 80%-90% since you bought Bucyrus. Your annual impairment testing, I think is coming in the fourth quarter. I'm not asking if you're going to write it off, because obviously that's an auditor decision. If you did write off the $3.6 billion in goodwill, would it potentially jeopardize either the dividend due to stipulations on shareholders' equity in your borrowing agreements or negatively impact your credit rating? Well, those are big questions. I'll try to talk around it rather than giving you a direct answer because our credit rating is up to the rating agencies. First off, if we knew what the result of the fourth quarter goodwill testing would be, we'd book it. We don't. We go through a defined process every year. We're going through that now, and we're pretty straight up. If there's an impairment, we'll book it. If there's not, we won't. In terms of the effect on the company, that would entirely be a non-cash item. It would affect equity, of course. It's a totally non-cash transaction. I can't imagine that would impact the dividend. But in terms of not having it written off up until now, how could Cat say that the assumptions around what it's worth on a discounted cash flow haven't changed materially since the time you bought it and put that goodwill on your balance sheet to begin with? Well, that's a longer discussion. First, there is no Bucyrus. Bucyrus does not exist, and the goodwill is not in one measurement bucket. We measure goodwill. We do the work based on which of our business it's in, and that goodwill is spread across more than one business. Also remember that some of the goodwill was, or the intangibles in goodwill, changed after we acquired Bucyrus and sold a portion of it to dealers. So some of it left already. We, in our K last year, we provided more color on goodwill and the segment that the closest a year ago to triggering an impairment. I think if memory serves me, it was about 15% off. That segment houses about $1.2 billion of the goodwill. So we don't have a Bucyrus. Everybody wants to think we do, but it's been integrated in across a couple of different businesses within the company. So the measurement is not just Bucyrus because it doesn't exist, it's each of those businesses that we have. That's how it's done. So I don't know if we'll have an impairment or not. I'm not saying we will, I'm not saying we won't. We just have to go through the process, and we'll know in the fourth quarter. If we do, we'll book it. If we don't, we won't. All right. Thanks, Mike. Thank you. The next question is coming from David Raso. David, your line is live. Please state your affiliation and pose your question. Evercore ISI, good morning. I'm just trying to think about the cadence and confidence in the 2017 outlook. When I look at the orders, the orders are down about 10% year-over-year, and they have to grow about 5% sequentially, just so the fourth quarter orders are still down just 10%. Can you give us some color what you're seeing currently on your order trends and how to think about those numbers with that cadence for 2017 sales? Because, again, we need orders up 5% sequentially to still be down 10% year-over-year starting next year. Yeah. Dave, I think I'd have to write all this down on a piece of paper to follow what you're saying. Our backlog from second to third quarter didn't change much. I think in construction, the backlog is, in most of the products outside of maybe China, is fairly weak. I think we don't normally have a long backlog for businesses like construction. That product ships in the range of 8-15 weeks, so you don't have a long backlog. I said a minute ago, dealers are planning to cut inventory in the fourth quarter, so I think naturally they're ordering less. We would certainly expect a pickup in orders in the first quarter as they want to build some inventory for the second quarter selling season. In the case of Solar, backlog is reasonable and based on everything we know about history, should be reasonably in line with a flat year next year. How confident are we in next year's sort of preliminary view? I think we're confident that the first half will definitely be challenged, and I guess if you want to read into that down, I think that's probably a reasonable way to think of it. How confident are we that the back half of the year will improve? I think that will depend largely on what happens to the U.S. economy, U.S. construction, and whether or not this trend of maybe parts sales firming in construction happens, and whether or not we start to see orders from mining companies, which we haven't seen much of so far. We're encouraged by the commodity prices, the sentiment, the discussion on CapEx, but probably to the point that you're making, that has not turned into orders of any magnitude yet. Our confidence in the year does rely on a pickup in orders going forward. To be fair, you would need a lot of mining orders to turn that into a big positive year-over-year. So, 6 months, 9 months out is far enough out, I appreciate. It could be up in the second half nicely, but I am just trying to think what we have visibility on in that kind of 3, 6-month kind of view. The orders sequentially, and again, I am just giving you the numbers. If orders are flat sequentially, we are still down 14% year-over-year going into 2017. I am just trying to get a feel from you, are you saying your orders sequentially right now feel flattish, up or down? Just for some perspective. Yeah. I do not recall disclosing orders, so I would have to look at your math. We would have to talk about it offline. Orders are not something that we disclose, and when you look at orders, you definitely have to consider how much is aftermarket, how much is not aftermarket. The length of the order board for parts is about 2 days. The length of the order board for rail can be 2 years. So it just depends upon the product in terms of what it means for the short term. One last follow-up. The R&D, you did not mention on the year-over-year puts and takes. I would have thought the R&D, which is already running down 14% for the third quarter, was down 11% the second quarter, would be an area of cost savings for next year. Is there a reason you did not highlight it? Yeah. The reason I did not highlight it is because we are not done with the plan for next year. One of the things that we have to address between now and the time we do talk to you about profit is in places where we have discretion on timing of spending, what we are going to prioritize and what we are going to do. We are not through that yet in the planning process. That will come over the next probably 6 weeks or so. But fair to say it should be a positive. I mean, it should be down next year is a fair directional assumption? I tell you what, I am going to avoid saying that because we have not been through that sort of resource allocation discussion yet within the company. I can understand how you would think that, and that may well be the case, but before I get us positioned on that, I think we need to get through our planning process. I appreciate it. Okay. Thank you for the time. Okay. Thank you. The next question is coming from Robert Wertheimer. Robert, your line is live. Please state your affiliation and pose your question. Thank you. It's Barclays. Congratulations to Doug and Jim. Doug, we've written that the work that Cat has done under your tenure on competitive position, production systems, market share, it's going to pay off for years and decades to come. So congratulations. Yeah. Thank you, Rob. I appreciate that. This is a little bit of a low-level question, but SG&A was really low in the quarter, really good, great cost control. Obviously, the incentive comp was part of that. Even if we take incentive comp up like $100 million, like it seems to have been the first 2 quarters, you're still at $630 million, $640 million or something of very low levels. What else was abnormal in SG&A, and what is the sort of indication on sustainable run rate from the quarter? Yeah. The incentive comp was definitely an abnormal, if you will, in the quarter, a good guy. Outside of that, I'm not aware of anything in the quarter that was of any materiality, unusual or weird. There's always some discretion in some of the expense that you have, and there's always some timing issues. I'm quite confident that SG&A costs might be a bit higher in the fourth quarter because of timing. There's nothing that I'm aware of that is anything that's significantly, outside of incentive compensation, negative. Perfect. Or positive. Yeah. Would you hazard a guess on the total, I understand the work you are doing on product design, but the total raw material benefit for 2016 at this point? 2016. Honestly, I do not remember the total number, but probably a good couple of hundred million dollars, maybe. Great. Thank you. Maybe a little bit more than that, even. I am done. Thanks. Okay. The next question is coming from Joe O'Dea. Joe, your line is live. Please state your affiliation and pose your question. Good morning. It is Vertical Research. First question, just on pricing and what is embedded in early expectations for 2017. I think when we compare it to the pricing announcement from late September, which had a pretty wide range but flat to up 4%. Based on experience this quarter, just how you are thinking about pricing from an overall perspective in 2017. Yeah. That's a good question, Joe. When asked for kind of the puts and takes for next year, I was silent on price realization. On the positive side, we did put list prices up for machines in the range of some none, some as much as 4%. We don't provide any kind of a weighting on that, so it's a little tough for you to know kind of what an overall average is for that. Even that's just machines, so that wouldn't have aftermarket in it, and that's not Energy & Transportation either. I think the fact that we had a 0% to +4% range, you can look at and think of that as a bias for a little better price. The flip side of that is price realization. This year, we did not take list prices down, but we have negative price realization. The market will be what the market will be, regardless of what we put out in list price changes. I think at this point, I didn't talk about it as a headwind or a tailwind, and I think that probably describes, at this point anyway, how we're thinking about it. Got it. Then specifically on construction inventory in the dealer channel, could you give any context around historically how many months of inventory dealers have wanted to carry there and what they're carrying now, and maybe where you see that going? The point of the question really being how big an impact lean manufacturing has been for you, what kind of a comfort level it gives for dealers. There's destock related to end market, but then there's also destock on efficiency and just how much more of that we could see. Yeah. I wish we were able to break down all the reasons and causes for everything that goes on within dealer inventory. There's usually a reasonable band in terms of months of supply, and you kind of have to look at it in a band. It's not a static kind of expect. It depends a lot on, is the bias up or is the bias down on future sales? Because that'll color a lot what dealers hold. To your point, how we're shipping. Are we meeting shipping commitments? Are they relatively quick? Can they get what they want when they need it? That kind of puts a downward bias on what they want to hold as well. The flip side of that is if we're on allocation, they want to order as much as they can get, and they want to hold as much as they can keep. There's not a hard and fast rule, but somewhere in the sort of maybe three months on the low end, three and a half, is probably a reasonable band. For the most part, we're in that band. You have to even take that with a bit of a grain of salt because it depends upon what the product mix is of what's being sold. If it were all small machines that we sell, that we can provide delivery on in eight weeks, that provides a little different dealer dynamic than if it's big machines that take six months. I guess the gist of my answer would be, I don't think there's any massive excess of dealer inventory. I think we all would like to get dealer inventory down. It's just more efficient for us and dealers if we can deliver quickly what they want, what they need. In an ultimate world, wouldn't it be great if they didn't have to have any inventory and we could just ship them everything in one day? Unfortunately, that's not the case. But you're always striving to do better. That's really helpful. Thank you. Thank you. The next question is coming from Mili Pothiwala. Mili, your line is live. Please state your affiliation and pose your question. Thanks. It's Morgan Stanley. My question is on the comments you made on North American construction, particularly some of the weakness you mentioned you saw over the past quarter, call it, that's caused you to be a little more concerned on the outlook in 4Q and into next year. Can you just elaborate on where you're seeing that, and what caused you to get a little bit more concerned? Yeah. So, if you think about our business in construction, the heavy construction and rental are pretty decent-sized businesses for us. If you look at construction in North America, housing seems to be motoring on and has been okay. The problem we find ourselves in, I think, is the larger projects, the infrastructure spending is maybe not quite as robust as housing would be right now, and that's a bigger sweet spot for us. We have this other dynamic going on, and I'll try to describe it like this. We have too much used equipment in the marketplace right now, and used equipment prices are fairly depressed. So what that causes in rental, particularly with our rental channel through Cat dealers, is it does not provide much of an incentive for dealers to sell off their used equipment and refresh fleets. We're seeing our sales into the rental channel as pretty challenged right now. I talked about construction equipment in resource industries, in particular articulated trucks. We had quite a bit more rental loading earlier in the year than we've seen here in the back half of the year. So I think hopefully sentiment will improve. We'll get the election out of the way. We'll have a new government that's interested in infrastructure spending and somewhere six months to a year down the road, maybe that'll turn into something better. But right now, I think we're on the fence and concerned about overall construction in North America. Got it. Then just as a quick follow-up, I think in the past, you've talked about for 4Q within resource industries, kind of a break-even outcome as being a possibility. Is that still how we should think about 4Q today? For Resource Industries? I am sorry, you cut out for just a second there. Do I think Yes, for Resource. Yeah. I am going to avoid getting into the segment guidance. I think that if you look at what they did in the third quarter, it was very good on sales that were over, I think, $465 million lower. Their operating profit only changed, I think, $24 million or $25 million quarter-over-quarter. So they had a pretty darn good third quarter. If you look at our overall outlook for next quarter, we have lower profit on slightly higher sales. We have a cost absorption headwind in the fourth quarter, and I am sure that will hit RI. And we have usually a little higher seasonal cost, and so I am sure that will hit RI. So I would not be looking for RI to do better on profit in the fourth quarter. Okay. Got it. Thanks. Thanks, Mili. Okay, we have time for one more question and then we will wrap up. Okay, the final question is coming from Ann Duignan. Anne, your line is live. Please state your affiliation and pose your question. Hi, JP Morgan. Doug, I just wanted to say we have always appreciated how visible and accessible you have been regardless of our weighting on the stock. So we appreciate that, and we hope Jim will continue this practice. Thank you, Anne, I appreciate that also. Yeah. My question is around steel prices, raw material prices. We're looking at a significant increase in some of the steel costs year to date. Mike, can you talk about how that might weigh on your outlook going into 2017? It's a positive for maybe the mining side, but should we expect a headwind on the gross margin side? I don't think it would be much. If you go back over, not so much this year, but the couple of years before it, we had higher material cost reduction. Part of that was sourcing and design, and part of that was commodities. The commodity piece of it has mostly evaporated this year. The cost reduction that we're getting is mostly sourcing and design. That will continue, but I think higher commodity prices will mean not so much a headwind on material cost in total, because we'll still have considerable sourcing and design changes. We're always out there doing that. But I think it'll be certainly less of a, at this point in time anyway, I'd say it'd be less of a tailwind as we look into next year. But now, all that said, we would take higher commodity prices in a heartbeat. If we had to decide between high commodity prices or low commodity prices, the impact on our sales would beat the impact on our material cost substantially. Yeah, I can appreciate that. Then a quick follow-up because I know we're out of time. The variable cost reduction, $584 million year to date, is the way to think about modeling those variable cost reductions is that they come back into the system with revenues because they are, i.e., variable? Well, there are a couple of pieces of that. One is material cost reduction is a pretty good-sized chunk of it, and you will just have to make your assumption about what you think material costs will do going forward. The other piece of it is our inventory reduction this year has been a little bit less than it was the prior year. Our inventory, not dealer inventory. The cost absorption headwind, it is still been a headwind, but it is not been as much of a headwind as it was the year before. Is there any way to quantify that? Well, between the two of them, it is been positive $600 million this year. You can use that as your starting point, but for the year, and then just decide, use your own judgment. Do you think we are going to get more or less or more material costs next year? Or as you started out the question, do you think that commodities might be too big of a headwind for us? I think what we have done this year is probably a reasonable starting point. Okay, so variable cost reduction, no headcount in that? There is also period and variable improvement there, but we have had some of that go in both directions. When volume goes down, that is usually a little dicey for efficiency. We have done a lot of work to help offset that impact. Then recently in Belgium, efficiency has been less favorable than it was before, certainly. So the bulk of the variable cost reduction we have got this year has been the cost absorption in material. Okay, I appreciate that. Again, good luck, Doug. Thank you. All right. Thanks. With that, we will wrap up today's call. Thank you, and we will talk to you again in January. Thank you, ladies and gentlemen. This does conclude today's conference call. You may disconnect your phone lines at this time, and have a wonderful day. Thank you for your participation.