๐ŸŽ Black Friday: 50% off Unlimited and 30% off Pro annual plans
Photronics, Inc. (PLAB)
NASDAQ: PLAB ยท Real-Time Price ยท USD
24.03
-2.32 (-8.80%)
At close: Nov 20, 2026, 4:00 PM EST
24.53
+0.50 (2.08%)
After-hours: Nov 20, 2026, 7:37 PM EST
โ† View all transcripts

18th Annual Southwest IDEAS Conference

Nov 18, 2026

Summary

Texas and Korea expansions, followed by a multi-year Boise EUV investment, target higher-node capabilities and future revenue growth. Near-term demand faces memory-related delays, while regionalization and captive outsourcing offer growth opportunities.

Kelley Buchhorn
Managing Director, Three Part Advisors

All right, good morning. Up next is Photronics. My name's Kelley Buchhorn. I'm with Three Part Advisors. A real brief overview of the company. Photronics is a global leader in photomask technology, manufacturing highly specialized products that are essential to the production of semiconductors and flat panel displays. They are a Nasdaq-listed company, and they trade under the symbol PLAB, and have a current market cap of just over $1.5 billion. Today, joining us from the company is Vice President of Investor Relations, Ted Moreau. With that, I'm going to pass it over to Ted.

Ted Moreau
VP of Investor Relations, Photronics

Thanks, Kelley. I've been with the company for two years. Prior to that, I've been handling IR for a couple of other firms, and before that was on the sell side. All within the technology space. So have had a pretty long history of being in the semiconductor space and the communications space. A little bit about the company. These are a little stale numbers. We have an October fiscal year end, so we're going to report earnings, our fiscal Q4 earnings on Wednesday, December 9th. As soon as I'm done today is when I'm going to see all the financials for the quarter. Just so you're aware of where we stand with that.

The numbers are a little stale from that perspective, but I think the highlight from here is approximately low to mid-30s percent operating cash flow margins typically is what we generate. So really good generator of cash flow, at least operating cash flow. Now, we are in a capital-intensive business, and that does influence our free cash flow a little bit. On the lower left-hand side, you see revenue by geographic origin. We have 11 clean room facilities throughout the world. This is revenue produced out of those facilities. So it's not shipped to location, it's produced out of those facilities. You'll notice China is about 27% of our total revenue. That is broken up. We specifically break that up between our flat panel display and our semiconductor business because there's different competitive dynamics at play in both those two markets.

We wanted to make sure that investors understood where our exposure is with each. Other than that, Taiwan is a very big market for us. We've done a fantastic job in both China and Taiwan and Asia overall in growing the business. We'll get into a little bit about how the industry is evolving from a very high concentration of manufacturing of semiconductor chips in the Asia market to being a lot more diversified globally and how that influences our business. It's very relevant for us going in the future. Lower right-hand side of the screen, you'll see a little over 70% of our business is in the semiconductor space, so that's the integrated circuits. The remaining 28% is in flat panel display. What is a photomask?

I don't see a lot of familiar faces, so I thought I'd go into this a little bit. A photomask is basically, we receive a semiconductor chip design from our customer. Our customer, we work with semiconductor manufacturers. NVIDIA, they are fabless, they are not a customer. We don't even talk to them. UMC, GlobalFoundries, Texas Instruments, Taiwan Semiconductor, Intel, Samsung, any place, any semiconductor company that manufactures, has manufacturing operations, that's who we talk to. We receive the semiconductor chip design from them, and then what we do is we etch into a piece of glass that's 6 inches by 6 inches what the semiconductor chip design is. At an older process node or geometry of 90 nanometers or beyond, a lot of times a semiconductor chip will have approximately 25 layers, and every layer of that chip design requires one photomask.

At 90 nanometers, that's 25 photomasks for us. At 14 nanometers, the layer count increases to between 70 and 80 layers. So very significant improvement in unit volume per chip design. We take the chip design, we etch it onto the piece of glass, then we clean it off, inspect it, just like in the traditional semiconductor manufacturing process, and then set that aside, and then we do all the different layers, then we box it up and do a set and send that off to the manufacturing facility. At the semiconductor manufacturing facility, you may be familiar with a company called ASML with their lithography tools.

Our mask goes into the tool, laser shines through the mask and projects the schematics of the chip design and shrinks it down by a very significant factor, and that shows up on the wafer, and then it gets printed on the wafer and etched into the wafer. So that's really what the process is. Today, you cannot manufacture one semiconductor chip without a photomask. People have said, for 30 years, there's been kind of an evaluation of, "Well, can we do this without photomasks?" You could. Today, you can manufacture an entire wafer in 30 seconds using a photomask. That one wafer without a photomask would take 10 hours. So the industry's going to stick with photomasks. In any event, that's on the semiconductor side.

A very similar process occurs on flat panel display, but the display piece of glass is 3 meters wide, 2 meters tall, because you need a piece of glass that can handle that screen. Or what happens is, like if you were going to have a display for a smartphone, the photomask would be similar size, but you'd have rows and rows of the display of the smartphone or smartwatch or tablet, whatever it is. So our display business is very heavily tied into the consumer electronics industry because of that, because it's largely TVs and smartphones and tablets and PCs and whatnot, right? But the process is the same. It's just because the glass is so heavy and bulky, it's a much more automated process. People are not walking around carrying the pieces of glass. I got into a little bit in our semiconductor discussion.

This is the semiconductor graph. What you see here is, along the bottom are the various process nodes. You go from more mainstream and legacy technologies and 90 nanometers, 130 nanometers and older, all the way into the more leading edge. An NVIDIA GPU today, I believe, is starting to be manufactured at 2 nanometers today, right? This graph depicts not only the increased layer count, but also the dollar value of each individual layer is going up exponentially. At 90 nanometers, and again, we were talking about 25 layers or 25 masks, the dollar value of that, give or take, would be around $50,000 in revenue for Photronics for that one chip design, for the 25 layers.

At 14 nanometers, we increase up to 70 to 80 layers or 70 to 80 masks, and the dollar value of that mask set is about 20 times greater than that at 90 nanometers. To go to 5 nanometers, again, 80 masks, let's say, 80 to 90 masks, the dollar value of the content of the mask set increases from the 14 nanometers to the 5 nanometers, increases another 10 to 20 times. So a very significant parabolic move on the dollar value of the mask set. If you looked at, or if you can appreciate that our business historically has been in the lower left-hand side very significantly. We've been growing what we call the high end, 28 nanometers down to 7 nanometers today. That's our high-end business. We've been growing that.

That represents 44% of our semiconductor business in the most recent quarter, in the July quarter. We're trying to move our business into more of the leading edge, where a lot of our customers that have their own mask operations, like a TSMC, Intel, Samsung, that's where they do a lot of their mask production for internal consumption. There are opportunities for us to participate more and more in that part of the market. We are going to, over time, move into that part of the market to drive revenue growth. I had mentioned, there's a captive element of the market and a merchant. We're a merchant supplier. We are the number 2 merchant supplier in the semiconductor space. The captives are about two-thirds of the total semiconductor photomask market.

The captives being TSMC, Intel, Samsung, Micron, SK Hynix, and SMIC, which is based in China, Semiconductor Manufacturing International. Of those, they are virtually all customers of ours. Samsung's a 10% customer. TSMC is in our top 20. So, many of them are very significant customers. If you took Samsung's captive photomask business and pulled that out of I'm sorry. Let me start back. TSMC's captive photomask business and pulled that out of TSMC, the dollar value, because of what I had showed you on the prior page, where they do the bulk of their mask sets internally at the very leading edge, 7 nanometers, 5 nanometers, 3 nanometers, two. If you took that business and isolated it out and put a revenue dollar on it, we believe that that business would be worth, or the annual revenue generation would be about $4 billion.

Here, as a merchant supplier, the number 2 merchant supplier in the market, our semiconductor business is about $620 million in revenue per year. Yet, at the same time, from a unit volume perspective, TSMC and Photronics are doing about the same number of units. Clearly, the progression towards the more advanced masks, obviously that is where it shows up in the dollar value. That is why the captives have two-thirds of the market. As we go into the future, it is possible that the 67% actually goes higher because of the dollar value discrepancy. At the same time, they are outsourcing more and more to us. It is just, are you receiving enough business to offset that market share change? Even if that went to 70%, that is not because we are losing business to captives.

It is just because of the dollar value change. We have 11 clean room facilities throughout the world. Six of them are in Asia, three here in the U.S., and two in Europe. In Asia, our biggest facilities are in Taiwan. That is where our bread and butter is. We do great business in Taiwan, China. We have both semiconductor and display. Our display business in China is really focused on more consumer electronics for the emerging markets. We also have a display facility in Korea. That facility is for display, for consumer electronics, largely for the U.S. and for Europe. You can imagine who those consumer electronics providers are in those situations. What we have seen in 2026 is because of very tight memory conditions, consumer electronics for the U.S. and for Europe all remain on track.

Consumer electronics for emerging markets that are being produced in China, those consumer electronic providers have been having a very challenging time capturing memory for those devices, whether it is a laptop or a smartphone or a tablet. Because of that, we have seen delays of consumer electronics releases for emerging markets, and that has influenced our display business so far this year. The other 2 points that I want you to take away from this slide is, in the U.S., we are expanding our operations in our facility here in Texas. Historically, this facility has been operating at about 130 nanometers, so mainstream older geometries, older process nodes. We are upgrading that facility to 65 nanometers.

We are expected to, when we report our October quarter in three weeks, we are expected to disclose that we will recognize our initial revenue out of that expansion in the October quarter. That is what we said on our July quarter when we had our last earnings call, and that is what we are expecting to announce in the next couple of weeks. That is important because 65 nanometers is not a market that we have participated in to any significant extent in the past in the U.S.

We believe that we'll be able to capture market share because our customers tell us, "Yeah, we are very reliant upon a different supplier for photomasks, so we need to diversify our supply chain." That will allow us, that concept where they are diversifying their suppliers, should allow us to capture some market share at 65 nanometers in the U.S. So we're very optimistic about that. What's interesting is, at 65 nanometers, some of the applications include silicon photonics, which would be very relevant for hyperscale data centers, quantum computing, memory. So even though those are concepts that we think of being more leading edge, from a semiconductor chip design, it's not necessarily the case. So those are applications that will open up to us, and we're really excited about those. In Korea, this is another facility that we are expanding from.

We do the bulk of our business in the 65 and 40 nanometers in Korea, and a little bit at 28. We're expanding that facility down to 8 nanometers. So what we are trying to do is capture more of that parabolic move on the curve that I was showing earlier. That is really being driven by a couple of very significant customers in the Korean market. Because one of the most important things in winning business is your turnaround time, and shortening your delivery times to the customer base is critically important. So by reducing the shipping costs, you can improve the shipping timeline. You can deliver your products much more rapidly to the customer base. So that's why we have the 11 facilities throughout the world. On display, we're going through, again, this is 28% of total revenue.

We're going through a little bit of an upgrade cycle, or the industry is, to what's called Generation 8.6 AMOLED. We are the only company so far that has disclosed that we've shipped initial masks for Generation 8.6 AMOLED. With this technology, we are able to reduce the weight or we're able to help consumer electronics providers reduce the weight of the glass utilized for the consumer electronics. So as you think about smartphones today and the whole introduction of foldables, the foldable phone becomes pretty heavy in your pocket, right? So by reducing the glass, that helps reduce the weight. It also provides brighter colors and whatnot. What it does is we've been able to, as you open up the foldable, there's been a crease in the past. In the initial versions of foldables, there's been kind of a crease there.

We've been able to, with Generation 8.6, remove that crease from the viewer, so the viewer doesn't notice a crease in the foldable smartphone. So a much more pleasant experience for the consumer. So the G8.6 upgrade cycle, we believe, very early days, very early innings, maybe we're in the first inning of that, should help drive our higher-end consumer electronics business for the next couple of years and help to drive a little bit of revenue growth for that business over the coming years. So, why do we win? Again, what's critically important? It's not necessarily price. Price is not the most important thing, and it's actually maybe not even top five. Are you doing what you said you're going to do? I mean, that's critically important. That's important for me to tell you as investors.

You want to hear, "Are you doing what you said you're going to do?" Well, the customers want to hear that too. Are you doing what you said you're going to do? Are you capable of delivering the product? Are you capable of delivering the product on the timeline that we want, and that is hugely important, and that's why we have the 11 facilities throughout the world, because you want to be close to your customer. For example, there's been orders that have come into our business, where the requested delivery date is, say, 10 or 12 days. If we have limited capacity and we quote 20 days, we probably just lost the order. Very important for us to be able to quote very short delivery times to our customer base, and then obviously have very high-quality product.

Because if you think back to that semiconductor application where the photomask is being inserted into the lithography tool, where the laser's shining through, if there's even a speck of dust on the mask, that'll show up on the wafer, and all of a sudden you have to halt production. So that is, high-quality masks is hugely important. I had mentioned that we are upgrading our Texas facility and our Korea facility. So right now, we're going through a CapEx cycle. As I said in the beginning, we generate about low to 30%-ish area operating cash flow margins, but obviously free cash flow is being squeezed a little bit right now because of this upgrade cycle. Historically, based off of the graph, you can kind of see our, we'll call it maintenance CapEx, is around 15% of total revenue.

In 2025, we began this upgrade cycle, where we're upgrading the Texas facility. We're replacing equipment that's been in our facilities for a very long time, and they've gone end of life, and we're expanding the Korea facility. So, our CapEx as a percentage of total revenue is more like 30%+. Right now, I would expect that when we report earnings in three weeks, I would expect that 2027's CapEx number is also going to be pretty elevated. One of the things that we said on the last call is we are going to start upgrading our Boise facility. This is a facility that's capable of handling down to 7 nanometers today. That facility is going to upgrade to what's called extreme ultraviolet lithography. So think of the capabilities of an ASML, but we're not putting ASML in our clean facilities. That's overkill.

They're way too powerful for what we need. But the important point is we are investing in EUV to drive the future growth, and be relevant at the very highest end of the market in the future. The CapEx cost to upgrade just our Boise facility from an equipment perspective is $300 million. So we're not going to incur that in one year. We're going to do that over several years, probably around four or five years, to kind of spread out the cost. Along the way, we do believe that we'll start to participate a little bit in the EUV market. So maybe in about three years from now, we'll start to capture some revenue in EUV before we're done with the entire EUV upgrade. But it's definitely going to keep our CapEx somewhat elevated over the next several years.

But one, that's to remain competitive in the long run, and two, it's important to understand, we believe that we'll still strive to generate positive cash flow despite that cycle. That's kind of an overview of the business. One of the big trends that are going on in our industry is a reshoring of semiconductor production into the U.S. That's positive for our U.S. business, and even a more regionalization of semiconductor manufacturing throughout the world. When COVID hit, much of the semiconductor industry was manufacturing in China, and all of a sudden, COVID hits, supply chains disrupted. Our lead times went from, on average, one to three weeks to now four to five months during COVID. Semiconductor manufacturers couldn't have that, and so they've realized we need to diversify the manufacturing base. We've seen TSMC, Taiwan Semiconductor, now expanding into Arizona. They're expanding in Japan.

They're expanding in Dresden, Germany. Other companies such as UMC, which is a big customer of ours, they're primarily in Taiwan, but they're going into Singapore. Micron's going into Singapore. GlobalFoundries is expanding their facilities. We're seeing this massive investment in the semiconductor industry to diversify the geographic presence. That's positive for us. We're seeing captives, the TSMCs, Samsungs, Intels, outsourcing more. They're going to continue to push the innovation curve, and that's where they're going to focus their internal mask operations on. As they move to 2 nanometers and beyond, they open up opportunities for merchant suppliers such as Photronics. We're excited about that, and that's also a part of node migration. Anytime a chip at 90 nanometers a couple years ago, maybe this year is going to 65 nanometers, and maybe it goes to 40 nanometers in a couple years.

That node migration concept is a natural evolution of the semiconductor industry. That's a positive for our business. We talked about the displays and the upgrade cycle that we're going through there. I don't want to review the last quarter's results because they're really stale by this point. I thought we've got about a little over 10 minutes to go, so why don't I open up the floor to questions? Yeah, go ahead.

Speaker 3

How does TSMC decide what to give the merchants and what to keep captive? I mean, it sounds like obviously there's just the nodes that you guys don't have the capabilities of, but other than that-

Ted Moreau
VP of Investor Relations, Photronics

Yeah

Speaker 3

Can you give examples of

Ted Moreau
VP of Investor Relations, Photronics

Yeah

Speaker 3

like products that they do and products that you do and why they make that decision?

Ted Moreau
VP of Investor Relations, Photronics

The question is, why do captives outsource and what's their thought process on when they do outsource? If you think about, and I'm going to actually bring up TSMC and Samsung to show the difference a little bit. They're similar, but a little bit different. TSMC, again, about $4 billion would be the revenue for their photomask business. Of their overall company, 75% of TSMC's revenue is at 7 nanometers and below. They are, and they've always had, their business model is push leading-edge innovation. First to market to 3 nanometers, first to market to 2 nanometers, first to market to the angstrom technologies, right? That's what their photomask business is focused on. But they have a lot of capacity for photomask. And so, yes, they are focused on leading-edge innovation. As they move, they open up opportunities, trailing edge.

TSMC for us, again, they are a top 20 customer. They're not 10% customer, but they're 20%. Or, I'm sorry, not 20%. They're a top 20 customer. So very important to us and very significant for us, and they do a lot of business, right? But their focus is pushing leading-edge innovation, and that's where their photomask operations is going to focus. Samsung also has a captive photomask business. But Samsung's in the business of consumer electronics, right? Smartphones, tablets, TVs, refrigerators, washers and dryers, and whatnot, right? And their semiconductor business supports the consumer electronics business. Same thing with their captive photomask business. Their captive photomask business is basically to get to 2 nanometers, and then they want to outsource the rest of it because they don't have as much capacity for photomasks as like TSMC does. So they want to outsource as much as possible.

That is why we are expanding our Korea facility, right? Because as Samsung goes to 2 nanometers, they do not want to worry about 5 nanometers, 8 nanometers, 10 nanometers, 14 nanometers. For them, that is in the past. They are just pushing the leading-edge innovation and focus on the very leading-edge innovation so that they can get there to compete with TSMC. It is a little bit of a difference, but a lot of it is, as they move, we move with them. Just think about TSMC is spending $64 billion on CapEx this year. So they can do EUV, right? That $300 million price tag for EUV, for photomasks, no problem for them. For us, that is like half of our one year's revenue, right? So we want to be close.

We want to have the capabilities to be close to you, close to the leading edge, but we cannot. It is too capital intensive for us to do it, so we have to spread it out. So there is a little bit of that at play. Then as a captive tells us, "Hey, we are going to outsource to you," that is when we start to think about investing in that business.

Speaker 3

Follow-up on that. It sounds like Samsung is more of a capacity as they have lower-

Ted Moreau
VP of Investor Relations, Photronics

Yeah

Speaker 3

capacity to do it, and TSMC-

Ted Moreau
VP of Investor Relations, Photronics

Is a little bit more of an evolution concept.

Speaker 3

Evolution. How many outsource guys like you are there, and then where do you sit on nodes versus are you guys at the head of the nodes for the outsource guys?

Ted Moreau
VP of Investor Relations, Photronics

Of the merchant suppliers on the semiconductor side, we're the number 2 player. A little bit larger than us is Tekscend, T-E-K-S-C-E-N-D. They're based in Japan. They just, a year ago, spun out of a company called Toppan. I would say they're technologically, we're about the same as each other. They do have already EUV capabilities that they've been building, and that's because they've been subsidized very significantly by the Japanese government. We're not receiving subsidies here in the U.S., so that's allowed them to get into EUV earlier. I will say that it sounds as though it's more of a 2027 revenue for them, and we believe it's one customer today, so it's not like there's a big market for it yet. It's always going to be a limited market when you go to EUV.

It's a little early from our perspective, but since they had the subsidies from the Japanese government, they went ahead and did it. So they're a little bit bigger than we are. We're the number 2 player combined. We're at about 70% of the total market on the merchant side. The number 3 player is a company we actually have a joint venture partnership with. They're called Dai Nippon Printing. They're about half of our size. There's another player called Taiwan Mask, and they're like $125 million-$150 million of revenue. So that's the top 4, and that's a global perspective. Let's talk about China. It's a little bit different. There's Chinese local players that have entered in the market on the semiconductor side, competing pretty aggressively. They're getting subsidies.

In that market, we've been walking away from 90 nanometers and focusing on the high end, so 22, 28 nanometers, and 40 nanometers. We do believe that they're going to be coming into our market, into our area a little bit more aggressively in the coming years. We do see that. China's the largest market and fastest growing market. We believe the way we're operating our business right now is maybe China's not going to grow for us. Maybe it'll be stagnant. We do great business. We have great relationships. Customers really trust us. They know that when they give us a design, it's on lockdown. It's between us, right? If they give a design to the Chinese local guy, even though they're getting subsidized, and so they can discount pricing, well, that design could go someplace else.

There's a trust factor that they just don't have with the Chinese locals at this point. So it keeps us in a pretty good position, in a really good position. China's been a great cash flow market for us, great with profitability. We're very competitive on costs. It's just that incremental subsidy is making the dynamics a little bit more challenging there. And so, we do have decisions to make on what do we do? Do we continue to invest there, or do we decide that maybe we have to make some changes? Nothing's been determined at this point in time, but it's something that we're definitely evaluating. China IC is about 15% of our total revenue. On the display side, we are the leader technologically. Nobody can do what we can do at this point.

Even though there are Chinese locals and they've been capturing market share on display, it's not versus us, it's versus some of the other players at the lower end of the market. And we're going to continue to move the goalposts. That's not as easily possible on the semiconductor side because of some U.S. government restrictions that have been placed on us on the semiconductor side, where we are not allowed to provide photomasks for the China market at 14 nanometers or below. So, we have this wall that we're kind of hitting right now, and while the Chinese competitors are coming in. That clearly says we have decisions to make. Yes, sir.

Speaker 3

Yeah, I was an investor many years ago. I like to be in the picks and shovels.

Ted Moreau
VP of Investor Relations, Photronics

Yeah

Speaker 3

space.

Ted Moreau
VP of Investor Relations, Photronics

Sure.

Speaker 3

Which seems to fit your model. Seems like it is a great value right now. Your stock was as high as $55 earlier this year, and we are $30 lower.

Ted Moreau
VP of Investor Relations, Photronics

Yeah.

Speaker 3

What happened?

Ted Moreau
VP of Investor Relations, Photronics

What happened to the stock price earlier this year? In the springtime, our stock from mid-March until our earnings call was up 75%, and a lot of that had to do with money going into semiconductor ETFs and index funds, and so we were benefiting from that. In the April quarter, we had guided to $216 million was the midpoint of our revenue guidance for the April quarter, and we came in at $210, so we missed the midpoint, came in a little bit below the guidance range. When your stock is up 75% and you miss, that is what is going to happen, right? But why did we miss?

We missed because memory sold out, consumer electronics are being delayed, so we are seeing delays of releases of consumer electronics, delays of releases of semiconductor chip designs going into those consumer electronics because memory sold out, and because some of the fabs in Asia were at very high utilizations. The fab was saying, "Hey, customer XYZ, I know you are trying to tape out a semiconductor chip design, but I am sold out on my fab utilization. I have no capacity for you, so you are going to have to delay it." So we saw some of that in the spring. I do not see any reason why those conditions have changed, so it is a little bit more of a stagnant environment for us in the very near term.

Well, unfortunately, memory's apparently sold out for the next three or four years, so I have no idea what I mean, who knows how it's going to play out, right? That's why I focus on, well, what's going to drive our earnings per share in the future? What's going to drive our revenue in the future? That's going to be our Texas expansion, then followed that by the Korea expansion. That's what we can control, right? Both of those situations are going to drive earnings to shareholders instead of earnings to the joint ventures.

Speaker 3

Then, semiconductors have typically been a very cyclical-

Ted Moreau
VP of Investor Relations, Photronics

Yeah

Speaker 3

business.

Ted Moreau
VP of Investor Relations, Photronics

Yep.

Speaker 3

People are saying it's different this time. What is your thought on that?

Ted Moreau
VP of Investor Relations, Photronics

Is this time, is the AI build-out cyclical and reverts to historical cadence, or is it different this time? I wish I had an answer for you. Everybody in the supply chain says, "Hey, we're sold out for 2027." Okay. The market is clearly concerned about 2028, 2029, right? What happens to Micron, which has gone from 25% gross margins to 85% gross margins in like two quarters? Well, is that sustainable, right? That's what the market is saying. The market's saying no. I don't have a crystal ball for you.

All I know is everybody says demand is through the roof right now. The only way we can, I guess, figure that out is, well, if Anthropic doesn't get all the money that they want for their AI build-out, right, through their IPO, or if CoreWeave continues to have a challenge, all we can say is, well, if you back up some of that, what's the demand still look like? It still feels like it's going to be really strong. Now, for us, what becomes really interesting is once you have this AI data center build-out, once you get through it a decent amount, humanoid robot comes down the pipeline, and for us, some more interesting opportunity. I've heard, I don't know if these numbers are exact, but I've heard through Stifel analysts, humanoid robots are supposed to have $20,000 worth of semiconductor content in each robot.

That's a heck of a lot of chips, and that would mean a heck of a lot of photomasks for that build-out, right? So that could be very interesting for Photronics. We're actually past our time. I will hang out if anybody wants to come up and ask any other questions. Happy to answer them. My email address is on every press release that goes out. Send me an email if we don't connect today. Thank you so much for listening.