Good afternoon, ladies and gentlemen. Thank you for standing by, and welcome to the PTC 2019 fourth quarter conference call. During today's presentation, all parties will be in a listen-only mode. Following the presentation, the conference will be open for questions. I would now like to turn the call over to Tim Fox, PTC's Senior Vice President of Investor Relations. You may begin.
Thank you. Good afternoon, everyone, and thank you for joining PTC's conference call to discuss our fiscal Q4 2019 results. On the call today are Jim Heppelmann, Chief Executive Officer, Kristian Talvitie, Chief Financial Officer, and a special guest with us today, Jon Hirschtick, CEO of Onshape. Before we get started, please note that today's comments include forward-looking statements, including statements regarding future financial guidance. These forward-looking statements are subject to risks and uncertainties and involve factors that could cause actual results to differ materially from those expressed or implied by such statements. Additional information concerning these factors is contained in PTC's filings with the SEC, including our annual report on Form 10-K and quarterly reports on Form 10-Q. Forward-looking statements included on this call represent the company's view on October 23, 2019, and PTC disclaims any obligation to update these statements to reflect future events or circumstances.
As a reminder, we'll be referring to operating and non-GAAP financial metrics during today's call. Discussion of our operating metrics in the items excluded from our non-GAAP financial measures and a full reconciliation of GAAP to comparable non-GAAP financial measures are under both 606 and 605 are included in this afternoon's earnings release materials and related Form 10-K. I'd also like to remind everyone that starting with the first fiscal quarter of 2019, we adopted ASC 606 on a modified retrospective basis. In our earnings documents, we provided results under both ASC 605 and 606. Please note that the SEC requires the presentation of 605 results for the comparability with the prior year results. As such, our discussion on this call will focus on 605 results unless otherwise stated.
Also, please note that certain operating metrics such as bookings and ACV are under the same both for 606 and 605. With that, I'd like to turn the call over to PTC's CEO, Jim Heppelmann.
Thanks, Tim. Good afternoon, everyone, and thank you for joining us. As Tim mentioned, we're very excited to have Jon Hirschtick joining us this afternoon to help me usher in what we believe is a new era of software-as-a-service or SaaS in the product development industry. PTC and Onshape share a common vision around helping organizations transform the way they develop products. Onshape's pure multi-tenant SaaS platform is a perfect complement to our market-leading on-premise product development solutions. Coupled with our industrial IoT and AR solutions, we can address an even broader part of the waterfront of digital transformation that's sweeping across the industrial market. Before Jon and I provide you with some additional color on our combined vision for PTC and Onshape, I want to provide highlights of our fourth quarter and fiscal year 2019 performance and discuss progress against key strategic initiatives.
Given all the news and updates we're planning to share today, we know there is a lot to absorb, I'm guessing that we'll run out of time before we run out of questions. To help further unpack all the moving parts, we're hosting an investor webcast on November 18th, where we will reveal our long-term financial targets, show you how we plan to get there, and provide more insight as to how Onshape plays in the picture. Stay tuned for more details on that event coming from PTC's IR team. On our Q3 earnings call, I characterized fiscal 2019 as a transitional year, where we achieved some important milestones, like going global with subscription licensing, while navigating through some short-term challenges in the business, including a lackluster macro situation in the industrial world.
With that as context, I'm very pleased with our Q4 results and confident that we've established a strong foundation for accelerated growth going forward. Our Q4 financial performance was solid, with revenue, operating margin, and EPS all within our guidance range. Q4 bookings of $150 million was above the high end of the guidance range, thanks to our core business delivering above-plan results and very strong performance in our growth businesses. Despite a challenging macro situation and a global PMI that's been below 50 for nearly six months now, both Q4 and fiscal 2019 bookings represented record sales for PTC. ARR, which is the key top-line metric we'll be focusing on going forward, grew 12% year-over-year in constant currency, right in line with the target we outlined in early September.
With PTC now firmly established as a double-digit grower, you'll see in our guidance later that we're lifting our sights a bit and aiming toward a mid-teens ARR growth rate in fiscal 2020. Drilling first into highlights within our core business, PLM had a strong bookings quarter and came in ahead of plan. CAD bookings showed a strong sequential increase, thanks in part to a rebound both in the channel and in the geography where bookings had dropped significantly following the last time buy and termination of professional licenses. We are not yet back to where we were in those geos, but the trend is good, and we recaptured some ground. In our growth businesses, IoT had a very strong quarter, which included a mega deal with Rockwell Automation.
Excluding the mega deal, IoT still delivered one of the strongest expansion quarters to date, with over 70% of the bookings driven by a record number of six-figure deals. Which highlights the momentum we're seeing in the business. Our augmented reality business delivered another strong quarter with six-figure AR deals accelerating once again, driven in part by continued traction with our newest solution, Vuforia Expert Capture. FY 2019 was a pivotal year for AR, with industrial enterprise adoption clearly gaining traction across a wide range of vertical markets, including medical devices, pharma, aerospace and defense, high tech, and automotive. Two analyst reports covering the AR market were published in the quarter, and we were pleased to see Vuforia declared the clear leader in each.
With AR delivering strong growth in Q4 and a strong pipeline headed into fiscal 2020, we're confident that AR is emerging as another exciting and dependable long-term growth engine for PTC. Turning now to our three strategic alliances. We're pleased to see continued traction in Q4, with the pace of business accelerating in each. Beginning with Rockwell Automation. Following strong Q3 performance, the Rockwell team capped off the first year of our alliance by delivering a 75% sequential increase in new deals. For the full year, our alliance delivered nearly 100 transactions in 21 different countries across a broad cross-section of vertical markets, highlighting the deep industrial domain expertise and brand recognition that Rockwell Automation brings to the relationship. The synergy is great because 70% of the accounts that Rockwell has sold to represent new logos for PTC.
With a large and growing pipeline of opportunities, expansion deals accelerating, and over 2,000 employees trained globally, we're more confident than ever about the success of this key strategic alliance. In our Microsoft alliance, Q4 performance was once again strong, with 72 deals closed in the quarter, double the number of deals closed in Q3, and bookings ended the year well above plan. Geographically, the Americas continues to be a main driver of growth. However, the European team had their strongest performance to date and inked their first seven-figure transaction. Overall, we're very pleased with the momentum of this alliance, and we're excited to be so closely aligned with Azure IoT and mixed reality and with Microsoft generally in the manufacturing space.
Lastly, on the alliance front, we continue to see emerging signs of traction for Creo Simulation Live, our CAD solution that uses real-time simulation technology from our strategic alliance with Ansys. We closed 126 transactions in the quarter, a 66% sequential increase from Q3, and we landed a number of follow-on expansion deals. With live simulation now available in Creo 4, 5, and 6, we expect adoption to further accelerate in fiscal 2020. To summarize on the growth front, Q4 was a strong quarter that wrapped up a solid year. Despite the challenging macro situation, our CAD and PLM businesses saw a combined constant currency ARR growth of 11%. Our Focused Solutions Group, what I've referred to at times as our productivity zone, closed the year stronger than expected, delivering 10% constant currency ARR growth for the year.
Our IoT and AR growth engines delivered 28% constant currency ARR growth. With the combination of IoT and AR exiting fiscal 2019 at greater than 12% of total ARR and about one-third of total bookings, these businesses represent a growing slice of the PTC pie as we enter fiscal 2020, which bodes well for our growth rates going forward. If you step back and look at the PTC portfolio in fiscal 2019, you see that on top of a strong and stable core business, we have two great growth engines in ThingWorx IoT and Vuforia AR. As we head into fiscal 2020 with the Onshape acquisition, we're now bringing on a third growth engine.
As part of our diligence process, we commissioned a market study from McKinsey that suggested the SaaS-based CAD market would grow more than 35% year-over-year and represent nearly 20% of the total CAD market in five years. While Onshape is new, it sure feels familiar to us because Onshape lives in the same CAD and PLM market space as our core business. It's simply a next-generation SaaS version of a technology concept that PTC itself pioneered 30 years ago. Onshape is not a distraction for us, but rather a doubling down on CAD and PLM to ensure that these core businesses will continue to grow and thrive over the longer term as the industry moves to SaaS. As you know, we at PTC have been talking about the renaissance of CAD for some time.
We realized that along with generative design, real-time simulation, augmented reality, IoT, and additive manufacturing, SaaS will surely play a role in this industry renaissance. Once you realize how important SaaS will be and why, then you can't avoid the realization of how important Onshape, the only pure SaaS player, will be to this industry. Onshape is the first and only from-scratch native SaaS product development platform that unites CAD, data management, and collaboration tools in a next-generation package. Onshape is a very unique asset. Because of the incredibly high cost of entry into the well-established CAD market, you simply won't find another CAD SaaS startup out there.
The only people who could even attempt a startup this bold are those with a track record so strong that they could raise 9-digit amounts of venture funding and pull in some of the industry's best talent. Which brings me to Jon Hirschtick, John McEleney, and Dave Corcoran, who founded Onshape and run the company today. I think it's fair to say that Jon, John, and Dave are some of the most accomplished entrepreneurs in the history of the CAD industry. They created SolidWorks to capitalize on the Microsoft Windows wave in the mid-1990s, and then turned it into a grand slam after it was acquired by Dassault, helping Dassault position SolidWorks as their primary growth engine over the past two decades.
Ultimately, these guys came to the understanding that SaaS would be as disruptive to the CAD establishment as Windows was, and that the CAD and PLM industry would surely move to SaaS, just as nearly all other software industries already have. I agree with their premise that SaaS is inevitable in our world, and there are many strong reasons why. Onshape is a bona fide growth engine that will allow PTC to take share in the growthiest parts of the CAD market. I'm eager to share the benefits that SaaS brings to the world of CAD and PLM. Since we have Jon Hirschtick here with us, I'd like to give him a chance to tell you firsthand what he and his team have been working on. Jon, can you share a little bit about your team and the work that brought you here to PTC?
Happy to. Thank you, Jim. Let me first say how excited I am today. I've spent my entire career since the 1980s in our industry, working on CAD and other software for product development. I've been lucky enough to be part of some of the biggest moments in the past in our industry, and I feel like today is perhaps the biggest moment I've experienced in our industry. When Jim and I met earlier this year, it was so exciting to me that he had this strong, clear vision that we share for the power that a pure SaaS platform could bring to the product development world. It was so refreshing for me to see also Jim's understanding of and commitment to pure SaaS, pure cloud, since so many others in our market are pursuing partial cloud approaches.
Frankly, partial cloud has been shown to fail time and time again in other markets. Beyond just Jim's vision, he also obviously has the resolve to take bold action to pursue his pure SaaS vision. Thank you, Jim, for the kind words about me and my fellow Onshapers. I'm very fortunate to be working with a lot of the great team that was with me when I founded and was CEO of SolidWorks. My Onshape co-founder, John McEleney, has also worked in our industry since the '80s, most notably as my business partner and another former CEO of SolidWorks. Another Onshape co-founder, Dave Corcoran, is a former VP of R&D at SolidWorks and is one of the key minds that shaped several of the greatest products in our industry, including SolidWorks and, of course, Onshape.
I wish I had the time here to tell you more about each of the rest of the 100 or so people on the Onshape team, a fantastic group. We founded Onshape because we saw the problems product development teams have with installed software applications and sharing data by copying files, often thousands of files, among different people and tools. Whether product developers realize it or not, they're all losing time, efficiency, and innovation to these problems. At the same time, we saw how companies using pure cloud, pure SaaS technology, like Salesforce, Workday, NetSuite, Zendesk, basically everyone were reinventing other software markets. We saw that we could solve many of the problems in product development, but we would need, as Jim said, to build a clean-sheet, new-generation system to do it, and that's what we've built with Onshape.
Today, we have thousands of customers using Onshape, with story after story of them developing products faster than they ever could, being more innovative. The great products that they're developing with Onshape is our ultimate reward. It's probably easy for you to see why I'm excited to be partnering with PTC. PTC is going to help us dramatically grow the number of customers we can reach with Onshape. PTC is also going to draw on their strong technical breadth and depth to further broaden the scope of what we offer on the Onshape platform. Thank you.
Great. Thanks, Jon. I can't tell you how excited I am to have you and your team on my side this time around, as we head into another wave of industry change and transition. Let me share a few important thoughts about how Onshape fits with PTC's core CAD and PLM strategy. Our near-term goal is to increase our participation in the growthiest part of the CAD and PLM market, which really represents an adjacency to where Creo and Windchill play today. Jay Vleeschouwer pointed out in a recent report that last year there were 174,000 new seats of CAD sold in the market globally, with Dassault SOLIDWORKS business taking about 80,000 and Autodesk Inventor business capturing about 40,000. Creo, CATIA, and NX took the bulk of the rest.
In the near term and midterm, it is that 70% of the market served by SolidWorks and Inventor that's most interesting to pursue with Onshape. Onshape gives us an opportunity to both participate in and then disrupt this part of the market, and we can enter and play with a very strong hand. Thanks to the massive advantage in innovation velocity that Jon spoke of, plus some great new technology like generative design that PTC can share within the portfolio, we expect Onshape will quickly mature into a full-featured SaaS CAD solution. There will be no glass ceiling on Onshape capabilities like SolidWorks endured over the years because PTC's positioning will be that we have the best of two different worlds. Creo and Windchill are best in class in the on-premise world, and Onshape CAD and PLM are best in class in the pure SaaS world.
It's happened time after time that disruptive new technologies gain traction first in the SMB space, where customers generally have more flexibility to switch, and then proceed upmarket over time. We expect that any SMB buyer who looks at Onshape will stop dead in their tracks due to its amazing capabilities, plus all the fundamental SaaS advantages it offers. I'm referring to cost of ownership, support for any type of client device, including phones and tablets, ease of getting started, collaboration that works like Google Docs, and plus, no need for upgrades and patches, no file servers, and so forth. Of course, in addition to SMB customers, Jon's going to take orders from companies of any size, because in the long run, the SaaS benefits are even more pronounced at the high end.
Like salesforce.com, we expect to get there over time, and believe the high-end competition will be very vulnerable to what Jon and his team have built. That's why we all have the axiom that death comes from below in the software industry. I want to stress that PTC remains 100% committed to long-term aggressive development of Creo and Windchill. We want to be best in class with either deployment model. We will continue our pursuits of real-time simulation, generative design, additive manufacturing, IoT and AR infusion, and all the other great things that we've been working on with Creo and Windchill. In parallel, I expect you'll see many of the same capabilities appear in Onshape, and surprisingly quickly, given the fundamental innovation velocity of the SaaS model.
When the day comes that any Dassault, Siemens, Autodesk, or PTC customer wants to move to SaaS, we will be there, ready to guide them. Our real focus in the near term and midterm is on playing our strong new hand in the growthiest part of the market, where we simply don't show up today. If you back up to 50,000 feet, you can see that Onshape represents a huge and invaluable injection of SaaS technology, business processes, know-how, and culture into PTC. Onshape will dramatically expedite PTC's own transformation to SaaS. The industry is most certainly headed there, and PTC is now positioned to pave the path with Jon and his team out front leading the way. I think this acquisition, PTC's biggest ever, will transform the industry while both solidifying and accelerating PTC's long-term growth opportunity in CAD and PLM.
We're extremely excited to welcome the Onshape team to PTC. With that, I'll turn it over to Kristian to comment on financials and guidance.
Thanks, Jim. Thanks, Jon. Good afternoon, everyone. Before I review our results, I'd like to note that I'll be discussing non-GAAP results and guidance, all growth rate references will be in constant currency. As Tim mentioned earlier, we adopted the new revenue recognition standard ASC 606 under the modified retrospective method on October 1st, 2018. For year-over-year comparability purposes, I will be discussing our results under ASC 605, unless otherwise stated. Please note that this will be the last quarter we report results under both accounting standards. The guidance provided today will be under the ASC 606 standard. Our guidance assumes that the Onshape acquisition closes in November following normal regulatory approvals and certain closing conditions. Let me start off with a review of our fourth quarter results.
I'm going to keep my remarks brief, hitting just some key highlights, and ask investors to refer to our press release and prepared remarks documents available on our IR website for additional details. Q4 bookings of $150 million were above the high end of guidance and included a megadeal with Rockwell Automation. Excluding the megadeal, bookings would have been well within our guidance range. Q4 ARR per the new definition was $1.116 billion, and at our guidance FX rate was $1.134 billion, representing 12% year-over-year growth, which was in line with the guidance we outlined in our September preview. Our fiscal 2019 new ACV and churn results were also consistent with the guidance provided in the preview. As Jim mentioned earlier, ARR in our growth businesses was up 28% year-over-year at constant currency, which was slightly below the outlook we provided in September.
It's important to note that bookings in our growth businesses were up over 50% year-over-year in Q4. Because we closed a higher number of ramp deals than anticipated and had a number of other deals with fiscal '20 start dates, our Q4 ARR growth was slightly below our target. However, we now have even more IoT and AR backlog to support what we are expecting to be ARR growth well above market growth rates in fiscal '20. Total Q4 revenue of $335 million was up 9% year-over-year, despite a 1,300 basis point increase in subscription mix. Operating margin of 22% was at the high end of guidance and was an increase of 100 basis points year-over-year. Lastly, EPS of $0.45 was within our guidance range.
Moving on to the balance sheet, in Q4, we used $25 million to repurchase 378,000 shares, and we repaid $30 million on our revolving credit facility. Finally, on our Q4 results, FY 2019 adjusted free cash flow of $245 million was $15 million below guidance due to several one-time items, including FX impact of approximately $6 million, collections received on October 1st versus September 30th of about $5 million, and taxes associated with increased invoicing of about $6 million. Now turning to guidance, and as a reminder, we provided changes to our new reporting and guidance approach in the FY 2020 reporting metrics preview we filed in a September 5th 8-K, which you can also find on our IR website. The primary motivation for the changes was our subscription business model transition.
We completed the transition of our selling motion early in fiscal 2019, and we still have work to do and opportunity for improvement as we continue to transition our customer engagement model to the subscription mold. A secondary motivation was the adoption of ASC 606, which for on-premise subscription companies, reduces the utility of traditional financial measures for understanding business performance. As such, we encourage investors to assess PTC's business performance using ARR and free cash flow as the primary top-line and bottom-line measures. We will be providing annual guidance for these measures. From an income statement perspective, we're also providing annual guidance, but due to a number of factors that can drive significant revenue, and therefore EPS variability, you should expect wider than normal guidance ranges.
These factors include subscription term length, timing of new and renewal bookings, the quarterly spread of new and renewal bookings, conversion of ratable support streams to subscription contracts subject to ASC 606 revenue recognition, and any potential changes in revenue recognition under 606 from more upfront to ratable recognition resulting from continued investments in cloud-related functionality in our products. Again, just to highlight the point that we believe ARR is a more meaningful measure than revenue on how the economics of the business work, at the midpoint of our guidance range, we're expecting an approximately $150 million increase in ARR, which will result in a revenue increase of approximately $250 million in recurring software revenue. To the extent that we recognize more upfront revenue in fiscal 2020, we would expect revenue to decrease in fiscal 2021. Now for the specifics.
Beginning with ARR per our new definition, for FY 2020, we're expecting a range of $1.25 billion-$1.28 billion, or 12%-15% growth. ARR guidance includes approximately $10 million of ARR or one point of growth from the Onshape acquisition. Seasonally, we expect ARR growth to be below the low end of the guidance range in the first part of the year and increase throughout the year. This increase is driven primarily by our backlog of committed ramp deals, booked in prior periods. Turning now to adjusted free cash flow. For fiscal 2020, we're expecting a range of $255 million-$275 million, which includes approximately $65 million of short-term cash-related items impacting fiscal 2020 results.
These factors include an increase of approximately $25 million in cash taxes related to the significant projected increase in fiscal 2020 operating income under ASC 606, an increase of approximately $25 million in interest related to the debt associated with the Onshape acquisition, and currency headwinds of approximately $15 million. While these incremental cash items are near-term headwinds to our normalized free cash flow targets, they are transitory, and we do not expect them to impact our long-term targets. We will provide more detail on our long-range plan in just a few weeks at our November financial update webcast. Turning to the P&L guidance for fiscal 2020, we're expecting total revenue of $1.41 billion-$1.51 billion and non-GAAP EPS of $1.95-$2.60. Operating expenses are expected to grow approximately 9% year-over-year.
While this is slightly above our normal rule of thumb where we target OpEx growth at about half the rate of ARR growth, the slightly elevated expense run rate is due to the Onshape acquisition, and we expect the run rate to decline in the latter half of fiscal 2020 following realization of cost synergies and operational efficiencies that will be implemented in our second fiscal quarter. With that, I'll turn the call over to the operator to begin the Q&A.
Now it's time for the question answer session of today's call. If you would like to ask a question, please press star 1. Please make sure that your phone is unmuted. If you wish to withdraw your question, you can press star 2. Please limit yourself to only one question. If you have additional questions, please return to the queue. Thank you. First question comes from Matt Hedberg from RBC Capital Markets. Your line is open, sir.
Hey, guys. Thanks.
Thanks, Matt.
Congrats on Onshape. I had two somewhat related questions on the deal. First of all, do you have a sense for how many of your customers have expressed interest in a SaaS-based offering? I'm trying to get a sense for that customer migration over time from Creo and Windchill to Onshape. Secondarily, I think you noted you're going to continue to invest in CAD and PLM on your legacy products or your core products. How should we think about that gap in functionality closing over time if, in fact, the SaaS-based CAD market is growing as rapidly as you suggest?
Yeah, Matt. Jim here. We did, as I mentioned, commission McKinsey to do a study during our diligence phase here to replace, let's say, anecdotal data with quantitative data. McKinsey did a study of around 230 customers. They reported a very strong interest in the concept of SaaS. Some concerns that SaaS products weren't mature enough yet. Always some concerns about switching costs, and the larger the enterprise, the stronger that concern. Huge amount of interest. Now I would say, one of the things PTC came to realize is that this Onshape product is actually much better than we thought it was, much more advanced than we thought it was. We sort of think that the world hasn't processed how fast this product changes.
While we, PTC, were talking to the Onshape guys, they did their 101st, 102nd, and 103rd upgrade of the entire customer base. There's an innovation velocity here that's amazing, and I think it's probably fair to say that Onshape is a mid-range product today, but on a very fast improvement vector. We at PTC would be incented to offer up any of the great technology we might have to put into that improvement vector. This is a product that's better than most people think it is and improving extremely fast, and there's a very large amount of interest. Again, the kind of punchline result of the study, if you will, from McKinsey was that they think that we'd see a 35% CAGR over what's there today, and that would lead to slightly under 20% market penetration by true SaaS in the next five years.
Next question comes from Jay Vleeschouwer from Griffin Securities. Your line is open.
Thank you. Good evening. Hey, Jon. How are you? Question for you, Jim, tying back to your keynote address at LiveWorx back in June. The Onshape acquisition is fascinating for any number of reasons, and I'd like to put it in the context of what you spoke about four months ago, namely your closed-loop lifecycle management strategy, which you've talked about for a number of years. You've made some progress there. How do you see Onshape fitting into that larger vision that you expressed at that time, not just for CAD, but perhaps for the broader portfolio in terms of technology and customers' processes?
Yeah. I think, Jay, in simple terms, we will attempt to create two versions of that strategy. One that runs on-premise and one that runs in the cloud. Of course, we already have the one on-premise. As Onshape matures, we will try to create all the goodness that PTC has on-premise in that SaaS world as well. At some point when customers say, "Hey, I want to learn a little bit more about SaaS," we want to be head and shoulders ahead of everybody in terms of providing a very mature, proven, full-function capability, not just for CAD and PDM and collaboration, but the closed-loop ideas, the augmented reality ideas, the IoT ideas that you saw me show in that keynote, by the way. It's very exciting.
In fact, that keynote, you might have noticed, won me visionary of the year designation from one of the analysts in this market. We just want that visionary capability to embrace the SaaS model. That's really where we're going with this.
Next question comes from Ken Wong from Guggenheim Securities. Your line is open.
Great. Thanks for taking my question, guys.
Hey, Ken.
Hey, how's it going, Jim?
Good.
I just had a kind of a clarification question. I just want to understand the dynamics of that Rockwell megadeal. I think it mentioned there was this kind of credit against the minimums for fiscal year 2020. Just wondering how we should interpret that. Does that mean the relationship kind of is tracking below the minimums? Is there an ability to get that back on track, or am I interpreting that wrong?
Yeah. Hey, Ken, it's Kristian. You can't infer much from that transaction other than actually things are going well, and to infer more than that isn't possible, and because of confidentiality agreements we have with Rockwell, we don't really intend to disclose more.
Next question.
Partnership's going well.
Next question comes from Ken Talanian from Evercore ISI. Your line is open.
Hey. Thanks for taking the question. I was wondering if you could give us a sense for how you're thinking about growth in CAD, PLM, and separately, IoT, relative to the high and low end of your fiscal 2020 ARR guidance.
Sure. I think in general, we would expect that CAD and PLM will continue to outpace market growth rates. We actually expect IoT to end up significantly outpacing market growth here in fiscal 2020, again, due to some of the factors that I outlined in my prepared comments.
Right. I think-Probably CAD and PLM growth, in the range, perhaps a little less than where they are this year, but to add some conservatism. If you take that IoT business growing much faster, growing at the rate we've guided, you add in a point from Onshape, you take down probably the 10% in the FSG group. I'm not sure we're planning to do 10% again. I hope we do, but I don't know if we'd guide to that.
Nope.
You run some models around that, and you're going to land in that range, and maybe even near the upper end of it. Our view is that range contains a notch or two of conservatism in case the economy actually gets worse than it is at this moment and than it has been in 2019.
Next question comes from Saket Kalia from Barclays Capital. Your line is open.
Hey, Saket.
Hey, Jim. Hey, Kristian. Thanks for taking my question here. Congrats on the deal. Kristian, maybe just one for you. I hate to bring in the ASC 606 accounting item, but obviously, ASC 606 Rev Rec here is going to make revenue a little lumpier to your point, and that can be even more magnified by large multi-year deals. I think you talked about the wider range for income statement guidance, which we've seen other companies do as well. Can you just touch broad brush on some of the assumptions that you made in the revenue guide as it relates to some of those large multi-year deals, which again, can be very magnified when it comes to Rev Rec?
Yeah. I think as it relates to the, we'll call it the large portion, we're not really anticipating any significant change in the overall, we'll call it, size of those businesses. I think probably the bigger question is what happens to the term lengths, particularly on both new and renewal bookings. The assumption that we're using in the guidance is that we would expect modestly increasing length of term of contract, particularly on the renewal side. That's probably one of the bigger factors, is really the term length. Of course, as you know, Saket, by eliminating that cancellation clause, which we think was an appropriate move, that immediately doubled the length and effect of all new transactions. It took those things from one year to two, and in some cases, it'll be three.
I think the key thing is just that this number's going to jump around a lot. We're going to have a bang-up year in revenue growth, and I promise you, we're not going to brag about it. The better we do this year, the more it's going to come out of the future. In the end, the business is the same. It's just moving it from year to year based on revenue recognition rules. I promise we won't gloat this year, and then you got to promise to remember next year that we didn't gloat this year.
Next question comes from Joe Vruwink from Baird. Your line is open.
Good afternoon. Congrats to both teams on the acquisition. Jim, your commentary was interesting just in the context PLM with a strong quarter, CAD having a sequential rebound, mega deals in IoT, and all of this is coming in the context of a weakening macro. I'm just wondering if you could maybe reconcile the two dynamics, and then as a quick follow-up, whether you saw any change in customer spending behavior as the quarter went on. Thank you.
Yeah. Actually, Joe, it's interesting because the PMI number, as you probably know, is in the worst place it's been since 2009. It doesn't feel like that out there. Unemployment's at a, I don't know, I think I heard 50-year low, which doesn't reconcile with the PMI being where it was in 2009. Number one, this downturn feels a little different somehow. The second factor is that we are convinced our growth businesses are secular, not cyclic. We also think that a growing amount of what we sell is potentially more interesting when faced with a difficult spending environment. When companies buy our IoT technology or our AR technology and deploy it, for example, in a factory, they do that to save money. I think that won't go out of style in a downturn.
It is a bit inexplicable, but feels quite good that in the face of what really looks like a difficult economy, PTC just posted the best year in the 21 years I've been here. I feel good about that, and we've allowed for some conservatism in our guide just in case. I hope we don't need it.
Next question comes from Adam Borg from Stifel. Your line is open.
Hey, guys, thanks for taking the question. Maybe just want to dig into Creo Simulation Live. It's great to see continued progress there. Just maybe two parts. One, is there an opportunity to embed that into Onshape? Two, as you think about the overall CAD install base of design engineers, what % do you think is really addressable by a technology such as this? Thanks so much.
Yeah. Let me take a stab at that and maybe, Jon, you can add some thoughts on the second one. With respect to Creo Simulation Live, for everybody's benefit, that's Ansys technology embedded in Creo, and it's really starting to get some momentum. Of course, we've not been able to talk to Ansys about it because you can't really do that before you announce such an acquisition. We only announced it this afternoon. It's certainly a conversation we should go have with Ansys, and I can't comment. We would need their permission to extend that right and so on and so forth. Definitely having capabilities like Creo Simulation Live in Onshape, I have to think would be very interesting. Let's call it live simulation. The second thing, the install base.
What the McKinsey study told us was that there's about 35% of the market that wouldn't find SaaS interesting at all, meaning 65% of the market actually has some level of interest. We think that two things. Number one, the growthiest part of the market, where the most new seats are sold, is really the SMB space where PTC doesn't play. It's the domain of SolidWorks and Inventor. I think Onshape's in a good position to win a good share going forward, expanding over time, but win a good share of those new seats being sold. The second thing is, I think Onshape goes beyond that and is a disruptive technology, a technology that will convince people to switch. Of course, smaller companies have more flexibility to switch, but arguably, larger companies have more reason to switch.
You got to balance the goodness of switching with the switching costs and so forth to execute the switch. That's why I think death comes from below. Disruption tends to happen lower in the market and move up over time as people get more comfortable with it. I don't know, Jon, anything you want to add to that?
No, I think that was a great answer.
Great.
Next question comes from Steve Koenig from Wedbush Securities. Your line is open.
Hey, Steve.
Hi, PTC. Thanks for taking my question. I'll just focus here on Onshape. Welcome to Jon. Maybe just a few, I'll call them a set of related questions that creates one question. On Onshape, on the guidance for 1 point of contribution to ARR growth, is that a pro forma? Is there more revenue there that's somehow not getting counted next year? I'm trying to relate that to your purchase price. If not, your conversation about a 35% growth rate in the market, should we expect that Onshape is ramping significantly faster than that? I'll just put it out there. Any comments on how Onshape competes or differentiates with Autodesk Fusion? Also comments on what channel will you use to sell it. Is there an existing Onshape channel, or will you be building one? What's the go-to-market going to look like?
Thanks, and that's all I have. Thanks very much, guys.
Okay. No problem. Jon, let me hit the first couple, and then maybe you can pick up the competitive one.
Great.
The 1% ARR growth, 100 basis points, is taking what Onshape is already doing, plus the growth we're projecting, and simply adding it into PTC's plan for what, 11 months, Kristian? You're right about that math. Onshape has been growing much faster than 35%, and frankly, I hope they continue to do so. Within a market that's growing 35%, of course, we are in a position, I think, to take quite a bit of share. I don't think you should think that our plan would necessarily be 35%, but you should think that the market, per this one study, would support aggregate growth of 35%. You want to hit the competitive?
Happy to. Steve, you mentioned competitive position with Autodesk. I think their vision aligns with ours. They say that the cloud is the future, SaaS is the future. They don't back it up with the goods yet. Our view, as Jim said, we align completely on the idea that you have to have a pure cloud, pure SaaS platform and offering. Autodesk today offers a partial solution. Now, whether you're mixing installed software with partial cloud services and so forth. Those strategies are not things that we believe are the way to deliver the value we seek to deliver to customers. We think we have a big advantage there.
Yeah, let me add to that. Our studies showed that Onshape pretty much goes toe to toe with features and function against SolidWorks, but beats them for anybody who wants SaaS, because SolidWorks doesn't have SaaS. Our study said that against Fusion, it's a much cleaner, better, more complete SaaS model and blows them away on functionality. We think we're in a very good, strong competitive position against both of those with the Onshape technology. With respect to the channel, one thing that PTC has, which could prove very helpful here, is a channel that lives in the bottom half of the market, or at least let's say in the middle part of the market and could go down market.
Under NDA, I've had the luxury of running the Onshape technology past some of our channel partners as part of our diligence, and they're very excited. They feel like once upon a time, Dassault had SolidWorks in one hand and CATIA in the other, and that was a tough left-right punch against PTC. We sort of have that against SolidWorks now. You want to go simple SaaS, that model, we've got a great product. You need more features, we have Creo and all the wonderful things we've been doing there. I think we need more time to plan what role our channel will play here, but I think it's definitely an asset that is going to prove to be very important as this picture unfolds over time.
Next question comes from Yun Kim from Rosenblatt Securities. Your line is open.
Thanks.
Hey, Yun Kim.
Hey, guys. Congrats on the deal, Jim. On your core business, I'm just going back to the basics here, but on your core business, how much of your IoT and AR business is generated within the core CAD and PLM install base? Along that line, if you can just give us at a high level, at least, how much of your IoT and AR business is driven by the Rockwell Automation partnership today. Just to get a better understanding of where the IoT and AR growth opportunity is in the near term.
Kristian, do you have data on the first one?
We'll get it.
Yeah, I think I can only give you estimates on both of those. Well, I probably know the second one, but on the first question, how much of IoT and AR is sold into our install base, CAD and PLM? I'm going to probably say 60%.
I would say half, yeah.
Yeah, 50%, 60%. On one hand, we have those relationships, they're extremely useful. On the other hand, we're winning in all kinds of accounts because we're a little bit uncontested right now. We're also trying to go, and having success going well beyond the install base. Of course, as I mentioned, what Rockwell sells is well beyond the install base. Right. On the second question, how important is Rockwell? Rockwell would be a single-digit percentage of what we're doing right now, but growing quickly. They've gone from not part of our strategy to a small part at this moment, but it's a small part growing at a high rate and should become increasingly material as we go forward. I can imagine Rockwell getting up to be double digits and, I don't know, maybe down the road somewhere, a quarter of our business.
They have a massive install base. They have a very high win rate. They're having good deployment success. The future with Rockwell looks very promising.
Next question comes from Sterling Auty from J.P. Morgan. Your line is open.
Hey, Sterling.
Yeah, thanks. Hi, guys. Hey, I want to go back and put a finer point on Steve Koenig's question. With Onshape, if it's 1%, it sounds like this is about a $10 million revenue generator in terms of where Onshape is. If I take 5,000 or so subscribers times the printed pricing, that kind of supports that idea. For $470 million net cash, that's a big multiple to pay. I don't think anyone disagrees that they've got the leading technology on the market, but they've been around for a number of years, and we're seeing slow adoption at this point. Just to play devil's advocate, what was the buy versus build decision? $470 million.
Yeah.
invested internally.
Yeah, Sterling, that's a good and fair question, and the buy versus build is a good place to start. It cost Jon, with an incredible team of the best guys in the industry, six or seven years and $100 million to get where he is right now. For me, it would be a little harder to do that entrepreneurial efficient thing. Our estimate is it would take us at least five years and several hundred million dollars to build what he has. There are several hundred million dollars of synergy here. Now, the second thing I'd tell you about the price is, it is a unique asset. It's the only one out there, which gives Jon, of course, some negotiating leverage.
Another point is it's the same revenue multiple that we paid for ThingWorx, and it's the same revenue multiple that Dassault paid for SolidWorks at the same size if you adjust the difference between multiples on perpetual versus multiples on subscription revenue streams, ARR streams. I think you and I both would agree that a $100 million ARR stream is worth more than a $100 million perpetual one-time stream. If you take the difference in those multiples and gross up what Dassault paid for SolidWorks by that factor, you get to what we paid for Onshape. I think I can triangulate on this many different ways, and I think this is a very good buy at this price. It's a win-win for both parties.
Next question comes from Tyler Radke from Citi Investment. Your line is open.
Hey, Tyler. You might be muted.
Sorry about that. Can you hear me now?
Yeah.
Yes.
Sorry about that. Hey, thanks for taking my question. I got two questions. I'll try to fold it into one here. Just at a high level Jim, obviously nice to see some of the reported metrics come in line or ahead of plan this quarter. I guess just more broadly, how do you feel about execution and sales capacity? As a follow-up for Kristian, I think you mentioned kind of a gradual ramp in the ARR growth as we go into next year. Just curious if that's a function of what you're seeing in the macro environment or if there's something else we should be thinking about. Thank you.
I think on the execution side, Q4 was a solid quarter. We didn't have to make a lot of excuses. You can take the megadeal out, it was still a solid quarter. I think we feel pretty good about no surprises in Q4. It went more or less like we expected it to, I think we feel pretty good about the forecast going forward. We have a strong pipeline, lots of momentum, lots of good stuff happening. I don't know. I think we were all stressed, particularly 90 days ago, certainly the past 90 days have been a good 90 days. Kristian?
Yeah. Again, just on the seasonality on the ARR, remembering that that is the entire, we'll call it stack of customer arrangements that we have. As such, you need to consider the, we'll call it rate of new bookings, the expiring base, kind of churn, and looking at those variables, and then also understanding the committed ramps as those layer in throughout the year, and even deals that were booked with start dates throughout the year, understanding how those layer in. That's how we get to that range, 12%-15% for the year. As I said, I think we're going to start the year below that range, and it'll ramp throughout.
Right. I want to add maybe just some color to something Kristian said. He used this term backlog, and what he's referring to is we are sitting on signed contracts right now that, for example, may ramp up a big notch in Q3 or Q4. We don't have to go win that business. We just have to wait for Q3 or Q4 to get here, and it kicked in. That's one of the reasons why we see this ramp is because we're sitting on a fair amount of already closed business that does not count in Kristian's new definition of ARR because it hasn't started yet. It's really a combination of overlaying the backlog we're sitting on with the forecast we're looking at and seeing that seasonal shape.
This will be the last question. After the question, all callers please remain on the line for closing comments from CEO Mr. Jim Heppelmann. Last question comes from Jason Celino from KeyBanc Capital Markets.
Hey, guys. Thanks for fitting me in. I wanted to kind of unpack the IoT ARR growth in the quarter. 28% constant currency, still very good, above market rate, but a little bit more deceleration than I expected. I appreciate the full backlog we have, and that's encouraging, but can we just kind of unpack your Q4 a little bit?
Really, you have to unpack bookings from ARR. Remembering that for our definition, ARR is, again, the full annualized contract value of all the contracts that we have at the end of the period.
That are active.
That are active. That's what we ended up with in terms of year-over-year growth, the 28%. Also remember that what I said was we had a very good bookings quarter for IoT in Q4, and a good chunk of those bookings have start dates that are in fiscal 2020. In addition to that, we also have previously committed ramp deals as well as some other ramp deals that were booked in Q4, which pushes the ARR really into 2020, and we would expect a pretty significant increase in ARR above market growth rates in 2020 as a result of timing of how that ARR flows through.
Yeah, I think just if I could add two cents to that, Jason. Kristian mentioned very strong bookings, if you remember, our business is really back-end loaded in the quarter. If we do a good size deal in the last week of the quarter, it's highly unlikely that deal's going to start in that same week. If it starts next week, I'm sorry, it's a backlog. Really, what we need to do is to try to estimate how much of the deals will start in the same quarter they're purchased. First we have to win the deals, secondarily, we have to try to estimate the start date in order to understand will it be in the ARR or will it be backlogged and it'll jump into the ARR in a coming quarter.
What really fundamentally is the deal here is more of it ended in backlog than in ARR, but that sets us up nicely for next year. Okay. I think that's the end of that. I want to thank everybody for joining the call and spending an hour with us this afternoon. Again, in summary, it's a challenging macro environment, but we closed a strong year of ARR growth. The IoT and ARR business are working well. The core CAD and PLM business are working well. The Focused Solution Group business had a pretty strong year, actually. All of that against this backdrop. On top of that, Onshape has entered our lives here, and it is clearly going to be a new growth engine, but also a longer-term path to a SaaS future. There's a lot here at PTC that we're proud and excited about.
If you get a chance to join us on the November 18th webcast, we're going to take you into much deeper detail, particularly around the long-range plan and free cash flow and all the puts and takes and assumptions and sensitivities and so forth. We'll try to give you a good, clear view on how doable that is, and I think you're going to like the answer. If you can't join then, I'll look forward to talking to you in 90 days if we don't happen to cross paths sooner. Thanks for joining us. Bye-bye.
That concludes today's conference. You may disconnect at this time, and thank you for joining.