Ladies and gentlemen, thank you for standing by, and welcome to the third quarter 2020 Sturm Ruger earnings conference call. At this time, all participants are in listen only mode. After the speaker's presentation, there will be a question- and- answer session. As a reminder, today's program is being recorded. I would now like to introduce your host for today's program, Chris Killoy, Chief Executive Officer. Please go ahead, sir.
Good morning, welcome to the Sturm, Ruger & Company third quarter 2020 conference call. Before we get started, I would like to ask Kevin Reid, our General Counsel, to read the caution on forward-looking statements. Kevin?
Thanks, Chris. We want to remind everyone that statements made in the course of this meeting that state the company's or management's intentions, hopes, beliefs, expectations, or predictions of the future are forward-looking statements. It's important to note that the company's actual results could differ materially from those projected in such forward-looking statements. Additional information concerning factors that could cause actual results to differ materially from those in the forward-looking statements is contained from time to time in the company's SEC filings, including, but not limited to, the company's reports on Form 10-K for the year ended December 31st, 2019, and of course, on the Form 10-Q for the third quarter of 2020, which we filed last night. Copies of these documents may be obtained by contacting the company or the SEC, or on the company website at ruger.com/corporate, or of course, the SEC website at sec.gov.
We do reference non-GAAP EBITDA. Please note that the reconciliation of GAAP net income to non-GAAP EBITDA can be found in our Form 10-K for the year ended December 31st, 2019, and again on our Form 10-Q for the third quarter of 2020, both of which are posted on our website. Furthermore, the company disclaims all responsibility to update forward-looking statements. Chris?
Thank you, Kevin. Before we discuss our third quarter results, I want to provide an update on the impact that the coronavirus pandemic, or COVID-19, has had on Ruger. The COVID-19 pandemic continues to cast uncertainty throughout the global economy. Nevertheless, any adverse financial impact on our business resulting from COVID-19 was negligible in the third quarter of 2020. Since its onset in March, we have remained proactive in maintaining the health and safety of our employees and mitigating its impact on our business by providing all hourly employees with an additional two weeks of paid time off, encouraging employees to continue to work remotely wherever possible, maintaining social distancing throughout each manufacturing facility, including every manufacturing cell.
Confidentially communicating with and assisting employees with potential health issues through our dedicated facility nurses, restricting visitor access to minimize the introduction of new people to the factory environment, implementing additional cleaning, sanitizing, and other health and safety processes to maintain a clean and safe workplace, and manufacturing and donating personal protective equipment to local hospitals, healthcare facilities, and police and fire departments in our local communities. The cost of these actions are expected to total approximately $3.5 million in 2020, of which approximately $2.4 million has already been recognized. We have also realized some expense reductions and deferrals in certain areas of our business, including conference and trade show participation costs, travel expenditures, sponsorships, and advertising. These expense reductions and deferrals, which approximate $2.2 million, largely offset the incremental COVID-19 costs.
We suspended hiring from the onset of COVID-19 in March until June, when we resumed hiring at a modest rate to ensure the health and safety of everyone involved. This action may have hampered our ability to ramp up production, but the long-term benefits of maintaining a healthy workforce and clean facilities far outweigh any short-term adverse impact on our operations. It was the right thing to do, and we will continue to keep the health and safety of the Ruger team as our paramount priority. I'm happy to report that despite the self-imposed limits on the size of our current workforce, the hard work and commitment of our dedicated employees allowed us to increase production 15% from the prior quarter and 50% from the third quarter of 2019. The future impact of COVID-19 remains unknown.
We have been fortunate to have only limited restrictions on our operations thus far. Our financial strength, evidenced by our debt-free balance sheet, provides financial security and flexibility as we continue to manage through this crisis and focus on our long-term goals and creation of shareholder value. Now I'd like to ask Tom Dineen, our Chief Financial Officer, to give an overview of the third quarter financial results, and I will discuss the current market and update you on our operations and the recent approval of our offer to purchase Marlin's firearms assets. We'll get to your questions. Tom?
Thanks, Chris. For the third quarter of 2020, net sales were $145.7 million, and diluted earnings were $1.39 per share. For the comparable prior year period, net sales were $95 million, and diluted earnings were $0.27 per share. For the first nine months of 2020, net sales were at $399.6 million, and diluted earnings were $3.31 per share. For the corresponding period in 2019, net sales were at $305.4 million, and diluted earnings were $1.37 per share. The 53% increase in third quarter sales and reduced reliance on sales promotions were the main drivers of our significantly improved earnings, which were more than 5x greater than last year. The balance sheet. At September 26th, 2020, our cash and short-term investments totaled $133.6 million. Our current ratio was 3.2:1, and we have no debt. Our current cash balance is approximately $150 million.
At September 26th, 2020, stockholders' equity totaled $241.3 million, which was reduced by the $88 million special dividend paid in August. This equates to a book value of $13.79 per share. Cash generated by operations during the first nine months of 2020 was $82 million. Cash returned to shareholders. In the first nine months of 2020, the company returned $104.1 million to its shareholders through the payment of dividends, reflecting the customary quarterly dividends and the aforementioned special dividend of $5 per share. Our board of directors declared a $0.56 per share quarterly dividend for shareholders of record as of November 13th, 2020, payable on November 27th, 2020. As a reminder, our quarterly dividend is approximately 40% of net income and therefore varies quarter to quarter. That's the financial update for the third quarter. Chris?
Thanks, Tom. Demand. Consumer demand, which began to surge in the latter stages of the first quarter, continued to intensify in the third quarter. The estimated unit sell-through of Ruger products from the independent distributors to retailers increased 50% in the first nine months of 2020 compared to the prior year period. For the same period, the National Instant Criminal Background Check System background checks, as adjusted by the National Shooting Sports Foundation, commonly referred to as adjusted NICS, increased 68%. These staggering increases are attributable to increased consumer demand for firearms and have likely been constrained due to limited available inventory in the distribution channel.
The surge in consumer demand likely continues to be driven by the call by some for the reduction in funding and authority of law enforcement organizations, protests, demonstrations, and civil unrest in many cities throughout the U.S., and concerns about personal protection and home defense stemming from the continuing COVID-19 pandemic. In August, right in the middle of our third quarter, the National Shooting Sports Foundation, our industry trade association, released an updated report that concluded that nearly 12.5 million Americans had purchased firearms this year alone. The survey showed that 40% of those purchases were by first-time gun owners. Think about that. Approximately 5 million Americans entered the firearms market for the first time in 2020. That is a tremendous opportunity for growth in our industry. Female consumers represented almost 40% of those new gun buyers.
We are also seeing increases in hunter education, hunting license sales, and participation in programs like the NSSF's Field to Fork program. We are excited for the future, and certainly increased participation in firearms ownership might have come about due to the pandemic or civil unrest. What we are starting to see now is a stickiness amongst new and established consumers who are enjoying all aspects of our industry, from personal defense to hunting, to plinking and competitive shooting. We believe that the future is bright. New products. Sales of new products represented $88 million, or 24% of our firearm sales in the first nine months of 2020.
New product sales include only major new products that were introduced in the past two years, which include the extremely popular Ruger-57 pistol, which was recently awarded the 2020 Caliber Award for best overall new product by the Professional Outdoor Media Association in conjunction with the NASGW. The LCP II in 22 Long Rifle, which is based on the venerable LCP and LCP II platforms, utilize our Lite Rack system, allowing for easier slide manipulation for those with weakened hand strength and providing a lower recoil platform for comfortable training or shooting at the range. The Wrangler Revolver, our latest take on the classic single-action revolver, which has taken off even more than we could have hoped and also provides a fun way to enjoy a day at the range or introduce new shooters to the sport.
Lastly, our two pistol configurations based on existing firearms, the PC Charger and the AR-556 pistol. These products both represent a response to market demand for this new style of pistol. We are very excited about the reception of these new platforms. Even in this current market, the consumer and media reception for these lines is impressive and keeps us excited for the future. As a reminder, derivatives and product line extensions of mature product families are not included in our new product sales calculation, but they provide a great value to our distributors, retailers, and our loyal Ruger customers. With the ferocious pace of business in the third quarter, we intentionally focused on high-demand core product lines and therefore only launched four new models and seven new distributor exclusives. This brings our total number of unique firearms offerings to over 900 different models, which is still very impressive.
Please note our engineering teams have not taken their foot off of the gas pedal in 2020. We are developing exciting new products and have taken the opportunity to queue up a variety of new platforms, products, and models heading into 2021. I look forward to providing updates when we get closer to launching these innovative new firearms. Production and inventory. The incredible surge in demand again outstripped our production capacity during the third quarter. As a result, the combined inventories in our warehouses and at our distributors decreased 27,000 units. To put this in some context, this combined inventory is down over 300,000 units compared to the end of the third quarter last year. Although we do not have comprehensive inventory data available at the retail level, the information available suggests that the retailer inventory of Ruger, as well as most other firearms brands, remains largely depleted.
I mentioned earlier that we had suspended hiring from March until June and had limited the rate at which we were bringing new folks on board. Despite these limitations, I am happy to report that our hiring efforts have allowed our current headcount to increase by over 140 employees since the end of the second quarter, allowing us to increase production at all facilities to better help meet demand. Capital expenditures. Capital expenditures in the first nine months of the year were $8 million. The lion's share of these investments relate to new product development and targeted capacity expansions for some of our product families in the greatest demand. Now I'll talk about Marlin.
As many of you are likely aware, our offer to purchase some of the Marlin assets in conjunction with the Remington Outdoor Company bankruptcy proceeding was accepted by Remington and approved by the bankruptcy court in late September. We are very excited to broaden our catalog of rugged and reliable products with the addition of Marlin firearms, and the loyal Marlin customers are excited too. We have been bombarded with overwhelmingly positive emails and phone calls since the announcement of our pending purchase, reinforcing our assertion that the Marlin lineup is an excellent fit for Ruger. We anticipate closing on this purchase in the fourth quarter of 2020. We will focus on getting the Marlin lines up and running in our existing Ruger facilities. We look forward to reintroducing shooters to Marlin rifles in the second half of 2021. Operator, may we have the first question?
Ladies and gentlemen, once again, if you have a question at this time, please press star then one. Our first question comes from the line of Ryan Hamilton from Morgan Dempsey. Your question, please.
Congrats on the quarter.
Thank you.
You're most welcome. Could you walk us through the cadence of the quarter, kind of what July looked like compared to June and so on?
You know.
Okay.
As you know, we typically don't disclose monthly sales data and such, frankly, the level of demand we saw throughout the quarter stayed constant. We did not see it necessarily accelerating or decelerating. We saw it constant right from beginning of July right through September.
Excellent. You talked a lot about safely bringing on new bodies, headcount to help on the manufacturing side. Are there any other constraints that you're seeing to increasing production? Maybe touch on commodities at all, commodity prices.
A good question. We haven't really seen any impact negatively in the way of commodity pricing or availability. We've had some limited interruptions from some of our suppliers who may have had COVID-related shutdowns or temporary constraints within their facilities. Other than that, we haven't seen anything in the way of either commodities or suppliers negatively impacting our production.
Great. As far as headcount goes, roughly where are you at right now?
We're, I think, last I checked, somewhere north of 1,700 employees. Somewhere between on or about 1,750 folks.
Great. What are the current shifts looking like? You don't have to walk me through each plant. Just give me a rough estimate as far as how things look, shift count and whatnot.
Well, of course, in a modern factory, it's not always as clean as first, second, or third shift. We've got, in some cases, as many as five different shifts for a given product line when we take into account weekend time and things like that. Depending on the product, depending on the demand, and how we can best accommodate the schedules in the factory and with our associates, we'll break those shifts up. Typically, all three of our major firearms factories are running, obviously, full first shift, second shift, and then some staggered shifts, depending on what we can do on the weekends and to be flexible in terms of additional capacity.
All right. You kind of just touched on the Marlin purchase at the end of your remarks there. Did I hear you correctly as far as your plan is to bring over all of their manufacturing into your current facilities?
Yes. The Marlin product line was split between the Ilion, New York facility, Huntsville, Alabama facility, and their wood shop in Lexington, Missouri. We're in the process of coordinating that move to move all the equipment, fixtures, tools, gauges, et cetera, into existing Ruger facilities.
One more from me, then I'll hop back on. Maybe we can touch on that just a little bit more. What kind of capacity were they at? Do you think that this will add additional capacity? Obviously, the new Marlin line will add capacity. Is there potential to add capacity to your current production using Marlin tooling and whatnot?
Yeah, that's obviously the plan. We've got a full slate of equipment, everything from CNC machines, and as I mentioned, fixtures, tools, gauges, et cetera, as well as the intellectual property, engineering drawings. While we still haven't closed the transaction yet, we're very excited that this will be incremental volume to our overall business. The important thing to consumers is that we plan to bring back Marlin to its former glory and continue to deliver some great products to our customer base.
Have you, and I know you can't touch probably a whole lot on this, have you been seeing a lot of inefficiencies just in the way that they had been running the business, where you think you can add a lot of value?
Well, I'm not really able to comment on how it was done under the prior regime. Of course, as they got closer to bankruptcy, they were constrained, I'm sure, by limited ability, limited capacity to produce. Obviously, given our capital structure, we're looking forward to a new day for Marlin in the Ruger facilities.
I couldn't agree more. I think it's a great move, and I think you guys will add a lot of value. I'll hop back in line. Thank you.
Thank you.
Thank you. Our next question comes from the line, Mark Smith from Lake Street Capital. Your question, please.
First off from me, can you talk a little bit about ASP? How much of that was mix versus price increases?
In the third quarter, none of it was related to price increases. That was all product mix, Mark, is where that came from. Just as things move around, in the Ruger product line, of course, you've got products such as the Wrangler Revolver at a value-priced, entry-level price point, all the way up to some other guns that are much higher priced. Depending on both the order book, when we look at ASP for orders and we look at the shipments, it moves around quite a bit.
Are there plans on taking price increases that you can talk about?
We did take a small price increase, effective the beginning of November. Most of that will be reflected in the fourth quarter.
Okay. Gross profit margin, obviously fantastic during the quarter. Can you just speak to sustainability of gross profit margins and anything that you can give us on your outlook there?
Well, as you know, we don't comment, make forward-looking projections and things of that nature. However, as we increase volume with any of our factories, our efficiencies increase. The other thing we're seeing is, in this environment where we're seeing continued sustained demand, the level of promotional activity is significantly scaled back. In addition to saving money on things like certain trade shows and travel, we've got a much-decreased need to discount or promote the products. That obviously has a positive effect on margins.
Okay. I know that you don't comment on cadence on demand and sales during the quarter, but can you talk about the production increases during the quarter and the cadence of that and maybe potential for continued increases in capacity?
Well, the biggest thing, as we said, we started our hiring efforts, turned them back on in June. With that, we've had a steady increase in our headcount at all of our facilities, trying to bring folks on safely, get those new employees up to speed on the shop floor, and get them productive. That increased throughout the third quarter, and I would expect that effort to continue as we go forward. Right now, our HR and operations folks are doing a great job bringing new people on in a safe fashion and trying to increase production where it makes sense.
Perfect. Just two questions on Marlin, as much as you can talk about that. You guys talked about CapEx, I think, being maybe roughly $20 million for the full year. If you can confirm that, how much of that, if any, is Marlin acquisition, some of that tooling and equipment that's in that number?
That $20 million CapEx figure is existing Ruger business, that's strictly related to existing Ruger facilities and primarily new product lines, as we talked about, and expansion of certain product lines. The Marlin transaction, none of that is reflected in the current figures. You may recall from the filings, that was a $30 million purchase price, of which we paid a small deposit, we've still got the balance of that to pay from our cash on hand.
Okay. Last one on Marlin. Any idea on maybe where the inventory stands today, at least out at distributor or retail? Do you see any issues in having that inventory gone and depleted by the time that you start producing new Marlin firearms?
I have to think most of that inventory is probably depleted already. If you look at the inventory at most of our distributors and retailers throughout the country, inventory, not just of Ruger firearms, who obviously we have better visibility of, but most firearms brands have been cleaned out at all levels of the channel. We think that that's probably likely the same scenario with Marlin, although we don't know for sure.
Okay. Sounds great. Thank you, guys.
Thank you.
Thank you. Our next question comes from the line of Rommel Dionisio from Aegis. Your question, please.
Thanks. Good morning, everyone. Chris, in your comments, you touched a little bit about upcoming new products. I just wanted to ask about that a little more. Just given how strong the demand is for your existing products, obviously including the new products launched within the last two years and that, as well as perhaps some limitations or whatever you want to call that because of COVID-19 in terms of the potential for marketing. I know SHOT Show is still scheduled for January, at least for now. Could you just maybe talk about how we should think about the cadence, just given that as we approach year-end and the beginning of the new year, that's typically when many new products are introduced. Do you think about maybe pushing that out a little bit?
Are you just maybe going to stick with the originally planned schedule, just given all these sort of moving factors? Thanks.
Yeah. Well, Rommel, you know we focus on the long term. Frankly, our new product schedule is going to be driven more by when those products are ready to launch. We've got a couple really cool products in the hopper. They're not quite ready for prime time. The SHOT Show window and the normal distributor show season of January, February, typically people see a lot of new product launches. As you know, with Ruger, a lot of times we'll do them second, third, or fourth quarter based on when that new product is ready. That's the same thing this year. We've got a couple great new products. We're going as fast as we can. If they're ready, we'll have them out in the January time period.
I think more likely it'll be driven by when we can make sure the guns are ready to go, and we have sufficient quantity for our distributors to have inventory when we make the announcement. Again, in this environment, we want to make sure that even though while we're focusing on maximizing production for existing product lines, our engineering teams are really shielded from that in the sense that they are going flat out to get those new products ready to launch. It's an interesting dichotomy. The new product teams are really paying no attention to the fact that existing products are selling at a rapid rate. They're going full speed ahead, and we'll be ready as soon as those products are.
Okay, great. Well, we look forward to seeing them. Thanks. Congrats on the quarter.
Thanks, Rommel.
Thank you. Our next question is a follow-up from the line of Ryan Hamilton from Morgan Dempsey. Your question please.
I know I've asked this a couple of times over the last couple of quarters, but are you seeing any indication from retailers or whatnot on shortages of ammo or spike prices in ammo prices being a constraint to potential new buyers?
We're certainly hearing anecdotal evidence, and our sales folks are hearing that from their retailers as far as the demand for ammo. I think our fellow folks in the industry at the ammunition facilities are flat out as well, producing ammo. I think it's a question of, in their case, likely demand outstripping supply as well. Certainly haven't seen that yet negatively impacting sale of firearms, I think because in this case, unlike previous times where we've seen some ammunition shortages that definitely impacted the sale of firearms, in this case, the demand is at high levels for both the firearms and the ammo, and you're seeing the supply not caught up with demand in either case.
It's not a question like we've seen in some past situations where guns were available, but ammo was not, and it had a negative impact on the sale of the gun. At least that's what we're hearing through our informal feedback from our sales force.
Makes sense. On Marlin, do you plan on classifying those products as new design, new product sales, or is that going to be put somewhere else when that starts coming off line?
Good question. I think we'll probably count it as new product sales. That's a good question. We'll probably identify it so we know what's a Ruger new product versus Marlin new product. We've got a lot of work ahead of us on the Marlin product line. We've got to get through the closing, got to get all that equipment moved into Ruger facilities, and there's a lot of work to be done. Of course, the Marlin product line has some great products. Beyond just the center fire lever action firearms that we think of, like the 336, 1894, and 1895, they've also got the Model 60 semi-automatic .22 caliber rifle that, over time, I believe has sold probably more units than even the Ruger 10/22. We're very excited by the mix of products that we're going to have access to bring back to the marketplace.
I may have missed it earlier, did you say where you were going to put that production?
We haven't made final determination. It's going to be split between at least two Ruger facilities, potentially all three. I think it's more likely to be split between the Mayodan, North Carolina facility and the Newport, New Hampshire facility. That still remains to be seen.
One more from me, just from a historical perspective. We see this happen every couple of years where we have a surge in demand. Could you maybe just touch, as far as historically goes, what time of period does this most reflect? Obviously, we can take COVID out of that equation, but just from the production, the demand, could you maybe just touch on that and see what this compares to historically?
In my 30 years plus in the industry, frankly, I think it's different than what we've seen in some of the past demand surges. Even in the run-up to the 1994 assault weapons ban, we saw it in 2013. Again, this is, I think, stronger and fundamentally different in that it affects a wide variety of product categories. When combined with things that COVID-19 has forced us to spend more time at home, more time with our families, and resulted in some long-term positives for the industry with getting people out to the field, out to the range, where you can social distance but still enjoy your sport or practice with your firearms.
I think there's some fundamental differences that are positive for the industry longer term, rather than just a surge in demand, then as things slow down, some of the negative implications that we've seen over the years. I think, we'll be very attuned to watching how demand continues to flow. We pay very close attention to our distributor inventories. Our salespeople are in touch with their key retailers to watch for trends, and we'll be keeping an eye on it. Like I said, I think the good long-term trends associated with this, new buyers, return to getting outside with your friends and family to shoot while you can still social distance, are fundamentally different. The other thing is we've never quite seen the level of inventory depletion within the entire channel.
I mean, whether it's Ruger warehouses or distributor warehouses or the shelves at your local retailer, there's not a lot of inventory out there right now, especially in the key product families. I think it's fundamentally stronger and different than I've seen in my three decades in the business.
Thank you for the color. I appreciate it. Good luck on the rest of the year.
Thank you.
Thank you. Our next question comes from the line of Paul Saferstein from First New York. Your question please.
for taking my question. You guys are in a unique position here in our COVID-19 world. Could you just talk a little bit about, kind of related to your comments on the demand side. You mentioned 5 million new gun owners. What history tells you about how many purchases they might make of your product versus kind of multiple manufacturers and brands? Secondly, to the point of cautious hiring, which I'm sympathetic to. In your Form 10-Q, you have over $400 million of backlog demand, which I guess, there's some risk that it would potentially go away if you don't fulfill that. Can you just talk about how you see clearing that backlog? How many quarters it might take, relative to incremental demand that you're forecasting? Thank you.
Yeah. Thank you. I guess I'll talk to a couple of those aspects, maybe the last one first. One thing, when we look at our backlog, candidly, as a lot of folks on this call know, we don't spend a lot of time dwelling on our backlog. It is significant right now. What we watch more closely is what we call distributor sell-through and distributor sales. We're looking at what distributors are selling into retail and seeing how the product's moving. One note on Ruger back orders, our orders from our distributors, our independent wholesale distributors, are non-cancellable. While they're non-cancellable, our goal is never to stuff the channel, so to speak. We don't want to see our distributors struggle and not be able to pay their bills.
Obviously, right now it's the exact opposite, where they've got empty shelves and, in some cases, they're moving product and cross-docking it very quickly and getting it out to retail. While we don't pay a lot of attention to that backlog, we run our business based on, like I said, the sales from distributors to retail. Even while that's an impressive number, it's not something we focus on. Again, you'll have to remind me again, the first part of your question, if you would, Paul.
Just-
On the hiring aspects?
Well, the hiring was kind of related to fulfilling or diminishing, decreasing the backlog. It seems like if I extrapolate the 15% employee growth, that would kind of talk to about 60% annualized and at least keep up with what the demand numbers are. The separate question really is related to the 5 million new gun owners that you mentioned, and what history tells you about how many guns they might buy.
Right. Okay, good. I appreciate it. That is the other thing that goes along with 30 years in the gun business, is I start to forget some things. I appreciate your patience there.
Fair.
The challenge there from a marketing standpoint and operations standpoint is it's a great opportunity. If you've got 5 million new customers, that's stickiness. It's great to get them into the fold as a gun buyer. How do we convince them to buy gun number 2, 3, and 4, and more importantly, how do we convince them to make sure it's a Ruger? That's something that I think the Ruger product line with our broad range of products available, when we look at our entry level, 10/22 caliber semiautomatic rifles, that so many people have grown up with and had so much fun in on the range, our Ruger Precision Rimfire. On the handgun side, you've got some great entry-level new shooter rifles, or excuse me, pistols, like our 22/45s, our Mark IV pistols made out in Prescott, Arizona.
We've just got such a wide range that I think even for the customer who may have bought a gun potentially for home protection or personal protection, and that might or might not be that person's first firearm. We'd like to see them get into a second, third, and fourth firearm to show them just how much fun this sport can be. There's a lot you can do, whether you're interested in hunting or going to the range. Beyond just that one firearm you may feel a need for a personal protection or home protection standpoint, we think the Ruger product line is very well-suited because of its diversity in covering a wide range of calibers from 22 all the way up to the big bore calibers for serious hunters. We think, given that opportunity, we like our chances to succeed.
We think we've got some great options for folks, and we think, frankly, the Marlin product line is going to continue to add to that for us.
I don't know if you could kind of point to a number. If you look at history, how many of your guns does one customer potentially buy? Again, on an average.
Well, I hate to throw that number out as a guess. I know we've got that in our marketing material.
But it-
Most Ruger customers, once you get them over that first gun, most of them are multi-gun owners.
Right.
We've got some folks that have a whole safe full of Rugers that they can rattle off every one and the story behind every one they acquired it. I'm not going to hazard a guess on the exact number per customer. I think we probably do better than most because of the diversity of the product line. When you look at the mix of products and over 900 separate line offerings, there's so much to choose from in the Ruger product line that I think we probably get more than our fair share of those multiple gun buyers.
Got it. If I could, just one last one to sneak in. Getting a gun license right now seems like kind of an extended timeframe from the government. Do you have any comments around that?
Well, I think it probably varies by state, as you likely know. Depending on what state you're in, it can be a long process. I think a lot of potential buyers were surprised when they went to go buy that first firearm, again, depending on the state they live, that there were significant delays and obstacles to getting that first purchase done. One, we think that, of course, state and local governments were impacted by COVID-19 just like all of us were. I know that's had some impact. I think the biggest factor is just people were surprised. If they hadn't been a gun buyer before-
they were surprised at some of the hurdles and hoops that they may have had to jump through in order to exercise their Second Amendment rights.
Yeah. No, that's definitely the case in N.Y. here. Just kind of the price increase that you just mentioned, can you quantify what the weighted average price increase would be? Do you think that there'll be more increases over the next several quarters because of the amount of demand you're seeing?
Typically, we've had years where we typically do a price increase on or about the beginning of the year. In this case, I think I mentioned not beginning of November. It was actually the beginning of October. It was about 3% across the board. That's kind of in line with our normal annualized price increase.
Okay, about 3% annualized is kind of where you think things would be, even with the increase in demand?
Yeah, I think we're conscious of the fact that a lot of people contemplate their purchases, when it comes to firearms, even in this market. They're thinking about that next favorite hunting rifle. We did take a price increase, but certainly did not do anything that I would consider to be opportunistic. It was just we took it in October rather than maybe normally we would do that in December. Again, 3% is right in line with what we've done in years past.
Great. Okay. Thanks again. Appreciate everything.
Thank you. Our next question is a follow-up from the line of Mark Smith from Lake Street Capital. Your question, please.
Guys, just one quick one from me. Can you talk about the mix of demand that you've seen? We would expect handgun and MSR to be kind of the high ones. Then anecdotally, it seems like over the last month to couple months, we've seen more demand in traditional hunting rifles. Can you say if you've seen that? If so, if you think that's just driven by typical seasonality as we enter hunting season, or is it more a fact that people are now looking for just about any firearm they can find rather than maybe the one that they wanted?
Good question. On the hunting rifle topic, our Ruger American Centerfire Rifles has done extremely well over the last couple of years. We were planning for a strong centerfire rifle market, and production, and demand cycle well prior to COVID. We thought our sales would be strong there on hunting rifles. They have been. I think to some extent, you're correct in that people have gone into gun stores and maybe hoping to make a purchase on something. Maybe they came in looking to make a purchase on potentially a centerfire pistol or an MSR type product and ended up, based on available inventory, buying a bolt-action rifle. Certainly anecdotally, we've heard some of that, but we've been very pleased with the sale of hunting rifles in our traditional calibers as well as some newer calibers like the 450 Bushmaster, 350 Legend, et cetera.
That's been stronger than we thought initially. Certainly, like I said, we were expecting a good hunting season, and we haven't been disappointed in that.
Okay, great. Thank you.
Thank you. This does conclude the question and answer session of today's program. I'd like to hand the program back to Chris Killoy for any further remarks.
Thank you. In closing, I would like to again thank our 1,700 plus employees for their hard work and dedication during these difficult times. On behalf of all of us at Ruger, I also want to thank all the first responders, nurses, doctors, and other emergency and medical personnel who continue to go into harm's way to fight this pandemic and help our fellow Americans who are most in need. Please take the time next week to vote. Our right to vote should be cherished, so please let your voice be heard at the ballot box. Thank you for attending our conference call and for your continued interest in Ruger. We look forward to discussing our fourth quarter results in February 2021. Thank you.
Thank you, ladies and gentlemen, for your participation in today's conference. This does conclude the program. You may now disconnect. Good day.