Greetings. Welcome to the Stratasys Q1 2022 Conference Call and Webcast. At this time, all participants are in a listen-only mode. A question- and- answer session will follow the formal presentation. If anyone should require operator assistance during the conference, please press star zero on your telephone keypad. Please note this conference is being recorded. I will now turn the conference over to your host, Yonah Lloyd, Chief Communications Officer and Vice President of Investor Relations. You may begin.
Good afternoon, everyone, and thank you for joining us to discuss our 2022 first quarter financial results. On the call with us today are our CEO, Dr. Yoav Zeif, and our CFO, Eitan Zamir. I would like to remind you that access to today's call, including the slide presentation, is available online at the web address provided in our press release. In addition, a replay of today's call, including access to the slide presentation, will also be available and can be accessed through the investor relations section of our website. Please note that some of the information you will hear during our discussion today will consist of forward-looking statements, including, without limitation, those regarding our expectations as to our future revenue, gross margin, operating expenses, taxes, and other future financial performance, and our expectations for our business outlook.
All statements that speak to future performance, events, expectations or results are forward-looking statements. Actual results or trends could differ materially from our forecast. For risks that could cause actual results to be materially different from those set forth in forward-looking statements, please refer to the Risk Factors discussed or referenced in Stratasys' annual report on Form 20-F for the 2021 year. Please also refer to our operating and financial review and prospects for the 2021 year and for the first quarter of 2022, which are included as Item 5 of that annual report and in Exhibit 99.2 to the report on Form 6-K that we are furnishing to the SEC tomorrow, respectively.
Please also see the press release that announces our earnings for the first quarter of 2022, which is attached as exhibit 99.1 to a separate report on Form 6-K that we are furnishing to the SEC today. In order to obtain updated information throughout the year concerning our quarterly results of operations and the risks and other factors that most impact those results, please see the quarterly earnings press releases and our quarterly operating and financial review and prospects, each of which will be attached as an exhibit to a report on Form 6-K that we will furnish to the SEC on a quarterly basis over the course of the year. Stratasys assumes no obligation to update any forward-looking statements or information which speak as of their respective dates. As in previous quarters, today's call will include GAAP and non-GAAP financial measures.
The non-GAAP financial measures should be read in combination with our GAAP metrics to evaluate our performance. Non-GAAP to GAAP reconciliations are provided in tables in our slide presentation and today's press release. I will now turn the call over to our Chief Executive Officer, Dr. Yoav Zeif. Yoav?
Thank you, Yonah. Good afternoon, everyone, and thank you for joining us. Today, I will touch on the highlights of our first quarter and share insights on a number of key milestones achieved so far in 2022. I will then hand it off to Eitan to discuss our financial results and outlook in more detail. The first quarter was our strongest in six years. A great start to an exciting year for Stratasys. We delivered solid results that include contributions from across our platform to drive top line growth and improved margins. All of our technologies grew, and I'm happy to say that all of our key businesses showed improvement compared to our pre-COVID first quarter of 2019. We are particularly excited by the early momentum from our new Origin P3, H350 SAF, and Neo systems, designed specifically for high-volume production of end use parts.
Our focus on execution is yielding results that demonstrate how our strategy to grow our leadership position in polymer 3D printing is working. Our revenues of $163.4 million were up 22% versus the prior-year quarter. We see particular strength in systems which grew 37%, and we ended the quarter with a robust balance sheet that included over $475 million of cash and no debt. During the first quarter, we expanded our penetration further into applications for aerospace, automotive, and fashion. We tailored industry-specific solutions. For example, working with our partner, Lockheed Martin, we uniquely qualified a high-performance Antero material for aerospace end-use parts. In automotive, Radford Motors is now the second auto OEM, using all five of our technologies for use in design, prototypes, tooling, and final parts used in vehicle production.
We also officially launched the commercialization of our Fashion Solution with TechStyle. That's T-E-C-H Style. The industry's first 3D printer designed specifically for printing direct to garments and other end products. It opens unlimited possibilities for the fashion industry to personalize and customize premium textiles, clothing, bags and accessories, footwear, and many other fashion applications. I would like to highlight three important milestones reached since the close of the quarter, that we expect will contribute to our ongoing efforts to outperform. First, we announced the creation of a new entity comprised of MakerBot and Ultimaker. With our focus on industrial, healthcare, and production scale polymer 3D printing for manufacturing, we determined that MakerBot, a desktop solution, fell outside of our core businesses. The transaction serves several purposes. It allow us to further concentrate our efforts to grow our leadership position in our area of focus.
It has a margin-accretive benefit on our business, and our commercial agreement provides us access to entry-level 3D printing users, allowing us to potentially realize incremental synergies without distracting our resources. We believe that the desktop sector is growing at a healthy pace, and that the new company will be a leading force in that industry. We view our investment as having the potential to realize incremental long-term value for our shareholders. Second, we recently published our inaugural report on environmental, social, and governance activities, which we believe is the first report published to GRI standards in our industry by an OEM. This report outlines our commitment to ESG and establishes benchmarks for future targets. Our sustainability priorities include design for responsible production and consumption, transparency, people first initiatives, and social impact programs. We are also focusing on renewable energy projects, quality education, industry innovation, and climate action.
The 3D printing industry is ideally situated to drive innovation and improvement in manufacturing from a sustainability perspective, and Stratasys is aiming to lead those efforts. I encourage visiting our website to review the report. Third, last week we hosted our annual flagship manufacturing virtual event, where we announced a number of new product updates, which will strengthen our market leading offerings and the value potential our products can bring to customers. PA12, the most popular industrial 3D printing material, is expected to be available later this year for our H350 printers. Also for the H350, we announced the upcoming availability of polypropylene, which is very popular in traditional manufacturing, but not widely available in 3D printing. This material further demonstrates the competitive superiority that our SAF technology provides in powder bed space with respect to material, speed, accuracy, cost per part, and total cost of ownership.
In FDM, we are upgrading our F123 series with the launch of the F190 CR and the F370 CR systems. CR means composite ready and includes the new Nylon-CF10, a carbon fiber material that is both exceptionally strong and light, thereby extending the end market opportunities for the F123 series. We also announced our first Stratasys validated FDM materials from third-party materials partners, which our channels will begin to sell in the second half of 2022. It's a great example of our open materials ecosystem approach beginning to bear fruit. For our P3 technology, we are adding Rapid Print software to Origin, completing the integration effort to have a single platform across all of our core manufacturing systems. We announced the availability of the first Origin compatible materials from our Origin Open Material License.
Importantly, we launched Origin Local, an offline non-cloud version, which is ideal for use by certain defense and government applications. When you consider all of these developments, along with the new product that we recently launched, you can see why we are so excited about the future. As we execute on our strategy and build momentum, customers continue to permanently replace a number of their traditional manufacturing choices with our additive manufacturing solutions, expressing their long-term confidence in Stratasys. The recent supply chain and related issues have been a catalyst across industries to rethink how they manage their product life cycle. We see it happening with leading companies such as General Atomics, which invested in both Stratasys and Stratasys Direct, and has been expanding its additive manufacturing program for unmanned aerial vehicles beyond tooling to end use parts.
They have a goal to increase the percentage of parts using additive on their UAV drones to 50% on their smaller ones and mid-single-digit percent on the larger ones. We see it with healthcare companies like Medtronic, which has moved from machine tools to 3D printed tools with Stratasys because they can create more accurate, complex parts while reducing cost by 80%, saving millions of dollars. We see it with transportation giant like Alstom, which is 3D printing spare parts, tens of thousands of them so far, as part of its Industry of the Future program, reducing its dependence on outside suppliers while reducing lead time by 95%.
There are many more such changes taking place across industries, and we believe that this clearly shows the path that manufacturers are on as they make their production lines more efficient, less costly, more sustainable, and simply better with Stratasys. We are also encouraged to see the U.S. government and large manufacturers step up to help more companies get involved in our industry through the Additive Manufacturing Forward program. This initiative was announced by the White House earlier this month and reflects their belief in 3D printing's benefits to the manufacturing economy. This includes building more resilient supply chains and onshoring manufacturing to help grow the economy. The program is specifically designed to help suppliers to companies like Raytheon and Lockheed Martin invest more in additive manufacturing. GE Aerospace, Honeywell, and Siemens are also some of the initial participant companies.
While many of our largest customers are building out sophisticated advanced manufacturing centers, it's their suppliers that manufacture a lot of their end-use parts. This program helps incentivize more companies to invest in additive manufacturing, given large OEMs are now committing to purchasing additively produced products. The program also will provide training, technical assistance, and standards development. All things needed to help additive manufacturing to go in mainstream. Stratasys has the full solution and broadest portfolio to support this initiative. With that, I will now turn the call over to our CFO, Eitan Zamir, to share the financial results and update our outlook for 2022. Eitan?
Thank you, Yoav, and good afternoon, everyone. We're pleased to have delivered a strong start to 2022. The revenue growth, especially the 36.7% growth in our system sales, along with our improving margins, position us to build momentum through the balance of the year and beyond. For the first quarter, total revenue was $163.4 million, a 21.8% increase from the prior year period, driven by growth from all technologies and primarily by strength in systems. On a constant currency basis, total revenue increased 24% versus the prior year quarter. Important to note is that all key businesses were higher than the pre-pandemic first quarter of 2019, resulting in total revenue being 5.2% higher as compared to that period.
Product revenue in the first quarter was $113.1 million, an increase of 25.2% compared to the same period last year or 27.8% on a constant currency basis. Within product revenue, system revenue increased 36.7% to $54.5 million compared to the same period last year, and increased by 39.3% on a constant currency basis. System sales reflected the highest first quarter total in five years, strengthened by the launch of the Origin One in mid-February and the first full quarter of H350 sales. Importantly, the higher margin consumable business saw revenue increase by 16.1% to $58.6 million compared to the same period last year, and increased by 18.8% on a constant currency basis.
Consumables revenue also exceeded the first quarter of 2019 as well as the fourth quarter of 2021, reflecting the impact of strong system sales throughout 2021 and their expected flow-through as initial materials are replenished. Service revenue was $50.3 million, an increase of 14.8% compared to the same period last year, and slightly higher than the first quarter of 2019. On a constant currency basis, service revenue increased by 16.1%. Within service revenue, customer support revenue increased by 10.1% compared to the same period last year, and increased by 11.7% on a constant currency basis.
We note that 2022 is the year of strategic execution following the important acquisitions we made in the past two years to strengthen our technology portfolio and ensure we could provide comprehensive solutions across the entire polymer application space. These investments are already contributing to revenue, putting us ahead of the curve and increasing our competitive advantage in the 3D printing industry. Now, turning to gross margin. GAAP gross margin was 42.6% for the quarter compared to 41.4% for the same period last year. Non-GAAP gross margin was 47.3% for the quarter compared to 46.7% for the same period last year. Margin improvement year-over-year was driven by higher revenues in systems, consumables, services, and improved operational efficiencies. This was partially offset by macro issues related to logistical challenges and availability of materials.
GAAP operating expenses were $89.3 million, an increase of $15.3 million or 20.7% from the same period last year. Non-GAAP operating expenses were $75.3 million, an increase of $10.1 million or 15.5% compared to the same period last year. Non-GAAP operating expenses were 46.1% of revenue for the quarter. Our lowest Q1 OpEx as a percentage of revenue in seven years, compared to 48.6% for the same period last year. The $10.1 million year-over-year increase in operating expenses on an absolute basis was driven primarily by the impact of three acquisitions, Xaar 3D, Origin, and RPS, as well as higher commission based on higher revenue.
We were pleased to see the efficiency of our model, where the additional operating expenses reflected only a 35% incremental cost instead of the historical range in the mid- to high-40%. Regarding earnings, GAAP operating loss for the quarter was $19.6 million, compared to a loss of $18.4 million for the same period last year. non-GAAP operating income for the quarter was $2 million, compared to a loss of $2.6 million for the same period last year. The difference reflects our business scalability and improved operational efficiencies, which resulted in better growth margin and lower operating expenses. GAAP net loss for the quarter was $20.9 million or $0.32 per diluted share, compared to a net loss of $18.9 million or $0.32 per diluted share for the same period last year.
Non-GAAP net income for the quarter was $1.2 million or $0.02 per diluted share, compared to a loss of $3.8 million or $0.06 per diluted share in the same period last year. Adjusted EBITDA of $8.1 million compared to $3.5 million in the same period last year, reflecting our improved profitability levels. We used $16.1 million of cash from operations during the first quarter, compared to generating $22.8 million of cash in the same quarter last year. The use of cash was driven by deliberately increased inventory purchases and an increase in accounts receivable. We ended the quarter with $475.6 million in cash equivalents, and short-term deposits, compared to $502.2 million at the end of the fourth quarter of 2021.
We remain well-funded and well-positioned to capitalize on value-enhancing market opportunities as they arise. Now, let me turn to our outlook for 2022. I would note that our guidance continues to include full- year anticipated contribution from MakerBot as the announced business combination with Ultimaker has not yet closed. We expect the transaction to be margin accretive upon closing, and we plan to update our outlook later this year. Today, we're tightening the revenue range from our previous guidance for 2022 revenue. It is now $685 million-$695 million. While we are encouraged by the level of engagement with our customer and confident in our growth potential, we're also monitoring global issues that can have an impact, such as the shutdowns in parts of China, currency fluctuation, and continued other supply chain constraints.
We continue to expect revenue to grow sequentially each quarter throughout the year, with the second half of the year notably stronger than the first half. Revenue growth for the second quarter is expected to be low- to mid-teens as a percentage over the second quarter of 2021. From a gross margin perspective, we continue to expect full year 2022 to be flat to slightly higher as compared to 2021, with the second half stronger than the first half, based primarily on higher revenue. We expect the second quarter to be relatively flat to the second quarter of last year. As a reminder, we view the current gross margin situation as temporary. When headwinds caused by logistics and material macro issues pass, and we continue to execute on our long-term plan, we expect our margin to head back over 50%.
In 2022, we continue to expect our operating expenses to be approximately $20-$25 million higher than 2021, primarily due to the impact of owning Xaar 3D for the full year, higher costs that result from higher sales, and investment in new growth driver such as Origin One and healthcare. Operating expenses are typically higher in the second quarter as compared to the first quarter due to the normal timing of compensation expenses. While the absolute dollar value of these expenses will grow, we expect to see the percentage of revenue remain flat or even improve slightly throughout the year. While the first quarter came in stronger than expected, we recognize that the above-mentioned supply chain and other macro issues could impact our revenues and costs. We continue to guide non-GAAP operating margins to be slightly above 2% for the full year.
Longer term, we expect operating margins to achieve double digits as our growth plan unfolds. We continue to anticipate a GAAP net loss of $74-$67 million, or $1.11-$1.00 per diluted share, and non-GAAP net income of $10-$13 million or $0.14-$0.19 per diluted share. Adjusted EBITDA is still expected to be in the range of $38-$41 million, and capital expenditures in the range between $20-$25 million. With that, let me turn the call back over to Yoav for closing remarks. Yoav?
Thank you, Eitan. Our strong start to the year and the strategic moves we continue to make demonstrate that we are executing on our plan. The powerful combination of our new technology offerings, expanded materials and software solutions, strong balance sheet, and our dedicated, talented teams positions us well to execute on our strategy with excellence. We will continue to grow our top and bottom line, improving profitability over time due to increasing scale. As I noted earlier, we are relentless about our focus to grow our leadership position in polymer additive manufacturing. Our results over the past two years clearly reflect that our strategy is working. With that, let's open it up for questions. Operator?
At this time, we'll be conducting a question-and-answer session. If you would like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star two if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. In addition, we ask that you please limit to one question followed by one immediate follow-up question. One moment please while we poll for questions. Our first question is from Greg Palm with Craig-Hallum. Please proceed with your question.
Yeah, thanks. Congrats on the progress here, and thanks for taking the questions.
Thanks, Greg.
Yoav, you've been a big believer in having this kind of, call it, full product portfolio across different kinds of polymer technologies. You know, curious now that everything's launched, it's in the market, you know, are you seeing the synergies in line with what you expected or are they better? I mean, you mentioned the second auto OEM that's using all five, but curious if you think they're capturing more wallet share with some of the existing customers as well.
Thank you, Greg, for the question. As we wrote in our script, the strategy is working, period. The ability of Stratasys to leverage our infrastructure, our go-to market, our expertise in polymer, our cutting-edge technologies, and build all this on two ecosystem, two platforms, which are the material and the software with cutting-edge technology, capturing the synergies across technologies, but also within customers with the same go-to market, it works. We are very encouraged by that because we really put in place our differentiation and our uniqueness to work. It works.
Yeah. You know, Greg it's Yonah , what I would add on that is it's very encouraging to see how customers are actually making that permanent switch from their traditional manufacturing to additive. We highlighted a few of the customers in the slides, but there are dozens and dozens, and I think that really is the strongest demonstration from the market that they believe in the technology. They believe that we can help them improve their production lines. We look forward over you know course of the next quarters and years to building on that because that's how you start to disrupt the traditional manufacturing and begin to take away that $13 trillion addressable market piece by piece.
Yeah. Completely agree. It goes beyond just the five technologies. It's the ability to create the solution with the material which is open, with and validated, with the software, with the service, and put everything together around this package, which is practically we are connecting everything with the software. Rarely, I think that it would be very difficult to competitors to meet this offering to our customers.
Yeah, that makes a lot of sense, and thanks for that commentary. My follow-up was gonna be along those lines in terms of who or what you think you're displacing, and it sounds like, you know, maybe it's more of a byproduct of displacing traditional technologies. But if all of a sudden you've got customers that are using all five of your technologies, presumably you're displacing maybe some competitors in the additive field as well. What are your thoughts on that versus traditional?
We are focusing on delivering value to our customers. We believe that using one platform of material and software and service with five technology, with our expertise, with our application engineers, is the best value that we can deliver and very competitive in the marketplace. That's what will take us forward. You know, in some cases we see customer replacing and displacing other additive manufacturing providers, but we are focusing on adding value and not on taking out other customers or other providers.
Okay. Good. Well, best luck going forward, and look forward to seeing you at RAPID this week.
Thank you.
Our next question is from Troy Jensen with Lake Street Capital. Please proceed with your question.
Hey, gentlemen. Congrats on 22% growth here. It's pretty impressive.
Thank you.
Thank you.
First, a clarification, Eitan. Could you give us the dollar amounts again for systems and consumables?
You mean the total revenue actual Q1?
Yeah. Total system revenues in Q1.
Yeah, yeah.
Consumable revenues in Q1.
Total system is $54.5, and total consumables is $58.6.
Awesome. Thank you. For Yoav, polypropylene, I guess to my knowledge that that material isn't available at all in the industry, and I thought you said it wasn't widely available. I guess I'm curious to know, is this real polypropylene or polypropylene like? Am I correct in thinking that it's not really available?
It is available, but we believe that our offering will be a much better one in terms of accuracy, speed, like all the whole list that we put together in the script and cost per part because of the, I would say, the versatility of our machine and the ability to have a great thermal control, which is very important for polypropylene. For many years, I was managing plant where the main input was polypropylene. It's a great material, and it's really a great step into manufacturing. This is the most common plastic out there.
Yeah, I totally agree. Am I correct that it was just the H350 that this is on?
Yeah, you are right.
Awesome. Awesome, guys. Well, congrats on the great results, and I'll see you tomorrow.
Thank you.
Thank you.
See you tomorrow.
Thank you for your event.
Our next question is from Wamsi Mohan with Bank of America. Please proceed with your question.
Yes. Thank you, and congrats on the strong results. Really nice revenue growth.
Thank you.
I was wondering if you can talk a little bit about gross margins. I think you guys alluded to both macro challenges and availability of material. Can you help us think through how much are gross margins pressured by inflation and supply chain issues currently? Because I understand your target is to be significantly higher. What sort of pressure are you currently absorbing?
Right. Thanks to you, Vamsi. It's a good question. I think we related to this in the script that in Q1 we had approximately a little bit more than 2%, 200 basis points compared to Q1 2021. That's the impact of the inflation and the, you know, material cost. We did compensate with price increase, but we're really focused on delivery to our customers and that's the focus. We're able to mitigate some of these pressures and costs with price increase as mentioned.
Okay. Thank you. I'm also trying to understand the EBITDA bridge as it pertains to the second half versus the first half. If I just look at your OpEx guide increase for the year of $20-$25 million, you already have about $10 million of that increase absorbed in Q1, and you already said Q2 was going to be up sequentially. Is it right to think that most of this OpEx increase is very front-end loaded for you in the year? If so, if the back half OpEx is relatively flat and you're already doing $8 million in EBITDA, why would you not see much more stronger EBITDA leverage in the back half of the year? Because you're annualizing already to $32 million EBITDA, and your low end of your guide is $38 million, but your OpEx is so much front-end loaded.
Can you just help me think through the moving pieces on this EBITDA bridge? Thank you.
You know, that's a good question. First of all, when you look on 2021 spread over the quarters, over the year, there was a difference between, you know, the different quarters and, you know, OpEx increase in the second half of 2021, partially related to the Xaar acquisition and other items that we've mentioned in previous calls. That's why the change, the increase that you see Q1 versus Q1, does not necessarily reflect the trend for the next quarter. I hope that it addresses the question. Then on the improved EBITDA or the kind of EBITDA that we guide. You know, as mentioned on the script, you know, we are very confident about our ability to meet our numbers and to meet our guidance.
We do take into account the challenges, the macroeconomic challenges and the high certainty in the current market. We embedded that into our bottom line guidance. As we move throughout the year, we will be able to update further if those conditions improve.
Okay. Thank you very much.
Maybe one thing I would just want to leverage your question, just to thank our operations team, your question about supply chains, because they did really above and beyond. I know many companies in our industry and out of our industry that couldn't deliver and couldn't meet their revenue targets because of supply chain. Our guys did fantastically well. We are sourcing globally, but they found so many creative ways to deliver, and I thank them for that. Despite the fact that we put delivery as first priority, we improved gross margin. All the applause for our ops team.
Our next question is from Paul Chung with JP Morgan. Please proceed with your question.
Hi, thanks for taking my question. Just on consumables, should we kinda expect some acceleration here, maybe, after such a strong rebound here in system sales over the last couple of quarters? You know, how typical is the lag for reorders for some of these newer systems? Just on utilization rates from your install base for consumables, you know, where are you seeing kind of pockets of strength there on both, you know, materials and applications?
Thanks Paul for the question. You saw the increase in our hardware this quarter and also in the last few quarters. The higher the hardware growth is, the more consumables and services will follow. We already start to see those fruits in this quarter, which was the consumable was the highest since Q2 2018. We expect to continue to see this growth also coming from our new products.
Okay, great. You know, follow up on the U.S. government initiative here. You have a slide here pointing that out. Are your discussions kind of accelerating from, you know, some of those key companies in aerospace on your slide? You know, do you get a sense there may be kind of possible government funding involved, or, you know, are you seeing any catalyst from the policy side? Thank you.
Thank you for the question, Paul. We have long relationship with the government and specifically with the U.S. government. We believe that the government is a catalyst, it's a catalyst practically for the adoption of 3D printing because it's so fit. Like it's the best fit for long sustaining programs for a spare part. We showed it with our NAVAIR deal, which is a long-term deal, and we are supporting it. We'll see more of those deals going forward. We have a lot of appreciation to the U.S. government as a catalyst for the adoption of additive manufacturing.
The ability to leverage also our relationship with corporate America and leading aero and auto players like Lockheed Martin and others, and to build a package that address not the leading company, but many, many, many suppliers, is really unique to Stratasys. Because as I, you know, as I mentioned at the beginning of this call, we have the solution, we have the full package.
When someone want to step into additive and to start manufacture, it's a lot of training, it's a lot of support, it's a lot of, you know, we need to hold the hand of those small suppliers and make sure they are meeting the requirements and the certification and the allowables that we invest so much for the high end. We believe that the combination of, corporate America, the government, and our, you know, infrastructure and capabilities can be a great success. It's a journey, but we are happy to start, stepping into it.
Great. Thank you. Our next question is from Jim Ricchiuti with Needham. Please proceed with your question.
Hi. Question, just, you know, given where we are, middle of May, I'm wondering what you've seen in terms of demand. You obviously had a strong Q1 in terms of top line growth, but I'm just wondering, in light of some of the macro challenges that we're hearing about, are you seeing any change in demand, either in specific verticals or geographies? Or are you seeing the same level of demand exiting the quarter that you saw in Q1?
Hi, Jim. Thank you for the question. To date, demand is strong. It doesn't mean that we, as leaders of this company, are not, you know, looking all over and planning for the future because we are looking what's going on in the capital market and in other markets. It's clear to us, today, demand is strong, and this is why we build our inventory. You can see it in the report. We build our inventory because the demand is strong and we need to meet the demand. We are not, you know, we are not driving blind. Of course, we are cautious, but, you know, thank God and thank the industry and, good technology, the demand currently is strong.
A separate question in a somewhat unrelated area, just, but I wanted to follow up on the new product that you've introduced into the textile printing market. I wonder if you could talk a little bit about the strategy for this product. It seems like it's a different channel. You know, to what extent is this more of a gradual introduction in terms of planting a flag in this market?
It's a great question. As I mentioned, we have four growth engines, the cutting edge technologies, the five technologies, the software, the material, the service, but nothing will work if we not cross the chasm of this industry from prototyping to manufacturing. You can cross the chasm only with use cases. Fashion is a great use case with huge potential. Our addressable market is the high-end fashion market. We're talking about luxury goods, high-end fashion, because we can do something that no one else can do. With our PolyJet technology, we can have design, we can work with the best house brands in the world, and we are already doing it. We already have some fantastic results, and we are talking about thousands of items like shoes and garments that are already there.
Of course, it's just the beginning of the beginning, but we are going to show it in the Milan show, I think it's in June. It's super exciting because it's mass market and it's real manufacturing, and it's real manufacturing with material jetting that no one believed in the world that it's possible. We made it happen.
Are you going direct or using a channel partner here?
We are doing both, and we were also using service bureaus because this industry is working a lot with outsourcing to high-end manufacturers. We are doing both. It's really exciting. I really invite you to come and see it in the Milan fashion show. It's amazing.
Got it. Thanks very much. Congrats on the quarter, by the way.
Thank you.
Our next question is from Ananda Baruah with Loop Capital Markets. Please proceed with your question.
Hi. Good afternoon. Good evening, guys. Thanks for taking the question.
Thank you.
Congrats on the strong execution and the good results for following this. Yeah, you're welcome. Could you remind us, to the extent you can give a context on the second half of the year or for the remainder of the year, what you guys will be doing in terms of new products across the platform? I think a quarter or two ago, you had made mention that you had new products coming out throughout 2022. That'd be great. Thanks.
Can you please repeat? Because I'm not sure.
Ananda, it's a little hard to hear. Were you asking about the new products we're launching, during the rest of the year?
Yeah, exactly. You know, any context.
Oh, great.
I know you can only get so specific, but just any context that you can give.
Yeah, this is a great question. Thank you. Now it's clear. We had last week our manufacturing event, Experience Stratasys: Manufacturing. Within this event, we were very clear on what are the new products. The focus now is to take what we have and make sure that it's suitable for manufacturing. It start with two new material, the PA 12 and the polypropylene for the SAF, for the SAF technology. We have 16 overall new materials. You know, this is. I don't know if there are others. I don't want to say something that I'm not sure, but 16 materials to launch in one year, this is remarkable. This is really remarkable. On top of it, we are putting all our technologies on GrabCAD, which is a new product.
GrabCAD will be also in the stack and also on the Origin. We also have the Origin Local, which is suitable for manufacturing with defense and other similar industries and verticals. We are making sure that we are following our strategy. It's not only the cutting-edge machine, but you have also the software and the material and the service to be successful. From my perspective, this is real additive manufacturing 2.0 because it's not about the technology, it's about solving the problem to the customer. This is 2.0. You can be 2.0 AM only if you have the full solution. I'm proud to say that we have the full solution.
That's great. That's it for me. Thank you so much. Really helpful. Looking forward to seeing the rest of the year.
Yep. Thanks, Ananda.
Our next question is from Noelle Dilts with Stifel. Please proceed with your question.
Hi, guys. Again, congrats on the good quarter. It seems like you're pretty satisfied with your current hardware, technologies and offerings. Can you revisit if there's anything you feel you need to add on that front? If you could just generally speak about your M&A priorities. Thanks.
I know, and thank you. That's a great question. We are not satisfied at all with what we have. That's not our nature here. We're not satisfied with anything. For each one of our technology, we have a five-year roadmap to make sure that we will be at the front of this technology for many years to come, and we spent very high level of R&D in order to make it happen. Having said that. By the way, it's in our five-year plan, it's in our annual operating plan in each one of our technologies. Let's put this aside. We also understand that we must invest in material and in software and improving our service because we are taking our solution and those technologies to manufacturing. It's a completely new set of requirements from the customer side. That's exactly what we are doing.
In terms of the technology, to get back to your question, we are investing. I think we already mentioned it. We have an arm, and we should probably announce it in more details, but we have an arm that invests in technologies to make sure that we are not only innovating internally, but also externally to secure our polymer leadership position. We invested in companies like Genera and like 9T Labs and like Inkbit, which are really. This is the new generation of AM, and we will make sure that that will be part of our offering as well.
Okay, thanks. Jim asked this question a bit, but could you expand a little bit on what you're seeing from a geographic trend perspective? Thanks.
Geographic trends. We you know put aside the lockdown in China that you know obviously impacted the entire world. We see a strong demand from all our geographies. Very strong quarter for EMEA, for our EMEA business, but also in the other businesses, strong demand.
Thank you.
We have reached the end of the question- and- answer session. I'll now turn the call over to CEO, Dr. Yoav Zeif for closing remarks.
Thank you, thank you for joining us. Looking forward to updating you again next quarter.
This concludes today's conference, and you may disconnect your lines at this time. Thank you for your participation.