Hello, everyone. Thank you for joining us, and welcome to the USA Compression Partners 2026 third quarter earnings call. After today's prepared remarks, we will host a question-and-answer session. If you would like to ask a question, please press star one to raise your hand. To withdraw your question, press star one again. This conference is being recorded today, November 3rd, 2026. I now would like to turn the call over to Clint Green, President and Chief Executive Officer.
Good morning, everyone, and thank you for joining us. With me today is Chris Paulsen, Senior Vice President and CFO, Chris Wauson, Senior Vice President and COO, and other members of our leadership team. Earlier today, we released our operational and financial results for the quarter ending September 30th, 2026. Today's call will contain forward-looking statements based on our current beliefs and certain non-GAAP measures. Please refer to our earnings release and SEC filings for reconciliations and definitions of non-GAAP measures and related risk factors. Moving to the quarter, performance reflects the resilience of our business and strong execution from our team. We delivered sequential growth in revenue, Adjusted EBITDA, and Distributable Cash Flow, while average revenue-generating horsepower, revenue per horsepower, total revenue, and Adjusted EBITDA each reached record levels. Distribution coverage remained strong, and leverage stayed near our stated target.
We are tightening our full-year DCF guidance to a new range of $495 million-$505 million, reflecting 2026 cash flows in line with our overall expectations entering the year. We are also updating Adjusted EBITDA guidance, $770 million-$780 million, reflecting higher commodity-linked operating costs, lower overall retail parts and service activity, and some strategic shifts related to manufacturing cash sales. Importantly, our core contract operations business remains strong, and our guidance update does not reflect a downward shift in this demand. Putting performance in the context of the broader market, higher oil prices over the past nine months have strengthened customer balance sheets, but have not led to a broad increase in oil-directed drilling activity. At the same time, domestic consumption of natural gas, excluding LNG, is still waiting on material data center growth to ramp in the Northeast and Texas.
Put simply, our 2026 results have been driven by execution. From here, we expect near-term growth to remain consistent but measured. Higher oil prices remain constructive, but uncertainty persists around duration. While incremental natural gas demand continues to build, with a greater impact expected in late 2027, overall macro fundamentals remain healthy, while the underlying demand drivers build toward more meaningful acceleration in 2028. In compression, supply remains tight, contracting activity remains healthy, and growing natural gas infrastructure needs provide a compelling long-term growth opportunity. Our approximately $500 million aggregate new unit order book through 2029 reflects our confidence in the durability of the opportunity and our ability to capitalize on it. As we enter 2027, we believe our newly integrated platform will be in an even stronger position to execute.
We have a broader customer base, more opportunities to high-grade the portfolio, and greater flexibility to direct equipment and capital toward the most attractive returns, including the ability to ship manufactured units between cash sales and our contract compression fleet as opportunities evolve. Combined with the execution we have demonstrated this year, we believe that scale and flexibility position us to win across market cycles. With that, I will turn the call over to Chris Wauson.
Good morning, everyone. To start, through a period of significant organizational and operational change, safety has remained our top priority. Our safety metrics continue to compare favorably with industry benchmarks, reflecting the continued focus of our teams on the processes and standards that support safe, reliable service for our employees and customers. That commitment is fundamental to how we operate. Next, commercial execution was strong during the third quarter. Customer demand remained consistent while unit stops moderated, contributing to a 30 basis point increase in utilization since the end of the prior quarter. More than 60% of our new horsepower scheduled for delivery in 2027 is now contracted, including approximately 90% of first-half deliveries. Importantly, we have built this order book while maintaining our commercial discipline, engaging our tier 1 customers, and continuing to improve the credit profile of our cash flows.
Our pending contract and quote pipeline remains robust, and we continue to see opportunities progress toward executed contracts. Pricing across the broader portfolio also remains constructive, as we delivered solid 1% sequential rate growth during the third quarter despite increased competition from smaller operators in certain markets. We continue to take a disciplined approach to pricing while working to maintain a healthy commercial pipeline. Customers continue to prioritize dependable equipment, strong field service, and a compression provider with the scale and capabilities to support multi-year development plans. To better serve those needs, we will continue to enhance our ERP platform, business applications, and analytics capabilities. A significant step forward came on October 1st when we completed the integration of the legacy J-W compression units into SAP.
This brings our operational teams onto a more consistent framework from maintenance activities, inventory management, and performance reporting, while providing greater data and performance visibility across the fleet. With most core integration work behind us, we are increasingly focused on operating as one organization and strengthening the capabilities of the combined company. That includes greater use of analytics and intelligence tools, as well as a planned investment in larger, more standardized training facility in the Dallas-Fort Worth area. By moving our facility from San Angelo to Dallas, we will have a more centralized location to train and upskill our people, promote greater consistency across the organization, and create additional opportunities for employee development. We continue to navigate higher fluids, fuel, and other commodity-linked costs.
Monthly lube oil costs exited the quarter approximately 25% higher than in the first half of the year, while diesel prices reached an all-time high in September. These increases weighed on our second and third quarter results, but were largely offset by strong synergy capture. Nonetheless, they present a near-term headwind that is not currently reflected in pricing to our customers. Additionally, labor costs across the industry have increased at a faster rate than anticipated, with the higher cost bases largely incorporated into our third quarter results. Despite these pressures, we remain focused on disciplined execution in the areas we can control and continue to look for opportunities to get the most out of the combined platform. With that, I'll turn the call over to Chris Paulsen.
Thanks, Chris. For the third quarter, total revenues were $357.2 million compared to $250.3 million in the prior year period, an increase of approximately 43%. Contract operations revenue was approximately $308 million, driven primarily by the addition of acquired horsepower and higher average revenue per revenue-generating horsepower. Retail parts and service revenue was approximately $30 million, including sales to affiliate parties, and benefited from the timing of certain manufacturing unit sales that occurred in September rather than the fourth quarter. Third quarter net income was $47.3 million. Operating income was $102.2 million. Net cash provided by operating activities was $117.7 million, and cash interest expense net was $47.3 million. Adjusted gross margin percentage was 62.2%, down modestly from the second quarter, primarily reflecting the commodity-linked cost pressures and a higher mix of parts and service revenue during the quarter.
Turning to our operating metrics, total fleet horsepower at quarter end was approximately 5 million horsepower. Average revenue per revenue-generating horsepower per month was $23.14, up approximately 1% sequentially and 8% from the prior year period. Average revenue-generating horsepower was approximately 4.48 million, and average utilization was 92.1%, slightly higher versus the prior quarter. Third quarter expansion capital expenditures were $87.7 million, and maintenance capital expenditures were $18.5 million. Expansion capital primarily reflected the new units and reconfiguration supporting the growth of our contract compression fleet, while maintenance capital remained consistent with the needs of our larger fleet. Turning to guidance, as Clint discussed earlier, we are tightening our full-year Distributable Cash Flow guidance to $495 million-$505 million.
Lower cash interest expense and cash taxes are helping offset a portion of the pressure reflected in our cost outlook, leaving our cash flow outlook in line with expectations entering the year. We are narrowing our full-year Adjusted EBITDA range to $770 million-$780 million from $770 million-$800 million. The revised range reflects the higher operating costs Chris discussed, as well as softer retail parts and service revenue than previously expected. We continue to expect maintenance capital expenditures of $60 million-$70 million and expansion capital expenditures of $230 million-$250 million, inclusive of the modest deposits tied to limited 2027 new unit orders from third parties. Leverage for the quarter was 3.78x and remained in line with our 3.75x target during the quarter, even as we accelerated capital spend and certain financing costs.
In September, we issued $600 million of 6.750% senior notes due 2035 and used the proceeds to reduce the borrowings under our ABL. This issuance at near historically tight energy spreads and a 10-year Treasury rate much lower than today enables us to remain patient in addressing our March 2029 maturities. At quarter end, we had approximately $1.06 billion of available capacity under the ABL facility, providing meaningful liquidity and financial flexibility to execute against our longer-term capital allocation priorities. Those priorities remain consistent: support a sustainable distribution, invest in attractive organic growth opportunities that grow our underlying net asset value, and maintain a prudent leverage profile while preserving the flexibility to pursue compelling inorganic opportunities within that framework. With that, I'll turn the call back to Clint for concluding remarks.
Thank you, Chris. Before we open the call for questions, I want to thank our employees for their continued hard work and dedication throughout a year of significant progress, and for their willingness to embrace and elevate USA Compression's culture of safety and putting our customers first. Their efforts and execution are what continue to drive our success, and I am thankful for our entire team. With that, I will open the call up for questions.
We will now begin the question-and-answer session. Please limit yourself to one question and one follow-up. If you would like to ask a question, please press star one to raise your hand. To withdraw your question, press star one again. We ask that you pick up your handset when asking a question to allow for optimum sound quality. If you are muted locally, please remember to unmute your device. Please stand by while we compile the Q&A roster. Your first question comes from the line of Doug Irwin with Citi. Doug, your line is now open.
Hey, team. Thanks for the question. Wanted to start with some of the contracting activity you talked about during the quarter. Could you maybe just provide a bit more context here about how your customer conversations are progressing? Are you maybe seeing a little more of a sense of an urgency from your customer base here now that we're a bit deeper in a longer lead time environment and the demand outlook here seems to keep expanding pretty quickly?
Doug, this is Clint. I will start off, and then Chris Wauson may chime in here. We are seeing customers with the long lead times, customers are working to get their contracting done sooner. When you are talking about four years to get a compressor, 185 to 200 weeks, somewhere in there to get an engine, there is definitely an urgency to make sure they have equipment for what is coming down the pipe, when you are talking about demand growth between now and 2029, 2030. So yeah, I would say we feel like there is an improvement there. Chris, you want to add?
Yeah, just to add a little bit to that, maybe said a different way too. With the tight supply and long-term planning cycles, customers are securing horsepower further out, but not for specific locations. It is more of a, they are running off a forecasted growth curve, so they are trying to get horsepower to meet those curves, just not 100% sure where it is going to end up.
Yeah.
Got it. That is helpful. Maybe a follow-up. It sounds like J-W synergies were maybe a nice tailwind on the quarter, helping offset some of the cost inflation. Just curious, now that integration is complete, if you could maybe just provide an update on where you might be trending versus some of the initial synergy guidance you laid out, and if that could keep being kind of a nice uplift on gross margin here into next year.
Yeah, Doug, I think you said it well. I think many of these synergies were captured in our Q3 numbers, but remain opaque and will probably show up when commodity-driven input costs fall. Right now, given where we were with our fuel cost, with our lube cost, and those relative increases, you are not able to see those synergies take effect in the way in which a lower commodity price environment you may see it. As it relates to 2027 synergy guidance, we do not have anything at this stage other than, as we have noted, within one of our filings this quarter, we did invoke some DCS synergies that we anticipate for next year associated with moving contract compression to MLP status and the related cost savings there on the DCS front.
Your next question comes from the line of Jim Rollyson with Raymond James. Jim, your line is now open.
Hey, good morning, gentlemen. Just kind of circling back on the margin question. I guess, Clint, if you think about where costs are today for fuel and lube oil and things like that, and some of the J-W integration impacts, I think it was mentioned on the call in the prepared remarks that your contract pricing today is not really reflecting the higher costs. How do you think through this if oil prices, let's just say, remain elevated through next year? How long does it take to actually start seeing your ability to capture that in rates and actually show margin improvement?
That's a good question. We start off and talk about margin. We knew when we brought in the J-W acquisition that we were going to see a little bit of margin degradation from our normal contract business. With that said, it was a very small percentage. Then if you look at our contract compression, those margins remain very well. But when you have the higher inputs of third-party sales and AMS that we had for this quarter, that pulls our margin down. Now, when you're looking at going through next year with higher commodity prices, we will start to push some of that out with escalators as we move forward into next year. But, I mean, you hit the nail on the head. It's really hard to know where oil prices are going to be through next year, crude oil prices driving lube oil prices.
There's a volatility there that we're doing the best we can to prepare for. I don't know. You want to add anything to that?
Yeah, just to maybe add a little bit more. Just keep in mind, our core contract services business is slightly above Q1. Despite increases from our commodity-linked costs, operations is executing very well.
Yeah.
We are super pleased with where we are at. We have horsepower coming month to month, so there is our ability to grab some more rate increase. We are doing that as those contracts come and we renew new contracts. There is a little time delay, so keep in mind, it is not immediate. There are two or three months there where we want it sooner, but sometimes it is just the nature of the beast.
Understood. No complaints, just waiting for that kind of coil spring effect that seems to be building. Maybe for Chris, I know you are not giving guidance for next year, but as I think about growth CapEx for 2027, I guess we should be just thinking about the kind of 2.5% annual fleet growth that you laid out a quarter ago, and maybe whatever pick your price on cost per horsepower is kind of the right place to triangulate?
That is right. I think, ultimately, we will provide that guidance in a few months, and that guidance will be predicated to some extent on timing of deliveries, and those timing of deliveries are still fluid. As we laid out, Jim, 2%-3% is the right number. We will also look at the respective cash sales that we will consider with manufacturing as well. We are talking to our customers both on the cash sale front, the contract compression front, and then ultimately, we will decide on the final contract compression numbers that will go into the growth capital.
Perfect. Appreciate that color. Thank you, guys.
Your next question comes from the line of Eli Jossen with JP Morgan. Your line is now open.
Hey, thanks for taking the question. Maybe if we just think about the optionality to extend term with customers, are you guys kind of seeing that? Are they looking to sign longer contracts? How do you kind of balance that with elevated spot prices, and how have those conversations kind of evolved in the past year or so?
Yeah, thanks for the question. It's Chris Wauson. To address that, our customer conversations, we're targeting anywhere from a two to six, seven-year term, right? It just depends on how things are looking from a customer standpoint, where they're at in their cycle, and that couples with ours as well. So, we are still having great contract term lengths. I'm not going to say that it's all four or five -year terms, but there are some two and three-year terms out there that we are taking. So, it's still very positive. The commercial team is doing a great job with keeping our term secure.
Awesome. Then, I know that kind of leverage continues to trend positively and coverage as well. Can you just remind us kind of what the bogey is if you were to start to think about a distribution hike and how that fits into your kind of broader capital allocation framework heading into next year?
We don't have a bogey per se in terms of the distribution hike. As we look at our capital allocation framework, we look at our opportunities to invest within the core business. Core business remains extremely strong. We've been able to increase that relative growth in anticipation of a 2%-3% annualized look, not only next year, but going out a little bit further. So, if through 2029 into 2030, our opportunities to invest in the business allow for us to have returns that earn far in excess of our cost of capital, we're going to look very strongly at investing in those. Our near-term leverage target is around 3.75x . We're there. We need to continue to evaluate whether or not that's the appropriate target through cycle, as our business grows in size and capacity.
Then we need to have those discussions in concert with our board as to our distribution. Been very pleased to see that distribution coverage continue to increase. It's increased quite a bit since I walked in the door in November 2024. That's largely through the efforts of the team here and the team in the field. To see our numbers and the move from the 1.4 to the 1.65 range is a terrific outcome for the company, and we're really pleased at where we are. The other thing I'd point to is, we are delivering and returning capital to our unitholders in a way in which other companies within the space just are not.
Plainly, we're not only de-risking the business and doing it in the way in which we do it today, but we're also realizing the excess returns associated with growing the business as well. So, we keep all of that in mind as we try to triangulate around the right answer. I think it's a great question. It's one that's a fair one to continue asking, and we continue asking ourselves the appropriate way in which to allocate capital over the next many years. Some of that is somewhat dependent upon where you think you are in the cycle of the compression business within the lower 48.
Your next question comes from the line of Nate Pendleton with Texas Capital Bank. Your line is open.
Good morning, and thanks for taking my questions. With the improved geographic outlook, and really the depth that J-W has provided, can you talk about how margins compare when we look at the Permian versus other areas such as Gulf Coast and Northeast?
Yeah, Nate, it's Chris. Good question. I will say that our margins are actually pretty consistent across the company, so there's not really one region way ahead of the other. We do a great job. Operations has our culture across the company. That message is the same and consistent across the entire organization, so our operating philosophies are much aligned across the entire U.S. So, I'm super proud that our margins are very consistent across this business.
Got it. Thanks, Chris. Staying on the additional capabilities you guys brought in-house, with the, specifically on the parts and services side, can you talk about the growth outlook there and how margins are trending, given some of the shop space that you alluded to in your prepared remarks?
Yeah. Growing that business does affect our historical contract services margins. We look at it as a positive. The more we do there, that's more EBITDA contribution and DCF. We look at it as very meaningful and impactful to the business.
It's an area where, overall, there is a focus on growth going forward. As others in our space have experienced, the ability to ramp up through this year has been a little bit slower going, and we noted that within the quarter. As we look towards next year, it continues to be a focus, and I think that focus will really be somewhat dependent upon commodities. Do people continue to defer some maintenance that's out there? Do folks ultimately ramp up the parts side of the business, which we very much have a focus on? I think it's a natural area in taking in J-W that we felt like we ultimately could start to move the needle on. That will be a part of focus for next year. But ultimately, we're seeing companies at $95, $100 oil continue to run equipment harder for longer.
At some point, I think that will start to bear out in terms of some more consistent parts and service revenue on a go-forward basis. But again, it's a lumpier side of the business, as Chris Wauson alluded to, dependent upon the manufacturing contribution of the business, the parts and service contribution of the business. Our ultimate operating margin may vary from quarter to quarter, and we're still appreciating that difference in terms of and how the complexity of that difference relative to our legacy USA business pre-J-W.
There are no further questions at this time. I will now turn the call back to Clint Green for closing remarks.
Yeah. As always, we really appreciate everyone joining our call. We are super proud of the execution that we have accomplished this year with lots of change and integration and moving to a new ERP platform. We are really happy where we are at, and we are happy about the. We are excited about the future through 2027, 2028, and years beyond. Today is the day we get to exercise our right as Americans to go vote, so if you have not done that, go vote. Thank you for joining our call.
This concludes today's call. Thank you for attending. You may now disconnect.