Ladies and gentlemen, good day and welcome to the Schaeffler India Limited Q2 CY 2026 earnings conference call. As a reminder, all participant lines will remain in the listen-only mode, and there will be an opportunity for you to ask questions after the presentation concludes. Should you need assistance during this conference call, please signal the operator by pressing star then zero on your touchtone telephone. Please note that this conference is being recorded. I will now hand the conference over to Ms. Gauri Kanikar, Head of Investor Relations, for opening remarks. Thank you, and over to you.
Thank you. Good morning and welcome everyone to Schaeffler India Limited's earnings conference call for the second quarter and half year ended 30th June 2026. Today we have with us from the management, our Managing Director and Chief Executive Officer, Mr. Harsha Kadam, and our Director of Finance and Chief Financial Officer, Ms. Hardevi Vazirani. Mr. Kadam will first take us through a short presentation on the results, and after which we will open the floor for questions. Thank you, and I now hand over to Mr. Kadam, please.
Hi, good morning. Good morning to all the investors. A warm welcome to this earnings call.
Good morning and warm welcome to our second quarter and six months closing call.
Okay. Let me start by taking you through the presentation. I hope you already have it open. I would like to move to slide number three. As always, I would love to start with the customers and the recognitions that we receive from the customers, q uarter two has been a very strong performance and recognitions coming from the customer side as well. As you can see on the slide, we have had many awards being given by the customers, starting with on the industrial side from White Turbo. We also had from Sandvik Mining as well on the industrial side, recognizing us for focused development and cost reduction activities that we carried out.
We have had quite a few coming from the automotive space as well, our esteemed automotive customers award given by John Deere, Toyota Kirloskar as well, and appreciation awards coming from Denso India as well. Not to mention the Escorts Kubota as a special category award that has been given for our long association as well. Apart from this, the corporate social responsibility work that we carry out consistently with sheer commitment, we were awarded for our community development projects that we indulge in. Some of the work that our team has done in developing the tribal areas has been recognized by the CSR convention, and an award was given to that effect as well. What is also important and prestigious is to point out the zero PPM award for quality that we have received from one of the most stringent quality demanding customers, Toyota Kirloskar.
We received the award for a zero PPM, which clearly signifies and underlines the fact that our commitment towards quality, ensuring that our customers get zero-defect product continues, and we stay the course with this. I would like to now move on to slide number four, I would cover three parts in my agenda today. Starting with the economy and the industry. I would like to throw light on the business performance, Q2, as well as the six months. A little more on the financial performance for the same period, Q2 and six months. Let me move to slide number five, what you see on the slide is the economic situation in the country. Drawing your attention to the bar chart that shows the GDP.
While the first quarter Q1 calendar year, that is January to March, registered a 7.8% GDP growth, the quarter two estimates are hovering around 6.5%-7%. The official numbers are still to come in. It appears there has been a marked slowdown, obviously, with all the geopolitical situations that are redefining the business rules even in India. I will come to that in my subsequent slides. Talk about the index of industrial production has managed to show a better performance over the preceding quarter, and it continues. The manufacturing output is definitely there, it's continuing. The demand as well has improved in the last two quarters. Automotive production too has continued to register a strong double-digit growth rate compared to the previous year.
Q2 being a financial year start for many of the auto OEMs, you would see it always starts off on a low-key note, it tends to pick up. Marginal growth or even a small drop you could see over the preceding quarter, yet a strong performance when compared to year-on-year. A point of concern that has started to emerge is on the inflation. The Consumer Price Index, as you can see, has started to creep up. For the last six quarters, when you look at it, the first four quarters showed a very good trend, then it has started to go up rapidly, currently the Q2 estimates are showing 3.9%. With all the input costs going up in the manufacturing sector, plus the food prices going up, it's clearly reflecting in the commodity prices that are going up as well.
I move to slide number six on the core industrial sector performance, what you see there is a very strong performance for the last six months, January to May, five months, I would say. With cement production month after month, much, much better than the preceding month, as you can see, same period last year. Surely the infrastructure drive by the Government of India is clearly pointing to the fact that the core sectors relevant to the infrastructure growth have been demonstrating a pretty strong growth. Cement, the same you would see in the steel sector as well, growing at 6% over the last year. Talk about coal production. This is where you see a shift happening, being clearly in line with the carbon neutrality and the use of renewable energy directives.
You would see the coal production come down over the last two months consistently, whereas the electricity generation still is on the positive side, which means clearly the shift is more towards the renewable energy sector. On this backdrop on the industrial sector, the positive notes on which the economy and the industry is performing, I would like to now move to a slide throwing some light on the automotive sector. What you see on the slide is the two and three-wheeler production numbers. As I said earlier, the manufacturing industry and the manufacturing sector output is really doing well, that is clearly evident in each of the segments that you see here. The two and three wheelers, as you can see, has also registered a very strong growth.
Even compared to the preceding months, has started to do well, except the passenger vehicles where we did have a sharp drop of almost 8% drop that we have seen in the month of June over the month of May. Compared to the last year, a very strong growth there again, which I already said about 15.7%. Talking about the commercial vehicles, again, month of June has been pretty strong. Compared to the last year, it's a big jump. Over the preceding month of May as well, strong performance there from the commercial sector in terms of the production numbers that is there. Tractors, again, is demonstrating a good direction. This is something that now we have to monitor closely due to the not-so-good performance of the monsoon is what we are hearing.
I guess the monsoon can always be delayed and we'll have to wait and watch how this pans out, and how this is going to impact our business. A lot rides for us on the tractor business as well. That said, let me now move on to the business highlight. I draw your attention to slide nine, wherein I'm going to talk about the quarter two performance. As you can see, the revenue generation in the quarter was INR 2,681 crore, which is a clear 17.5% higher performance compared to last year. Over the preceding quarter, Q126 was a 7% higher performance. This is in spite of the fact we have had challenges with the automotive sector production numbers, particularly in the passenger vehicles, where there was a drop in Q2 production numbers.
With all the geopolitical volatility that still exists and the input costs that have gone up as well, we have been able to post reasonably very good performance, I must say, in a challenging quarter. This has come in spite of the drop in the passenger vehicle production numbers. We have been able to still arrest any adverse impact from the passenger vehicle segment. One, because of all the new business wins, which I will come to in a while, but also our sustained effort in trying to maximize the capacities in our plants through business increases with our existing customers and the new projects which we're also realizing for business as such. We have seen a good growth in our vehicle aftermarket solutions. Obviously, this is because of some of the capacity advantages we were able to leverage there, and the REPXPERT business did pretty well as well.
Let's look at the company as a whole. While it registered a single-digit growth, and we're still on a positive traction there. That said, when you look at the earnings quality, we were able to deliver INR 513 crore in EBITDA level in the quarter, and that's clearly a 19% better performance than last year and the preceding quarter as well, resulting in a profit after tax of INR 336 or INR 337 crore, which is about 12.6% profit after tax. We also did register reasonably good free cash flow. Obviously, this has been a little lower. There are attributable reasons to it. Our input costs going up, our inventories have gone up. Particularly, this is a strategic step that we have taken to shore up inventories in some of our business sectors, and hence, that has impacted the free cash flow.
To point out is some of the adverse situations that we faced with the LPG and the oil prices going up. Our input costs have gone up, which is yet to be compensated by the customers, which we are still in discussions with them. Add to that, some freight cost increases which have impacted the bottom line here and some of the IT costs that came in the quarter as such. Overall, our CapEx also remains on track. We continue to invest appropriately as needed in line with our strategic growth direction. Inventories is something which is clearly we are watching. Whatever inventory levels we have built up is clearly a planned inventory levels in line with the situation, evolving geopolitical situation and the market demand in the country. That said, I move to slide 10.
As usual, I always love to talk about the new business wins because this is what keeps us going and sustains our growth momentum. Every business vertical that we operate in has brought in quite a lot of new businesses. On the Automotive space, some of the new business wins, again, the demand for the double clutch in the tractor segment. More and more adoption of double clutches is being now used by the tractor segment, and we have been benefiting from it. The other one is the business win for the overrunning alternator pulley, which actually brings in the compactness in terms of the package that you deliver to the customer and the overall package of the entire system as well. We have been consistently working on that, and the business wins we secured here with some of our prestigious customers.
On the Vehicle lifetime solutions, we have started to increase our market coverage. One step that we took is to, after a gap of two years, we revived the use of the REPXPERT vans, which is going to travel across the country, covering close to 8,000 km to be in very close contact with the mechanics and to upskill them, in terms of training, in terms of fitting our solution, and also to educate them on the upgraded technologies that we are adding on to existing offerings in the marketplace. There are very focused campaigns and workshop engagements that are being done through the REPXPERT. Our portfolio of expansion, particularly in the INA product portfolio, is something we are focusing on, and we have started to bring more products from the INA range into the market, for the aftermarket.
Bearings & Industrial Solutions has been a stellar performance in the quarter in terms of new business acquisitions. We have secured a lot of business opportunities and wins already in the quarter, particularly in the product portfolio of cylindrical roller bearings, DGBBs, spherical rollers as well, even TRBs for that matter, and some of the plane bearings for the raw material sector as well. A variety of applications. I think one of the largest business acquisition, highest value has happened in the Industrial space, in the second quarter. I move to now slide number 12, which talks about the earnings quality and the financial performance.
Talking about the revenue from operations, as you can see, in the second quarter, INR 2,681 crores came into the system through the revenue route, which is a clear 7% better performance or growth than the preceding quarter of Q1 and a 17.5% compared to the same period last year. That said, where did this come from? As you can see from the table below, the Automotive technologies brought in 33% growth compared to year-on-year. Vehicle lifetime solutions at 9.9%. Bearings & Industrial grew by about 5% on an average over the year. Our export business grew 24%. Over the preceding quarter as well, while the Vehicle lifetime solutions and our exports grew double digit, the other two, Automotive as well as Bearings & Industrial Solutions, also grew albeit a single digit at 3.6% and 6.5% respectively.
With this, the demography of our sales mix, 35% of our revenue comes from the Automotive Technologies, and here the Automotive Technologies includes the e-mobility part of the business. The Bearings & Industrial Solutions brings in about 35%, and the rest is split between Vehicle Lifetime Solutions, 12%, and our exports, which is at about 17%. All in all, a strong performance in the second quarter with all the challenges that we had, primarily on the supply chain side and on the input cost side, we have been able to demonstrate a consistent strong performance. With that, I move to slide 13, which talks about the earnings quality. What you see here is the EBITDA numbers. INR 513 crore coming into the system at 19.1% EBITDA, which is a clear 6.3% increase over the preceding quarter and a 14.3% better performance than year-over-year.
Now to just look at the split on where did this come from. The gross margin improvement brought in about INR 147 crore. We did have some cost on the employee cost with the new labor codes coming in as well, the wage codes that are being implemented now, and some of the other income expenses. Net has been a strong performance at the EBITDA level, resulting in better profit after tax at INR 337 crore as against INR 320 crore last year. Overall, the earnings quality definitely could have been better. We did get impacted on the foreign exchange FX route as well, input cost route, and both these have impacted to a certain extent our bottom-line performance. Nevertheless, we still have done reasonably good compared to last year. I move to slide 14 and talk about the working capital.
As you can see in the quarter two, our working capital has gone up to INR 2,029 crore. Clearly, this is a planned activity that we have lined up as we are building up inventories in some of the specific sectors for some of our specific customer accounts. This is a planned activity, and we have a clear plan of how to manage this going forward as well. CapEx on the other hand remains more or less the same level. We continue to invest in expanding manufacturing capacity and which we believe is clearly needed if we have to sustain this growth momentum in the country and continue to deliver a double-digit growth ratio. Free cash flow certainly is under focus, and we have work to do here as well.
Clearly, one of the impact is coming because of the increased working capital and the reduction in the earnings, which we believe in the second half of the year, we're going to recover the lost ground going forward. I move to slide 15 and talk a little bit on the key performance indicators or snapshot. As you can see at the segment level, our revenue growth is about 18% compared to the last year. As you can see, with an EBITDA margin of 19.1% in the quarter, resulting in a six-month EBITDA of 19.2% and EBIT margin of 15.8%. Profit after tax too continues to remain at the same state of 12.6, 12.7% at a six-month period as well. All in all, top-line growth, yes, we have managed to increase that.
Bottom line, we have held our ground very strongly here in spite of the challenging situation in terms of input cost and some of the foreign exchange increases that we have incurred. With that, I move to slide number 16, where I want to throw light on the KRSV Innovative Auto Solutions, a wholly owned subsidiary of Schaeffler India Limited. Here again, the KRSV, Koovers, as we call it, registered a revenue growth of INR 79 crore in the quarter. An EBITDA still we are in the negative here, as the focus is on scaling up the operations. While we have registered good revenue growth of INR 79 crore, exactly delivering as per the committed plan that we have made, we still have some work to do on the bottom line on the EBITDA and EBIT side. That's something we are addressing it as I'm speaking now.
Overall, at a consolidated Schaeffler India Limited, both entities put together, the revenue generation has been INR 2,760 crore at an EBITDA of 18.5% and an EBIT of 15.2%. I move to now the last slide number 17. Overall, has been a pretty good quarter in terms of our business performance in spite of all the challenges that we are facing on the geopolitical side, on the supply chain side, on the input cost side. Year-on-year, double-digit growth is something we have been delivering consistently, and we were able to sustain that coming out of the Automotive Vehicle Lightweight Solutions and our export business. Marginal impact, as I already said, input cost increases as well as freight cost increases and also the FX impact have impacted margin and our bottom line.
Again, it's a decimal point drop, but we have managed to hold that as well. Working capital, yes, we are monitoring it, and that's whatever I talked about on the working capital, is something that we had planned, that we need this to keep servicing our customer needs. That is something we will recover soon. The CapEx spend stays on track, and that is always there. Yes, more challenges are visible on the horizon. We closely monitor the situation, and we are trying to be more agile in trying to handle the situations in a more proactive manner. Our committed to deliver value to all our stakeholders continues to remain. Well, I come to the end of my presentation. That's it. Thank you.
Thank you. Ladies and gentlemen, we will now begin the question and answer session. Anyone who wishes to ask a question may press star and one on their touchtone telephone. If you wish to remove yourself from the question queue, you may press star and two. Participants are requested to use their handsets while asking questions. Ladies and gentlemen, we will wait for a moment while the question queue assembles. We take the first question from the line of Harshil Patel from ICICI Securities. Please go ahead.
Thank you very much for the opportunity. Sir, my first question is on our Industrial segment. It has recovered well after the dip in the last quarter, but still the growth is very soft, at about 5% YoY. My question is the portfolio right sizing now complete? Roughly how much revenue we will consciously let go? When does it return to the double-digit growth?
Thank you, Harshil. Let me talk about the strong performance in the sector. As you saw, we called infrastructure sectors contributing to the infrastructure growth. They've all done well, and actually, we have grown ahead of the market growth there. Our own sector has performed pretty strongly there. One were to look at quarter-on-quarter or even year-on-year basis. We've done well in our power transmission sector as such.
Yes, there has been impact from the wind energy, one from a timing perspective and a few from our contracting process, which is ongoing. We do have a small impact that are coming, which is something we expect we should recover going forward as well. If you look at industrial, one of the areas where definitely we are increasing the focus is to look at the distribution side, the aftermarket business side as well. Clearly that's something, in the second quarter, we did pretty good in terms of recovering over the preceding quarter, and we are in the right direction to recover. Our aspiration is to make sure the industrial business will get to a double-digit growth rate.
Of course, it has its own set of challenges in some of the sectors and we will continue to keep the watch and see how do we get this to also up to a double-digit growth rate.
Understood. Ma'am, a second question is on the export, where there has been an outperformance versus our own guidance. In the first half, we have grown about 28% YoY. This is well above your FY 2026 guidance of about 10%-12% growth, which itself you had raised from 5%-10% that you had guided during the fourth quarter. What is sustaining this momentum? Is it more of intercompany allocation? Is there China plus one deal still within the Schaeffler Group? Are there new geographical mandates? Some gains would have come from the rupee depreciation. How much of the second half visibility do we have? Would you like to revise your overall FY 2026 export guidance further? A small follow-up to this, has there been any change in the geographic mix between Europe, U.S., South Asia, and China for us?
Thank you for your question on exports. Yes, it is mainly because of intercompany allocations. What is happening is that, in the process of localization, many capacities are being built up here in India and mainly in Savli. The group is trying to leverage on the capacities which are available in India, which we are developing for local market, but there are always opportunities, if there is capacity available to serve the intercompany locations worldwide. Fortunately, the demand from all the regions, Europe, Asia-Pacific, China, it has been in the double-digit range, which is leading to the growth that we have reported. Also, we have to consider that FX is also in our favor, especially not so much for Europe, because there we have rupee billing.
In other regions like America, Asia-Pacific, Greater China, we have U.S dollar billing, so we are to some extent also benefited from that. We will be careful in future guidance due to the ongoing geopolitical disruptions. While all our efforts will be done to sustain this level of momentum, close to 15%-20% growth, you never know. We have faced this once in 2023, we are treading very carefully. From our side, we want to maintain this. The order book is solid for the year, very likely we'll maintain it.
Also, Hardevi , a very good point to add here is we never gave a guidance for growth.
Yes.
We would wish to maintain the exports to about 20%.
Yeah.
There could be in one quarter a surge in orders, which is what.
We, Schaeffler business, want to maintain.
Yeah. It has nothing to do with the growth. It is to do with what is our cap we would like to cover, 20% of 9% for the good, bad or good balance between domestic and export. That is what we answer.
To also have a natural hedging.
Exactly.
Against our imports.
Yeah.
Which is currently working really very well.
Yes.
Understood. Thank you very much for answering my questions, and all the very best.
Thank you.
Thank you. We take the next question from the line of Raghu nandhan N L from Nuvama. Please go ahead.
Congratulations, sir, on the strong results and the Zero PPM Awards. Firstly, on the aftermarket side, generally, for auto components, aftermarket is a stable business and most peers grow at high single digits in this space. Schaeffler has done particularly well with more than 20% growth, minimum growth of 20% last three years. Q2, the growth has come down to 9.9%, 10%. Considering that revenue has reached a large size, how do you see this particular segment performing? Would you say the growth will be stable going forward? Because of your efforts in terms of increasing the product portfolio, can the growth reach to higher levels?
Thank you, Raghu nandhan, for that question. Yes, your observation is exactly our observation too. We are well aware of the fact that we definitely can do much more. What we are seeing is some capacity constraints that we have, which is something that is currently being addressed. As I speak, we are trying to bring in more capacity so that we can feed both the OEM requirements and the aftermarket requirements. Invariably, in a high growth situation, the OEMs end up getting the priority and the VLS kind of takes a second preference, and that is something we do not want. We want to definitely prioritize, and we are addressing the capacity gap that we have in meeting the entire VLS demand. That is something work in progress right now. Here again, just to add, it's not just about Schaeffler capacity.
We have our work cut out in terms of our own supply chain capacities as well. A lot of local suppliers are still under development. I'm sure we will get them all to a closure so that we continue to ensure the entire supply chain is now aligned with the increased demand situation, both on the OEM side and on the VLS side.
Noted, sir. Thank you. On the cost side, trying to understand that many of the auto component and other suppliers have been facing pressures on commodity side and the pass-through happens with some lag. Just trying to understand how are you managing that situation. Also, on the minimum wage hike, which you spoke about, are you seeing the OEMs responding positively? Do you expect the compensation to be given in the coming quarter? Again, continuing the point on the cost side, other expenses in the opening remarks, you referred to increase in the freight cost and IT cost increases. This elevated level of other expenses, has it been one-off or should this level continue?
First, I will touch upon the other expenses that you mentioned. Other expenses have marginally increased. In quarter two of last year, we were at 15.1% of the expenses. Currently, we are at 15.4%. There is 0.3% increase. This 0.3% increase is covering fuel price increases, which we all witnessed. In Q1, it was only single month March, whereas Q2 is full quarter impact of the fuel prices, which is within the other expenses category. Second thing is, Harsha talked about the capacity constraint at our Hosur plant, which is leading to impact on VLS business because we are prioritizing OEMs. This capacity constraint is leading to the air freight of incoming material as well as outgoing material. While all round efforts are being made that volumes are absorbing this level of unforeseen cost, it is very unlikely that the customer will reimburse.
This customer would expect that we are doing some productivity measures, VA/VE, et cetera, to absorb such kind of cost. On wage increase, we have seen average of wage increase of 10%. Again, this is not subject to the recovery from the customer. What is recovered from the customer is indexation of FX, which we are working on currently and very likely in second half of the year, we will see some traction on price corrections, and other is on steel price indexation. Other than that, the customers usually expect that the company will implement productivity measures to absorb the increases.
Thank you, ma'am. This was very helpful. I'll fall back to the queue.
Thank you. We take the next question from the line of Mukesh Saraf from Avendus Spark. Please go ahead.
Yes, sir. Good morning, and thank you for the opportunity. My first question is going back to the pricing part of it. We've seen our gross margins expand this quarter QoQ. What I want to understand is how does the pricing work across your different segments? One is, say, either company on exports, how does that work with commodity costs and Forex? Say, with OEMs and with the aftermarket, I'm assuming aftermarket price hikes would be easier. If you could kind of just give how the pricing work across these end markets.
Thank you. Mukesh, thank you for the question. Let me start with the OEM. As you might know, the automotive industry works on an indexation mechanism, and not all commodities are put under that list. There was an earlier question on the labor wage code increases. Actually, that's not on the list. To get compensations from the customers is not easy at all. Yes, we are in dialogue with most of the OEMs. We have already been talking to them, particularly on the input cost increases due to LPG, propane, that have gone up because of the situation there in West Asia. That is something that is in discussion, and these commodities are not in the indexation list. Definitely the dialogue is going on. We will see what we can achieve.
As Hardevi rightly said, in the second half of this year, we expect some positive traction to come back. We will stay the course there. Overall, on the automotive side, this is our case. Now, regarding your question on the pricing between the segments, I'm afraid that is something I cannot give you because that would be like.
What I mean is how does the pass-through work across these segments? Like for exports with the parent, is there every quarter kind of a reset with respect to how forex is moving and raw material costs are moving? Or is that annual? Just to get some sense on this quarter, your gross margins have gone up. Just trying to understand what are the different variables in these margins.
When we talk about the intercompany exports, it is at arm's length pricing principles. Transfer prices are determined, and a true-up is done at end of the year, in December. This is the general methodology, and which is followed by every company, and it is as per the OECD guidelines.
Sure. That's understanding that part of it. Okay, just coming back to the industrial business, I think this is something that you've got many questions about. It's kind of remained, and when I look at the non-mobility side of it, the Bearings & Industrial Solutions segment within the non-mobility business, it's remained at this INR 400 crore kind of a number now for last six to eight quarters. Could you give some sense if our market shares have however remained stable in this period and it's only an end market kind of an issue? Sometimes it could be railway, sometimes it could be aftermarket. Market shares overall, have they kind of remained stable in this segment? Secondly, in your opening remarks, you had mentioned about some large order wins in terms of value, in this industrial segment.
If you could give some more color on that, if that would kind of change the trajectory on this number.
Mukesh, just to get a clarification, your question was towards the non-mobility sector. Is it?
Yes, non-mobility.
Yes.[inaudible]
Okay. As I already mentioned, one of the core industrial sectors, the raw material sector, which is the core metal industries and continuous process industries that we cater to, whether it is steel, aluminum, cement, we have seen strong traction in this quarter. Correct? Obviously, that's because of the growth in the infrastructure sector that's already happening. We have seen pretty good traction there. We've been doing well. We've been localizing a lot of parts to cater into this sector. There we are well on track, and it's working well.
Okay.
Industrial automation as a sector, yes, we are doing good. Can we do better? Definitely. That is something we are looking at, what new product portfolios that we have to add to get into this sector. The power transmission sector, we are pretty strong there. We are doing very good there as well. Good growth in the second quarter, close to 8% growth there as well. Overall, when you look at the non-mobility sectors and purely the OEM side, certainly we have done well. We are doing well there. Maybe the distribution side of the business is something we see more opportunities there, and that is clearly on our radar to exploit and move forward there more.
I would just say that on industrial non-mobility side, we have grown double digits.
Yes, yes. If you look at it purely double-digit growth overall is in the non-mobility side.
Yeah.
The automotive side of the bearing business is a little under pressure.
Right. Okay. I was just looking at the non-export also. Obviously the industrial non-mobility include exports, which has grown really well. I do get your point here. We look forward to some more improvement there. Thanks a lot for this.
Yes.
I'll get back with you.
Thank you. We take the next question from the line of Mahesh Bendre from LIC Mutual Fund. Please go ahead.
Sir, my questions have been answered. Thank you so much.
Thank you.
Thank you. We take the next question from the line of Himanshu Singh from Baroda BNP Paribas. Thank you. Please go ahead.
Yeah. Hi, sir. Thank you for the opportunity, S ir, again, My questions were also on the industrial segment. Could you just help us understand which segments have performed or improved over the last quarter? How do you see the other segments which are underperforming to kind of ramp up and help us grow into double digits?
Thanks, Himanshu, for the question. I already said that we had a strong traction in the second quarter. Over the first quarter, if you look at the numbers, we did have a strong growth in the core metal industrial sectors, which is the crux of the industrial sector, and that is where we saw good growth. We also seen good growth in the power transmission sector. There are few sectors where there has been a lag. This is nothing to do with us, it's more to do with the railways, for example, is more tender-based working. There we have not seen much of a growth yet in the quarter over the preceding quarter. Yeah. Wind energy, I did already talk about it.
Yes, we are going through some contract negotiations with some of our customers there, these are global contracts that we get into. Wind energy has seen a dip in terms of revenue in the second quarter for us. However, that is a matter of time when that's going to be resolved as well.
Okay. Thank you, sir. Just on the order wins, you mentioned that the Bearings & Industrial Solutions got the highest order wins, and also I can see that in the automotive sector, which is currently not doing so well. When do you see this automotive also coming into the growth trajectory and that should ideally help you grow in the double digits?
Yeah. Good question. OEM has been one of the challenges, yes. You are right in pointing out that we have seen a very sluggish growth there for a couple of reasons. One is the automotive bearing business is more commoditized, we carefully choose where we are competitive, and we are working towards our strength there, and we are playing the game. Hence, from a top-line growth perspective, you may see moderated numbers. However, the focus is also to secure the bottom line, which is super important for us. It is a very prudent and conscious effort that we make on the automotive side. However, clearly we are trying to adjust through cost competitiveness. How do we get more cost competitive? Can we localize the products more is something else that we are looking at. We are looking at primarily these two options.
Once we address them, yes, we will be able to get back in strongly in the game in the automotive bearings business as well.
Okay. Thank you so much, sir.
Thank you. We take the next question from the line of Varun Jain from Dolat Capital. Please go ahead.
Hi, sir. Good morning. My first question was on the KRSV Koovers side. Broadly, quarter-on-quarter, the revenue was INR 79 crores- INR 80 crores, but the EBITDA margin worsened from 13.4% - 17.3%. Why was that, and when is breakeven on EBITDA and cash flow expected?
Sorry, did you talk about KRSV standalone, or you are talking about consolidated financials?
No, I was talking about standalone KRSV.
Okay. KRSV, there are two special things in Q2. We have introduced accounting policy of sales cut-off. The numbers that you see on the top line are after adjusting the revenue recognition of INR 5.6 crores, which is impacting EBITDA. As well as we have started making the provision for founder's bonus, which is to be paid next year in the month of May for three years. This is leading to this level of margin change. It is approximately INR 3 crores impact.
Okay. By when do you expect this to break even on a EBITDA and cash flow level?
2029.
2029. Okay, got it. Secondly, on the automotive business, we have seen very strong run rate in the first two quarters, 31%, 33%. What is driving this strong rate? Is it because of e-axle or what? Is it sustainable in the second half also?
On margin side, we have been maintaining this level of margins for several quarters, right?
Yes.
We're talking about the growth rate.
Automotive technologies revenue growth rate was very high, so I was asking on that.
Automotive technologies' overall growth rate, if we see year-on-year quarter is 33.3%. Within that book, the conventional business has grown by close to 20%, and the remaining growth is coming from e-mobility. Yes, there is a timing difference for e-mobility, but also conventional ICE engine business is also increased close to 20%.
I think it is good to point out that if you look at the Q2 production numbers of passenger vehicles, it was down 8% over the preceding quarter 8%. Our business, we have not dropped 8%. We have actually improved our market share as well. We've grown our business there.
Yeah.
Yeah.
We grew by 3.3% average market dropping.
8%
-8 . Yeah.
That's an important point to add that.
This is more driven by market share gains rather than underlying vehicle volumes or higher content of vehicle. Mostly it's market share gains. Am I reading it right?
Yes.
Absolutely.
Yes.
CapEx for FY 2026 was figured at INR 400 crore-INR 500 crore, I think we have done INR 175 crore, that would put close to INR 250 crore, INR 300 crore in the second half. Will that be there? Also, can you tell us the breakup of CapEx in maintenance, automotive, industrial bearing, localization, and Hosur and Savli plant?
Yes, in the remaining period, we are expecting that we will be consuming the remaining of INR 500 crore, and accordingly, the orders have been placed for the machinery for capacity and localization. The breakup is that close to INR 170 crore is in automotive technologies and remaining in BNDIS.
How much is the annual maintenance CapEx?
For sustaining? Sustaining is very small, maybe 8% of CapEx.
Okay. Got it. Okay. That's all from my side. Thank you, and all the best.
Yeah. Thank you.
Thank you.
Thank you. Participants who wish to ask a question, please press star and one. As there are no further questions from the participants, I now hand the conference over to Ms. Gauri Kanikar for closing comments.
Thank you, everyone, for joining us today. If you have any further questions, please reach out to me at Gauri.Kanikar@schaeffler.com. Thank you, and wishing you a good day.
Thank you. On behalf of Schaeffler India Limited, that concludes this conference call. Thank you for joining us, and you may now disconnect your line.