🎁 Black Friday: 50% off Unlimited and 30% off Pro annual plans
Tupy S.A. (BVMF:TUPY3)
Brazil flag Brazil · Delayed Price · Currency is BRL
20.87
+0.55 (2.71%)
Nov 19, 2026, 6:05 PM GMT-3
← View all transcripts

Earnings Call: Q3 2026

Nov 6, 2026

Summary

Q3 revenue returned to YoY growth, while Adjusted EBITDA margin rose to 11.5% and leverage fell to 2.9x. Strong exports and efficiency gains were offset by weak Brazilian demand and uncertainty around EPA 2027.

Operator

This call is being recorded and interpreted simultaneously. To access the interpretation, click on the Interpretation button. If you are listening English, you can turn off the original Portuguese audio by clicking Mute Original Audio. Before we get going, let me remind you that forward-looking statements rest on what Tupy's management believes and expects, and on the information currently available to the company. They deal with what lies ahead. These statements carry risks and uncertainties, and they hinge on circumstances that may or may not occur. Investors, analysts, and members of the press should keep in mind that swings in the broader economy, in our industry, as well as other factors, could drive results to differ materially from what those statements point to. Today, we have Mr. Harro Burmann, our CEO, Mr. Augusto Ribeiro, CFO and IR Director, Mr. Cristian Malevic, VP of Commercial, and Tupy's IR team.

I would now like to hand the call over to Mr. Harro, who will kick off the presentation. Go ahead, sir, please.

Harro Burmann
CEO, Tupy

Good morning, everyone, and thank you for attending yet another Tupy's earnings call. In the last quarter, about 60 days into the job of CEO, I shared my first impressions of the company with you, the value it can create, and the main fronts we would work on to turn those opportunities into results. I also said then that our efforts in the second half would be focused on four fronts. First, stepping up the work and operation efficiency and quality. Second, running more production through our most efficient lines. Third, commercial discipline. And fourth, keeping working capital under control and bringing leverage down. Our third quarter results already show the strategy being put to work.

We are moving ahead with the transfer block and cylinder head operations from Betim to Joinville, and with the initiatives on cost reduction and on quality, maintenance, and service level metrics, all of which have improved from the second quarter. Together, these two fronts have already delivered BRL 150 million in gains in the first nine months of the year. We are closer to our customers, working as strategic partners to develop solutions that add value and help with decarbonization efforts. Our longstanding relationships and the weight Tupy carries in the supply chain have opened up the door to discussing economic and financial rebalancing clauses, and the effects of that already show up in our third quarter results. The operational progress is now feeding straight through to the financials.

Price recovery, cost cuts, efficiency gains, and working capital management have translated into cash generation and a substantial drop in leverage in the quarter. I will now hand it over to Augusto, our CFO and our IR officer, who will take you through the results for the period.

Augusto Ribeiro
CFO and IR Director, Tupy

Thank you, Harro, and good morning, everyone. It is a pleasure to take part in my first earnings call as Tupy's CFO. The third quarter marked an inflection point in our results, driven by the recovery in volumes in key markets and by the internal initiatives Harro just mentioned. After 10 quarters, we are back to growth year-over-year, following 10 straight quarters of declining revenue. And we did it against an unfavorable currency backdrop, with the real up 6% against the dollar. Revenue came to BRL 2.6 billion in the third quarter, up 8% year-over-year.

The standout was export sales, which grew 19%. Adjusted EBITDA rose 81%, reaching BRL 298 million, with a margin of 11.5% against 6.9% a year earlier. Margins also kept improving sequentially. It is worth remembering, though, that the third quarter is seasonally the strongest of the year. The quarter's result also takes in the effect of price recovery relating to 2026. Stripping that out, the margin for the period would have been roughly 9.5%. Net income came to BRL 54 million against a BRL 40 million loss in the same period last year. That reflects the better operating performance and an improved financial result on the back of lower interest rates year-over-year and of the stronger real, which worked in our favor on the bond coupon payment. Working capital management remains a priority for the company.

Operating cash generation reached BRL 292 million, helped, among other things, by a four-day reduction in the cash conversion cycle versus the second quarter. We also brought leverage down substantially from 4.1x in the Q2 to 2.9x in Q3 2026. That comes from the net debt falling sequentially for the fifth quarter in a row and from higher LTM EBITDA. Moving on to the next slide. Net revenue is up 8% in Q3, driven by a 10% increase in sales volume. Export revenue was up 19% and accounted for 61% of total revenue, against 55% a year earlier. This reflects higher sales volumes for commercial vehicle applications in the U.S. and in Europe. By segment, revenue in the Structural Components and Manufacturing Contracts business unit grew 15%. Three things drove that: higher volumes, value-added services, and price recovery from our commercial negotiations.

The Energy and Decarbonization and the aftermarket businesses draw more than 80% of their revenue from domestic market. These two, in particular, have been hit by tighter credit conditions, something we will come back to, and were down 33% and 11% respectively. Next slide. We turn to the Structural Components and Manufacturing Contracts business unit, where I will go through the main drivers in the quarter. Growth was driven by export markets, where revenue was up 20%. That came mainly from medium and heavy-duty commercial vehicles in North America. Since the start of the year, higher orders from fleets and dealers to the OEMs have been pushing production along the chain, and that fed through the higher sales volumes for Tupy in Q3. Physical sales volume to North America rose 26%. The main highlight was medium and heavy-duty commercial vehicles, where volume grew 87%.

In light commercial vehicles, physical sales volume was up 9%. Off-road applications also grew 9% on demand for larger engines used in non-residential construction and mining, and in generators for data centers. In the domestic market, growth of 4% came from higher revenue in value-added services, such as engine assembly for third parties. On the next slide, we turn to Energy and Decarbonization units, where the quarter was hit by lower sales of gensets and our own engines. Tight credit conditions and a tough backdrop in agribusiness weighed on demand. On top of that, potential buyers put equipment purchases on hold, waiting for a clearer read on the business environment. To offset this, we are broadening our product portfolio and taking steps to protect profitability. Now, we turn to the aftermarket business.

Sales were hit by distributors working their working capital down in response to high interest rates and by trucking companies cutting back on maintenance. Another factor was auto parts coming out of the ICMS tax substitution regime in SĂŁo Paulo, effective October 1, 2026. With that change coming, distributors adjusted their inventory levels and pushed part of their buy-in to the fourth quarter. Under the new tax model, there is no need to prepay the tax for the entire chain. Despite all this, the EBITDA margin held at its historical levels. That reflects efficiency gains at our distribution center, which allowed us to cut the number of operating shifts, as well as cost pass-through into prices. The next slide zooms in on the work we have done on cost and expense control, which has been one of the company's main priorities in the year.

We rolled out a number of actions to improve margins. Plant optimization, such as shifting volumes from Betim to Joinville, waste reduction, including tighter control of internal and external scrap rates, which we have brought down to historical levels, among other measures. Costs rose 3% on the third quarter of 2025, well below the 8% increase in revenue. That gap reflects higher sales and production volumes, with better fixed cost dilution and internal efficiency initiatives that offset the higher labor costs that came with meeting stronger demand. Gross margin reached 16.9% against 12.6% in Q3 of last year, a steady improvement across the quarters of 2026. Operating expenses were flat in absolute terms versus the third quarter of last year. As a share of net revenue, they came down to 9%. Costs and expenses will remain the company's focus through the fourth quarter and into 2027.

On the next slide, I will comment on Adjusted EBITDA and net income for the period. As I said, higher volumes and our internal initiatives helped the operating result and cushioned the impact of the stronger Brazilian real and the Mexican peso. As a result, the Adjusted EBITDA margin came in at 11.5% for the quarter. We have long-standing relationships and a meaningful role in our customer supply chains, and that allows us to pursue FX pass-through and other price recovery. We have talked about this on previous calls, and in Q3, part of that recovery came through, worth about 200 basis points in the quarter's margin. Excluding that effect, the margin would have been 9.5%. Reviewing contracts is an ongoing process, an important lever to improve our return on capital. We have not reached our full potential yet, not even in the third quarter.

Currency and the performance of some plants and business units fell short of what we expected. Management is tracking those closely and working on several fronts. Net income for the period was BRL 54 million, turning around the results in the last four quarters. Moving now onto cash and CapEx. Operating cash generation reached BRL 292 million in the quarter, reflecting disciplined working capital management and a shorter cash conversion cycle. We took BRL 126 million out of working capital versus the second quarter, and we have improved the cash conversion cycle by four days compared to Q2, and by 24 days compared to Q3 of last year. CapEx came to 4.9% of revenue in the quarter, above the level we ran in the first half. The increase reflects spending we had deferred now coming back on, in line with the strategy of preserving cash and bringing leverage down.

On the next slide, that financial discipline brought leverage down from 4.1x in the Q2 to 2.9x at the end of Q3. That came from net debt falling for the fourth quarter in a row and from higher LTM Adjusted EBITDA. We raised BRL 600 million through the Brasil Soberano program under the general working capital and export working capital lines at competitive costs for a company of our profile. Half of that came in during the third quarter, and the remaining BRL 300 million in October, to be used, among other things, for liability management. So far, we have bought back BRL 250 million of company's debentures from the series maturing 2029 and 2031. With that, I will hand it over to Cristian, our Commercial VP.

Cristian Malevic
VP of Commercial, Tupy

Thank you, Augusto. Good morning, everyone. On this slide, I will share a read on the main markets.

Starting with commercial vehicles, the North American truck market was held up with strong demand through 2026. Many of our customers are listed companies and have already reported their Q3 results, showing growth in North American truck deliveries of between 40% and 65%. ACT data also show production up 43% in the period across classes five through eight. The OEMs and the supply chain are running at high capacity utilization. As an example, part of the orders placed in the Q2 and Q3 will only be filled in 2027. For Tupy, that stronger demand is already showing up in operations in Mexico and Brazil. In Joinville, the plant has moved to three shifts. On EPA 2027, the main uncertainty is around the cost and the configuration of the trucks that will be sold from next year on.

Carriers will be able to choose between trucks fitted with the new emissions technology and options based on current technology, which may carry what are known as nonconformance penalties. In other words, the NCPs. Because the final amount of these penalties, the incremental cost of the new technology, and its benefits in fuel economy and maintenance are still not fully settled, carriers cannot accurately compare the total cost of ownership of the options in front of them. Against that backdrop, some buyers are holding off on placing firm orders until there is more economic and regulatory clarity, which affects the timing of orders. Looking ahead, though, both ACT's forecasts and our customers' public guidance point to growth in 2027. The European market is still recovering, underpinned by fleet renewal. In Brazil, despite higher truck production in Q3, the year-to-date figures are down 7%.

ANFAVEA's forecast points to volumes below 2025, held back by tight credit and by agribusiness, factors that have also weighed on the Brazilian agricultural machinery industry. In export markets, demand for off-road applications has been driven mainly by larger machines used in non-residential construction, including infrastructure and data centers. I will now hand it over to Harro, who will carry on with the presentation.

Harro Burmann
CEO, Tupy

Thank you, Cristian. We come to the home stretch of the year with a strong order book and with a meaningful role in supporting our customers' growth strategies. Over the coming months, we will step up our internal agenda, finishing the transfer of block and cylinder head production to Joinville and pushing our operational efficiency projects forward. Our commercial management will keep contributing through the economic and financial rebalancing negotiations as it did in Q3.

These are what will bring margins back to their historical levels while combining growth, cash generation, and lower leverage. The strength of our team will be essential to delivering on this agenda. Tupy has a pool of talent built up over generations, which, together with a culture increasingly built on safety, collaboration, trust, and accountability, will shape our future. Thank you all for joining in, and we will now move on to the Q&A session.

Operator

We will now begin the Q&A session. To ask a question, please click on the button Raise Hand. If your question has been answered, you can leave the queue by lowering the hand. Mr. Kiepher Kennedy asks the first question.

Speaker 5

Good morning. Thank you for taking my question. I actually have two questions. Number one is about North American commercial vehicles, a very substantial growth, 87%, right? But towards the end, you mentioned some uncertainties add to the buying decision timing. Can you please elaborate on that? What is the timeframe of those orders? Well, it is compared with a weaker basis, right? The uptake has been strong. However, they remain some skeptical. Can you elaborate on that, please? My second question is about margin gains based or from price recovering and negotiations. 200 basis points, right? About BRL 50 million. It is a non-recurring revenue, right? But how much does that represent when compared to the coming negotiations? Beyond the numbers, what would that entail down the road?

Cristian Malevic
VP of Commercial, Tupy

Thank you. Good morning, Kiepher. Thank you for your question. This is Cristian. Let me address the North American market first. Despite the EPA 2027 and all the uncertainties related to that, we do have information on the market fundamentals. This is what we have seen.

Carriers, our customers, they have recovered their prices about 20% in the past two months. So they have some room to renew their fleets, which is important to attract drivers, a recurring problem they are faced with. Drivers want to work for fleets with newer trucks. We still have a very old fleet. This is one of the oldest fleets when compared in the past nine years, which drive maintenance costs. So that will happen regardless of EPA 2027. But once it is in effect, we will go back to something that will be somewhat normal. That, of course, has changed the entire chain. OEMs had to review their chains, their processes, so they all had to adjust. There were some opportunities to buy ahead of time at a discounted price. However, during the year, existing vehicles could be sold with a smaller difference. That helped in the orders.

We have a nine-month backlog now. Normally, it would be a six-month backlog. So that had pushed the entire chain that was not expecting that sudden increase. Those delays made customers slow down on their purchase because they wanted to try the technology at the beginning of the year and then compare fuel economy with the newer and the existing vehicles. Diesel prices are at the record high, so that decrease is important in their purchasing decisions. There was not a decrease in volumes, but there was a decrease in the growth rate, and that is very good because that has helped to balance the supply chain, preventing those troughs or those valleys that happen whenever there is a regulation change. But we have seen recent results of these companies because they have not defined those differences in regulations.

OEMs cannot actually set prices and open up their orders for the coming year. Overall, we believe that the coming months will be a consumption period of that backlog for Tupy. We have orders for the entire year, and carriers have that production capacity limitation that may go through Q1 of next year with no major changes in that scenario. Let me address the second question now. The commercial recovery and that capacity to negotiate. I have been working with Harro with customers to shorten that cycle to recover prices based, of course, on contracts and on the negotiations. They are FX-linked price adjustments for raw material and tariffs. Our margin recovery cycle has been reduced as a consequence. That is a process, and of course, has to do with costs, variations as well, but it is a process that is ongoing, and it should become permanent from now on.

Of course, these numbers will vary depending on the economic situations or the economic conditions set forth in those contracts.

Speaker 5

That was very clear. Thank you.

Operator

Gabriel Tinem from Santander asks the next question.

Gabriel Tinem
Analyst, Santander

Good morning, folks. My first question has to do with efficiencies. You said you have already captured BRL 150 million in 2026. There is still some more to be captured for the remainder of the year. But what about 2027? What have you mapped out already? My second question, piggybacking the previous question, how many of those contracts have you adjusted so that I can understand the size of that magnitude of those contract renewals?

Harro Burmann
CEO, Tupy

Good morning, Gabriel. This is Harro speaking. This is a continuous improvement effort. Plants' efficiencies are closely linked on operational efficiency and quality improvements. These initial results are broken down into two parts. The first one is more focused on capacity management.

I have said that before. I believe we have two types of capacity, productive capacity and non-productive capacity. This is non-competitive. As we remove these non-competitive capacity, it is only there because customers are willing to pay, we can improve the overall efficiency of the business. That is what we have been doing. We have been focusing on products in Joinville, for both block and cylinder heads. We are going to conclude that this year, and that is the effect we are already witnessing now. There is that 1% improvement that will always take place. Kaizen, OEE improvements, and continuous reduction of scrap rates. There is continuous improvement, as I said, but the results we have witnessed now, we have captured now, will be extended to next year. Let me go back to the efficiency issue. It is only obvious, but sustainability of our margins is where it shows.

That margin recovery we have witnessed in Q3 is a stronger quarter in terms of sales, but results only appeared because we made those decisions in the past that go to that direction of having a double-digit EBITDA, which is more constant, less susceptible to the industry cycles. That is our strategic pathway. That is what we have been doing. That continuous improvement will become more and more part of what we do in our industrial units, not only in Brazil, but in Mexico and in Portugal. As to the percentage contracts, I cannot give you a percentage number. I have more contracts in Brazilian operations. That number is smaller in Mexico, but that, of course, involves OEMs. Our goal is to have the risk-sharing implemented. In other words, you share the discounts and risks, and of course, it goes both ways.

That can give you some protection for the auto parts, not only FX. I am talking about energy prices, raw material prices, labor inflation. They vary from plant to plant. I have less FX issues in Portugal when compared to the problems I have in both Mexico and Brazil.

Gabriel Tinem
Analyst, Santander

Perfect. Thank you.

Operator

Andressa Varotto from UBS asks the next question.

Andressa Varotto
Analyst, UBS

Good morning. Thank you for taking my question. I have two, actually. First one is about leverage. That was a very positive result in the quarter. There were some liability management initiatives back in October. What are the plans for the future as far as liability management is concerned? What is the expected deleveraging for the coming quarters?" Another question is about the ramp-up of new contracts. Are there any contracts you haven't operated yet? Are you going to negotiate them in the coming months? What about those negotiations that have already started? Are you working at full capacity for those contracts?

Augusto Ribeiro
CFO and IR Director, Tupy

Thank you, Andressa. As far as leverage is concerned, of course, there was substantial improvement in Q3, driven by many reasons. Adjusted EBITDA margins improvement is one of the main drivers there, of course. We've improved our profitability, operational efficiency, scrap rates are better, focusing on execution, especially those things that are under our control. Renegotiation contracts with economic and financial rebalancing contracts, and we had a very difficult end of year last year. As the 12 months of EBITDA move ahead, we'll keep on deleveraging. Our ambition is to work between 1x and 2x. That's not guidance, but this is our intention. As to liability management, we have all our debt in the capital markets.

We'll keep on looking for opportunities to apply exceeding cash or cash generated in operations. One of the ways to allocate capital is not only to deleverage by reducing EBITDA, but reducing our gross debt at the same time.

Cristian Malevic
VP of Commercial, Tupy

As to the ramp-up of new projects, thank you for your question, Andressa. We've captured some benefits as to the new contracts in the past nine months. About BRL 500 million have been captured already. But that postponement would change the mix. We keep on producing that existing products, and different OEMs are making decisions after the Class 8 legislation that are different. Some will adopt 100% of the new version. Others would like to take advantage of that fine they're going to pay. But Tupy is positioned in both groups. As you've seen, we have a larger participation in Class 8, which has proven to be a positive move.

Andressa Varotto
Analyst, UBS

That was clear. Thank you.

Operator

Marcelo Motta from JPMorgan asks the next question.

Marcelo Motta
Analyst, JPMorgan

Thank you for taking my questions. I have two, actually. Just a follow-up on the contract renegotiation. The best read of that efficiency gain is that because you actually shorten the contract between price increases due to FX, raw material price changes, or do you actually have actual price gains because you have a greater bargaining power now due to the consolidation process we've seen in the past? Could you please break down of that improvement? Does that come from price actually, or it's just because you're shortening the cycles? My second question is about costs per se. Changing the six-day workweek to five-day workweek, and Joinville is already working with three shifts. What would be that future cost impact bringing the workweek from 44 to 40 hours now?

Augusto Ribeiro
CFO and IR Director, Tupy

Thank you, Marcelo. Let me address the contracts first. Tupy operates in different industries. Some segments are serviced by two plants, just like the North American market now. Due to higher demand, we had to involve more than one plant to meet that demand. As Harro said, we have been improving our portfolio so that we can improve the quality of that portfolio. Opportunities arise to add more value, price adjustments, margins, cost pass-through. This has been conducted very diligently due to the process we have implemented. It is a bit about everything, not only for cylinder heads or engines for large data centers, pickup trucks. After recent decisions made by our customers, they are uptaking that segment again. In a nutshell, it is a mix involving several plants, several products, several industries, but the change is more related to the process itself, the way to approach contracts.

Another issue about the five-day workweek, we are still calculating that impact. Several scenarios we are working with. We may resort to automation. We may redirect some of processes that are already underway. I can shift that to the areas where I have a harder time increasing the capacity, hiring new labor, and I have higher turnover rates, and we will keep on pushing on the automation efforts. In the case of Santo Amaro, we are already working with the five-day workweek. In Betim, we have reduced the capacity dramatically. There are no impacts in the plant, and our international plants are not subject to this new regulation. The five-day workweek is focused on Joinville. I will remind you that these new regulations that were not included in previous contracts, I mean, going back to what he said before, we still are discussing with our customers to recover.

When you add it all up, our goal is to keep on improving our profitability, including the five-day workweek, and we are already working on it.

Operator

Great. Thank you. Ms. Fernanda Urbano from XP is up next. You may go ahead, ma'am.

Fernanda Urbano
Analyst, XP

Good morning, folks. Thank you for taking my question. I have two. One of them you have already mentioned, the effects of contract negotiations. When you include all of these factors and the FX effects for next year, can we consider a two-digit recurring EBITDA margin for next year, or would that be too soon to consider that as a structural number? You have mentioned data centers as a driver for the demand of large engines. Let me understand Tupy's stand. Would that be components for backup generators, or are there any other relevant applications? What is the order of magnitude? How much would that represent to the company so that we can better understand your pipeline for this kind of product in the future?

Harro Burmann
CEO, Tupy

As to margins in 2027, I have to be careful. We are now discussing the budget with the board of directors. Overall, the outlook is positive for the company. That is a fact. The North American market, which is more exposed to stronger currency, more than 60% of our revenue is in U.S. dollar. It is not only a growing demand, but with the depreciation of real, we also benefit from it. We have the innovation projects. We have been monitoring them with you. This is already reflected in the margins we presented. Our expectation is to keep on increasing the margin, comparing year-over-year. That is our goal, to go back to profitability, to historical profitability levels that were double-digit consistently.

We are working in that direction for 2027. If market conditions remain the same, 2027 will be a much better year than 2026 and 2025. As to the question about the data centers, Fernanda, products that are in large engines demand more development times. Tupy is strategically present in those regions. We can meet the needs of those customers, especially the cylinder heads. These are large parts that make up those engines, and we are part of those large projects, especially due to the backlog of these engines will become more and more relevant as these new projects are launched. Our stake there is smaller because these are new projects. These same engines are not used only for data centers. They can be used in trains, in cranes, in marine operations. We are not limited to data centers, in a nutshell.

Fernanda Urbano
Analyst, XP

That was very clear. Thank you.

Operator

Mr. Gabriel FrazĂŁo from Bank of America asks the next question.

Gabriel FrazĂŁo
Analyst, Bank of America

Good morning, folks. Thank you for taking my question. My question is a follow-up on margins. Despite the good performance in Q3, there had been some accommodation of MWM, right? Can you give us of margins breaking down between MWM and the traditional business, just like you did in the previous quarter? That would be great. If I may, my question is about tax bracket was 57%. When you read the notes in the ITR, the main headwind was the fact that occurred in Mexico. It is a non-cash expenses. These are my two questions, and congratulations on the results.

Augusto Ribeiro
CFO and IR Director, Tupy

Thank you, Gabriel. As to margins, we do not disclose business units' margins. Across the board, I would say that within Tupy's businesses, as we said, the main markets that drove performance were international markets.

The Brazilian market has gone through macroeconomic challenges, higher interest rates, which impact our business. Thinking about aftermarket, the good news is we have managed to keep historical margins, reducing shifts in our D.C. There was the reduction of taxes in the state of SĂŁo Paulo that impacted orders of our distributors, but these volumes were picked up in October. It is not a market share reduction per se, but it would impact the microeconomics, impacted the aftermarket, as well as generators. We keep on adjusting what is in our control. Costs, the company size is very relevant in that sense. Preparing for 2027. Initially, it is not a positive year for the economy in Brazil. It is going to be somewhat flattish economy for next year. While the tax bracket is cash, it is a conversion of functional currency in Mexico. That is only an accounting effect, therefore.

Gabriel FrazĂŁo
Analyst, Bank of America

That is right. Thank you.

Operator

Mr. Pedro Tineo from ItaĂș BBA is up next.

Pedro Tineo
Analyst, ItaĂș BBA

Thank you for taking our question. I would like to dive into the domestic market. We keep hearing about credit in 2027, maybe a slowdown, credit crunch, affordability issues. What is the expected market behavior? How strong will be the American market in 2027? What about prices in the local market? Thank you.

Cristian Malevic
VP of Commercial, Tupy

Hi, Pedro. Thank you for your question. As the Structural Components and Manufacturing Contracts market, especially trucks and agricultural machinery, we, of course, are dependent on credit, and it is only natural. The MOVER program brought in some incentives in the year, which has been reflected in our order. There was a significant decrease after the program was finished. In agriculture, we are going through a major recession. There are no incentives to renew fleet, and it is not only in Brazil. It happens throughout the West.

As to Energy and Decarbonization and distribution, we have higher delinquency rates impacted by, again, agribusiness. Brazil is driven by activities on farms and outside farms, and sugar and ethanol industry has been suffering as well, and that impacts that business for us. We do not see a major recovery in the coming years because the economic fundamentals that would push purchases remain uncertain. That is why exports will be responsible for bringing more revenue to the company with a more positive outlook. That is our focus in the coming quarters.

Pedro Tineo
Analyst, ItaĂș BBA

Thank you.

Operator

Let me remind you that click on raise hand to ask a question. This concludes the Q&A session. I will hand it over to Mr. Harro for his closing remarks.

Harro Burmann
CEO, Tupy

In conclusion, Q3 has shown that what we have been doing have translated into better performance results, cash generation, and leverage efforts. We keep on focusing on focus. At the same time, we will be even closer to customers, identifying development opportunities and value-added solutions. Everything we do focus on financial discipline, profitability, and return on capital. We trust the strategy and the execution capacity of our team. Thank you for joining in, and have a great day.

Operator

This concludes Tupy's earnings call. Thank you for attending, and have a great day.