Welcome to the Atlas Copco Q1 2026 Report Presentation. For the first part of the presentation, participants will be in listen-only mode. During the questions and answers session, participants are able to ask questions by dialing hash five on their telephone keypad. Now, I will hand the conference over to CFO Peter Kinnart. Please go ahead.
Thank you, operator. Good morning, good afternoon, good evening to all participants to this Q1 earnings call for Atlas Copco Group. Before I hand over to Vagner, I will, as usual, already now ask you to limit yourself to one question at a time, especially today, because we are on a very tight schedule as we will be heading to the Annual General Meeting of shareholders today. We have even a little bit less time than usual.
Without further ado, I will now hand over to Vagner, who will start today's call.
Thank you, Peter, and welcome to this conference call where we report the earnings of first quarter of 2026. First, the summary. We have seen flat orders when it comes to Compressor Technique, but very good development in Vacuum Technique. Compressor Technique, I will elaborate a little bit further because Gas and Process compressors were down quite significantly. We are not concerned about that, but we will give you more details later on. Again, Vacuum Technique, very good organic growth. We saw weaker demand coming from automotive that impacts our Industrial Assembly Solutions and Vision Solutions. And when it comes to Power Technique, we have seen growth in most business lines within Power Technique.
Our service business continued to develop very well according to our strategy, and we are also quite happy and proud to see this continued development. Organic revenues was up, which we are also quite happy about it. It was good to see a bend in the revenue trend and also stable margin despite of currency headwinds. We continue to deploy our M&A strategy, and this quarter we acquired four companies. When it comes to the financials, the level we have had, SEK 45.3 billion, is quite a strong level. We saw an increase in activity level in Q1. We were quite happy to see, mainly driven by Vacuum Technique. That led us to 5% organic growth that you will see an increase in our overall organic growth.
In Q4, we had 4%, now 5%. I think it was good to see that development. Quite happy with that. Also, revenues reached SEK 40 billion. Again, happy to see organic development of 3%. Operating margin at 20.4%. We have an adjustment in Power Technique. We have communicated in the past that we were not happy with the profit level. We took some measures, and we had an adjusted margin of SEK 8.3 billion and a margin of 20.5%. Earnings per share ended up at SEK 1.28. Strong operational cash flow, but impacted by the inventories. Return on capital employed, we end up at 20.3%.
All in all, we are happy with the development in orders and revenue, considering the level. We should also consider that we had - 11% currency on our orders received and revenues. When you look to the geographical spread of our orders. If I start with Asia, + 7%, very good development. The main driver there was Vacuum Technique and positive development as well in Industrial Technique. The negative development that we saw in Gas and Process was mainly coming from Asia. We will explain when we talk about Compressor Technique. In Europe, again, positive development despite of an environment that is not so good with all the instabilities that are going on. Good development. Also happy to see good development in North America with + 17% growth.
It's also fair to say that now also Vacuum Technique had a good development in North America. A little bit more weaker on the weak side in South America. In the Middle East, we saw a weaker development, especially in Compressor Technique and Power Technique. Those are the two biggest business areas in the Middle East. When we combine everything, then we see structural changes of 3% coming mainly from our acquisitions. Currency continued to be negative at -11% in revenues and in orders. Like I mentioned before, organic growth of 5% and 6% with the total growth of -3% and -5%.
We then look into our orders and organic per business area. You see now Compressor Technique being 45% of our business in orders received in the last 12 months and in the quarter delivered -3% organic growth. Vacuum Technique now 23% and +32%, driven mainly by semi, semiconductor market. Power Technique also delivered positive organic growth and -2% in Industrial Technique. We then go deeper into the business areas, starting with Compressor Technique, and here the industrial business in general was more basically flat, a little bit more favorable in larger compressors coming from some dedicated market segment like petrochemical, aerospace, batteries. The overall market was basically flat. Our orders for Gas and Process were notably down, like we mentioned.
Here we have high comparison base in Q1, 2025. We had basically one of the biggest orders that we ever received in Asia that was booked in Q1 last year. We managed to get one part was this big order that we had last year. On the other hand as well, we had quite a lot of wins last year and brought a very strong result into Q1, 2025. Now we have a high comparison base. We see that the decision process for some market segments that are relevant for us, it will be more step-by-step this year. Not too many decisions in Q1. The level also that we had in Gas and Process also was not so low.
I mean, we had sequential growth between Q4 to Q1, 2025 in Gas and Process, I think. We should also remember is a business that we have sometimes book orders in a quarter, sometimes we don't have, and then you create this comparison basis. Our portfolio, our quotation pipeline is quite good. There is good interaction with our customers, good pipeline. I think we will see the development over the coming quarters. Also there, we continue to have growth in our service business, and revenues were up 1% organic. We have a solid order book that we continue to invoice. Last year, we had organic growth in revenues. We believe we can continue to have good development in revenues considering the order book we have.
Operating margin at 23.8%, here we have currency headwinds and also a little bit of trade tariffs that are playing a role on the profitability. The level of almost 24% profitability is also quite good. Doesn't mean we cannot do better, but that's a good level in terms of profitability for us. Positive contribution of volume, price and mix effect. Return on capital employed, also quite solid. We continue to invest in innovation. Here you see a new type of dryer that is used together with turbocompressors, large volume of compressed air. This application, this type of dryer can be basically used in manufacturing systems, companies like semiconductor, pharmaceutical. Whenever you require very high volumes of compressed air with very low pressure dew points. Continue to invest in innovation.
When we move to Vacuum Technique, here we see, quite happy to report, 32% in orders received growth with a significant growth in the semi market. Not only, also we had positive development in the industrial market and also in scientific vacuum equipment, positive development. We have also two service divisions in the Vacuum Technique that are also growing organically. Good development. Also nice to see a bend in the trend when it comes to revenues. That was a challenge last year. Now we see a bend in the trend and a lot of focus now to ramp up production in Vacuum Technique. Profitability also was 20.5%. Nice to see as well above 20%, supported clearly by increasing volume and also improved in operational efficiency. There's still some currency headwinds as well in Vacuum Technique.
Also in Vacuum Technique, we see development continues. We just released this new turbomolecular pump that is utilized within the tool that goes into the chip manufacturing. This new pump has a quite strong improvement in terms of efficiency with a 45% performance gain. If you look to the right, to the level of orders received in Vacuum, you see that we are close to record levels that we have had in 2023. Moving to Industrial Technique. Here we had a negative organic growth of 2%, but I'm quite happy with the development in the general industry. There we saw positive development offsetting the headwinds that we have in the automotive market. Also good growth in service.
We continue to develop the service business in Industrial Technique. Revenues are flat and profitability at 19.1%, which we are happy to see the development as well, considering that they have currency headwinds and trade tariffs as well, playing against the operating profit margin. Return on capital employed at 16%. Also there, we continue to develop our product development journey. Here you see a product that was developed and is dedicated for the Chinese market, developed in China, for China. We see now quite a good development when it comes to orders in this product range in China. If we move then to Power Technique, we see also here 4% organic growth, solid growth in equipment, good growth as well in our rental business, and continued growth in our service business as well.
Good development. Revenues was also up 4% organically. Also quite happy to see that. When it comes to profitability, I think last quarter we mentioned that we were not happy with the level. We took some actions, including looking to our rental fleet, and we took a decision to adjust our rental fleet. The underlying profitability, we see a bend in the trend, and we will keep on working to continue that trend when it comes to profitability. They also had positive contribution from volume, price, and mix effect. Also there, nice innovation. We have released a new hybrid generator. What is a hybrid generator? It's a generator that combines a battery power pack together.
Regulation software is really important because not only to work with the power pack, it also work with the grid, with different systems, with the microgrid. We believe this product has been quite well accepted. We see that it is quite well accepted in the market, and we believe it can be very successful as well. Quite happy with that new development. Just a summary. Orders received SEK 45.4 billion . Very strong level. Revenues SEK 40.5 billion. EBITDA, excluding the depreciation of intangibles coming from acquisitions, the level was 22%.
To continue to talk about the P&L now, Peter will take it over. Please, Peter.
Thank you, Vagner. As already indicated, operating profit at 20.4%. The net financial items are basically flattish, and we also expect that that will continue to be similar in the near term next quarter. Profit before tax, SEK 8.1 billion, and the income tax expense of SEK 1.9 billion, which represents an effective tax rate of 22.9%. For Q2, we expect that the tax rate will be quite similar to what we saw same quarter last year. Somewhere around 22.5%, slightly lower than Q1, because we typically see less adjustments that are related to the previous year in the second quarter. This is typically happening in Q1 when we are preparing for the tax declarations and everything.
In Q2, we will see a little bit less of that, and therefore a lower effective tax rate of 22.5% roughly, is what we anticipate. If I then move from the group total to the profit bridge, to dig a little bit deeper into the operating profit margin development, starting from 20.1% in Q1 2025. A very minimal positive impact from the share-based LTI programs. As you can see, with SEK 40 million. There was an IAC item or items affecting comparability of SEK 156 million, consisting of SEK 232 million related to Vacuum Technique from last year. That was a cost then.
We also add now the SEK 76 million from Power Technique related to the adjustments to the hire fleet, as well as some restructuring costs that we initiated within the Power Technique business area. The acquisitions were, I would say almost as usual, a bit a little bit dilutive to the group's margin. The currency, of course, had a much more significant impact, negative impact, in this case, diluting the margin quite a bit. Then on the other hand, I think the very good news was that the organic development of the margin was actually quite positive. That even considering the fact that we have a negative impact from tariffs across the group.
We always said that the impact was not huge, and well below 1%, but it's still there, of course, and it basically pulls down the margin slightly. Despite that effect, we still see a positive organic development of the gross margin. We're very pleased with that development. When it comes to the currency, quite negative on the margin also as Vagner already indicated, quite negative on the top line on the orders and the revenues. How do we see the foreign exchange development for Q2? Basically, we expect that if the exchange rates remain at the current level at the end of March, then we would assume that the currency would be having hardly any effect on the margin. You could say basically, somewhere around the zero point, is what we anticipate for Q2, all things being equal, of course.
If I move to page 13, where we split a little bit further into the different business areas, I think the picture is fairly similar. On the items affecting comparability, I already mentioned the Vacuum Technique cost from last year that now comes in as a positive. On the other hand, the fleet impairment as well as the restructuring that we have done within Power Technique. The acquisition is dilutive across the different business area. For Power Technique, very minor also for Industrial Technique, very minor impact. The currency across all business areas, having a negative impact, mostly in Industrial Technique, quite dilutive.
While for the others, the impact is a little bit more mild, but still negative for all business areas. When it comes to the organic development, positive for all four business areas. Of course, there are impacts related to volume price mix that help this development, while the tariffs are offsetting in most cases that to some extent. We should also not forget that all the activities we have done over the last several years, whether it has been in Vacuum Technique, whether it's in Industrial Technique or even now in Power Technique, are starting or are generating positive results from a leverage point of view.
That is one of the reasons why we also see this positive effect despite the typical volume price mix effects that contribute across many of the different business areas. Overall, I would say even though at first sight, maybe the margin is not as high, 20.4%, the fact that the organic development is positive across all business areas is really encouraging for our team to continue working on this going forward. If I then move to the balance sheet, not so much to say here, to be honest.
The main development we see is that if we look at the asset side, is the, of course, the impact of the acquisitions, adding especially the intangible assets, but also a little bit on the property and equipment and other type of investments as well as, and that is then the second most important point in the balance sheet, I would say the development of the inventories and receivables, that we will also see back in the cash flow on the next page. Besides that, I would just like to highlight the fact that we will soon be approaching the payout of the dividend, or at least the first installment of the dividend. The ex-dividend date will be tomorrow, the record date will be April 30th, and the payout date will be on May 6th.
Moving to page number 15 in the slide deck, the cash flow. The cash flow, you could say, is operational cash flow, quite a bit weaker compared to the same quarter last year. This is not so much coming from the operating cash surplus, which is even though slightly lower, but I would say relatively on a similar level. The main detractor here is the change in working capital of SEK 2.2 billion in the quarter. Not entirely surprising that this happens in Q1. We tend to have always a low working capital at the end of the year, following lower orders, higher level of invoicing in Q4. Of course, now also adding the improvement of some of the demands, underlying demands, in Vacuum Technique, for example.
We of course, also need to prepare for that, and we are also building up a little bit of inventory, although we of course, try to monitor that very closely. From a relative point of view, though, the working capital is not really fundamentally changing. The inventories are in relative terms down, the payables are in relative terms somewhat up, and the receivables are quite stable. From that point of view, no reason for concern from my perspective.
With that, I would like to hand back to Vagner to comment on our forward-looking statement.
Thank you, Peter. Just to remind you, our forward-looking statement is not a sequential guidance. It's not a straight projection of our orders received. It's our best estimate of our customer activity level for the coming quarter. If we look to the parameters, if we look to Q1, it was already an elevated level of activity based on what we have reported now. We continue to see as well some business climate uncertainties. I think if you look to what is going on in the Middle East, also we have changes in the tariff in the U.S. once again. I think the environment also has quite a lot of uncertainties. Until now, this uncertainty has created hesitation among our customers.
You see some industrial part of our business a bit more flattish because of that hesitance. We also see that the auto market has not peaked yet. It's quite on the weak side. Not creating that opportunity to continue to grow the business. When it comes to semiconductor, you could see that we are close to peak levels we have had in the past. It was a quite strong order received. We do have a strong level of activity now in the semi, but nothing that can show us that this activity level will grow further. It's already a quite strong level. We shall also consider that the semi is a key account business. We have fewer customers, and we never know when they decide to place orders.
Based on the above and also when we speak with our divisions, based also in the conversations we have with our customers, we don't see that our activity level will further increase. That's why we believe the activity level is elevated, and we believe that our activity with our customer will stay at the current level.
Okay. Thank you, Vagner. With that, we come to the end of our presentation, and we can start with the Q&A session. Once again, I would like to repeat, especially today as we are on this very tight schedule, going to the AGM after this meeting, to just ask one question at a time. I think we will run smoothly through this Q&A session. With that, I hand over back to the operator for the Q&A.
If you wish to ask a question, please dial pound key five on your telephone keypad. To enter the queue, if you wish to withdraw your question please dial pound key six on your telephone keypad. The next question comes from Daniela Costa from Goldman Sachs. Please go ahead.
Hi. Good afternoon. Thank you for taking my question. I will ask a question about Vacuum Technique. I believe you had prior quarters mentioned that you had some mothballed or not fully set up capacity in the U.S. Just wondering if that capacity is now live, what's the utilization rate, and what will that do to contribution margin in the foreseeable future?
What we see that what we say we have the manufacturing facility that we are ramping up in the U.S., but we are prepared to supply the U.S. from our factory in Korea, for instance, that we can continue to do. We are ramping up. It's gonna take a little bit of more time to ramp up in the U.S., but we are ramping up in Korea to supply the demand that we have in the U.S. We have adjusted a little bit production capacity as well in one of our factories we have in the U.S. That we will be able to supply from other manufacturing places that we have. We are really all focused now on Vacuum Technique. It's all about ramping up production now.
Yep.
The next question comes from Alex Jones from BofA. Please go ahead.
Thank you. I can go back to compressor. You talked about industrial compressor orders basically being flat year-on-year in Q1, which is I think a small deceleration from an increase in Q4. Could you just highlight the drivers of that deceleration, whether it's directly the Middle East, you know, customer hesitation since the start of March, or just comparison base? How we should think about those factors as we think about Q2. Thank you.
Yeah. I think last quarter we had quite a Q4, 2025. We had good organic growth, mainly due to low comp in Q4, 2024. Historically, Q1 is a quite strong quarter. I'll not read too much into that. When it comes to Middle East, it was slightly negative in Compressor Technique indeed. If the main driver was as well Gas and Process, we saw lower decisions taken in Q1 may be not really related to the current situation in the Middle East. We haven't seen that impact. Talking about the Middle East perhaps is also good to remind that the Middle East represent less than 4% of our orders received. I think it's also good to put that in perspective, Alex.
Thank you.
The next question comes from John Kim from Deutsche Bank. Please go ahead.
Hi, good afternoon. I'm wondering if you could give us a little bit of color and context on what you're seeing in the semi-cap production and supply chain. Any comments or color you can give us on lead time, component availability and decision-making out of your key accounts? Reading in certain certain limiting factors like perhaps helium and industrial gases. Thank you.
I think if I start from the helium, I think that difficult to know. To be honest, difficult for me to have an opinion. What I see, at least on my side, we are ramping up production. The supply chain is also working on it to make sure we can support our customers. I think we don't see some limitations. I think we need to, the sooner we can deliver, the better it's gonna be, I think for us and for our customers as well. That has been the focus now in Q1, and definitely the focus in Q2.
Great. Thank you.
The next question comes from Rory Smith from Oxcap. Please go ahead.
Good afternoon, it's Rory from Oxcap. Thank you for taking my question. I just wanted to stay on Vacuum Technique, if I could. I just want to square your commentary there, Vagner, on the near-term activity level not increasing any further. You know, the kind of higher level industry-wide outlook for wafer fab equipment CapEx on some readings, it's, you know, it's up 35% in the last six months for the industry as a whole. Looking at where consensus is for Vacuum Technique orders this year, it looks like it's going to get back to the sort of 2022 peak. You know, if you just had any commentary there on, first of all, do you think you can get back to the 2022 peak in orders in Vacuum Technique?
How we should think about the kind of medium-term growth rate in that business beyond the near-term outlook that you've already given? That would be really helpful. Thank you.
Rory, we actually guide in between quarters, between Q1 and Q2. Like I said as well, that's also a key account business. Based on the information we have now, we don't see reason. It's already an elevated level. We believe that the levels are. We don't know if customers will decide to pull in from their planning into Q2. We don't know that. I think it's hard to say. This is based in the information we have now. I think it's a good activity level. We are quite happy after two years where we see that the orders were not really according to what we would like to, what we have been prepared for. Now we are quite happy as well with this level.
The next question comes from Klas Bergelind from Citi. Please go ahead.
Thank you. Hi, Vagner and Peter. Klas at Citi. I have a question on tariffs, maybe for you, Peter, on the new Section 232 ruling from April 6th, now 25% on the total imported value versus 50% before on the content, steel, aluminum, and copper. How is that changing your effective tariff rate? I'm trying to understand to what extent this will be an incremental headwind for you now from the second quarter, and how do you feel about the price compensation? Thank you.
Thank you, Klas. Yeah, it's quite the jungle out there with the tariffs moving back and forth all the time. Based on what we see, of course, that the 25% flat tariff on compressors and tools, for example, would definitely substitute an increase compared to where we were before. We still continue to believe that it will not create a major effect, just like it has not in the past, but it will probably increase a bit. However, there's a lot of other things going on at the same time to evaluate how these different items are exactly classified, et cetera. There's a lot of work ongoing in the background, and things are continue to be quite uncertain, to be honest.
If we would simply put out a 25% tariff out there, then that would constitute an increase compared to where we were before. It was not only the 15%, we also had other tariffs that were playing part already. As a result, it will not be positive, but it also will not be dramatic, let's say. We will continue to believe that overall, the impact on the profit margin will continue to remain moderate. Slightly higher than what we see today, but still, let's say, on a relatively low level compared to the overall margin for Atlas Copco.
Am I right just to think that we go from roughly 20% effective rate to 25% then? Is that sort of the magnitude roughly, Peter?
No, I think it's really difficult to put the exact number on there. I mean, I don't say that just to try to be avoiding the answer here, to be honest, because it is really, really difficult. This is right, like, reading tea leaves, honestly, or sometimes these tariffs. It's extremely complex. It's not only compressors, there are also other products involved. In the end, the overall impact on the overall profitability or the relative cost compared to the import value, which is not the same as the revenues, obviously, is not exactly the 25%. There is much more to it.
Again, I think it will be an increase compared to where we were before, but it will not be dramatic, and it will not change fundamentally, I would say, the impact on the profitability going forward.
Thank you.
The next question comes from Max Yates from Morgan Stanley. Please go ahead.
Thank you. Good afternoon. I just wanted to ask a question on Compressor Technique order seasonality. If, you know, when we used to look at this business kind of pre-COVID, there was never a huge amount of seasonality in the Compressor Technique business. Then, you know, we came out of COVID, and we had this dynamic of a very strong Q1, you know, a much weaker Q4. I guess if you could just update us on, you know, how do you currently think about the seasonality of this business? You know, I guess just us trying to get a better sense of how to model this.
Is it right to think that the kind of SEK 19.5 billion that you've just done is the high point of the year, and then we see sort of typically Q4 being the weakest? Has that just been market dynamics? I guess just any color on, you know, how you currently think about the seasonality for the business, post-COVID and particularly through this year.
To be honest, I don't see a big change. To be honest, Q1 is usually a quite strong quarter. Q4 in terms of orders is normally the lowest quarter. Q2 and Q3 is a bit more average. That's what we have seen over the years. I don't see a big change in that trend, to be honest.
It never used to be like that. 2019, 2018, you know, it used to be just flat. I guess I'm trying to understand, is this the new seasonality and therefore Q1 this year should be the high point?
I think we've always.
Okay.
in Compressor Technique, I think we've always worked with and lived with this kind of. There has always been a level of seasonality across Compressor Technique. Maybe it has been more outspoken in recent years, but that's, I think, more due to Gas and Process impact than it has been due to a change in the seasonality pre and post versus post-COVID. I think it's more the Gas and Process impact that has created the huge Q1s for a couple of years, 2024, 2023. That creates these huge comparison numbers of 2025 was actually also quite strong. As Vagner already indicated. The seasonality has always been there as far as I can remember, but maybe a bit less outspoken due to the Gas and Process development that we have seen in recent years.
Okay. No reason to assume this year is any different.
No. In Q4, as I already said, Q4 tends to be a bit softer, Q1 tends to be strong, and Q2 and Q3 is somewhere in the middle. Of course, then there are unique orders, et cetera, that sometimes make the quarter still stand out in a different way than what we could assume as normal seasonality. There's no very good mathematical formula, in my opinion, to just say seasonality is +4% and -3% here. There has always been a level of seasonality in the basic industrial business.
Okay. Very clear. Thank you.
The next question comes from Sebastian Kuenne from RBC Capital Markets. Please go ahead.
Yeah. Thank you for taking my question. It relates to your exposure to the semiconductor CapEx cycle. We get some idea of your exposure through the VT business, which has exposure to electronics, 60%, maybe 65%. There's also a component in the compressor business. Given that semi cycle is kind of a detached cycle from everything else at the moment, can you tell us a little bit of your stance on what your real exposure is at this moment in terms of exposure to data centers, semi CapEx, the whole branch of industrial investments?
Can you give us an exposure in percent maybe for the group? Thank you.
No. We don't have a value to share, but I would say that it's quite small compared with the size of CT. Do we have activities? Yes, we do have activities in the electronic business. We supply compressed air. They do need clean and dry compressed air, and we do supply. I think there are two factors to consider. They get the orders in different phases, because normally when they are building up premises, the fab, and the fab maybe has no equipment. That is when we discuss about compressors. Then later on when the fab is populated, then we get orders for vacuum. It is a bit, the timing is a bit different, but the magnitude is quite small. Compared to the total CT, Compressor Technique business.
The same for data centers. Do we sell to companies doing assembly of the components that goes into the data centers? Yes, we do. That is small compared to our total business in Industrial Technique, for instance.
Can we assume maybe 5% for CT, 65% for VT as a rough, a very rough guide?
No, we don't have a figure to share there.
Okay.
I think it's quite, the exposure is I would love to have a bigger exposure, but it's not that relevant. That's better for us not to share a figure.
Okay. Thank you so much.
Thank you, Sebastian.
The next question comes from Andreas Koski from BNP Paribas. Please go ahead.
Thank you, and good afternoon. Just coming back to Compressor Technique and the Gas and Process business. Could you maybe give us an idea of how big Gas and Process was in Q1, either in absolute term or as percentage of CT? Based on the strong orders that we have seen for new LNG carriers in the past six months, should your Gas and Process orders not improve in the coming quarters, or is your LNG exposure not big enough to move the needle for Gas and Process? Thank you.
No, I think when it comes to the contribution of Gas and Process in the overall CT business, we always talk about 10% because this is quite a lumping business. Sometimes you have book orders that are quite large. We can get large orders in in LNG, like you mentioned, definitely. There are quite a lot of activity in this area. I think what we see last year, we got some orders in LNG, but not only, and some decisions were taken, or many decisions were taken in Q1. We see this will be a bit more spread out throughout 2026 because different players, maybe smaller players, taking orders than the taking decisions, then the order is gonna be a bit more spread to our towards 2026.
That's what we see at the moment. We continue to have a very strong position in this market segment that I would like to highlight. When these decisions are taken, because you also have the different phases of the decision. One thing is a ship operator, ship owner, taking the decision to build the ship, and then in a later stage, our part in that ship will be negotiated with the ship builder. With the shipyard. These are different phases of the process. I can reassure you, it remains a strong player in that. If there are decisions to be take, we will play our role in that market.
Yeah. If we are seeing LNG carrier orders being up 150% or more in the last six months, should that not come through in your order intake with a, I don't know, a quarter lag or so?
I don't have a date. Depend always when the shipyard decides to place the orders with us.
Okay.
They have their own tactics on that. That's why it's difficult for us to make a strong correlation on that.
Understood. Thank you.
The next question comes from James Moore, from Rothschild & Co Redburn. Please go ahead.
Yeah. Good afternoon, everyone. Thanks for the time. Could I come back to the stable industrial compressor orders? You mentioned, Vagner, that the market's flat, but when I look at world CapEx ex, currently, it's mid to high single digit and accelerating. Short cycle demand trends are improving in cutting tools, in automation markets where you've often moved in a similar direction. I see favorable data points in China and the U.S. I would've thought that we might have seen a better picture and an outlook that starts to talk about improving dynamics. Could you, A, talk about the different regional trends? Is there any market share loss in here? B, comment on whether you see customers starting to order more on energy efficiency, given the oil price, given Iran.
Whether you think that there is an issue with all the strong buying that happened in 2023 on the supply chain with people just having overbought three years ago and still having to digest that? Just to help understand why we're not seeing a slightly better picture.
Yeah. I think it's a bit similar to what we said. Q1 is an elevated level. We don't see an acceleration in that level. If you take, if I can make a couple of comments regionally, I think our business in U.S. continue quite strong with positive development. You have some other markets like Europe, and for us, that has not been as strong as it used to be. Quite a lot of clouds in there in Europe. Let's see how that develops further, but I don't see so positive environment. You see the main market in Europe that are not so strong. You have all the uncertainties and tensions that are ongoing now, the uncertainties coming mainly from the war.
I think the impact in the Middle East in terms of orders received, we said it's below 4%, may not be so big, but if you have some consequence, the indirect impact of that, with inflation could create quite some higher level of uncertainty. That's why we guide for a bit more flattish environment. We have no signals. Our data doesn't show signals that we lose market share.
Any sign of the high oil price, you know, after Ukraine, the gas price spiked, you did fantastically. One might argue that energy efficiency is back on the map again. Do you see any sign of that in customer conversations?
No, not yet, it has the potential to, for that. Definitely. This has not been translated in more activities.
Thank you.
The next question comes from Vlad Sergievskiy from Barclays. Please go ahead.
Gentlemen, thanks very much for taking the time. A strong step up in Vacuum Technique profitability this quarter achieved with relatively moderate increase in volume, at least in revenues. If we get a demand cycle in Vacuum similar to what we saw in 2022, 2023, is there anything that could prevent you from improving margins to historical upcycle levels of, say, 23%-25%? Thank you.
Thank you, Vlad, for your question. I mean, we would love, of course, to go for a margin of 22%-23% in Vacuum Technique or in any other business area, except for CT, where we would like to do more. I think it's hard to speculate at this point in time where the demand cycle will take us. For the moment, as already indicated, we expect rather a stable development also within Vacuum Technique, given the high level we are at. Hopefully, there is more in the market, but that is what we think we can see for the moment. Of course, we have done a lot of restructuring, as we already indicated, that should generate leverage. I think it's something we definitely see this quarter happening already quite nicely in the operating margin of Vacuum Technique specifically.
Should the revenue volume continue to grow, which I think should normally follow, given the fact that we've had good orders in Q1, then we do expect that there will be some operational leverage. Now, we should also be a little bit careful because we will also need to ramp up a little bit the production and invest in a few things. Definitely all the restructuring activities we have done should generate some leverage. Whether that will immediately lead to profit levels of the absolute summit days of 2021, 2022, that I think is too early to say at this point in time.
That's very clear. Thank you, Peter.
You're welcome, Vlad.
The next question comes from Rizk Maidi from Jefferies. Please go ahead.
Good afternoon. Thanks for taking the question. Just perhaps if I go back on pricing actions within Compressor and Industrial Technique, it looks like you're struggling to offset the trade tariff impact for quite some time now. You've alluded that Section 232 is gonna become even more of a headwind. We're in a very favorable environment when you look at energy prices, and we know compressor is all about energy efficiency. I'm just struggling to understand why you're not able to offset the tariff impact through pricing. Why is it taking you so much time? Perhaps when should we expect it to sort of neutralize?
First, I think it's not only about price, it's a combination of actions. We also have a competitive landscape that we need to consider as well. We are investing in local production in the U.S. I think we have several investments ongoing there. Those investments are ongoing. Just to give a bit more concrete example, we are expanding our production facility in Albany to produce turbocompressors. We expand our facility in Babimost to produce oil-injected compressors. We are investing as well in a production facility in Rock Hill.
We are also expanding our logistics system in the U.S. with a major investment, expanding production capacity of turbo oil-free compressors for the oil and gas market in Houston. There are a lot of things ongoing that are part of the mitigation. Price is one of the components to mitigate these actions. The development, we are also developing a supply chain that is more North American focused. There are quite a lot of activities and not only price.
I just want to add that, of course, the tariff impact is included in our organic development volume price mix and other. There we see across CT, but also the other business areas, an overall quite positive picture. I think in that sense, maybe from a direct pricing point of view, we don't compensate. Overall, as we have a positive effect on the overall profit margin, we are able to basically absorb the tariff impact in the organization.
Thank you.
The next question comes from William Mackie from Kepler Cheuvreux. Please go ahead.
Good afternoon. Thank you for the time. A lot of my questions covered. Just coming to high level on the cash flow, can you provide perhaps a bit more color on how you expect the cash flow to be phased through the year and the unwind on inventories and receivables? Perhaps building on the strength of that cash flow, your balance sheet is strong. Could you provide an update on how you see the pipeline for M&A and maybe your view on current M&A pricing, given that it seems to have been a relatively quiet period for bolt-on deals relative to history? Thank you.
Yes. Thanks, William, for your question. When it comes to the cash flow, I think we expect, of course, to continue to have a solid cash flow going forward. I mean, this quarter was a bit less due to the investment in the working capital. I think we also need to be conscious of the fact that if business continues to develop more positively, that we will also see, of course, higher levels of receivables, higher levels of inventories to be able to cope with the demand, and that, of course, has a certain cost impact on the cash flow as well. I think we will continue to have a healthy cash flow, as we have always had within the Atlas Copco Group.
It doesn't necessarily impact our appetite for acquisitions, not at all. I think we have, across the business areas, a very solid pipeline across all of them. If we haven't landed, let's say a lot of projects in the very near past, then I think it's more related to the fact that the timing of the decision is not falling exactly in this quarter rather than the fact that we would slow down the activities. Because in fact, like I said, all the business areas continue to have a pipeline of many projects. In terms of pricing, of course, each project is different. Each segment has its own dynamic. I think we will always try to aim for finding the right targets at the right price.
Most importantly, having the most promise to deliver good value for the shareholder.
Thank you very much.
The next question comes from Bruno Gjani from UBS. Please go ahead.
Thanks for taking my question. It's just on Compressor Technique APAC. I think orders were down 18% year-over-year in Q1 all in, so including currency and scope, and maybe down 10% organic. The service business will have been up, so the implied organic equipment development is quite soft. Could you maybe just go into the detail into the drivers here specifically? Is industrial compressor also down meaningfully? Is this all Gas and Process? Is this all China or are other countries in APAC also down?
No, it's mainly not mentioning country, it was mainly the Gas and Process orders that was extremely strong in Q1 2025. The remaining part of the business continues. If we remove that one, we have growth in several countries. I think there is a quite big impact coming from that one.
Industrial was growing for APAC?
No. It's a bit flattish. There are countries. If you take China, it's still a challenging environment, I would say. We do have growth in countries like Korea, like India. Just as an example.
Got it. Just coming back to the energy efficiency point with compressor, I guess, how much of the energy inefficient compressor installed base do you think was replaced in 2022 and 2023? Is the TCO argument as powerful today if some of this inefficient installed base was already replaced? Could you just perhaps just discuss this very, very briefly? Thank you.
I think it's very difficult to have a figure on that one. There are quite a lot of possibilities to continue to replace machines in the market because we can replace our own machines, we can replace competitor machines. If we look from that angle, I think there are still quite a lot of potential available. On that front, I think we are quite confident that we can, over time, continue to grow the business with the product portfolio that we have. Combined with the portfolio we also have in the pipeline, because we keep on investing R&D, and we keep on improving the performance of our current product. That will unlock potential for replacement as we stretch the boundaries of technology. I think that there will be always a potential there.
Got it. Thank you.
Okay. Thank you, Bruno. With that question, that was the last question of our call for today, and we have come to the end of this earnings call. Thank you all for attending. Looking forward to meeting you at other occasions in the near term. Thank you. Have a nice rest of the day. Goodbye.