Good afternoon, ladies and gentlemen, and a warm welcome to SKF Vertevo's Capital Markets Day. It is a pleasure to have you with us here in Stockholm today, and also a warm welcome to those of you joining us online. My name is Erik Golrang, and I will be your moderator for this event. Today marks an important milestone for SKF Vertevo, as the company prepares to become an independent, publicly listed company. This is more than 100 years of automotive history morphing into something new, something exciting. Personally, I feel proud getting to participate here today. Over the course of the afternoon, we will hear from the management team of SKF Vertevo around its strategy and ambitions under the theme of unleashing growth, efficiency, and speed. Before we begin, we have a few practical points, as safety always comes first.
In the unlikely event of an emergency, please use the nearest marked emergency exit. There are several marked emergency exits in the main venue, both alongside the venue and via the foyer. If there is a fire alarm, please leave the venue calmly via the main entrance. The assembly point is right outside at Malmskillnadsgatan 25. Do not use the lifts. If you need the restroom, you will find them going out into the foyer and turning left. Just before you hit the restrooms, to the wall on your left, you have both defibrillators and fire extinguishers. In the event of a medical emergency, we dial 112. In the event of any other type of emergency, please wait for the staff to give instructions.
If you need assistance at any point with anything during the event, please do not hesitate to reach out to one of the event staff. Okay, let's have a look at the agenda for today. We will start with President and CEO Kerstin Enochsson, who will introduce SKF Vertevo's strategy and investment case. From there, we will continue to hear from the business lines, original equipment, and vehicle aftermarket, followed by a first Q&A session. After that, there is a break. When we come back, we will turn to research and development, and of course, the financial section. After that, Kerstin will come back for some final remarks, and from there on, we will have a second Q&A session. If you have a question during those sessions, simply raise your hand if you're in the room, and a microphone will be brought to you.
Please introduce yourself and the name of the organization before asking your question. If you're listening in through the webcast, there is an ask a question functionality where you can enter questions, and we will try and pick them up on stage. Finally, please make sure to have your mobile phones on silent so we avoid disruptions during the presentations. For those of you in the room, it's a relatively small place, so keep any chatter to a minimum, please. Now, it's time to hear from SKF Vertevo's President and CEO, Kerstin Enochsson. First, a small video we would like to show you.
We've been doing this for quite a while. For 120 years, we've driven mobility forward. We were there when cars went from invention to industry. We were there when refueling became recharging. Now we're gearing up to be there for the next big thing. Real progress doesn't come from speed alone. It comes from moving fast without compromising on what's important. Together with our partners, we create innovative, sustainable solutions that move people further in the right direction, fast forward.
SKF, oops, that was too far. SKF Vertevo is combining two strong and powerful elements. SKF, that is our proud heritage and the fine company we grew up with, and then Vertevo, which is standing for our future. I often get the question, what does Vertevo mean? Let me shed some light on that. Vertevo is derived from the Latin word vertere, that means to turn or to transform. Evo is the ending, meaning evolution. What you see here, it's forward movement, it's progress, it's embracing change, and that is exactly where Vertevo wants to be. My name is Kerstin Enochsson, and I have the privilege to be the CEO of our new company. I've been working in the automotive industry and the transport industry for the last 20 years.
If we see from SKF Vertevo's side, I have been on the customer side, working for both Volvo Cars and Volvo Group within construction equipment. During the last three years, I've been running the SKF Automotive Division, and out of this division, we have now formed SKF Vertevo. This journey, I, of course, have not done alone, but I've had the privilege to bring a very strong management team together, and what we are combining in our management team, and we sit here in the first row all together, is deep knowledge of SKF, and many of the colleagues have been working for a very long time, knowing the bearings market, knowing the technology really well, and how to produce world-class bearings. Then we have blended the team with automotive experts, either coming also from customer side or having worked within automotive tier one companies.
During the mingling time, during the breaks, you will get a chance to meet everyone in person. Before that, I ask you now to come up so that you know all the faces. We start with a short introduction.
Magnus Prick, General Counsel.
Good afternoon. Niclas Sjöswärd, CFO.
Good afternoon. Angela Toro, People Experience and Communication.
Good afternoon. Antonio Molle, Manufacturing Operations, Quality, and EHS. Hello. Good afternoon. Federico Galetto, CTO.
Hi, everyone. Johan Lidell, Procurement and Supply Chain.
Hello, everyone. Bastian Thomas, my name. I am in charge of regions Europe, Americas, and India. My colleague, Hao Chu, who is in charge of APAC, unfortunately cannot be with us today.
Hello, everyone. I am Fredrik Larsson. I am responsible for OE business lines and product management.
I am Olaf Henning, Vehicle Aftermarket.
Thank you very much. It is us as a team that is, of course, responsible for the company, which we are going to list in two weeks from now at Nasdaq Stockholm. But it is actually 7,400 people around the world that are super excited about being part of SKF Vertevo and becoming standalone. The largest group of those 7,400 people is sitting in China. The second-largest group is sitting in India. We have strongholds in both Mexico, Brazil, and several European countries. We are truly global player, sitting in more than 40 countries altogether and doing business in more than 110 countries. Let's see where we are starting from and how we see it. It is a truly historic moment which we are in. For 120 years, we have been in the automotive sphere, very much customer-centric, strong innovation mindset, and engineering excellence. That is where we come from.
This has brought us very far. It has brought us to a situation where we are a winner in electric vehicles. We have a very strong position in commercial vehicles, and a significant share of our revenue is derived from vehicle aftermarket. This is where we are today, and we will talk about the future. Before we talk about what is going to change and why this spin is very positive for us and our business going forward, let's have a quick look on the main facts of our business. We are a truly global player. What we do is we develop customized bearings and lifetime solutions. You see here the numbers. Passenger vehicles market, 43% of our top line, and within the passenger vehicle markets, there is the electric vehicles, which we will spend quite some time on discussing today.
We have a small two, three-wheeler market, and that is for us small relative to the entire revenue, and that is much focused on India and Southeast Asia. Commercial vehicles market, 16%, and vehicle aftermarket is 37% of our top line, much more resilient than the rest. Looking into net sales, roughly speaking, 40% EMEA, 30% Americas, 20% APAC, including China, and that is the majority of the APAC market, and 10% India. Top line last year was shy of SEK 25 billion, and this year, the first nine months of adjusted operating margin above 5%, and last 12 months, 4%. We are a truly global player, and we have a global setup as well, and we have a, say, geo-flexible footprint. That is helping us because it is balancing two things.
It is, on the one hand, balancing customer proximity, because we need to be close to where the customers are. Decisions need to be taken close to our customers. We have customized products, and it is balancing off cost efficiency. We are local with our customers. We have the majority, and that is 65% of our workers in best-cost countries, and we have a large scale with 10 R&D centers and 16 manufacturing sites. On the right-hand side, you see where those sites are located. This is where we start and where we are today. What is now happening, becoming standalone? We see that this is unleashing value through growth, efficiency, and speed. We will be refocusing on a growth agenda in the next years, much focused around electric vehicles, commercial vehicles, and aftermarket. We will be focusing our investments into margin-accretive areas. Efficiency is a large lever.
Here, we can do two things in a different way. We can build the company, and we have done this in the last year in a lean and efficient way as a company structure. We can ensure that our underlying flows, product flows, are set up as a true automotive tier one player, because today we are not set up like this for very good reasons in the past. Last but not least, our fast-forward strategy is much connected to speed, because speed is becoming more and more important. Product development of customers is becoming faster, answer times should be shorter, and being a small and nimble player is a fantastic prerequisite for speed. Just one example, now having set up the new company, we have taken out three layers out of eight to nine layers.
This is already increasing speed in decision-making, and that is much appreciated. With this agenda going forward, we are confident to be able to meet our financial targets, which you have seen already. Let me just briefly go through it. Growth above market over a business cycle. Adjusted operating margin, mid-term 6% and long-term at or above 8%. Adjusted ROCE, mid-term 10%-13% and long-term above 15%. Leverage below 1.0x, and at listing at zero. A dividend policy of 30%-50% over a business cycle. Let's start with growth, and also clarifying what is the market we are playing in. We are playing in the bearings market, both for the OE business and for the vehicle aftermarket.
Overall, growth numbers are rather decent in those markets, but what we will soon see is that there are very interesting pockets in those markets where we see much higher growth rates. Besides the name of Vertevo, where it comes from, I also get another question very often, that is, "Is electrification good for you? Does it make sense?" The very clear answer is yes, and let me explain you why. It gets a little bit technical, but not too technical. You see in front of you, on the left-hand side, an ICE vehicle, and of course, we have the wheel hubs, the four big wheel hubs with our bearings. Then you have the drivetrain and steering and suspension. Our stronghold in the ICE cars is in the wheel hubs and the steering suspension. We have no stronghold in the driveline.
Looking into the electric cars, in the driveline, we are having a stronghold. Overall, this is balancing off, because you see the amount of bearings, and these are the dots to the top. Amount of bearings are more in an ICE car, but the value of bearings in an EV car is much higher. Why is that? First of all, the electric car is very silent as a car, so the bearing shouldn't make noise. Specifications for noise and vibrations are much higher in an electric car. Of course, friction reduction, and this is our business, is extra beneficial for electric cars, as it increases range, less friction, more range, and we will hear more about that going forward. Also thinking of a car with 400, 800, 1,200 V , you understand that the current management also impacts the materials we can have in our bearings.
And maybe last but not least, we will be coming back to high-performance cars and racing cars, but the rotation speed in electric drivelines is much, much higher. So, much higher sophistication of the bearings in an electric car compared to an ICE car. At the same time, of course, we will be protecting our position in the ICE car market as well. So, now we talked a lot about electric cars and why this is better, and the next picture is then showing you how this market is growing. So overall, the passenger vehicle on the left-hand side and the commercial vehicle market are moving more or less sidewards to the next years. But looking into those markets respectively, you see that in the passenger vehicles, the EV part is growing with 12%, and in the commercial vehicles market, even with 20%.
And this is where we are focusing our efforts on. So this was a rough overview of growth, which we will be deepening in the following presentations. Let's talk about profitability. Today's level, 12-month rolling, we are at 4%. There are three different elements which we are commercing that makes us confident to reach our targets going forward. The first one is around exiting contract manufacturing, and this will help us to reduce product cost and logistics cost. And on the next slide, I will give you more details what it is and why we have it and why it is good right now, and how we will reduce it over time. So we can park this just for a few minutes. The second one, big bucket, is growth. This is giving us operational leverage.
We will be talking about our journey in electric vehicles, commercial vehicles, aftermarket, and overall, everything is, of course, enabled by innovation and our innovation mindset and our capabilities. The third bucket is connected to efficiency. We want to become a real automotive tier one pure player, with all the ingredients it means. For example, when we specify a product, now we can only focus on automotive. The specifications for materials, for design rules only need to fit automotive, but they should fit them perfectly. When we choose our suppliers, when we set up our flows, we can only focus on our business, and this will be a big change to how things have been run before, and an advantage where we see that we can reduce cost over time to become a real pure play. Another element here is also, say, reducing fixed costs by increasing utilization.
So these are the main highlights. I'm now coming back to the contract manufacturing part. Contract manufacturing is a bridging solution. It is a bidirectional contract with SKF Group, and we have it because we want to ensure continuity for our customers. Our customers need to approve if we make any changes on where we produce and who is in the supply chain. So we have asked for a lot of approvals from our customers during the last two years to make changes and to disentangle the two companies, and this is now the last step we are doing in the next years to come. But the ambition is to significantly reduce contract manufacturing midterm, and what we will be doing is that we leave over assets from industrial business to automotive business, and there is another journey to do in the beginning of next year.
We are building up our own technology, and where it makes sense, we will look for alternative suppliers for ingoing components. Why contract manufacturing is challenging? It is increasing the product cost. It is also increasing logistics cost and the net working capital because we need to take the parts and ship them in a manner which is not fully lean, and that is something we will be improving over time. Then, as we are two independent companies, of course, we are trading with a margin, and that is then dilutive for both companies. This is contract manufacturing. Now, let me, after having discussed the three elements of adjusted operating margin, go to the other bridge, and that is around capital efficiency. As you know, we will be having a ROCE target. Today, we are at around 6%, and the target is to significantly increase this.
There are also three different elements that will take us to our target. First of all, obviously, the margin effect, which we just spoke about, which is a big step in coming to the overall target. The next one is capital efficiency, both in the area of net working capital, but also in the area of CapEx investments. Niclas will, in detail, talk about those points in his presentation, but just to give you a few headlines. It is around inventory optimization, as we are more set up as a distribution company today and less as a mass-market automotive supplier. It is around improvements in the sales and operations planning of our company. It has to do with network optimization, and that is the logistics flows we have all around the globe. Exiting contract manufacturing will also be supporting.
Looking into the property, plant, and equipment part, it is to increase machine utilization, and we have been moving machines and assets between different continents to ensure that we bring the assets to the continent where most customer demand is. We are also continuously optimizing our footprint. We have been consolidating warehouses now when we have become standalone, and going forward, there will be increased capital discipline. So I have now summarized the main themes around growth, adjusted operating margin, and adjusted ROCE. I would now like to introduce the flywheel and how we see our business working. Everything starts with innovation. It is in the collaboration, the deep collaboration together with our customers that we are finding new solutions, and they are based on 120 years of deep knowledge in bearings and the bearings industry. With this knowledge, we are close to our customers in the original equipment business.
We are developing mass-market products, all customized. With that, we are creating the market. Once the car comes into a workshop for repair, we will have the spare parts available, but there is also much more than bearing spare parts, and that you will hear about later. So we are basically creating the market for our lifetime solutions and for the vehicle aftermarket business. This should have given you a main overview of our journey going forward, of our fast-forward journey. With that, Erik, I think we are handing back to you, and usually, you ask me a few questions now. Let's see.
Yes. Thank you for that presentation, Kerstin.
You are welcome.
I think if we all pick up a newspaper these days and we read some of the headlines, we learn that volumes in Europe are falling. They are coming up in China, but largely driven by exports.
How is that impacting SKF Automotive and your room to grow?
We are a global player, and we are supplying many, many companies around the world, and especially in electric vehicles, we are supplying all of the top 20 EV manufacturers. For us, basically, it doesn't make such a difference if the car is being produced in Europe or in China or in India or in South America. What has become interesting with China is that there is, of course, a domestic supply and there is an export supply in China. When cars are being produced by large Chinese manufacturers and exported, the quality needs to be really high on the components they're putting into the cars, and that is connected to service networks, which are not that large or strong outside China, and simply the willingness to have high-quality products out in the world. There, we are a strong choice for many Chinese companies exporting.
Mm-hmm. Thank you. You've now positioned SKF Automotive around EV leadership, commercial vehicles, the vehicle aftermarket.
Which one of those, if any, are you most optimistic about the growth prospects and why?
Well, all of those parts are important. We see that the EV market is growing strongly going forward. Historically, we have seen that aftermarket has had very nice growth rates, and we're expecting those also to continue. So, it's not the one or the other, but all three of them are important for our growth story. Mm-hmm.
Listening to you, clearly there is a before and an after here.
You are now saying that SKF Automotive standalone will change how the business is run-
Mm-hmm.
Change how capital is allocated.
Mm-hmm
It almost sounds a bit too easy. Why haven't some of these changes or enabling changes happened previously?
Mm-hmm. Being part of one group with many different industries to serve, there is one right answer on how to do things. Now we have the chance to optimize everything for automotive only, and this is a very competitive industry. We are very used to playing in this industry, but now we have a chance to make it right from the very start, from the product specifications to how we set up our procurement network, our logistics chain, and all the way through. We become a different company going forward.
You also highlight that SKF Automotive has been structured in a way that it will have a quite flat organization.
Mm-hmm.
To enable speed and efficiency. Would you describe the business as decentralized, i.e., are P&L decisions and so on taken further down in your organization as opposed to high up in the organization?
It is definitely a decentralized organization. Our products are customized, and the decisions and the right decisions are taken sitting with the customer on a table and by the table. We are, of course, giving the frames from headquarters, but within those frames, our colleagues are free to take decisions. This is fostering a lot of entrepreneurial spirits and a lot of fun because there is much more ownership for the business if the colleagues, if it is in Argentina or if it is in Vietnam or wherever the colleague is sitting, can take the decisions, of course, within the frames and within the key, say, design rules. That is fostering a specific culture, which is great to see.
Yeah. You outline quite material targets in terms of improving profitability-
Mm-hmm.
In terms of improving capital returns.
This is an audience and the people listening in, they are just sort of getting to know you as a management team-
Mm-hmm.
They are wondering what type of character you are. Should we think of these targets as realistic with a bit of upside potential, or is it more of a blue-sky scenario?
We have a clear strategy in place. We have very clear plans in place. We are committed to those targets, and this is how we are working. It is both the targets themselves and the plan itself, but it is also a very committed management team, a very capable management team, and together we are comfortable and feel that we can do those.
Very good.
Good.
Thank you so much.
You are welcome. Thanks.
Please have a seat. Okay. We will now take a closer look at SKF Automotive's original equipment business. To guide us through this, please welcome Fredrik Larsson, Senior Vice President, Business Lines and Product Management. Fredrik.
Thank you, Erik, and good afternoon, everyone. I am Fredrik Larsson. I am responsible for our OE business line and product management function. I have been with this company more than 20 years. I have been in commercial roles, I have been in strategic roles, and I have been in different leadership roles. So I have been working with our customers and our products over several technology cycles. The original equipment business is a core part of our business model, as explained by Kerstin before. I will now take you through that portfolio, focusing on the areas where we see opportunities for profitable growth. Let me start with giving you a foundation for that growth. It is found in four different levers. It starts with our deep customer collaboration from our diversified customer portfolio.
Then secondly, it is driven by our engineering capability to drive differentiation in technology, especially in EVs.
Thirdly, it is based upon our long position and strong position with commercial vehicles, together with a high rate of new nominations across the board. Finally, it is also based on our geo-flex production and supply chain model. So let us go through them one by one. Let us start with our most important stakeholders, our customers. Because every day, our application engineers and our frontline teams are meeting with our customers to discuss their challenges and to find solutions to tomorrow's problems. It is really those dialogues and those collaboration that is the core foundation for the value creation that we bring to our customers. These collaborations, they start early on, much before the product is designed, and often before the RFQ is even released.
The collaboration then continues through all the steps in the development cycle, from design, into testing, onto validation, industrialization, and then on through the launch and production phases. It is really this long collaboration over all those phases that makes us relevant as an engineering partner to our customers over the full vehicle lifetime. Right now, we have more than 500 of these pre-nomination, pre-production projects running with our customers all over the world. These collaborations form unique partnerships. One example is the partnership we have with BYD since 2014. We are the main technology partner on EV bearings for the biggest EV producer in the world right now. We are supplying their street car models, but also supplying highly advanced bearings into the most advanced vehicle in the world right now.
The car you see on screen here, it is called the Yangwang U9 Xtreme. It is the fastest production EV on the planet right now. Last week, this car struck the world speed record for an electric vehicle, over 500 km per hour. That is fairly impressive. We are supplying ceramic high-speed bearings into the four-wheel motors in this vehicle. We are very proud to be one of the suppliers to this customer. Of course, that brings us into a position to have a very strong position on electric vehicles. Now, onto our second lever. These collaborations and partnerships, together with our engineering capability, they have created a superior product portfolio. We are the full-range supplier of all the bearings to wheel-end, powertrain, and drive control applications for cars and trucks in all the on-road segments in the world today.
We specialize in wheel-end solutions for cars and trucks. These wheel-end products, they are powertrain agnostic. It means that the same wheel-end product delivers the same value regardless if it is fitted on an electric vehicle or if it is fitted on an ICE vehicle. These products are differentiated and designed for long life and low friction. Especially low friction is important because it provides longer range on electric vehicles, and it reduces the fuel consumption on conventional ICE vehicles, and it provides sustainability benefits to both those vehicle segments. We also deliver superior and unique powertrain products. These bearings are state-of-the-art and designed to the highest specification when it comes to high speed, low friction, and current mitigation capability. Federico will tell us more about these products later on in the R&D section here today.
Finally, on the drive control side, we deliver suspension bearings and world-class bearings for steering applications for cars and trucks. There seems to be some trouble with the here we go. This superior portfolio has also made us being the supplier to all of the world's leading 20 EV producers today. We are supplying all of them, including all of the Chinese ones. Of course, we are very proud to be able to see our products in all the EVs all over the world in the streets right now. Also, supplying the Chinese EV OEMs offer here the opportunity, as Kerstin mentioned, to follow those programs into other regions like Europe and Latin America. Having also this wide exposure to EV players and all of the automotive OEMs and tiers is very important because it offers resilience in the customer portfolio.
And resilience is very important in this dynamic industry, especially in these volatile times we are living in right now. Here we are really well-positioned to grow with electric vehicles going forward. But we are not only focusing on electrification in cars. Federico will tell us a case study on how we have developed a very strong position on EVs by investing early and continuing to innovate as the technology matures. We see now the opportunity to replicate this journey on commercial vehicles. Electrification in commercial vehicles is still very early, but it is developing fast. It is driven by needs of urban electrification, but also by technology development in battery capacity and in charging infrastructure development. But it is also driven by factors like fuel price volatility and sustainability requirements. Those are really factors that are boosting electrification in commercial vehicles into growth mode.
We are targeting two segments here. We are targeting the EV van or the last-mile delivery segment, and we are targeting the medium and heavy-duty electrification of trucks. Both of those segments are forecasted to grow at 20% CAGR to 2030 or more. Why are we well-positioned to capture that growth? Well, it is basically because the application designs and the challenges in these systems are similar or identical to the ones in electrified cars. Our solutions and value proposition are therefore equally relevant here. That is why we are well-positioned to capture that growth and support electrification in commercial vehicles. But we are not only focusing on electrification in commercial vehicles. We are already operating from a strong base position as a supplier to existing commercial vehicle platforms globally.
We supply today wheel-end powertrain and drive control bearings into conventional trucks, trailers, and buses, and we focus on durable positions. That means to maximize the uptime of the vehicle while reducing the total cost of ownership for the fleet owner. On the wheel-end side, we are one of the few suppliers that can offer unitized heavy-duty truck wheel-ends. Those wheel-end products, they are mounted and sealed for life, meaning they are minimum maintenance and maximum durability up to 1 million kilometers or more. The unitized bearing technology, it is the standard technology on the European market, but it is also developing in other regions. Again, we are one of the selected few companies that can deliver this technology globally. Another important aspect on why commercial vehicles is such an interesting segment for us is because of the long program lives.
They are 15 years, which is basically twice the length of a standard car program. That means, of course, exposure to longer revenues once you are nominated. The combination here that the long program lives, the high barriers to entry where we are in, and the fact that this is a SEK 20 billion market potential for us, makes this one of the targets where we are well-positioned to continue to grow. That brings us to the third lever. I was telling you before that we see a high rate of new nominations today. Let me take you through some of the mechanics for how does that work for us in our industry. Basically, the long platform programs on commercial vehicle creates a solid foundation for our growth. The combination of customer collaboration and a superior portfolio creates the base for new nomination.
Our wide exposure to all of the OEMs and tiers in the world gives us the opportunity to receive most RFQs that are out for new programs. We are continuously selecting which RFQs to quote in order to win with the winners. We see typically a 50% hit rate on the programs that we target. Once the programs are nominated, they will be industrialized into production to create revenue for the next 7-15 years. Right now, we see nominations that are supporting our 2030 plan. What that means in practice is that we are industrializing more volume into production than we see naturally being phased out, and that is a good base for growth. Another important aspect of our recent nomination is that we see a gradual increasing shift towards higher share of EV bearings in the production mix.
The last 12 months' nominations had an exposure of 60% towards electrification. Here, the combination of high rate of new nomination and higher value content is a good base for profitable growth. The fourth lever here. We do not only deliver value through our products. We also offer a geo-flex production and supply chain model. What that means is that we can offer a regional for regional supply, or we can have a mix of regional and best-cost country supply to give the right balance between cost and resilience to tariffs, supply risks, and political disruption or geopolitical disruption. We have a couple of recent examples where we have proven the value of this model.
During the COVID pandemic and during Russia's full-scale invasion of Ukraine, we utilized this flexibility in this model through innovative solutions to find ways to continue to supply to our customers without any disruptions. That model, and the value that we get out of this flexibility, provides trust, and trust is a good basis for growth. That concludes the four levers that we see that is driving our growth journey. We are not only focusing on growth. We are also driving efficiency improvements in the original equipment portfolio. We see opportunities opening up from becoming a standalone company, but we also see the necessity to drive change in this dynamic environment we are operating in, especially in Europe right now. Here, we are focusing to drive change in three different areas.
First, it is in relation to design to change and our transformation of our procurement function. Secondly, it is the redesign of our logistic network and setup. Thirdly, it is optimization of our footprint. Let's start at looking at design and procurement. The first thing to highlight here is the opportunity to unlock potential in design to value, especially by introducing new steel grade material without deteriorating the quality of the product. We are currently introducing several new steel routes in best-cost country, and here we see a step-up in speed of introducing new material for automotive applications that is three times higher than what it was before, and this is now enabled by the focus of becoming standalone and what that brings. The other focus area we have is on procurement.
Coming from a situation where we were controlling only 30% of our direct material spend into a situation where we are controlling the full spend gives us the possibility to streamline towards automotive requirements. Here, we can also then transform our organization and our principles into a pure automotive setup. These activities are then including activities to take out material cost, including should costing and dual sourcing to its full extent. The second area where we are driving transformation into an automotive pure play is the redesign of our logistic setup and network configuration. We see now opportunities here to translate and transform into automotive requirements, and our requirements are very much different from the ones of SKF Industrial. We see higher volumes, we see more longer-term forecasts, we see just-in-time deliveries, and we see typically shorter stock turnarounds.
Now we can optimize towards those needs instead of running the automotive business through an industrial distribution model. Here, we are targeting all aspects from planning to the warehouse network to the physical flow of products. By using modern tools such as digital twins and AI, we can now optimize our setup to have more direct flows, fewer touchpoints, less warehouses, and a fully integrated planning functionality. This will reduce logistic cost, and it will improve net working capital, and those are key elements in the ROCE and margin bridges presented by Kerstin here earlier on. The third area where we are driving change and efficiency improvements in is in relation to our operational footprint. We are constantly monitoring the effectiveness of our global footprint and adapting to market needs.
In Europe, we have a program right now to consolidate volumes within and across the factories in the region, to shift unused assets into growth areas in Asia, India primarily, but also in China, and then to insource logistic operations to get a better floor space utilization and a streamlined logistics flow. This will improve asset utilization. We will have lower cost, and we have an overall leaner footprint, as well as we provide here a strengthened base in Asia to grow from while reducing investment needs. Those are the three areas where we are driving change and efficiency improvement within. The message I want to leave you with is that the OE portfolio is a cornerstone in our business model. Through our deep customer collaboration, through our superior portfolio, and through our strong position in CV, we create a strong foundation for growth.
We see EV trends in our favor. We have a strong industrialization pipeline, and through separation-enabled efficiency gain, we are creating a differentiated OE portfolio position to win. Thank you, and back to you, Erik.
Ceramic bearings capable of more than 30,000 RPM installed in the first car ever to break 500 km per hour.
Yeah, that is cool.
Quite impressive. I am guessing you get positive feedback from BYD on that.
Absolutely.
But in general, I mean, you work with some of the best vehicle manufacturers in the world. What generally do they highlight as strengths of SKF Vertevo?
I mean, overall, I think they value most the quality and the performance of our products. They also value the engineering and innovation capability that we have. They also value the trust they can put in us, the trust that we will deliver with precision, and the trust that we will also dedicate in problem-solving once that is needed. By the way, I forgot to mention, we were actually nominated an Outstanding Partner Award from BYD at their supplier conference yesterday.
You had a picture showing a position and being a supplier to the top 20 EV manufacturers of the world. I think I counted 12 or 13 of those being Chinese. Could you say something about the history to having been able to build that position in that market, given that there are quite a few other suppliers who have struggled?
Yeah. First of all, being part of SKF Group also made us enter very early into China because SKF Group was there very early. We have also invested in technology for EVs, and we have supported the local startups very early on and through their journey to become in the leading position where they are today. The biggest tech center we have is in Shanghai that Federico will tell us more about here later today.
Thank you. Another figure you had out there was that over the last 12 months, some 60% of the order intake was related to electric vehicles. Without knowing exactly where the market is, that seems like a relatively high figure. As that transition into manufacturing and actual production of products, is there a risk that you get capacity constraints on the EV side and that we get stranded assets or similar on the ICE side of things?
You know, our assets can be used to produce bearings for both ICE and EV vehicles. Production of EV bearings may require some additional process steps and enhancement and control functions, but the core assets are basically the same. Therefore, we can manage that transition in a dynamic way by reassigning, adapting, and reusing the assets that we have. Therefore, we don't see a big risk of stranded assets.
And you've highlighted the positive aspects of electrification and electric vehicles getting a higher share of the total growth. We learned from Kerstin's presentation previously that while the number of bearings in an EV vehicle might be lower, the value is greater. Could we translate this into a figure on how much the potential value per vehicle for SKF Vertevo goes up in an electric vehicle?
I mean, you're right. The number of positions are fewer, but the value content is higher. It's difficult to quantify because it depends on the application configurations and the program-specific requirements. But if you look at the most advanced e-drive solutions with the most advanced requirements on current mitigation in 800 V systems and higher specifically, the value difference is significant.
Very good. Thank you so much, Fredrik.
Thank you.
Okay. We will now turn to the Vehicle Aftermarket, and to guide us through that, please welcome Olaf Henning, Senior Vice President, Vehicle Aftermarket.
Thank you, Erik.
Thank you, Erik. A warm welcome also from my side. My name is Olaf Henning, and I am honored and excited being here today at our Capital Market Days. It reminds me, when I joined SKF in 2024, what really attracted me was the opportunity to take a global aftermarket business, bring it under one leadership team, giving it one direction, and form a team which is able to capture the opportunities being ahead. If we see this from a perspective where I come from, I have over 30 years of aftermarket experience, working always for tier 1 companies like Bosch, Michelin, or MAHLE for the 30 years, gives me, of course, the confidence, and I know what it takes to succeed in this market.
With our growth and efficiency agenda, which we have built during the last two years, gives me confidence, also with the team, that we can continue to succeed. We have seen from Fredrik how we support our OE customers and make them more successful. Now let us have a look into the aftermarket when the vehicles get a number plate and enter the workshops they serve them. This is a typical picture, what you see here. This is the world of aftermarket. These are the workshops which keeps our vehicles, which we are also driving day by day, running. The real hero here is the gentleman in the front taking the parcels with the equipment and with the spare parts he needs to repair to keep this running.
You see here different repair cases, like the passenger car in the front, who has already some years running, and the vehicle owner, like us, wants to have a dependable repair they can trust, and also to an acceptable price. The van and the truck in the back is more a working asset for a small craftsman, a delivery service, or a long-haul fleet. They do not want to be in the workshop. They want to be on the street, because then they can only earn money. You see already availability and parts being at the workshop at the right time, in the right quantity, and at the right price is basically defining our business model. You see also an EV being on the lift on the right side, with a dismantled drivetrain.
These are opening new repair opportunities for the workshop because the vehicles are entering more and more our fleets, and therefore entering more and more the workshops. These different repair opportunities is basically the basis for our growth agenda I want to navigate you through now. It all started with four levers, which we have also defined in Vehicle Aftermarket. It starts with a trusted brand in a very attractive and resilient market. Then our already existing reach, global reach to 9,000 and a bit more customers, with a relevant product range which has built over decades. Last but not least, we want to be the preferred brand of the technician. We want to support them doing their job in a proper way, and therefore we want to create a pull effect on the workshops, basically to ask for our products.
Let us start with a trusted brand in an attractive market. Trust is also in aftermarket extremely important, because not only the distributor who is selling the parts wants to be sure that the parts fits the vehicle, that there are no problems, and that basically there are no warranty claims. But also the technician who puts his reputation behind the repair wants to trust the brand. Here, of course, we build on the 120 years of brand exposure of SKF. The survey cited here shows that among automotive bearing buyers, there was a total brand awareness of 90% for SKF. This is, of course, an extreme valuable position which we can build on.
And also, Kerstin mentioned it already in her presentation, we have already demonstrated a considerable growth in the last five years of 5.4% annual growth, and this is, of course, something we want to continue going forward. The market, if we look forward, shows additional growth of roughly 1.5%, which is moderate, yes, but not only the 1.5% of more vehicles in the market are defining the market volume and value, it's also the average age. You see here, the European car park is continuously aging from today, 11.5 years- 12.4 years until 2030. Older cars means also more repairs, more maintenance, and this is what we want to capture with our lifecycle strategy I am going to explain you in a couple of minutes. The last, I would say, contributor to an attractive market is the entering EV market.
Yes, they have less mechanical parts, but they are heavier, basically because of the battery. They have more wear, especially in steering suspension, and there we have started a couple of years a quite good initiative to grow in this field already. Also this, I will give you a little bit more insight a bit later. I would say the market and the brand is something really attractive going forward in the automotive aftermarket. Let's have a look at the next lever, our customer base. This is already something what's also giving us resilience. You hear a lot that aftermarket is a resilient market. It's first because you have so many vehicles on this planet. I think the latest figure is something about 1.6 billion vehicles on the road.
With our 9,000 customers, we are serving basically all of the five continents today, including our warehouse footprint, which is divided in regional bigger hubs and smaller local warehouses. We serve the major channels of the aftermarket, which are distributors and retailers, pure online distributors, but also the after-sales organization of the OEMs, what Fredrik just explained, and fleet operators. How do we win? You remember the first picture. It's about availability and delivery performance. So we need to be close to the demand, close to our customers. As we have already a built-up network, we can use this going forward to sell more of our products because we have not yet a full distributed portfolio like we have in Europe, for example.
Second, this is the last point on this slide, it's from a core range we have to really a relevant portfolio, because the more relevance we are having for a workshop, the more interesting we are, and the more we become the preferred brand of our workshops. But what is the portfolio behind all this? You see here, our core is, of course, bearing products. This is where we come from, and you see this in different product lines like powertrain, wheel end, and driveline. But to create more relevance to the workshop, we added steering and suspension and braking components. With this, we have really a broad portfolio which serves a major part of the needs of a technician.
With this knowledge, of course, the route to market, we can ensure that if a customer is buying today wheel-end products, with the right knowledge to serve him also to attract him also for steering, suspension, and brakes. Just to give you an additional information, when you saw our growth rates over the last five years of 5.4% for the entire program, then we have grown in the same period with adjacent product lines by 12.4%, more than double than we have grown with the entire portfolio. It is not just something we are adding to the program. Customers are asking for it because they trust the brand, this is what makes us then more attractive and more resilient.
To bring a growth opportunity regionally a bit more into the scope, I would like to show you here an example from India and Europe. In India, we have an existing business since 100 years for bearings and wheel ends, a smaller program depth. But we have the experience from Europe, where we have a very broad portfolio already, now we can take this category knowledge and bring it to India. Of course, we need to adapt the portfolio to the local car park. We need to adapt the portfolio to the local price points and the requirements from the workshops. There are still some work to do for the regional teams, but this is the enabler of bringing the programs now, like in Europe, to more regions and to sell more to an existing network.
I talked a lot about the teams and what is behind this. You heard me saying in the beginning to form a global organization. Well, until 2025, the aftermarket business was organized a bit in business lines, in corporate functions, but also in local country organizations, this was brought together to have really one global strategy and mission, this is what we are executing now since a good two years. Second is, this is important, now we have the local execution really to follow the strategy and to grow the programs in all markets and not only in those which are more mature. We rounded this up by bringing global capabilities like product lifecycle management, demand and supply chain, of course, the customer service to enable that the customers are being served as they require and we can become benchmark.
The last lever of our growth strategy is, of course, the upcoming opportunities in the EV market. Here we see a competence and a knowledge gap on the workshop level. As these are new drivelines, from a combustion engine towards an electrified engines, mechanics do not know, not all of them, but some of them do not know how to repair those. Therefore, we said we want to become more from a parts supplier, being a solution provider. You see the tripod on the right side, one element is to provide the right spare parts or repair kits to make a proper repair in time and the first time right. The second one, even more important, is how to do it.
The technical repair knowledge we need to provide to our final customers, which are the workshops, and of course, special tools. This is the third element, to provide special tools where needed to make a proper repair, also according to the specification. As we see already in Europe, 2.2 million electric vehicles out of warranty is something which is now starting to generate demand. Over the years, we have seen the prognosis from Fredrik, how fast EVs will grow, and new demand, and reposition us with our portfolio, which is, by the way, also the aftermarket, quite drivetrain agnostic. We sell products which are independent, if it is a combustion, hybrid, or EV. The transformation, our program will follow quite seamlessly. After I have seen now our growth ambitions, the next question is, how do we make our sales more profitable?
There are three levers, pricing, lifecycle sourcing, and our operations. I would like to start first with our pricing, where you can see the breadth of the portfolio creates quite some complexity for the team. Just imagine a pricing manager sitting in front of his computer, having to handle with 50,000 SKUs and 9,000 customers. There are different contracts behind, different applications, different markets. I would say quite a level of complexity, and you cannot deal this with one-fits-all pricing solution, so you need really a quite sophisticated pricing management, and one is manage the lifecycle. As the vehicles are getting older and older, remember, just in Europe in the next years, we see here an increase by almost one year, we need to adapt the price point over the lifecycle.
It is a kind of dynamic pricing, but not on the spot like we see from the airline industries. Here we do it over the lifecycle, because the willingness to pay from the customer is going down the older the car gets, because the residual value of the car goes down, and we need to be able to adapt this price point in coordination and in combination, I will show this on the next slide, with the sourcing cost. Second is segment by value. As we compete in different channels and in different product segments and in different markets, we need to be able to understand what is the competitive situation in each of the channels and each of the market to adapt our pricing also in those markets, in the end, to earn the money or the margins we are targeting.
Lastly, this is all embedded in a process of governance and standardization, because if we want to bring the decision close to the customers and do not want to support a decentralized organization, it is important that our teams know in which framework they are operating. Now let us bring the lifecycle sourcing a bit closer what this means, and you see on the right side an example, an existing example of a wheel bearing kit for a car 0-6, 7-13, and 14 years and older. You see that the recommended retail price is going down from SEK 700- SEK 520, basically to reflect the lifecycle value of a car. If we want to continue our presence as a premium brand in the older vehicles, we need to adapt our offers accordingly. This we do with three levers.
First is, we have a global category-based supplier network, which is able to adapt to the specification we give, the offer we need in order to keep our cost and margin balance intact. Second is, a good supplier or a good delivery is nothing worse if we see, like in the last five, six years, if there are supply disruptions. In order to keep the supply to our customers stable, we have, at least for the fast movers, established dual sourcing as a risk mitigation in order to ensure a higher delivery performance than others. And third one is, we have an own SKF production base. Combining this with our outsourced network, we are able to serve more than one product category, and especially the fast-growing ones, we can support there much better.
This brings me to our last lever for efficiency, and this is where basically delivery performance or our promise to our customer hits capital discipline. Because the more we sell, the more regions we expand, we have to invest more capital into inventory, and this is basically always a trade-off to say, "What do I put on my inventories, and what can I sell?" And here we need customer data, logistic data, product data to have always the best balance that we have those products on stock which are also sold to customers, and therefore we can balance a good inventory and availability management. Second lever is to improve the warehouse utilization and picking productivity.
You see on the right side also an existing case study from Crossville, our U.S. warehouse, where we introduced in 2025 a goods-to-man warehouse management system where we could reduce the order time from 48- 24 hours. So we could take one day of inventory out of our stock, so this was driving capital efficiency. And second, customers are getting their goods much faster than before. And second KPI is warehouse damages could be reduced by 98%. So basically, they are not existing anymore. And the last lever, the third one, is how we manage our CapEx invest in aftermarket in larger locations, and where also the size of the operation justified, we invest by ourself.
But if it comes to smaller locations where we use service provider, we can rent a warehouse, we can rent their warehouse technology in order to be very CapEx effective and do not invest too much. So bringing this together means pricing, sourcing, and warehouse operations are driving profitability, while sensitive CapEx investment altogether is supporting a better return on capital employed. And Niclas Sjöswärd will move into his presentation a bit closer to that to explain you how this fits together. Lastly, I would like to summarize and give you a message. We have a strong foundation of 120 years of SKF and, of course, our long OE heritage, which gives us a penetration in the vehicles on the market. We have a broad portfolio, which has additional potential to grow regionally, and of course, with a customer network with 9,000 and more customers.
The second point is driving this growth forward gives us this possibility for geographical expansion and the customer proximity to drive the share of wallet up. Lastly, it is margin and cash that with our efficiency in pricing, sourcing, and warehouse operation, we can drive the margin up and therefore the return on capital employed. With this, I would like to thank you and hand over back to Erik.
With 2.2 million vehicles, I think you said, leaving their electric vehicles in Europe, leaving the warranty window, it is interesting to learn about the emerging EV repair opportunity. Thank you for a great presentation, Olaf.
Yeah.
You highlighted a bit more than 5% growth over the past couple of years.
Yeah.
A good progression.
Yeah.
Out of the, call it structural drivers that you highlighted, we have a growing vehicle park, a park that is getting older. SKF Vertevo has expanded into adjacent industries. What are the main contributor to that growth over the past few years?
You mean of the past years?
Yes.
The past years, it was definitely the adjacent products which we added to our program because this was really something customers were, based on our heritage, appreciating that we are giving them trustful products, because this is the name we are standing for, but also the regional expansion. It is hard to say this was the only lever. I think it was a combination of what we have seen also here. Otherwise, we wouldn't define it like this. And it is a good combination of all of them now.
You also talked about the importance of having formed a global vehicle aftermarket business.
Why is that so important? What is the difference?
Well, we have more and more also global customers, and we have so-called ITGs, international trading groups. They have a global reach today. They have really, their members are working on a global base, and they expect from us that in the Philippines or in Australia, we are basically offering the same program than what we do in Europe or in the North Americas. It is coming from the customer expansion on a global base that we also see this much better if we have a harmonized strategy across the world. We see this already now since we are executing, it really works.
You also highlighted adjacent categories which had been a growth driver. How far can the SKF Vertevo brand and capabilities extend outside of core vehicle bearings in a credible and profitable way?
Right. This is a great question, and this is a question we ask ourselves every day. We believe where we have the credit also in OE, and we have basically competence in steering suspension, even in brakes, we did this for some manufacturers in the past. In all the areas where we have an OE pedigree, this is where we expand into the aftermarket.
Mm. In terms of improving profitability, you mentioned pricing as a potential lever, and given the size of the distribution network and the number of SKUs in the business, that comes across as a quite important lever to pull.
Yeah.
Is that the bigger one of the different variables you see in terms of contributing to higher profitability?
I mean, it's no secret. If you look into a P&L tree, pricing, purchasing, and operations are the three big levers we have in a P&L. We will see which of them contributes the most. But for all of them, there are dedicated targets to improve our profitability.
Very good. Thank you so much, Olaf.
Welcome.
Please have a seat. We have now heard about SKF and Vertevo's overall strategy. We have heard from the two main business lines. That means it is time for our first Q&A session. For those of you in the room, please raise your hand, and we will make sure that a microphone is brought to you. As a reminder, if you are tuning in through the webcast, there is an ask a question functionality that you can use, and we will try to pick those questions up. Please, at least to begin with, limit yourself to two questions. We can come back to you if there is more time available. With that, I would like to welcome Kerstin back up on stage, as well as Olaf and Fredrik. Very good. I think I saw Hampus' hand first.
Thank you very much. Hampus Engellau, Handelsbanken. Two questions then. Maybe starting off on BEV and hybrids. If I read in what is happening in the auto industry, there is a bit of a revival on hybrids, especially on the Western ones. We are talking about long-range hybrids. Could you maybe talk about the different exposure you have within Vertevo in terms of electric drivelines in hybrids versus BEV? I will do that as a second question.
I start. We love hybrids, and we love hybrids because they have both. They have the conventional drivetrain, and then they have an electric drivetrain. I think, Fredrik, you know the technique so well, so why do not you fill in a little bit here more after this headline?
No, but I think that summarizes it well, right? It is a duplication of powertrain that is good for us. Also, a lot of our portfolio is powertrain agnostic, especially on the wheel end side. Here, it really does not matter if it is fitted on an ICE vehicle, hybrid, or an electric vehicle.
And if I may add, in aftermarket, we love hybrids as well.
The second question I want is on ceramic bearings, battery electric vehicles. There has been a range war in battery electric vehicles, and at some point, I think we are approaching the point where that is not an issue any longer. If you would compare that to your pricing on ceramic bearings, are we coming into more price competition? The OEMs are being more aware of what they are paying rather than just chasing range. Thank you.
Fredrik?
Yeah. I mean, you are right. I mean, we operate in a competitive landscape, right? We are continuing to invest in new innovation to support those technologies as also the different electrification technology evolves, right? So we see opportunities of higher complexity on the vehicle systems going forward, and that really plays to our strengths.
Maybe just one thing to add to it as well is the voltage is increasing in the vehicles, and we know the voltage is increasing because we want to charge vehicles faster, and then you need to go to 800 V or 1,200 V. Then, of course, the most sophisticated materials are needed in order to manage this current within the vehicle.
Jakob.
Perfect. Thank you. Jakob Marken from SEB. My first question is on the margin target. If we say that the market for EVs would grow a bit slower than you expect or a bit faster, how much would that affect the margin target? I.e., how much of the target on the margin side is dependent on the market outlook?
All three elements of our bridge, exiting contract manufacturing, growth, and efficiency are important to reach the margin target. It is not one of them or one is absolutely key and the other one is not. We do need to see this combination in order to reach our targets. But we have two areas which we have in our hands. It is, of course, the contract manufacturing and exiting contract manufacturing we have in our hands, and we also have in our hands to drive efficiencies to become this pure automotive tier one player with much more efficient flows. Those we are, of course, focusing on. Then there is growth, which we are expecting, and also rather recently, we see an increased growth of electric vehicles.
I was surprised to see it from India only last week, because the currently high oil price is doing also something with the customer sentiment. We do see positive impulses in the electric vehicle market and the growth projections we have seen here and we have presented are the ones which are available in the market, and we believe in those. We see, again, all three elements of the bridge to take us to the target.
Okay, thank you. The second one, how do you see the competitive landscape changing when EVs take a bigger part of the market? What have you already seen, and what do you expect it to be in the coming couple of years?
Of course, we are in a market with competition. We look into competition in different kind of tiers. There are some global players, and we are not so many in the market, but they are fully global innovation leaders. Then there is also an area of regional players, maybe more like Chinese bearings player, and then there are some which have very selected bearings positions, but they wouldn't be able, for example, to serve a full platform. This is roughly the market we are playing in, and there is, of course, competition in all fields. But if you see our positioning in China with supplying all of them, now we have 13 Chinese suppliers, but globally, it's the 20 top EV players we are supplying to. Also being the technical lead supplier with BYD for bearings for their sophisticated cars, we feel well-positioned in this market.
Okay, thank you.
Agnieszka.
Thank you. Agnieszka Vilela from Nordea. I think you mentioned the geographic flexibility that you have that gives you advantage when you sell to your customers. But does it also mean that you will need to have kind of overcapacity in your production structure? Then maybe in combination with that, a question to Fredrik specifically. You said that you will be moving some assets from Europe to Asia. If you could elaborate on that.
I can start. A geo-flexible setup is something our customers extremely glad about. Where it starts is when we have RFQs, then the customer could say, "Oh, please give me 50% from Asia, where you have a lower landed cost coming into Europe, and 50% from Europe." We never know what happens. These are the dialogues we are having. This is something we can supply. We can play the same, of course, with the U.S. or Brazil or Mexico or other parts of the world. This is often also a strong argument in order to win a certain business with a customer. This is not leading to excess capacities, but this is for us a way to show flexibilities.
Then in these very extreme cases, Fredrik, your two examples, both on the COVID and Russian invasion, were showing simply in very extreme cases, we can, within weeks, shift and say, "Okay, you get now support from Brazil instead." This is the advantage here. You want to elaborate on shifting assets?
Yeah, I can add to that having this geo-flex production setup, I would actually say it is a heritage from SKF, because it is also one of the strengths of SKF, where we are coming from. Now we are tuning that towards the automotive needs that we see, and the automotive markets, and the different regional demands. So that is where we are sort of boosting that asset transfer in that overall setup that we have since before.
Thanks. Then also follow up to Olaf about the pricing strategy. I just wanted to understand it better, like what really are you doing with pricing? Because it sounded like you are trying to have the adaptive pricing, maybe address the value customers a bit more. Is that correct thinking? Then also, I think in your prospectus, you wrote about pricing conditions in Europe being a bit more difficult right now with competition taking some programs. If you could talk about that as well.
Yeah.
You take one, I take two.
Yeah. One is, I think, Agnieszka, what you said is the life cycle pricing. This is more adaption of our price points to the willingness to pay of the end user for the repair, depending on the vehicle's age. This is one element. The other one is, of course, how do we position ourselves towards competition? Because the aftermarket is not only for us attractive, it is for everyone attractive. So it is super competitive, but having 120 years of experience gives us, of course, and otherwise we would not have seen these growth rates, and this confidence also from the customer. But we need to position ourselves always towards competition. So market price-driven pricing is essential for us. It is not a cost plus, it is always market price minus, yeah.
Agnieszka, coming to your interesting question around Europe and pricing in Europe, and I answered more from the OE perspective. Yes, there is a lot of competition in Europe, and we also see that OEMs are producing less vehicles in Europe compared to previously. Looking into the recent nominations, and we are in contact with customers all the time, there are a lot of open RFQs running right now. We do see a good hit rate in our nominations and a good nomination pipeline, and this is resting us assure that we are on the right track in regards to hitting the right price point in the market to make us attractive. Is it a challenge? Yes, of course, but we are up for it, and we have a lot of programs in place in order to improve.
I think Fredrik also talked about those efficiency levers that we are working very actively on.
There was a question over here. Yes.
Thank you very much. Kiel Kiernan, Morgan Stanley. Could you please tell us a bit more about the contract manufacturing, the history behind it, how it phases out over time, and then a quantification of the impact on group adjusted EBIT?
Just to make sure I understood your question. How contract manufacturing is going to phase out and the impact on operating margin, right?
Correct.
Yes. If I start with the second one and then talk a bit more about the phase-out. It is one of the three areas in order to reach our margin targets, to phase out contract manufacturing. This is an important part in our margin bridge. Again, what it is, it is a bidirectional contract with the SKF Group. We are supplying parts in a smaller extent, and we are receiving parts to a larger extent. We had the numbers on the slide, SEK 3.4 billion run rate by the end of this year, as we speak right now. How we are phasing out, there are different levers to it. One thing will be of moving assets which are currently located in an industrial plant into an automotive plant.
We are not building a new plant or doing something else, but we are simply adding production channels which are movable into our plants. Here we have a concrete setup for the beginning of the first half of next year. We will be executing on this asset transfer, and this will be bringing down contract manufacturing already next year to a good extent. Then there is more. We are building up technology, so new programs with new product types we will be having in-house. Then we can also go to external parties if there are any ingoing components which we would want to purchase. Why haven't we done all this already now? This is very much connected to customer approvals.
It takes time, and we do not want to come to customers too often or want to make sure that we are agreeing that this is not disturbing any supplies, because serving customers and serving them on time with the right products is always paramount for us.
Thank you very much. What about the quantification?
I am sorry, what about the quantification?
Yes.
It is one of the three elements. I will not be able to break it down more for you.
Thank you. On the organic growth, as part of the bigger SKF Group, it has been negative for a few quarters in the past few years. How much of that is you exiting these unprofitable business lines, and how do you see this evolving moving forward? Also, if the aftermarket growth has grown, I think it was 5% over the past few years, does it mean that the OE business is seeing some headwinds?
I can only comment on SKF Aktiebolag. The question is around organic growth, and it has been more of a flattish during the last years. We have been doing portfolio pruning, and a major share of the decline has been due to pruning. However, this pruning has also helped us to increase the quality of our portfolio, specifically in EMEA. The other part was around, as you said, VA growth. Yes, we have been growing in VA, and that is a margin-accretive business, and we are very glad about this good growth in VA.
Thank you.
We have a few questions also from the webcast. I will start with the question of what does your customer say about the split and listing of the company?
I start, and then you will be customers a lot, but I start overall very positive. This is nothing new. We have seen quite a few automotive tier one players doing similar splits. Our customers very much like to see that we are focused on automotive, focused on their core business, that there is full management attention on their respective business. It is only positive basically, and that is also why we are a bit careful now. We are not shifting too much too quickly so that our customers are continuously getting the quality and the deliveries as they expect from us. If you would like to add something from your side?
Nothing to add from the aftermarket. Exactly the same reaction. It is the better focus, more serving, and to be more in this automotive aftermarket field.
Yeah.
I can-
Yeah, and to add to that, I think the focus, yes, absolutely, but more specifically, the potential to drive speed. I think they are now meeting us as a more focused, more diligent, and more, I wouldn't say agile, but a supplier which is able to focus more on our core, let us say. This is something that Federico here will also share more details around later on.
Thank you. There is a second question around the level of diversification in the business. I think I am focusing on the original equipment part. Is there a number on that, the top 20 customers representing a certain percentage of sales or similar you can give us?
Top 10, 45%. Top 10 customers, 45% in the OE business.
Good. Thank you. The third question relates to the topic of consolidation of the manufacturing footprint in Europe. The question is if you can elaborate somewhat further on those opportunities, and potential cash outflows in relation to that, and what the profitability impact could be as well.
We have seen during the last years that the vehicle production in Europe has been declining from around 21 million cars down to 16.7, I think was the latest number, on a rolling basis. This has then also implications. We have been consolidating, reducing manpower in Europe, and also shifting assets to Asia. These are all levers for us to stay competitive and to stay in the flow. I would like to park the questions around cash out to the later Q&A, if it's not already answered by Niclas in his finance section. If we could hold this, and the colleague online may re-ask if we haven't properly answered all of the aspects.
We certainly can. Checking to see if there are any additional questions from the room. Very good. Then we will now take a break. Thank you so much for your questions, and thank you, Kerstin, Olaf, and Fredrik. For those of you joining us online, the webcast will continue at that same time. Please, if you're here today, try to be in your seat in good time. Thank you.
[Break]
Okay, we are back. I hope you've had a good break and that you maybe have enjoyed some stimulating discussions. We will now turn to research and development and the role of innovation in strengthening SKF Vertevo's competitive position and speed to market. To tell us more about that, we will welcome Federico Galetto, Chief Technology Officer and Senior Vice President Research and Development. But first, we have another video that we would like to show you.
The world is changing, fast. Across the automotive industry, expectations keep shifting with it. As those expectations grow, we keep coming back to the same question: How far can we go? It's a question that drives our engineering curiosity and one we explore every day together with our customers. It could mean shaving off fractions of a second on the racetrack, reducing energy losses in an electric vehicle, or keeping a truck on the road longer between service stops. Today, technology allows us to explore more possibilities, learn faster, and make better decisions earlier, turning ideas into solutions, and solutions into reality. For us, there's always another question to explore, another idea, another opportunity to push things further. With each one, we keep finding out just how far we can go.
Good afternoon. I'm Federico Galetto, Chief Technology Officer and responsible of research and development at SKF Vertevo. I joined SKF back in 2010, and I spent the majority of my career in automotive technology working on roles that covers both business and engineering sides. Somewhere along this way, I became a real bearing enthusiast. Bearing, in fact, may look like small components, often hidden inside the vehicle, but to master them requires an incredible combination of engineering disciplines like tribology, lubrication, simulation, and fine manufacturing. That is what makes this technology so fascinating to me. In the video, you have seen how all those capabilities come together, from understanding the customer challenge, proposing a solution, validating, prototyping, testing, validating again, and then in mass productions. Today, this complete chain need to move faster than ever.
Before the break, Fredrik showed us how we scale volumes with OE customers, and Olaf showed how we capture value into the aftermarket life cycle. In the next 20 minutes, I want to show you how, with our technology, we create customer value and capture growth both in original equipment and aftermarket, thanks to our innovation, new product launch, and engineering excellence. The message I want to leave you today is this one. First, we have a strong engineering heritage, and innovation is part of our culture. Second, we engage early with our customer because our technology portfolio is very much aligned to where automotive industry is going. Third, as a standalone company, we have the opportunity to turn that strength in customer value and growth faster.
Those three elements reinforce each other, because our technology gives us relevance with our customers, engages with them earlier, permits us to see what comes next, and speed translates this knowledge into growth. Let me start with the first point, our innovation culture. Innovation in automotive is not something we have recently decided to do. It is part of our history. SKF was founded in 1907 in Gothenburg. We started our technical partnership with Ferrari in 1947. It will turn 80 years old next year, and it is the longest uninterrupted partnership in F1 history. We have pioneered hub wheel-end solution before in passenger vehicle and then in commercial vehicle. More recently, when electrification started to change vehicle architectures, we launched new products for electric drivelines and low-friction solutions.
What is important for me on this page is not the single dots, it is the continuity, because the automotive market has already gone through several transformations, and every new platform change introduces new engineering challenges. Our role has been to be there, capture those challenges, and transform them into solutions for our customers. The ability to evolve with the vehicle is one of the foundations of our competitive position. Of course, innovation cannot only stand on past achievements. It has to be renewed year after year, and we are continuing to add dots to that line. This year, we received the Technical Innovation Award from Scuderia Ferrari HP for a new product and a new material we developed for a Formula 1 application.
This case is interesting because it really shows what innovation means for us, because it is not innovating in isolation, but is to sit close to our customer, deeply understand their very technical demanding applications, and also having enough trust on both sides to try something unconventional. In general, motorsport and racing is for us a field that tests things to the extremes, and we have been developing high-performing products in Formula 1 since its very beginning. Of course, volumes are quite different from the mass market OE volumes, but the learnings are valuable because what we learn at these extremes can then help us to convert this knowledge into technology for the broader platforms. Innovation is, of course, not only about high-performing vehicles. This year, we also received an innovation technical award at Automechanika fair.
Our wheel-end products showed up to 63% lower friction and up to 3% lower fuel consumption than selected aftermarket solutions. In this case, innovation has a clear economic meaning, because for our fleet operators, less fuel consumption means less cost. But also, less energy consumption means lower emissions. There is also another important point. This is one of the cases where we show how, through the technology that we have developed into the demanding OE application, we are able to scale it to the aftermarket to capture value over the full life cycle of the product. Behind those examples, there is a quite established engineering capabilities. We have 10 technical centers in nine countries. We have around 450 people in between research and development and application engineering, including customer-facing engineering sitting in sales.
We have more than 4,300 patents in our technology portfolio, and we expect to account for 2.5% of the net sales next year, which is a number in line with the past. If you, on top of the 1% reported for automotive, you add the relative technology allocation from SKF Group. More important than the numbers is the model behind those numbers, because we want to combine two things. We want our product engineering and application engineering to sit close to the customers where things are developed. One example is our tech center in China, is our biggest tech center with around 100 engineers, where every day our people sit to develop the next generation platform with Chinese OE customers. At the same time, we want to concentrate critical capabilities in center of excellence for specific knowledge like material science, tribology, lubrication, and testing.
This permits us to combine two things: capillary capture customer needs and differences across the regions, and when we see a technology pattern emerging, converging into a more broader solution. We also deliberately deploy those engineering capabilities where technical demands are the highest. For example, in SUV or mid-large size vehicle, the challenge is normally about system performance, because you need to find the right balance in between weight, cost, packaging, durability. In commercial vehicle instead, and especially in heavy-duty vehicles, it is also about reliability, uptime, service intervals, and total cost of ownership. In racing and motorsport, as we said, all those aspects are brought to the extreme. But why this is important? Well, this is important because it forces us in this segment to improve our technology every day. Then electrifications come on top.
More weight, higher speed, higher voltages, less friction available to be wasted in term of energy. So, electrification does not make bearing technology less relevant. In the majority of the applications, it makes bearing technology more demanding, and therefore increase the need of engineering capabilities. This is something good for us. This brings me to probably the most important technology slide of my presentation, because it is where we see opportunities in front of us. As we said, a vehicle being electrified might have less mechanical components, but the mechanical components that remains get tougher requirements. In bearing, it was exactly like that. If we look back in the first EV generation, the emerging technical needs from electric vehicle was to mitigate electric current into the drivetrain. In our hybrid, the ceramic bearing was an effective solution to cope with this need. Then platforms started to evolve.
Motors went smaller. We have seen higher rotational speed for more power-dense motor, higher charging volts, 400- 800 architectures, and range becomes increasingly important. This again was generating new engineering challenge and opportunities for products that we develop, like the high-speed ceramic bearings, or the conductive brush, or the low wheel-end friction solution. The next wave is already coming. We are seeing by-wire technology, in-wheel motors, or architecture over 1,000 volts. This again creates new requirement and new potential solutions for our customers. This trend is not stopping with electrification itself, because moreover, the long term, we are seeing increasingly software-defined vehicle and autonomous ones. This again creates new challenge for the bearings as a component and new technical problem to be solved.
As Kerstin mentioned, the number of bearings into an electric vehicle can decrease while the value of the bearing that we engineer can increase. This is a good opportunity for us. Let me now make it very much more concrete with one example. This that you see here on the screen is one example of how we worked with one of our OE customer through succeeding platform generations. Specifically, we're looking to the wheel-end area of the vehicle, where friction is very much important. If you look into the baseline, our wheel bearing were delivering 1.4 newton meter of friction, each one. On the most modern technology we have put in production in 2024, in this case, for example, this was 0.6 for the same application. We see further potential to go down to 0.3.
Now, at vehicle level, this means that this product generate 2% full vehicle efficiency, or in case of an EV vehicle, as referenced here, 11 km of additional range. Why this is relevant? This is relevant because we work on a relatively small component versus the full vehicle. But improving this component can affect the efficiency of the full system. This gives our customer options, because when range was a problem, they could extend the range of the vehicle. But they can also make different technology change at project level, because, for example, with just few euros more on a bearing, they can reduce the battery need in the range of EUR 100 in order to deliver the same range.
This also shows how we see innovations, because we want to innovate where we see the possibility to make impact at vehicle level, impact that our customer can see, and this is what makes our technology relevant. Now, on passenger vehicle, the electrification journey already came quite far, but as Fredrik mentioned, commercial vehicles is starting now. We are seeing a clear trend of commercial vehicle being electrified, and China here playing a leading role into heavy-duty electrification adoptions. From an engineering perspective, this is quite interesting, because range is important, but also payload, service interval, uptime, and again, total cost of ownership. This is an interesting situation for us because we can build on the knowledge that we already generated for the passenger vehicle and address new emerging engineering challenges specific for the commercial vehicle.
We are already working on those technologies, like in the FAW vehicles that you see here on the screen, or with other leading Chinese OE customers like Yutong and CNHTC. For us, the reuse of this technology is really important, because we can leverage on the engineering investment we have already done, but at the same time, enabling us to capture potential growth in this interesting segment faster. This brings me to the third part of the story, speed. Automotive engineering has been traditionally always searching the balance in between two things, performance and cost. Now, we are seeing a third variable into the equation, that is speed, because our customers want to engage with us faster and develop an industrialized solution quicker. So, it is not enough to be technically good. It is not enough to be cost-competitive.
We need to be technically good, cost-competitive, and fast. We see speed directly connected to growth, because if we can engage with our customer early, if we can select solution and industrialize quicker, we can maximize our ability to win business and bring our technology to the market. So, that is why we see speed directly connected to growth, or even as a growth enabler. We already made some good progress. The first example I want to mention is about engineering efficiency. For one of the selected products that we have to generate the full technical documentation to reply to a customer inquiring was requiring approximately one week with additional timing. This year, thanks to design automation, reuse of engineering knowledge, and AI-assisted code generation, we have been able to reduce this time to just few hours. What is important, the decision process remain rules-based.
AI help us to get quicker, but the decision on technical data is still done by our experts. The second example is about industrialization. For selected wheel end programs starting production the second quarter of this year, we have been able to reduce the industrialization lead time in the range of 50%. There was not magic solution behind those case, but it is a combination of several factors, like early cross-functional involvement, standardized way of working. When you have realized that, then you can automatize key workflows into the flow, like, for example, the design that we just mentioned. Those examples are particularly interesting because it shows that digitalization, virtual validation, and AI gives already some concrete results to us, like from one week to just few hours or 50% time reduction. We see, of course, much more potential ahead.
This brings me to the final element, because now operating as a standalone company does not mean that we start from zero, but quite the opposite. We have a strong technology foundation base. We own our patents. We get long-term access to the background SKF IP relevant patent, and we have arrangement in place to continue to collaborate with SKF into early-stage technology. 86% of our engineer transfer from SKF. So, the capability, the customer knowledge, the expertise come with us. Now, we can build on that foundation differently. Our priorities can be 100% automotive focused. We can shorten the decision path. Now we can bring technology development, product development, and industrialization under one complete system.
There is also an interesting aspect of preparing to operate as a standalone company that I find interesting, because during this process, we had to classify, label, and organize a quite important amount of data in between engineering assets, technical specification, and standard. This has been obviously quite a big piece of work. At the same time, I see it as an investment, because clearly labeled data and structured is the perfect foundation now for us continuing scaling digitalization, automatic design, and AI. For me, operating as a standalone company now give us two things: continuity and change. Continuity in the technology, the people, customer knowledge, and the expertise. Change into the focus, into the decisional speed, and to the way that we can bring those capabilities into the market. The combination of these two things is where we see our opportunities ahead.
Let me finish from where I started. We start with a strong technology foundation. We have a strong engineering heritage, and innovation is part of our culture. We have been innovating automotive for more than 100 years. We have an established engineering network, and our products are proven to work into the most demanding application in the world. But we see opportunity ahead because our technology is very much aligned to where automotive market is going. We have seen automotive market is changing, and every change brings new engineering challenge, and this is a good opportunity for us. Also, we see that speed is becoming an increasingly important competitive advantage. Technology is already helping us to get faster, and now, as a standalone company, we have the opportunity to accelerate further. The baseline is strong, but what it is important now is what comes next.
Automotive market is changing fast, and we intend to use our technology to shape that change together with our customer and partner. Thank you. Back to you, Erik.
10 technical centers, more than 4,000 patents, 2.5% of sales to spend every year, and then you get to play with Ferrari in Formula 1 on top. I think you have the best job maybe at SKF, Federico, right? Yeah. I would like to ask you a few questions before we can sit down.
Yep.
During the presentation, you highlighted quite large improvements in wheel-end friction and overall vehicle efficiency. How do you monetize that?
Well, it is difficult to give here a single answer because it clearly depends by customer, by platform, or by application. But what we can say is that we are proving to change the full vehicle efficiency, and this gives our customer options. We see clearly this as a competitive advantage because they try to contact us early in order to be able to influence the full vehicle architecture. To combine the competitive advantage that we have, it is of course not only engineering, but it is also what the other colleagues said. For me, the ultimate proof is the 50% success rate in our strategic business opportunity, which means that we have the right conditions to win.
You also highlighted that as electrification evolves, the demands and requirements in terms of the technical capabilities of the products continue to increase. We are seeing, as you said, progression towards higher voltages, by-wire systems, in-wheel motors, et cetera. Is there a specific technology within electrification that you see has extra potential to serve as a growth driver for SKF Automotive?
Well, I think here we have to distinguish between two groups. We have technology that we have already developed that we are currently scaling into the market, like, for example, conductive brushes, high-speed bearings, and low-friction solution. We are already working to new solution for those upcoming requirements. For example, into the by-wire, we can mention we are working on the ball screw for electromechanical braking, which is an interesting product. We tend to see this as medium-term opportunities because the market is moving quite fast here, and we are engaging with customer already on those type of developments.
And then finally, in terms of speed, you mentioned specific processes that might have taken weeks before and that you have now boiled down to hours. We learn about China speed every day and how efficient that is. Do you feel that you are on par with the best there?
Well, we are showing here how we are accelerating, and I think here the value it is generating a two-sides value. Because our people, by being relieved from repetitive tasks that we can automate, can dedicate more time not only to this specific case, but also to design to value more customer supports overall. So, on speed here, we are feeling we are moving towards what our customer needs, but the success is not speed alone, it is speed with excellence and customer support, and it is a combination of a wider set of assets and engineering capabilities that we are developing since a lot of years. So, definitely this is an interesting journey. We are also monitoring the market and seeing acceleration mainly coming from Asia. But I want to say that for us is not or speed or quality, but it is speed and engineering excellence.
Thank you, Federico.
Thank you.
We have now heard about the opportunities across SKF Automotive's business and the role of innovation in supporting a growth journey. The next presentation will then focus on how we translate those priorities into financials, including some of what we all love, which is higher profitability, improved capital efficiency, and higher capital returns. Please welcome Niclas Sjöswärd, CFO and Senior Vice President Finance and IT. Niclas.
Thank you, Erik, and good afternoon, everyone, also from my side. My name is Niclas Sjöswärd, as you heard, and I am the CFO of SKF Automotive. I joined earlier this year in January, and before that, I served as group CFO for Arjo. Previous to that, I spent 10-plus years each in Volvo Group and Getinge. I am really excited to be here today, and also really excited to be joining this journey, because the way I see it, we are actually writing Swedish industrial history here now by creating SKF Vertevo as a pure play automotive global bearing company, unique in its kind, as I see it.
Since I have been joining, I have been focusing on preparing us for being standalone and for listing from a financial perspective, meaning setting the financial framework, setting the financial organization and structure in place, and also, of course, working with the board and management to establishing our financial targets and our guidance. I have also been focusing on capitalizing our company in a way where we have a strong balance sheet at departure of this journey. Of course, setting a good approach for how we drive profitability, returns, and cash generation going forward. I hope to leave you with a message here today, that we have a clear and tangible path forward for how to deliver on improved margins, higher returns, and stronger cash flow.
As you have heard from my colleagues here today, about our strong SKF legacy, strong market position, solid business and improvement plans, and high focus and capability within innovation, we feel confident that we can reach these targets. Kerstin has already presented the targets for you, but let us do a quick recap here as well. First, growth. Organic growth will be above market over a business cycle, driven by the strong positions in EV, both on passenger and commercial vehicle side, and also continue to leverage our strong vehicle aftermarket business. Second, profit. Adjusted operating profit margin will be above 6% midterm and at or above 8% long term, driven by the exit from contract manufacturing, our profitable growth journey, and implementing our efficiency initiatives. Third, on the returns.
Our adjusted ROCE will come into the interval of 10%-13% midterm and above 15% long term, of course, driven by the significant improvement in profitability, but also reduced working capital and a disciplined CapEx. We will do this with a continued strong balance sheet, where the long-term target is to be below 1.0x in leverage, while we will start our journey at zero leverage, also considering some post-spin stand-up costs. Our dividend policy is to distribute 30%-50% to our shareholders, average net profit over a business cycle. Our first year of payout of dividend will be 2028, based on the 2027 earnings, since that is our first year as an independent company. Let's focus now how we will deliver on these targets.
As you have heard very well described by my colleagues here today, you can see that we have a clear path to the improved margins, and it is summarized in these three buckets in the bridge, with the contract manufacturing exit, the growth journey, and the efficiency improvements. What I would like to say here, that this is based on specific changes in how we run our company, how we operate, how we manufacture, how we source, how we distribute to our customers. These activities are then detailed out and locked into our business plan for the next coming years, and it is cascaded and owned by our business leaders. This means that this is the whole organization that is now engaged to deliver on this, and it is our control to execute on these improvement steps. Let me go through them in detail and summarize.
The first driver, as you have heard, is exiting the contract manufacturing. This is, as we said, a bridging solution to secure supply to our customer during this separation and transition phase. But it is margin dilutive for us compared to own production or alternative sourcing methods. It is a significant amount. We are talking about SEK 3.4 billion as an annualized run rate now end of this year, but we will reduce that significantly midterm. Financially, this matters quite a lot in three ways. We will have lower product cost, we will simplify our logistics flow and take down our logistics cost, and we will own our own value chain, improving our operational flexibility, and by that enable further savings going forward. This is midterm, a meaningful contribution to our margin uplift journey.
Second driver is our profitable growth journey, and here you have heard about the commercial activities from Olaf and Fredrik in OE and VA, and you see them summarized here as well. But let me pinpoint some of the activities I see that have really significant financial benefit for us. In OE, Fredrik talked about the long-term platform positions in CV, and this is a sticky and profitable business for us, so I would like to highlight this. Additionally, you heard about the high hit rate and the high volumes of awarded and nominated new businesses in passenger vehicles, specifically good mix when it comes to EV. This will also drive and support profitable growth going forward. Olaf talked about the global broad customer base with more than 9,000 customer and distributors across the globe for our business.
This is an excellent platform for us now to expand our portfolio and drive further profitable growth out of the VA business. Innovation supports both businesses by advancing our technology positions, but also, as you heard from Federico, increasing speed to market, which is more and more important for our customers. Third driver is efficiency. Here I would like to pinpoint that becoming a standalone automotive company creates new opportunities for us, opportunities that we did not have before. We can now design our full company, our supply chain, our manufacturing footprint, procurement, our organization in a fully automotive-adapted way. In OE, we see several important improvement opportunities. What I would like to highlight here is procurement and footprint optimization. I see clear and significant financial benefits from these two levers.
Procurement normally coming a little bit quicker into the financial benefit side, and footprint optimization logically taking a little bit longer time, but many time with high financial impact. When it comes to VA, Olaf talked about price management, and it is also my previous experience that price and commercial excellence activities are paying off with high financial benefit and also within a reasonable timeline. In general and across our company, we would like to become a lean company. We will use our new standalone situation to establish this lean organization by reducing management layers, more clear accountability out in organization, reduced administration, introduce more technology to drive our productivity through digitalization and AI. I think you have heard here today and realize that this is not a one-off cost reduction program.
What we are doing here is that we are capturing the benefit from becoming a new independent company, 120-year-old startup, with the opportunity now to fully work for one industry, fully automotive adapted, one high-volume value chain which we adapt to and reap the benefit from. But higher profitability is not everything. We realize, of course, that we also need to improve the returns on capital. Our starting point is the adjusted ROCE of 6.1%, and we have a bridge up to our mid and long-term target. It is quite clear, the significantly improved profitability will support this clearly, but we see clear opportunities within working capital as well as we will be disciplined with our CapEx for PPE. The combination is, of course, what will drive the improvement here.
If we start with working capital, we will start off our journey on an elevated level when it comes to working capital. You see it quite clearly here compared to historic values. This elevated level is driven by separation-related activities, such as building bridge and safety stock for driving our asset transfers to be able to reduce contract manufacturing. This is not as we see the new normal level to operate on, not at all. So we see, first of all, that we can normalize our working capital as we phase out this asset transfer bridge inventory and as we phase out contract manufacturing. But we will also drive structural improvements. We will drive it within inventory optimization. We will drive stronger sales and operations planning, and we will simplify our logistics network.
And that is important because we will reduce number of stocking point, by that, reducing the end-to-end inventory levels. Also, we will exit contract manufacturing. In addition to this, we will drive improvements within accounts receivable through optimizing our collection process together with our customer support teams. Through our procurement initiative, we will work with our supplier base to drive improved payment terms and thereby improved accounts payable. I think you can see on the numbers here that this will be a meaningful contribution to the ROSI bridge, but you can also see that this is a clear opportunity to release cash flow over the coming years. Coming to CapEx. Here we would like to guide you on our CapEx level going forward. Also here, we will start with an elevated level, and we guide for SEK 1.5 billion in CapEx for 2027.
This is to secure that we can finalize our asset transfers and build our own production capacity to take down our contract manufacturing levels, but also finalizing some of the stand-up activities such as our European distribution center and that investment. This is, as you can see, not a normalized level either. This is a peak to start up, and we are guiding for 2028 and 2029, a level of SEK 900 million. We consider also this a somewhat elevated level because we have specific investments in our footprint optimization. Going forward, it will be somewhat reduced, and we will be, as we said, very much disciplined in our capital allocation and focus on profitable growth for our investments. I would also like to give an overview and guide you on item affecting comparability.
If you look at the historical values here, you see very high amounts, and that is completely connected to the separation cost from SKF. What we have going forward is our own restructuring activities to drive improved performance. We are guiding here for SEK 500 million per year the next coming three years, connected to capacity consolidation, asset rebalancing in the system, fixed cost reduction, mostly linked to our footprint optimization that we have talked about here today. These activities are directly connected to the profitability improvement journey and the returns improvement journey that we are talking about here today. Please separate between the historical elevated levels, which were connected to separation, and the forward-looking guidance that is connected to our performance improvement. Finally, I would like to turn your attention to our current momentum in our financial performance in our underlying business.
As you can see here, both for quarter three isolated and our year-to-date, first nine months, we are improving the underlying profitability and profit margin, as you can see here. When it comes to isolated Q3, it is 0.6 percentage points increase, and so far this year, 0.5 percentage points improvement. This is in light of lower sales and lower volumes. This is coming from executing on our strategy as a standalone company, and we are seeing improvements in manufacturing costs and in procurement. We see this as that our standalone status is starting to pay off already before listing, but it gives also a comfort as we now approach listing. Of course, now it is time to accelerate this journey as we have talked about today. Let me leave you with a short conclusion.
First of all, we see a clear path to higher margins here from exiting contract manufacturing, driving our profitable growth, implementing our efficiency improvements. We will see stronger returns on capital, of course due to the profitability improvement, but also to improvements in net working capital and a more disciplined CapEx situation. We are entering our listing period with a strong balance sheet and a strong underlying performance in our business. This is why we feel comfortable about setting the targets that we have presented here today to you. With that, I hand over to you, Erik.
Thank you, Niclas. You had the financials come across as equally enticing as Formula 1, which is a feat. We will start as a standalone company here with more or less no debt. In terms of priorities, M&A, buybacks, dividends, organic investments, keeping a strong balance sheet, what do those look like going forward?
No, but I hope we have laid it out quite well here today with our guidance. We will, of course, follow our dividend policy and distribute 30%-50% of net profit to our owners. We will keep a strong balance sheet with good capacity for actions. We have that also as a long-term target with below 1.0x. But we will invest in our business, so you see that we have some CapEx planned going on. When it comes to the M&A question, it is interesting, of course, and we can come back to that. But our focus right now for listing is to secure that we deliver on our organic plans and finalize our stand-up journey.
Thank you. Working capital, as you highlighted, elevated for specific reasons at the moment, well above 30%. We saw some of the historical figures, but in your mind, what is a more normalized working capital level?
Yeah. No, I think that is important to say that what you see right now are elevated due to separation reasons. That is not the new normalized. I would say that the new normalized is closer to the historical levels than to the current levels, for sure.
Thank you. Then you put out some figures on the expected levels for CapEx, items affecting comparability. What happens? I think there might be some concern that you showed that the IACs will drop off after 2029. What makes you confident that that is actually the case? Will not competitive pressures have you continue to drive changes in the business that demands these type of charges?
Yeah. No, we have done a very solid plan, as we have presented here today, for how to reach mid and long-term targets. We guide on these CapEx and IACs connected to reaching those targets. I see it that post 2029, we will be well-invested and well-structured.
Thank you so much, Niclas.
Thank you.
We have now covered the strategy of SKF Vertevo, the business opportunities, the innovation capabilities, and now most recently, the financial ambitions. To bring all of that together, I would like to welcome Kerstin Enochsson, President and CEO, back up on stage again.
Thank you. During the last hours, we have talked about our strategy and our plans, but one thing we have not talked about too much is about maybe the most important part of it, and that is the mindset of our people and our performance culture. I would like to say a few words on how we as leaders steer the company, because we see that it is, in the end, our people who need to understand where we are going and need to execute on the journey. The journey itself is clear and clearly outlined to the organization. We have detailed plans in place. We have a very customer-centric organization where people are sitting where the customers are and doing their job, trying to solve issues with customers. We have very clear accountabilities.
We have taken out layers in our organizational level in order to be faster, but also to be very clear that we want to ensure that people who are out at the customer side are able to take the decisions within the levers we are giving our people, and that brings a lot of entrepreneurial spirit. We have a strong company structure, and we are positioned to manage uncertainties. We have talked about geo-flexibility. We also talked about different R&D sites and manufacturing sites, and we are incentivizing our leaders for the areas that you are also interested in, and that is growth, efficiency, and also capital efficiency.
We are backed up by an experienced quality board and very active owners, and this is, for me, key in order for us as a management team to drive this company forward and to deliver on the targets that we have laid out.
Summing everything up with our last slide for today, we see SKF Vertevo being unique in the sense that we are a global player that is fully focused on automotive bearings. We come with deep customer insights, collaborations, an innovation mindset, and excellent engineering knowledge. Already today, when we are standing here, we have a strong position in the EV segment, in passenger vehicles. We see rising opportunities also in the commercial vehicles area, and we have full 37% of our revenue coming from the resilient aftermarket. Now we are doing these structural changes by becoming standalone, and that is opening up new opportunities, and it is around growth, growing again, efficiency, lifting ourselves up to the new levels, and reacting fast and agile. Federico explained it so nicely. We have cleaned up the shop. We have cleaned up our house.
We have brought in a lot of data, and we are utilizing now this data of becoming faster and more agile, and that is how we see we can continue to win customer trust and business going forward. These were my final words, and now I am handing back to Erik for another session of Q&As.
Yes. Thank you, Kerstin. As Kerstin mentioned, there is now time for our second Q&A session. A reminder, raise your hand if you are in the room, and a microphone will be brought to you. Please introduce yourself and the name of your organization. There is also a functionality on the webcast where you can ask a question, and we will try and pick some of those up here on stage. You have already positioned yourself, so I do not have to welcome you back. Excellent. We love proactivity.
We learn it.
Very good. Let's start with Nicklas.
Thank you very much. Nicklas Koller, Kepler Cheuvreux. My question is regarding the margin bridge, and I'm wondering which elements of the bridge are more front-loaded and required to reach the 6%, and then also which part of the bridge are more back-end loaded and required for the 8%.
First of all three elements of the bridge are important to reach our targets. Within each part, within each of the three elements that are bringing us upwards, there are elements which are more front-loaded or back-loaded. It is a mixed bag, and I would see for the next years that all those three elements will be with us. But again, we had some indication here, for example, procurement improvements can come earlier in, while footprint optimization takes a bit longer time.
Got it. Thanks.
Agnieszka, over here.
Thank you. Agnieszka from Nordea. Two questions from me. You mentioned that the exits and some portfolio pruning affected your growth in recent quarters and years. Are you done with that actions now, or should we still expect some negative impact in the coming future?
The main work around pruning and optimizing our portfolio is done, but for me, it is a normal way of doing business that you constantly look into the quality of your portfolio, but the large part is done.
Perfect. Thank you. A question on the kind of mix in your business. I mean, I think we understand the growth profile for your different businesses, but what I'd like to hear a bit more about, if you can share it's more about the profitability. If you can comment on the profitability profile for your Vehicle Aftermarket compared to the OE business, and also for your EV products compared to the ICE.
The vehicle aftermarket is margin accretive, and also in electrification, we see this is a margin accretive area, and the reason is simply that we have a higher sophistication of our bearings in electrification or in those, say, more advanced bearings, and this is an area also where then the pricing power is higher.
Jakob.
Thank you. Jakob from SEB again. We talk a lot about EV cars today, but how do you see autonomous cars changing the market, and does that change anything within your niche?
We like the question. We do not talk so much autonomous. You take that?
Yes, I can take it. Yes, you are right. We have seen EVs pushing requirements, and in particular, we have already released technology that now we are scaling to capture those additional requirements. Autonomous drive as such is coming, is not yet fully there. We are working on that, and we also expect here the same trend, meaning, what remains gets tougher requirements. If for EV this was more into the insulation and conductivity and high speed, we see autonomous drive coming with the requirement on longer mileage, reliability, data redundancy, and digital twins. Also those type of technical requirement will increase the importance of engineering capabilities within the bearing domain, and that is why we also see autonomous coming as an opportunity for us.
Okay, thank you. Keeping it to the R&D part, I mean, it seems like you are doing a lot of interesting things within R&D, but just to understand the commercial point of this, is the most important part to win new deals, take higher prices, or to just keep your market share? What would you say on that point?
Well, our strategy is a combination of all of these aspects, and it is difficult to comment on them individually. What we can say is that for us, what is meaningful from an R&D perspective and our ultimate indicator if we are successful or not is if we can get customer awards. As Fredrik said, now we are having 50% success rate on the incoming numbers of quotation this year, and 60% of this is coming through EV and new platforms. This is for us an indicator that our technology is recognized in the customer selection process.
Hampus.
Hampus Engellau, Handelsbanken. Two questions for me. This is a bit of an analyst question, but I take it anyway. If I look at the prospectus, when you looked at your different markets, I do a really easy calculation on that. I arrive at around 2% market growth. If I am assuming around 10%-15% BEV exposure in your business, and you are growing in line with BEV, then you are growing around 3%-3.5%, so you are growing faster than your market. Am I missing any? I am not expecting you to give details, but just is this the way we should look at you, or is there another level that is for you to grow?
Thanks, Hampus, for the question. The numbers you are presenting are your numbers and your assumptions. What we see is that, say, the EV market is both in the PV and the CV segment growing much more. We talk about 12% and 20%. We also revealed that our industrialization pipeline is positive and very much tuned towards EV. In this setup, somehow, we are seeing why, like, this is the reasoning why we see that we can grow above market, because the market is growing 1.7% expected during the next years. That is the logic behind, and we will continue to focus on those, say, growth segments. We also spoke about commercial vehicles, last-mile delivery vans. All those areas are of great interest.
Thank you. Another total different question. If I look on the auto industry now, some OEMs are more treating China as China. They are running their business as separate ecosystems. We also have a lot of German OEMs focusing on specific cars for China, and China are also focusing on specific cars for Europe. How is this changing your way of working? Is it in any way creating more work for you, or how should you think about that? From a more safety perspective, is running separate ecosystems something that you also have to take in when you work with these type of OEMs? Thank you.
I would like to start answering your question around, say, more the how we organizationally think about China. Then I think it would be great if you elaborate a little bit on our R&D in China. But I start now with the organization in itself. Something we haven't elaborated about today is exactly how we are organized. But one of the things which we have decided early on in our organization is that the R&D and the plants in China are actually reporting to our head in China. Hao, who's not here today, he's engaged with customers, and he is then, like, having this integrated kind of one China model. It's not only China, but also APAC, so the Southeast Asia and Northeast Asia as well.
This has been a setup that I've seen in the automotive industry working quite well, because there is so much need for speed and direct decision-making, that you need to have somehow all the functions under one roof. It doesn't mean that they are disconnected from your area, for example, Federico, but they need to run on their own and their own premises. So that is something that makes a lot of sense. I think the other part of the question also including, say, the ecosystem and the safety questions, I would like to pass on.
I think you mentioned China, but when we look at those local requirements, we see our customer working in two ways. We have global customers that push the same global standards everywhere into platform development, but then we have customers, also global customers, that act with local specification for specific model. This is for China, for India, for Brazil. Our organization is developed to cope with both, because we have local teams that work specifically on local needs, but then we use more broader technology platform and standard for aligning those local needs when we call it to global standards. So, the right reply here, it's a balance in between the two aspects, and China is pushing this now more to the local for local part. We have seen this in the recent years, and you properly said now, China players moving to export vehicles.
They are also more moving to this global requirements level. So, the ability to be capillary close to customer in the local environment, but also scale globally our knowledge, is what we believe is essential to cope with those needs.
Maybe just to add one additional thing. If we see now the EV development, the powertrain development in EV, very high voltage and very high requirements, our China team is also globally leading these developments, and then they are bringing this knowledge into Europe, U.S., and so on.
Yes.
Very good. We love analyst questions, so I will pick up another one here from online. It's a data point that been picked up that there are a plan to transfer 15 production channels from SKF to SKF Vertevo in China.
That's correct.
The question is that included in the 2027 items affecting comparability?
It is included in the CapEx part, and very small parts also in the items affecting comparability. Yes.
Thank you. Then we are coming back to the topic of what might have kept growth down in the past. Have you declined deals when as being a part of SKF Group due to SKF Vertevo then being dilutive to group margin, and not being there now, is that one of the reasons for why you are confident on the growth path?
I talk about the future. I think now, being standalone, we have opportunities to grow on our own merits. I mean, we can then also ensure to invest capital into those areas that make sense. We can focus also on business that makes sense. We have done a journey during the last years to improve the quality of our portfolio, and now we really look into growth going forward.
Thank you. Then we have a question, I believe, for Niclas concerning the balance between inflationary pressures on the cost side and your ability to price that. The question is, how should we think about inflation linkages to the extent there are raw material surcharges or similar, given the pressures on cost we are seeing in the world? If you would comment on the balance between cost pressures and potential price increases to mitigate that going into 2027.
Yeah. No, but of course, we see what everyone else see, that there are inflation and cost inflation coming into our P&L as well. But we have customer contracts where we can transmit and push it forward in the value chain to our customer to a certain extent. Of course, we also need, as everyone in the value chain, work on our own productivity to mitigate inflation. It is a two-part game here, you can say.
Thank you. Then we have another question which focuses on the balances of your footprint in terms of where you have your salaried employees. If you could comment a bit more on the balance between what we think about as high-cost countries and the need to move out of that, and your position in more low-cost or best-cost countries, being it Mexico or India or whatnot.
I mentioned earlier that we have 65% of our workers currently in best-cost countries, and then obviously the 35% in higher-cost countries. It is very much up to where our customers want to purchase our products. Some customers would like to have some kind of geo-flexibility, a European or North American customer asking us to take half from a best-cost country and the other half from a local production, and then we will adhere to that. Other customers are absolutely fine with China only, and then obviously there are some who say, "Please produce not more than 200 km from my plant." So, it is really to say that the customer interest, and we will be then also dimensioning and looking into further asset shifts or changes in our adjusting workforce, depending on customer needs going forward and requirements.
That is, again, our stronghold in SKF Vertevo to have such a global manufacturing footprint and being able to flex. This is a big advantage in our dialogues in the RFQ process with our customers, and we will continue to play on that.
Thank you. Completely different topic, a question on the, I guess, is governance related, and if you could comment something about how management incentive programs are, what drivers are they connected to? Are they directly linked to the financial targets that you have introduced here today or presented here today?
Management incentive plans, they are short-term and long-term plans. The basis is really growth, efficiency, and also capital efficiency. We have also incentivization in the long-term plan around sustainability, that is CO2 emissions, for example. This is to say that the broad base and the intention of our board is then to mirror the interest of our owners, of you all together.
Thank you. Question from the audience.
Thank you very much. Shaqeal Kirunda, Morgan Stanley. Could you please tell us a bit more about the nature of the CapEx projects in the next few years, and then also some color on historic free cash flow generation and how you see this evolving into the medium term?
Sorry.
Should I start and you continue?
Yeah, sure.
I start with some major CapEx projects. Niclas was saying this already before, we will have next year elevated level on CapEx, and these are connected to asset transfers, and then finalizing also a large warehouse in Belgium, a European distribution center. These are the main parts that are comprising on the same or extraordinary spendings, which we will be seeing. Then we have, of course, underlying spendings which are connected to new customer projects, general need for capacity increases in certain regions for certain product types. Those are the projects which we have in the pipeline now going forward. And you want to?
Yeah, I think when it comes to the free cash flow question, it is relevant because if you read our cash flow statements in the prospectus, it is heavily burdened by the one-time cost connected to separation over the last couple of years. I think the best guidance here is to look at the adjusted numbers. So take adjusted EBITDA that we have provided, and then you see also our level of CapEx. So that could give a guidance on the historical levels. Going forward, I think we will be more clear in our guidance. We have given you profitability levels, and we have given you CapEx and IAC guidance as well.
Hello. Yeah, thank you very much. On the potential restructuring programs, is this something for which you have already started negotiating with the unions, or is this something that you see starting in the next few months?
We have been adjusting workforce in Europe for the last years, and this is, of course, normal that we are in constant dialogues with our unions, and we will continue to do so, and the dialogues are good. And yeah, for us, there has been already quite large changes during the last years. And again, this is something we always do together with our unions.
Thank you.
As a follow-up to the previous question on CapEx and the distribution center, can you say something about the payoff or the time for the investment in the distribution center to become a profitable investment?
The distribution center today, we are sharing the distribution center, and tomorrow we will have two different distribution centers. We talk about a change that is benefiting both companies because we are simply going to expand the amount of space we have in this distribution center. With that, it is somehow benefiting two companies, and that is why we decided to go this way forward.
A specific question on the development of the commercial vehicle business. Do you see this in the plan that you presented today? Do you see the share of commercial vehicle revenue increasing as a share of the total?
The overall market is growing a little bit softer in commercial vehicles. It was around 1% compared to 1.7%. We are, of course, not steering the demand, how many trucks are actually being bought in Europe. We also know that these programs are very long. It is a bit more steady in commercial vehicles in general. But the part which we are focusing on a lot going forward is the electric part and also the last-mile delivery. Here we see extremely high growth rates, and here we are focusing on.
Thank you. The next question, you have touched upon it several times, but I will let you hammer home the point again. Why and what makes you confident that you will hit that 8% margin ambition?
We have a clear roadmap in front of us. We have clear initiatives in front of us with exiting contract manufacturing, growth as an operational lever, and also a lot of efficiency measurements, which are key for us to become a true automotive tier one company and become much more efficient in how we operate. These are not only high-level plans and PowerPoints, but we have a lot of detailed plans behind it and a motivated team to bring it forward. That makes us together confident that we can meet those targets.
Thank you. Okay. Thank you so much, Kerstin, Federico, Niclas.
Thank you.
Thank you.
Thank you.
That brings us to the end of SKF and Vertevo's Capital Markets Day. On behalf of SKF and Vertevo, I would like to thank you all so much for participating, both here in Stockholm and online. A special thank you to SKF and Vertevo's management team and to all of those of you participating in the Q&A sessions. For those of you that are here in person, we invite you to stay for some refreshments and more room to ask questions. For the rest of you, I wish you a very good day. Remember, first day of trading is December 1st. Thank you.