Hey. Welcome, everyone. Thank you so much for joining us. This is the Wolfe Materials of the Future Conference. We are hosting Alcoa. We've got the CFO, Molly Beerman, with us. Delighted to have Alcoa join us. A lot to talk about. We are just going to kick off with a bit of a discussion about kind of where we sit in terms of aluminum, aluminum markets, and anything you want to provide for us in terms of thoughts on this second quarter that we're wrapping up. Thanks again.
Thanks, Timna. Welcome, everyone. Thanks for joining us. Couple of comments on aluminum. Definitely the material of the future. Very exciting for us. Aluminum, part of our everyday lives and our cars, our homes, our offices, part of most industrial processes and products, packages, the things that we consume and use. Definitely a long-term good growth prospects related to the low-carbon transition, preferred in renewable energy infrastructure, solar panels, wind turbines, transmission, electric vehicles. Great long-term prospects. We believe quite strongly in this and in alumina. We feel like we have a great product. We have capabilities and strength in our assets to deliver for our shareholders. If you look at the second half of the year or the first half of the year, very busy. Tariffs have dominated, as your research paper mentioned, dominated the discussion.
First, we had the 25% tariff, the loss of the Canadian exemption on Section 232, and now the movement to the 50% tariff. Alcoa is watching this carefully, looking at how it's impacting the broader aluminum industry, its impact on the Midwest premium, supply demand, as well as the LME price. So far, we're seeing no evidence of demand destruction, but watching carefully for that. I do have a bit of updates on our second quarter, if I could take a moment to go through those. So far in the second quarter, we've done a very good job to hold performance to our earlier guidance, the exception being the tariff impacts. We managed to limit a potential $30 million tariff cost increase related to the 25%- 50% rate change to only $10 million.
That was by taking commercial actions to redirect our Canadian-produced metal to customers outside the U.S. That does decrease revenue as more tons earn the lower Midwest duty unpaid premium, but it preserves more margin. For the second quarter only, reflect 40% of shipments on duty paid Midwest premium and 20% on duty unpaid. That's a 5% swing from our existing guidance. Two changes in guidance related to the higher API today versus the API in mid-April when we guided. First, the aluminum segment's benefit from the lower API is trimmed to $140 million from the prior guidance of $165 million. Second, with improved projected annual earnings at current prices, the tax benefit that we had expected in the second quarter is eliminated. The tax provision for the second quarter will approximate zero, with the first quarter catch-up tax benefit and second quarter tax expense nearly offsetting.
Lastly, on interest expense, we expect an unfavorable impact of about $15 million related to recent unfavorable value-add tax assessments.
To summarize, the impact of tariffs could have been $30 million. It will be $10 million in the quarter. That is the additional 25%-50% that was announced end of May, right, at the famous Pittsburgh rally that we were talking about. The other component is the tax item that would have been a benefit and now be neutral or zero tax. The other impact, I think we had done some of our own math in coming up with the alumina benefit from lower alumina prices mitigated in the aluminum segment. Just one clarification question is, would you not see some more benefit in the alumina segment from that, or is that separate?
You'll get that when you use our sensitivities. Yes, absolutely have the benefits of a higher API.
For those of us who have been following Alcoa for a while, for me, it's been 14 years. Alcoa has done a lot to try to simplify its business. We've talked about this, and it's been a focus. So Ma'aden is sold, or is it sold?
About to close.
About to close.
Right around the end of the quarter.
Okay. Almost sold. We can talk about that. The Alumina Limited JV is no longer, so that partnership is 100% owned by Alcoa now. Unfortunately, exogenous items have made Alcoa maybe a bit more complicated. Can you, in your own words, just describe to us how to think about the impact of the tariffs on your Canadian operations and the offset on your U.S. operations? If we were to see any change, we can have some framework to think about what that will look like with tariffs.
Okay. Let's start with a 50% tariff and that increase effective on June 4th. We did see the Midwest premium almost immediately rise to $0.68 per pound. That was over the May average, which was right around, I said ton, but I meant pound. That was compared to the May average of $0.38 per pound. Since that time, though, we've seen the Midwest premium decline. It was $0.57 at the end of last week and now even lower today. If you look at Alcoa and our distribution, we have two smelters in the U.S. producing about 290,000 tons. They absolutely benefit from the higher Midwest premium. However, we have 960,000 metric tons of Canadian production, and about 70% of that is moving to U.S. customers. If the Midwest premium had reached $0.70, that actually would have been a good impact for Alcoa, a favorable impact.
With it being below 70%, not getting to the parity needed to incent import tons, it's actually a negative to us. We're paying more in tariffs on our Canadian production than we're earning on our U.S. tons.
For now.
For now.
I think that's the dynamic, right? You have the Canadian tons that need to get to a certain threshold to break even to ship to the U.S., and then the U.S. tons that benefit from the higher Midwest premium. That's the math. I'd like to hear in Alcoa's words what outcome you would like with this current tariff environment. Because the U.S. is so net short aluminum, we do rely on a lot of Canadian tons, which Alcoa and others supply, and other tons. I guess it'd be helpful to just hear in Alcoa's words what you'd like the outcome to be of the current tariff environment or how to think about it.
We've been having many discussions with the U.S. administration, and maybe the early conversations were more about education, trying to help them to see the differences between steel and aluminum. Steel that has the domestic capacity available to ramp up. Aluminum, we're 4 million metric tons short, so that's the value of our annual imports. Also talking to them about the tight integration between Canada and the U.S. and the job dependencies between the regions. Also focusing on power. A new Greenfield aluminum smelter might need 12 TW of electricity, and we would need that at a delivered price at under $40 per MWh to be economic. The U.S. administration was not necessarily understanding these benefits or these challenges until we started the discussions.
Lately, our discussions with them have been more about the negative impact from the tariffs on Alcoa, as I mentioned, as well as the broader issues on the industry, possible inflation and demand destruction. Those conversations are continuing. We're working both sides of the border, talking to the Canadian government and the liaisons there, working with the Aluminum Associations in both the U.S. and Canada, talking very closely with the U.S. administration leaders, Trump's direct reports, trying to make sure that we're advocating for a position that will provide possibly a Canadian exemption or at least some level of Alcoa-specific relief. We're trying to impress upon them that we're a U.S. listed company headquartered in the U.S. We invented the aluminum industry way long ago, and we're in the best position to grow the U.S. industry, which is both of our priorities, both the government and Alcoa's.
That's going to lead to my next question. Is Alcoa prepared to respond with more production? And separately, do you think anyone will add capacity because of the tariffs and then 45X in that mixture? I know that's because those kind of go hand in hand.
We've been talking to the administration. We are absolutely willing to invest in our current U.S. operations in exchange for tariff relief. However, if you look at a Greenfield development, you really have to have view to economic power and 20- 30 year power contract. We've been talking to them about the importance of an industrial energy policy that would support delivery of energy at, again, less than that $40,000, sorry, $40 per MWh . Those conversations continue.
Okay. But Alcoa not necessarily planning to build a $3 billion-$4 billion smelter that would take what?
Six to seven years.
Seven years. Century said they are looking into it, and EGA has said that they're planning on one in Tulsa. Can you talk to those projects, or does that move the needle in terms of filling up the remaining demand that isn't met by U.S. production?
Both of those projects have not given the specifics on the energy contract. For us, that's a key piece of information. I think they're both planning around 600,000-750,000 metric tons. That would still leave the U.S. short on its at least 4 million metric tons today and growing to over 5 million metric tons in the projections through 2030.
Okay. And then we touched on, I mentioned 45X. 45X is effectively a subsidy to aluminum smelters in the U.S., of which there are four left, right? The latest big beautiful bill proposes to put a finish line, expiration date on that. Can you comment on that as well?
Yeah. The House version of the big beautiful bill has a quicker phase-out. We would move to zero by 2032. The Senate version from yesterday is a little bit longer timeline. It starts a year later and ends a year later, but we would be phasing out that benefit. That's important for us now. We're getting $50 million-$60 million a year in support under 45X. It's 10% of operating costs exclusive of your raw material. It's a big item for us.
Great. Before we leave the U.S., you mentioned that you haven't seen any demand destruction. I know that you just produce and aren't necessarily in the weeds with the customer. How concerning is demand destruction, do you think, with 50% tariffs?
I think it is concerning. What we're seeing immediately now, and this shows up in our second quarter order book, which remains strong, our rolling and extruding customers are actually getting more orders from their customers because the end customers are preferring domestic supply during these periods of uncertainty. Initially, we're not seeing the destruction. However, if it lasts longer, we do worry that inflation will work its way in. The producers will not be able to offset the higher costs at the 50% tariff level. Eventually, that will result in higher prices to the end consumers.
Okay. Great. So around the world with Alcoa, I guess we'll make a stop in Spain next. This is a hot topic for those of you close to Alcoa. Spain, San Ciprián, had a big power outage. You shut operations. I believe you're still shut. Can you give us an update there and what you're seeing, please?
Yeah. We had begun restart of the smelter there at the end or middle of April. We were only about 10% resumed with the restart when the power outage hit Spain. That completely brought down the smelter. We saved only a handful of pots. The refinery went down as well, but it has fully recovered. We are not going to resume the restart of the smelter until we get some answers from the government authorities on the root cause of the power outage, as well as the corrections that are being put in place to make sure it does not recur, and as well as understanding what higher costs will come if they need to manage the grid differently, what that looks like, how much of that is going to get passed on. We understand they did issue a report this morning from the government.
I've not had a chance to digest that yet, but we'll do so. As of now, we're pausing the restart.
Okay. Should we stay in Spain, or should we go to?
Can I make one more?
Yes.
In Spain. I do want to say we did issue a force majeure to the Works Council notifying them that we will not meet the obligations under the viability agreement in relation to the 2025 run rate production.
At today's economics, with the LME price where it is, do you feel confident that Spain, under the right power agreement, can be profitable over the medium term? This is a location that's been there for a long time. It has a lot of importance to the Spanish government in the region. How do you feel about it longer term?
The smelter does, our business case for the smelter does eventually get to profitability. We believe we'll have two difficult years as part of our recovery plan this year and next, but that did assume that we would get fully restarted by the end of this year. We'll relook at that with the changing story on power. The smelter has the opportunity to be profitable. We have actually great assets there. The workforce is very knowledgeable. They're experts. They really know how to run the operation well. The refinery also has a great team, but the economics are a bit more challenged. We've got the residue storage area that's undergoing some CapEx to be able to fortify that and to maintain production. The smelter has long-term profitability prospects.
I'd like to hear your latest on China, actually. I know you don't produce there, but I figured if we're traveling around the world, and China has talked about a cap at 45 million tons annually. We're hearing good things about demand. Just your latest on the Chinese market, since it's such an important part of the aluminum market?
While Chinese demand has slowed, that was largely expected. It's not gone negative. It's just slowed. We're seeing other areas like India and other developing Southeastern Asian nations pick up and cover for that. For example, in India, we're seeing 7% CAGR primary aluminum demand growth through 2029. You're also seeing the Indonesian products come online. In the past, we maybe saw smelters coming up without regard to the economics. In Indonesia, we actually see them adjusting the project schedules to the economics. It seems to be a very disciplined ramp-up, and it does seem that it will be more in line with the growing demand.
I want to ask about the opportunity to sell idled assets to hyperscalers, et cetera. Any updates there or maybe an overview of what you have available?
We are entertaining conversations with hyperscalers now on our former smelter sites that have energy infrastructure remaining. You have to understand when you talk to the hyperscalers, though, they're casting their nets wide. They're talking to a lot of people. It doesn't necessarily mean that we have a transaction that's imminent. We will continue those discussions, though. If you look at what we call our transformation portfolio, there are 20 idled sites that are in various stages of remediation. A handful of those would be valuable for data center use. Some of them have port access or own the ports or could be used for warehousing or other manufacturing capabilities. We continue to market these. Probably the most value resides within our Messina East curtailed smelter that could be valuable for a data center.
We also see value in Point Comfort that has a port connected to it. We are currently marketing the Point Henry former smelter site. That is primarily a land value. That is located on the coast of Australia near Geelong. There is value there as well. Nothing imminent or to report today.
For reference, in 2021, you did two transactions, and I do not want to get the values wrong. I thought they were about $100 million each. Can you remind us what those were and if they are comparable to any of these?
Rockdale was actually $250 million. That was why sometimes patience is a virtue. Our first offer for Rockdale was about $60 million. We held out for three years and got the $250 million. We also monetized East Alco. That was $100 million. Both of those were in 2021.
Assuming there's some inflation since then in these assets.
I hope so.
Okay. All right. Great. I wanted to touch on the balance sheet. I think one thing that's kind of lost on people maybe is that you don't have the pension anymore. You're not in the pension business. And then you don't have the cash flows going to Alumina Limited. Ma'aden is cleaned up almost. Can you give us a state of the balance sheet and how to think about cash uses going forward?
We recently updated with a new net debt, adjusted net debt target at $1 billion-$1.5 billion. If you look at the end of the first quarter, we were at $2.1 billion. We still have a bit of delevering to do. We had expected to advance that through the rest of 2025. We have paused for a little bit looking at what the tariffs and the uncertainty cause, but we hope that we will continue to delever through the end of the year. As we start to approach the high end of the net debt target, we will look at returns to shareholders, portfolio actions, as well as growth opportunities as a way to deploy any excess cash. Our balance sheet today really gives us a lot more flexibility than the balance sheet that we had at separation. Remember, our adjusted net debt then was $3.8 billion.
We've done massive amounts of work on the pension. That is now fully funded in the U.S. And our OPEB, while it's still about $500 million, that's a liability that's declining. You don't generally fund OPEB liabilities, but that's about a $50 million a year cash cost. So balance sheet's in much better shape than we were several years ago.
When you think about the math, do you include the Ma'aden sale in the deleveraging? And does that not get you year-end into close to that target? No?
The Ma'aden, as I mentioned, is scheduled to close right about the end of the quarter. We have a three-year lockup, so we can only monetize a third on the third, fourth, and fifth anniversaries. Now, as a part of that transaction, we have the ability to monetize or hedge the shares if we would need the cash or if we want to use the cash for a strategic opportunity. We're not necessarily counting that in today's view of our adjusted net debt position, but it's certainly there available to us. Any action that we would take to hedge or monetize comes with a cost. We do not really need the cash right now, but that is available to us if and when needed.
Gotcha. In the past two years, Alcoa has been putting out fires and fixing. How do you think about the growth opportunities for Alcoa?
We are positioning for growth, not only in our current portfolio. You saw last year we funded a lot more return-seeking. We have some very credible and viable Creet projects, as well as we are moving to add value-add capacity specific to what customers need. Adding some capabilities to handle more recycled content, primarily to address European need from the European autos. We also, though, look at other opportunities in the industry. We do have our CorpDev team is busy looking. Nothing to announce, but we are always open to the opportunities in the industry, but nothing more to announce today.
Okay. I could keep going, but I'm going to open it up to people on the floor if they want to ask some questions.
You may not want to talk about it, but what was the resolution of the pension issue? How did you deal with that? What was the mechanic of it? I mean, you look at things like Eastman Kodak and whatever, which had an overfunded pension fund if such a thing is possible. I am just curious to know what measures were taken to reconcile that, because I think that is going to be an exercise that a lot of people are going to be looking at going forward.
To deal with our pension, it was many years of chipping away at it. We kept every time we had excess cash paying down. We also did some debt to lower the pension. As we've been able to get the pension under control, we have passed a lot of it to insurance companies to annuitize. It has been a whole series of actions over time to deal with the pension. Both the U.S. pension, and then we've also taken care of the majority of exposure on the Canadian pension as well.
All right. I was hoping someone else would ask this one, but I will ask it. How can you characterize your conversations with the Trump administration? Everybody wants to know your level of confidence on any carve-out. So what can you tell us?
It's hard to speculate on that, Timna. We are actively engaged in conversations. As a matter of fact, Bill was in Canada last week working with the representatives on that side of the border. He actually had a follow-up call with Secretary Lutnick last night. We are very actively engaged with the administration. We're not going to make predictions on when this will be resolved, but we stress to them the importance of that free flow of Canadian metal into the U.S. to serve the U.S. industries. The auto, the aero, defense are all depending on that supply. There's a lot of job dependencies. Focus on that, and we need the tariff-free flow.
It seems like there's the demand side. I don't think the Trump administration necessarily wants high aluminum prices. I mean, do you think that the education efforts are being heard? Because you said it started out education on the industry. Do you think that that's been fruitful?
I do think they expected some level of price support that would incent us to develop our own industries. That, I think, was the initial hope with the tariffs. We've been spending time showing them, though, in our case, it's actually hurting because of our Canadian volume. There is just not too much more to add on that one.
Okay. Any other questions from the audience? Okay. I can ask a few more. In your mind, I mean, you get a lot of questions on tariffs. You get a lot of questions on Spain. What do you think people aren't talking about? What's the opportunity at Alcoa? Is it aluminum demand? Is it growth? Is there something that you think people are really missing? I'm sure you don't want to just be talking about tariffs in every meeting.
I do want us to be appreciated. Now, the stable production of our operations, if you look back in time, it almost seemed like we always had some issues. We have been producing stably for many quarters now consecutively, hitting record production, hitting our productivity goals. Last year, we had the $645 million productivity program. We overdelivered on that. In the areas that we did not meet, we baked that into the 2025 plan, and we are on target to deliver. I hope that our shareholders and interested parties see that we are producing stably. We keep our promises on safety and continue to focus on productivity as well.
In Australia, there's been some noise in the past and some government relations that were not ideal, but it seems like things are improving there. Can you give us an update on the dynamic in Australia? You did shut a refinery a while ago, but also seems like you're on track to get to the better quality bauxite by 2027. Any update or concerns there?
We are progressing right now with our approval for our new mine region. Right now, it is in public comment period. That is with Western Australia EPA. Started that in May. It will last until about the middle of August. This allows the community members to weigh in on our long-term mine plan so that they can see our full plan for the development of the mine as well as the eventual closure. That is on track. During the comment period, we do not get to see the comments that come in. At the end of the process, the EPA will summarize those. They will give them back to us. We will have a period to comment on those. Once the EPA is satisfied that we have responded fully, they will make those public. They will post them on their website. From there, they will issue their report.
We, along with the EPA, are driving toward early 2026 for official approval. That allows us then to do our mine move. It'll take 18-24 months. We'll move into the new mine region no earlier than 2027. That'll take a period of phase-in. By 2029, we should be fully into the new mine region. At that point, we'll pick up about 1 million tons of additional aluminum production, as well as have a $15-$20 per alumina ton cost improvement. Very notable financial improvements when we get the mine approvals and complete the mine moves.
Also, any updates? I think people were concerned about Guinea, given some of the politics there. How's the Alumar ramp up in Brazil? Any updates in those regions?
On Guinea, we have a great relationship with the Minister of Mines. Unlike some of our peers, we never promised to build a refinery as a condition of our mining license. I say we, but I'm representing Alcoa's interest in the CBG joint venture. We have to, every five years, make a proof on the economics of a refinery, but we haven't committed to date to building the refinery. We still have our free flow of bauxite out of Guinea to our customers. On the Alumar smelter ramp up in Brazil, that continues. We are nearing into, we're in the low 90s of capacity, so nearing the end, but that has been progressing well.
I have one more question, and then we can wrap up if we do not have any other questions. Is it possible to hedge the Midwest premium? Is it possible to? Because obviously, so much of your profitability right now kind of depends on that random number that moves around so much from week, well, at least in the last week, it has moved a lot. Do you have any repercussions? How does your commercial team manage this kind of volatility if it is so critical?
Yeah. There really is not an opportunity to hedge the Midwest, but we do with what we call our open volumes. Our volumes that are not under annual contracts, about 90% of our volumes are on annual contracts. With the 10% that is left, we do run. The commercial team is looking at every positioning, where can we have the best margin. They have their net back calculator looking at the premiums, the cost of freight, the financing cost, and determining the best place to ship the metal. We did, in the second quarter, end up redirecting metal that we typically would have sent into the U.S. on spot trades. We ended up keeping it in Canada because it was a better financial outcome. That helped us to reduce some of our tariff costs in the second quarter.
Great. I think we can wrap up there. Thank you so much for your time. Appreciate it.