Greetings, welcome to the Lincoln Electric 2013 first quarter financial results conference call. At this time, all participants are in a listen-only mode. A brief question-and-answer session will follow the formal presentation. As a reminder, this call is being recorded. It's now my pleasure to introduce your host, Vincent Petrella, Senior Vice President and Chief Financial Officer. Thank you, sir. You may begin.
Thank you, Rob, and good morning to everyone. Welcome to the Lincoln Electric 2013 first quarter conference call. We released our financial results this morning, and our release is available on the Lincoln Electric website at lincolnelectric.com, or by contacting our investor relations office at 216-383-2534. Joining me on the call today are John Stropki, Lincoln's Executive Chairman, and Chris Mapes, President and Chief Executive Officer. John will start the discussion this morning and provide an overview of the quarter, while Chris will highlight our top-line performance and strategic initiatives. I will cover the numbers in some more detail. We are using a slide presentation as part of our webcast today, and these slides are available on today's webcast, which is accessed on our website under the Company and Investor Relations tabs. The presentation will also be posted along with a replay of the call later today.
Before we start our discussion, please be reminded that certain statements made during this call and in our discussions may be forward-looking, and actual results may differ from our expectations. Actual results may differ materially from such statements due to a variety of factors that could adversely affect the company's operating results. Risks and uncertainties that may affect our results are provided in our press release and in our SEC filings on forms 10-K and 10-Q. Additionally, we also discuss financial measures that do not conform to U.S. GAAP, and you may find important information on our use of these measures and their reconciliation to U.S. GAAP in the financial tables that we have included in our earnings release. With that, let me turn the call over to John Stropki.
Thank you, Vince, and good morning to everyone joining us on the call. I'm pleased to report that our 2013 first-quarter results demonstrate solid profit performance, even as we continue to navigate through challenging market conditions. Despite the slowing pace of economic growth in many regions and the ongoing persistent economic weakness in Europe, we achieved a reported $0.80 earnings per share in the quarter. As was reported, our earnings were also unfavorably impacted by a $0.12 per-share charge from the recent devaluation of the Venezuelan currency. On an adjusted basis, we achieved a very solid 21% increase in our adjusted EPS to $0.92. Our earnings performance reflects our team's solid execution in a number of important areas. These include optimizing our product and customer mix in targeted regions, generating improved profitability from our operational initiatives, and our continued focus on growing and building out our automation business.
We made good progress in these areas in the quarter, while also successfully integrating our four 2012 closed acquisitions. These acquisitions not only contributed positively to our top-line performance in the quarter, but were also key growth drivers in achieving our longer-term 2020 vision and further enhancing shareholder returns. We are pleased to see these efforts progressing well at this early stage. Turning to slide four, which provides a snapshot of the quarter's P&L items, the trend clearly highlights that our business is showing its hallmark resilience, and our ongoing efforts are showing good results. Despite a 1% decline in net sales on the challenging market conditions and difficult year-over-year comparisons, we delivered a solid 120-basis-point improvement in our operating margins to 13.8%, excluding special items. As I stated earlier, we achieved a 21% increase in earnings, demonstrating that we are making very good headways across our key initiatives.
Now, I will ask Chris to walk through our top-line performance and strategic initiatives.
Thank you, John, and good morning, everyone. Moving on to slide five, our reported first-quarter sales declined 1% to $719 million on a constant dollar basis, which excludes the unfavorable impact of foreign exchange. Our sales held relatively steady on a year-over-year basis. Looking at the components of our reported sales performance, we realized a 6% increase in sales from the four acquisitions we completed last year. These acquisitions include Tennessee Rand and Wayne Trail, who are leading providers in high-growth automation and welding solutions. Additionally, we benefited from ongoing demand for our equipment solutions, led by automation solutions, which continued to generate solid double-digit percent growth in the quarter. Exports, which predominantly sourced from North America, were also higher in the quarter on solid demand from China, Brazil, and parts of the Middle East.
As John just referenced, our volume performance reflects slowing macroeconomic and industrial production growth rates, weak global crude steel production in many regions, and persistent weakness in Europe. As we commented in our fourth quarter earnings call, we expect year-over-year volume performance to be weak in the first half of 2013 on challenging year-over-year comparisons. Persistent weakness in Europe, which we expect to see throughout the year, and from our efforts to reshape our businesses in Russia and China. Moving on to slide six, we are focused on maintaining our presence in core sectors and expanding into high-growth areas. As you can see by the table, which highlights many of our key sectors, we are operating in a dynamic market. We are seeing that the transportation sector continues to expand in several key geographies and specifically in automotive. This growth is most pronounced in China, the U.S., and in Mexico.
The heavy fabrication sector continues to experience weak demand on challenging year-over-year comparisons and excess inventory in the supply chain. These factors have most notably impacted construction in China and mining in Australia. The bright spot remains in the agricultural sector, where we continue to see steady demand trends. Shipbuilding also remains a challenging sector due to lack of investment in Asia Pacific, although Brazil remains a highlight due to ongoing reinvestment in its shipbuilding and infrastructure sectors. Looking at the energy-related markets, which include offshore, pipe mill and pipelines, power generation and processing, we are seeing strong offshore oil and gas investments in the Gulf of Mexico, Brazil, and Asia, which present growth opportunities for us this year and beyond. Pipe mill activity continues to be strong as investments in major global projects continue.
We expect to be able to capitalize on this growth with our extensive portfolio of solutions that target pipe mill applications, including our Power Wave AC/DC 1000 SP complete welding solution. Power generation growth remains solid on the continued strength of the U.S. oil and gas sectors and the LNG market in Asia. Lastly, in the processing market, which includes chemical processing, we are seeing ongoing market strength with the industry announcing several new projects in North America, bringing the total new project spend in the chemical processing industry up to $80 billion in the last 12 months. On a global basis, our end markets continue to signal ongoing investment and positive secular growth, even if at a more modest rate, which present solid, intermediate, and long-term growth opportunities for Lincoln Electric, and we are confident that we are well-positioned to capitalize on these trends. Moving to slide seven.
In the short term, we remain focused on targeting the most attractive investments to ensure long-term profitable growth and successfully completing the integration of our recent acquisitions. I am pleased to report that our efforts are going well and our teams are executing on these initiatives. Also last year, we announced several operational initiatives which reorient our manufacturing footprint to capture long-term growth in key areas, as well as to optimize our cost structure to improve returns. These efforts are also on track, and we now expect to recognize $8-$10 million of benefit from these actions in 2013. We expect relatively even timing of these benefits over the course of the year.
Despite the uneven performance of our end markets and expected challenging first half of the year, we remain confident in our ability to invest in long-term growth, stay on track with our 2020 vision and strategy, execute on our operational initiatives, and continue to drive measurable improvement in our customers' operations, keeping Lincoln Electric as their welding and cutting solutions partner of choice. Now I'll pass the call to Vince to cover our financial performance. Vince?
Okay. Thank you, Chris. Walking through the income statement highlights on slide nine, consolidated sales were down by 1.2% compared with the first quarter of 2012. Volume decreased reported sales by 6%, pricing was relatively flat. Foreign exchange had a slight negative impact on sales, acquisitions contributed an increase of 5.5%. We did have two less billing days in the quarter as compared to the prior year, which contributed to the lower sales levels. First quarter gross profit margins increased 190 basis points to 31.5%, compared with 29.6% in the comparable prior year period. LIFO charges in the quarter totaled $1.6 million, whereas LIFO charges in the prior year's first quarter were $1.3 million. The quarter also included a $1.6 million charge related to the Venezuelan currency devaluation. The improved gross margins were primarily attributable to a better sales mix and operational improvements.
SG&A expense for the first quarter increased 210 basis points. The increase in SG&A is primarily attributable to incremental SG&A from acquisitions and general increases in SG&A spending. SG&A also included an $8.1 million charge related to the devaluation of the Venezuelan currency during the quarter. Excluding this charge, SG&A would've been 17.9% of sales, a 90 basis point increase over the prior year. Operating income for the quarter declined 30 basis points. The quarter included rationalization charges of $1.1 million, primarily related to rationalization actions and asset impairments in North America and Asia Pacific. Adjusted operating income before rationalization charges and charges related to the Venezuelan currency devaluation was $99.3 million, or 13.8% of sales, a 120 basis point improvement. The effective tax rate for the first quarter was 26.3%, compared with 31% in the prior year.
The first quarter tax provision included discrete items related to the reinstatement of the U.S. R&D tax credit and decreases in valuation allowances. Other factors driving this lower effective tax rate were earnings in lower tax rate jurisdictions and the utilization of foreign tax loss carry-forwards. Our 2013 effective tax rate for the remainder of the year should increase to approximately 30%-31%, subject to the mix of earnings by taxing jurisdiction. Diluted earnings per share increased 5.3% for the first quarter compared with the prior year. Excluding special items, adjusted diluted earnings per share increased 21% over 2012's first quarter. On slide two, we show reportable segment basis and excluding special items that North America Welding improved adjusted EBIT margins by 30 basis points in the first quarter. Good cost control and pricing improvements drove the increase in spite of a slight decline in year-over-year volumes.
Europe Welding's adjusted EBIT margin declined 50 basis points in the quarter. The decline was attributable to a 7.2% reduction in year-over-year volumes and a softening in pricing. We experienced better top-line results in Germany and the Netherlands, weaker results in Russia, the U.K., and Southern Europe. Rationalization actions helped to offset this macroeconomic weakness. The Asia Pacific segment recorded an adjusted EBIT improvement of 40 basis points from the prior year. Sales in Asia Pacific were down 21.8% due to volumes, pricing declined 2.1%. The volume decreases were primarily caused by the continuing softness in the construction and related machinery markets in China. In addition, Australian volumes declined as a result of lower mining and large-scale project activity, as well as the general industrial slowdown. Improvements in the China business unit results were partially offset by the market weakness in Australia.
South America Welding adjusted EBIT margin increased 670 basis points compared to 2012 because of significant improvements in our Brazilian operations and strong price increases. The price increases were primarily caused by the higher inflationary environment in South America, particularly Venezuela. The South American segment included a $9.7 million charge related to the devaluation of the Venezuelan currency. The Harris Products Group expanded first quarter EBIT margins by 50 basis points. Improved mix and continuing operational improvements drove the margin expansion. On to capital allocation. During the quarter, we paid no cash dividend, as the fourth quarter included an additional dividend payment of $16.5 million, which normally would have been paid in January of 2013. Our first quarter capital spending increased to $15.1 million. Our 2013 capital spending plan is still estimated to be about $60 million, primarily associated with significant reinvestment projects in our North American business.
During the quarter, we spent $12.8 million repurchasing about 229,000 shares for treasury. Additional share repurchases during April total an additional $10 million as of yesterday. The quarter included $50 million of voluntary contributions to our U.S. pension plan, an increase of $32 million from the prior year's first quarter. We ended the year with no net debt and over $248 million of cash on the balance sheet. We will continue to invest in our business for the long run and prudently return cash to our shareholders. With that, Rob, I would like to open the call for any questions.
Thank you. Ladies and gentlemen, we will be conducting a question and answer session. If you'd like to ask a question, please press *1 on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press *2 if you'd like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. One moment please while we poll for questions. Thank you. Our first question is from the line of Shon Williams, BB&T Capital Markets. Please proceed with your question.
Hi, good morning.
Morning, Shawn.
I wonder if you could just talk about maybe the progression of demand through the quarter here. Volumes ended up being maybe slightly weaker than I expected. Could you just talk about the cadence through the quarter? How did we start versus how did we finish?
Well, I would say, Shawn, that we started relatively strong and we finished relatively strong, and in between, there was a bit of choppiness. We finished off the quarter with an improvement in our order and sales levels. February wasn't a very good month for us. I would say that there was a bit of unevenness in the quarter. I'll also add that April has continued to be a relatively stable environment for us. There's no reason to believe that we're going to see at least a downdraft at this point in the quarter.
Okay. Maybe if we switch gears just a little bit, could you readdress maybe the restructuring and your goals there in terms of absolute savings? It sounded like at one point last year, you guys were talking about 9-10. Now it seems like maybe you've lowered the midpoint. Maybe it's 8-10 now, despite the fact that there was another $1 million of restructuring done in Q1 here. Could you just talk about where are we within, I guess, in terms of actually realizing those savings? Are we still in the early innings? Is most of this going to be back-end loaded? Then talk about where you are versus expectations.
Shon. First, I'll say that the restructuring charges in the first quarter are not new initiatives. Those are just the follow-on charges required from the original plans that were announced last year. The $1.1 million will not result in additional savings over and above what we had previously disclosed to you. As far as our range, we do believe we have a similar range to what we disclosed in prior quarters and into last year. As far as the attribution of those savings, you can expect to see those pretty equally during the course of 2013. I would simply divide the savings by four, and that's a good proxy for what we will expect to see during the course of the year.
Shon, I think as importantly, as I've mentioned in my comments, the restructuring asset programs that we have, whether that's the Australian manufacturing facility, the facility closure that we'd announced in Europe, in Italy, we've relocated our Vernon tool facility here in the U.S., as well as the consolidation of the facilities in Russia, are all well underway, and we're very happy with the execution of those particular projects and the benefits that they'll drive to the business longer term.
All right. Thanks for the color, guys. I'll get back in the queue.
Thank you, Shon.
Thank you. Our next question is coming from the line of Tom Hayes at Thompson Research Group. Please proceed with your question.
Thanks. Good morning, gentlemen.
Morning.
Good morning, Tom.
I guess two questions. One, the volume declines we saw in the Harris sector this quarter, just maybe provide a little bit more color on that. I thought with maybe seasonality, we would have seen some positive growth this quarter.
I think Harris didn't really see some of the early seasonality opportunity from the HVAC market. I know we're seeing economic numbers out there that show that it's a little bit more favorable. I do know they've seen some more favorable trending at the end of the quarter as well as into early April. I'd also say that some of the European international business for Harris does start it out a little more slowly in the quarter, but we're still very happy with where Harris is at and its continued performance improvements.
Okay, great. Then just kind of a follow-up. The fourth quarter call, you mentioned you were thinking about a potential price increase on the equipment in the April timeframe. I was just wondering, did that occur? Then maybe you could talk about if it was just North America or your thoughts on the magnitude of the change.
It did occur on April 1st. It was announced in North America. It would affect all equipment products manufactured in North America, including an export market. That affects more than 50% proportion of our equipment sales. I would estimate that the impact on the top line would be somewhere around 1%-2% at the top. We also announced a small increase on the consumable side out of North America that will go into effect on May 1st, that will have maybe a 1% or even less impact on the top line. Pricing did not increase in other parts of the world.
Okay. Just real quick, another follow-up. As far as the strong margin we saw in Europe, I guess just what kind of drove the sequential margin improvement in Europe?
Well, it's a combination of the restructuring activities that are lowering our cost base and pricing and cost disciplines.
Okay. Appreciate it. Thanks.
Thank you. Our next question is from the line of Steve Barger of KeyBanc Capital Markets. Please proceed with your question.
Hi, good morning, everyone.
Morning, Steve.
Vince, you talked about the improved mix and the operational improvements as driving the gross margin, you just commented on it for Europe, but how much was mix? Is that mix kind of what you're seeing in April, or do you view it as sustainable through the next couple of quarters? Maybe you can talk about what some of the specific operational improvements were.
Yeah, I do think it's sustainable. We've made some very real changes in our operational improvements, the restructuring is certainly giving us good paybacks as those are folded into our operating results during the course of 2013. I would say that mix is certainly an important aspect of our improvements. If you look at our volume changes in equipment and consumables in those places where we have afforded to us higher margin opportunities on the equipment side, and where we have lower margin opportunities on the consumable side, we're adding an improved shift towards higher margin equipment, away from lower margin consumables on both a geographic and a product line basis. I think it's both of those, mix is certainly a very important aspect of that. I don't see our mix changing dramatically as we look out into 2013.
Okay. That's great. As you think about driving towards those higher margin products, is that as true in North America as it is in other regions, or is it more pronounced in some of the emerging markets or smaller segments?
I believe it's true in North America, as well as in the non-North American regions. Not perhaps to the same extent, but there is a benefit to shift change on a global basis.
Right. With both 4Q and 1Q having gross margins north of 31%, we should be thinking that's a sustainable level as we go through the year?
I don't see any reason why we can't assume that subject to seasonality and any macroeconomic changes that we don't foresee on the table today.
Right.
Yeah. I would add, Steve, that right now, the strongest market, as I think most people recognize, is the North American market. Historically, that has been the highest margin market for us, we expect that trend to continue, as well as this drive for automation, where people are struggling with the lack of skilled labor and also driving to improve their productivity and turning to the higher value solutions. That's an area where we've built tremendous strength through acquisitions and the build-out of our automation business.
It's a good segue. Over the past year, you've acquired about, I think, $120 million in revenue related to cutting and automation. I know you had some robotics business before. Can you tell us how big that total subset of the business is now on a run rate?
It's still less than 10% of our total business.
What do you think the market size is for automation in general, maybe just in North America, or however you think about seeing the growth?
Well, I think you have to be very careful when you talk about market size or try to get the finality relative to market size around automation. I would tell you that there's certainly more than enough runway for us to continue to grow into this industry. When you look at automation, we're really interested in automation that's all about the arc. It's all about welding, or it's all about cutting. There are lots of other areas of space within automation, but that's the area that we're focused in. We don't really think about it from a size of the segment yet, but we're enormously confident that there's still a very fragmented market in automation welding solutions out there, and that we can significantly grow into this space over the next few years.
Steve, one of the really positive things that's coming out of the Lincoln Electric acquisition of these smaller automation companies is the customer relation side. All of the companies had their own kind of niche of independent customers, some very important ones. As these larger companies around the world go to automation, recognizing that there's a skilled automation portfolio that has the backing of a company with the strength of Lincoln Electric attached to it, is really opening up a lot of new windows of which the smaller companies independently were not able to access.
Any way you'll frame up what you think the growth rate in that subset of your business could be over the next couple of years as you introduce these new products into your customer base?
Well, what I will say, Steve, is that over the course of the past year, it's our most rapidly growing segment. It's achieving double-digit growth on both a sequential and a year-over-year basis. I'll just reiterate what both Chris and John have said, and that is that we're enormously optimistic about the long-term opportunities in the automation space. It's a space that we believe will grow over the longer term faster than our core welding business, and we continue to remain optimistic about what we can do in automation.
Last one, I'll get back in line. Can you talk through margins in that business, if not now, but once it's consolidated and integrated? Do you expect that that subset is accretive to consolidated gross margin or even accretive to North American margin?
Yes, we believe it will be accretive to our margins and our consolidated business.
Got it. Thanks so much.
Our next question is from the line of Mark Douglass of Longbow Research. Please proceed with your question.
Hi. Good morning, gentlemen.
Mark.
Good morning, Mark.
Vince, the one-time tax benefits in 1Q, what was the total?
I would normalize our tax rate at about 30%, and through normalization of the tax rate at 30%, I would come up with an adjusted pro forma diluted earnings per share of approximately $0.85. If you strip out what we refer to as special items in terms of Venezuela and the rationalization charges, and then normalize our tax rate after that, I think you're closer to about $0.85 per share.
Okay. That's what I thought. Good. Thanks for that. Then on free cash flow, can you talk a little bit about what happened in the quarter? Looks like receivables increased dramatically. There was something with accrued pension. Not a major concern given your balance sheet and your history of free cash flow. Can you just talk a little bit about the puts and takes, more of the takes, I guess, in the cash flow in the quarter?
Yeah. The two biggest drivers were pensions and accounts receivable. On the pension side, as I noted in my prepared comments, we did put $50 million into the U.S. pension plan this first quarter compared to $18 million in the prior year, so a $32 million swing. Then on a consolidated basis worldwide, we actually had a $35 million detrimental cash swing on pensions as we contributed more on a worldwide basis, the bulk of that being in our U.S. operations. So that is a $35 million decline in operating cash flows because of pensions. Then the other significant change, as you pointed out, is in the accounts receivable area. We did have a deterioration in DSO in our business, largely due to some bigger customers in North America that held up payment at the end of the quarter.
We are expecting that our DSO will improve in the second quarter and moving through the year. That cost us close to five days on DSO. Our inventories were in line with the year-end and actually the prior year as well as payable. We did lose a bit of cash flow from accounts receivable management in the quarter.
Okay. Did some of those flow through already in April?
Yeah, we should see a better result in the second quarter on cash flows than what we experienced in the first quarter.
Okay. Not complete deadbeats.
I would never say that about our valued customer relationships.
Okay, thanks. Finally, again, obviously, a lot of talk about the margin. In general, you're thinking the Europe, Asia Pacific, but what about South America? Are you thinking collectively these can, within obviously a few points of margin, be sustainable barring significant changes in volumes or pricing environment?
Yeah. Our South American business, Mark, did quite well in the quarter. We performed well in both Brazil and Venezuela, two of our most important geographies on the continent. Our Brazilian business had a significant year-over-year improvement in its operating results. Frankly, we did a much better job than what we had anticipated in Venezuela, responding to the significant 32% devaluation of the currency there. Both of our businesses exceeded the expectations for performance in light of what faced our Venezuelan management team, as well as Brazil.
Thank you.
I think that where we sit today, there are no significant unusual items in the quarter. We ought to expect a double-digit margin going forward in South America, barring any disruptions in the environment, any further devaluations in the Venezuelan currency.
Continued kind of high single digits here in Europe.
Yeah. I see no reason why we can't have a similar type of result in Europe as well. Again, caveat being barring any further disruptions in the macro environment there.
I guess let me ask one final question. On Asia Pacific, obviously, volumes are down considerably. If you're comfortable talking about this, what kind of level do you think you need to get to in volumes in order to see, you've talked about long-term, I believe, trying to get to double digits EBIT margin in Asia Pac. Are you really pretty significantly below the sales levels necessary to get there, or how do you think about that?
Yeah, Mark, this is Chris. I'd say a couple of things about that. One is I'd say one of the things impacting Asia Pacific in the quarter is we have seen a pretty significant downdraft in the mining activity in Australia, which we absorbed within the quarter, and we certainly need to understand more clearly what the next six to nine months will look like for that mining industry in Australia. We certainly believe it's just a slight pause, it certainly was a negative year-over-year impact in the business. I'm very excited that our China business showed marked financial improvement for us year-over-year. I wouldn't say that I've got a targeted revenue number out there for us to achieve the operating profit performance that we expect out of that business long term.
We certainly feel comfortable that the actions that we've taken over the last few quarters are foundationally putting that business on good footing, and we intend to continue to drive higher value-added products and services through that model. Certainly, China continues to be an opportunity for us moving forward.
Okay. Thank you, gentlemen.
Hey, Mark. One segment that you didn't address that will have a bit of a downdraft in 2013 is The Harris Products Group segment. The declines in commodity values, particularly silver and copper, will compress our margin profitability in that business unit, as a lot of the pricing is based off of a cost-plus model.
Okay
That means that when silver declines significantly, we will have less margin opportunity in that business. That will be, going forward, a business that will have some downward pressure on margin achievement.
At the same time, with copper falling, that should help out your equipment margin.
Not by the same extent.
No? Okay. Thank you.
You're welcome.
Our next question is from the line of Joe Mondello of Sidoti & Company. Please proceed with your question.
Good morning, guys.
Morning, Joe.
I was wondering, I didn't catch it, but did you quantify the growth in your exports in the North American segment?
No, I didn't. The U.S. export growth was in the low single digits.
Low single digits. Okay. My question is regarding the North America segment. You've spoken a lot of positive things within the industries and within that region, and you're seeing growth in the exports. However, the volume was off one or two points. I was just wondering what am I missing there in terms of the growth there? Are we seeing sequential growth and it's just the year-over-year just hasn't rebounded back to the positives that we may see later in the year? What's going on there?
Yeah, Joe, my view of North America in the first quarter, after considering the number of billing days, was a relatively flattish result. If you were to adjust for the two billing days that we lost and look at our billings on an average billing per day, we'd be somewhere flattish, if not up very slightly, adjusting for those number of days. My view is that we're in a flattish type of environment on a year-over-year basis as far as North America is concerned.
Okay. I guess just overall picture, a lot of my questions have been answered, but just overall picture, it seems volume has been a huge challenge over the last couple of quarters, and it seems like it's continuing to get worse on a year-over-year perspective. On a sequential direction, do you guys feel like the bottom here is maybe the first quarter here, and going forward, we see improvement, and that's why you're comfortable saying that overall margins within all the segments sort of seem stable, and going forward, we maybe see improvement?
Yeah. I don't know about a bottom, certainly if you look at the year-over-year trends, there was a weakening in our trends in most non-North American markets from the fourth quarter. North America held up, we think, quite well compared to our experience in the fourth quarter. I believe it's true that the trends from an international perspective, particularly in Asia-Pacific and Europe, are not improving. We see a relatively stable environment in our most important end market segment being North America, and we believe that the international markets declines are moderating at this point in time.
Okay. Just last thing, I think you spoke some positive things about your Brazilian exposure down there, and just wondering if you feel, or if you've started to hear, are you benefiting from any sort of further construction regarding the World Cup and Olympics? Is that starting to take place or any of that?
Yeah. I was just down at our Brazilian operations a few weeks ago, I do believe that the general economy down there is moving towards more of an upswing versus Q3 and Q4 last year, where the GDP in Brazil, I believe, was very flattish. Just more activity. We've had a lot of very interested large projects who are coming to Lincoln Electric for welding solutions, I just felt more comfortable leaving that market that, quite frankly, some of those larger projects and some of the activities around the World Cup and the Olympics are beginning to gain some traction. Certainly excited about our position in that market longer term.
Okay. Just lastly, how much does Brazil make? How much did Brazil make of the EBIT in the quarter? Do you have that or?
Brazil is not a separate operating segment, We don't report-
Okay
Brazil on its own.
Yeah, I was aware. I just was trying to get an idea just with the whole-- There's a lot of moving pieces with the Venezuelan currency, and so just trying to get an idea of how big that is.
All right. Thank you, Joe.
Thank you.
Our next question is from the line of Matthew Johnson with JL. Thanks. Proceed with your question.
Hey, congratulations on a great quarter. I just have a couple questions. Last quarter, your gross margins benefited from a LIFO gain. Was there any kind of LIFO gain in this quarter?
No, actually, there was a LIFO charge of $1.6 million as compared to, you're correct, Matthew, in the fourth quarter, we had a LIFO credit of about $3.7 million. We've started to see some inflationary input cost increases in our business, and that necessitated the requirement to take a LIFO charge in the first quarter of this year.
Got you.
Year-over-year was relatively flat. The prior year's LIFO charge was about $1.3 million. We're seeing sort of similar start to the year that we saw last year.
You talked about volume being down 2%. You talked about on an average billing day basis, it was flat, maybe slightly up. You said April's gotten a little stronger or even stable. Is it fair to assume that April so far, volumes are up year-over-year in North America?
I think that's safe to assume.
Got you. My final question for you is, you've always said your revenue is tied to steel being made the price of oil. With oil getting pounded here recently, are you guys afraid that your orders are going to slow up if orders are stayed in this $89-$90 range?
Yeah, Matt, I just returned from a trip to Asia where a lot of the oil and gas activity is taking place. In the three different countries and regions that I visited, there was very robust activity. These projects are not stop-and-go kind of projects, I think they have a long-term investment theme. I didn't hear from any of the constituents that I talked to any concern over the minor drops that they've seen in the price of oil. I think they recognize there's a long-term need, they're going to continue to build out the infrastructure that's associated with that. We've seen that, as Chris talked, in Brazil with significant investments. We're seeing it in Mexico and in the U.S. with significant investments in the Gulf of Mexico. We think that the long-term trajectory in the energy sector is very positive for the company.
Got you. Sorry, one more question. Can you talk about your competitive pressure in the U.S. pipe to ESAB coming back in with Colfax?
I would just say that we feel very confident in our business model in terms of the products that we have for the market and the expertise of our organization and in the strength of our manufacturing, we don't generally look back over our shoulders.
All right, perfect. Thank you, congratulations on a great quarter.
Thanks, Matthew.
The next question is from the line of Stanley Elliott of Stifel. Please receive your question.
Good morning, guys. Thanks for taking my questions, and congratulations as well. A quick question on the SG&A. Is all of that increase as we're kind of running closer towards 18% of sales, is all that from the recent acquisitions last year? You also have made a comment, I believe, about higher general spending. Are there other investments going on? If so, what is that?
Yeah, we did add over $7 million of SG&A from the new acquisitions. We also, Stanley, have been adding costs and building out some of our strategic initiatives. We've taken in some of the bigger engineering and sales classes from a headcount standpoint over the past couple of years than we've had in our history. That coupled with a decline in the top line certainly doesn't help our ratios at all. We also have in that line the $8.1 million of Venezuelan charge that you need to pull out. If you take out the $8 million and you consider the acquisition increases and some of the additional spending that we're investing in our business from a long-term perspective, we think our SG&A line is currently aligned with our business realities of 2013.
In regards to the larger headcounts within the class, are you talking about, my numbers may be off, but I vaguely remember like 150, something like that. Are we talking now about 200 or any help there would be great.
No, it's not in the hundreds. It's more like dozens.
Okay.
Be the better measure.
All right. I'll take it all in. A couple weeks ago, there was a The Wall Street Journal article talking about some pipe ruptures in, I believe it was Arkansas, and it's not arc welding, but it was electric welding. Certainly not what you all are doing right now. On those types of projects, and I've always thought about a number of long-tail type projects within the energy space, but I hadn't really thought about retrofit in regards to some of these previously electric-welded pipes. Is that in the mix for you all as well, or do those pipes get retrofitted in a different method?
Well, I think it's not a simple answer, but I will say that in the broad sense, there are significant miles of oil and gas pipelines within the United States that have outlived their design life. Many of which, as you stated, were non-arc welded, but electric arc welded, which is a very old process used many years ago. I think that the pipe mill industry could answer the question better than we, but they have made significant investments in the U.S. over the last four or five years with the very strong expectation that those pipelines are going to be replaced. Whether it requires these failures, as you identified and as The Wall Street Journal talked about, to drive that process or not, I don't think we really know.
We do know that they will be replaced because the gas companies want to use higher pressures to get better deliveries. The corrosion elements of the pipe that have been in the ground for many, many years is eventually going to rear its head and will require the replacements that I think most people are anticipating is going to happen sooner rather than later.
Absolutely. Lastly, can you guys quantify or care to quantify how much the volume declines in Europe and Asia-Pacific were from your conscious decision to kind of exit some less profitable business, or how much it is more market-driven?
It's very difficult for us to put a measurement on that. When you're going through that level of activity, you're trying to make improvements across a host of products and various customers. We're really not providing that guidance relative to how much of that's from the activities that we've had in some of those markets. Again, I would reiterate that we're very happy with the improvements that we've made in those particular businesses, both in China and in Europe.
Yeah, that's fantastic. Lastly, expectations for pricing in either of those regions of the world?
Well, I wouldn't expect a whole lot of pricing improvement on the basis of the soft macroeconomic environment and some softening in commodity prices in those parts of the world. What you saw in the first quarter is not a bad proxy for what we might see going into the remainder, or at least the next quarter or two from a global perspective.
Perfect. Thank you very much, and best of luck.
Thanks, Stanley.
Thank you. We just about out of time for questions today, but just time for one final question. That is coming from the line of Shawn Williams with BB&T. Please proceed with your questions.
Hi, thanks. Just wanted to follow up and maybe dig in on the shipbuilding business a bit. Can you talk about what you're currently seeing there on a year-over-year basis? Are we flat, slightly down double digits? What is the thesis maybe, or the strategy for that business going forward? At least one of the Korean shipbuilders is talking about volumes possibly turning positive by the end of the year. I'm just wondering if are we seeing a bottoming in that business yet, or are you seeing something different?
Well, first of all, I think it's a challenging market. We certainly have seen very little growth in that space, and we've been talking about the challenges in that space. I did not pick up that comment out of Korea from the optimism they might have in the back half of the year. I do think there are two areas that we are beginning to see some improvement. Certainly one of those is in the LNG area, where, quite frankly, vessels for that application, we continue to see some activity there. I know John has just returned from Asia and saw some activity specifically with those applications. We see that portion. We also believe long-term, this is still going to be a very good space.
Although they certainly have been challenged for the last few quarters, long-term, the investment in this area we see as a very value-added sector, and we continue to invest in those areas.
I would just add, Shawn, that my visits and the things that we're hearing from our people, several of the traditional shipyards are in the process of converting those yards into other areas of activities. Because the similarities between building ships and, say, offshore activities is really surfacing. In Asia, particularly in China and Vietnam, you're seeing a lot of the shipyards convert to be able to build the offshore structures, which again, we're very bullish about. The second element, we're seeing some of the European shipyards convert to offshore wind tower production because there's going to be a big opportunity there as some of the European countries move away from the fossil fuels or the nuclear fuel activities and take advantage of the wind tower applications. We're quite optimistic that Europe is going to be very strong down the road.
I don't think it's the next six months, but in the next several years, there's going to be very large investments in those areas.
Would you mind putting it in absolute terms? Is that business down double digits for you guys right now? Is it flattish?
Shipbuilding?
Yeah, shipbuilding.
I would say it's pretty flat because it really tanked in 2009. Most of the big investment in shipbuilding just disappeared with the financial crisis. Most of what I've read is that there's excess shipping capacity in the world right now. It's not likely to be major builds other than these specialty activities like LNG that Chris talked about or somebody trying to upgrade to these new Panamax tankers where they can haul more through the expanded activity or the expanded size of the Panama Canal. I think shipbuilding is going to be very much regionally focused, and it's not going to be a great growth structure for the near term.
You can deploy those products or the assets or the resources that are devoted to shipbuilding, you can deploy those to other areas in Asia?
Yeah. Well, I think it's more our customers' ability to deploy it. If you go into a shipyard and you go into an offshore yard, they're very much the same. They're welding together heavy fabrications, and they've got large cranes, and they have seaports where they can ship these large vessels. That's where the market is moving right now.
All right. Thanks for the color, guys. That was helpful.
Thank you, Shawn.
Thank you. I will now turn the floor back to Vincent Petrella for closing comments.
Thank you, Rob. Thanks for joining us on our first quarter call of 2013. I appreciate your continued interest. We look forward to talking to you and reporting our progress after the second quarter. Goodbye.
This does conclude today's teleconference. You may now disconnect your lines at this time. Thank you for your participation.