Greetings, and welcome to Reliance Steel and Aluminum Co. 2nd Quarter 2018 Earnings Conference Call. As a reminder, this conference is being recorded. I would now like to turn the conference over to your host, Brenda Miyamoto. Thank you, operator.
Good morning and thanks to all
of you for joining our conference call to discuss our Q2 2018 financial results. I'm joined by Greg Mullins, our President and CEO Carla Lewis, our Senior Executive Vice President and CFO Jim Hoffman, our Executive Vice President and COO and Bill Sales, our Executive Vice President of Operations. A recording of this call will be posted on the Investors section of our website at investor.rsac.com. The press release and the information on this call may contain certain forward looking statements, which are based on a number of assumptions that are subject to change and involve known and unknown risks, uncertainties or other factors, which may not be under the company's control, which may cause the actual results, performance or achievement of the company to be materially different from the results, performance or other expectations implied by these forward looking statements. These factors include, but are not limited to, those factors disclosed in the company's annual report on Form 10 ks for the year ended December 31, 2017, under the caption Risk Factors and other reports filed with the Securities and Exchange Commission.
The press release and the information on this call speak only as of today's date, and the company disclaims any duty to update the information provided therein and herein. I will now turn the call over to Greg Mullins, President and CEO of Reliance.
Good morning, everyone, and thank you for joining us today to discuss our financial results. We had an outstanding Q2. Pricing momentum continued to build throughout the Q2, resulting in yet another quarter of milestone achievements, of which we are extremely proud. We generated record quarterly net sales and gross profit dollars for the 2nd consecutive quarter. Our record sales of $2,990,000,000 coupled with our strong gross profit margin of 30.7 percent produced the highest ever quarterly gross profit dollars in Reliance's history of $917,500,000 The continued strong execution by our managers in the field, supported by the positive business environment, drove record quarterly pretax income of $306,600,000 and generated the 2nd highest quarterly earnings in our company's history at $3.16 per diluted share, exceeded only by the Q4 of 2017, which included a significant benefit from tax reform.
Metal pricing environment was significantly stronger than we had anticipated, gaining strength as the Q2 progressed with prices increasing in each month of the quarter across all our major commodities. Solid demand, coupled with ongoing Section 232 activity, drove metal price increases on almost every product we sell. As a result, our average selling price per ton sold increased 9.6% compared to the Q1 of 2018, exceeding our expected range of 5% to 8% increase. Compared to the Q2 of 2017, our average selling price increased 18.1%. The favorable pricing environment in 2018 has allowed us to generate higher FIFO gross profit margins as we consistently pass through higher metal prices prior to receiving the higher cost metal into inventory.
This supported our 2nd highest FIFO gross profit margin of 32.8% achieved in the Q2 of 2018, exceeding our expectations. Prices have generally remained stable in the month of July, which we expect to continue through the Q3, with the exception of slight price increases anticipated for both carbon flat roll and plate. The demand environment remains solid throughout the Q2. Our tons sold were down 0.7% from the Q1 of 2018, within our expected range of up 1% to down 1%. We also anticipated volume pressure in the Q2 due to pre buying activity by certain of our customers in the Q1 of 2018 in response to the rapid price increases and concerns about metal availability, especially for carbon steel flat products.
Demand trends have remained strong thus far into the 3rd quarter, subject to normal seasonality associated with the customary decline in shipping volume due to customer shutdowns and vacation schedules. Through our continued effective inventory management, we achieved an inventory turn rate of 4.4x based on tons. We remain comfortable with our inventory position, which enables us to achieve an industry leading gross profit margin as well as provide just in time delivery to our customers often in 24 hours or less. In regard to capital allocation, we continue to focus our 2018 capital expenditure budget of $225,000,000 on strategic investments in equipment and facilities to drive organic growth and expand our value added processing capabilities. Our customers value our high quality products and services as well as our quick turnaround and delivery times, all of which supports our ability to increase our gross profit margin and earnings.
To support further growth, we continue to look for well run businesses that complement our diversification of products, services and geographies and or increase our value added processing capabilities. The pipeline for acquisition opportunities remains strong and we are seeing an increase in the number of opportunities in the market. As previously announced, we acquired all the outstanding stock of DeBose National Energy Services in Clinton, North Carolina and its affiliate DeBose National Energy Fasteners and Machine Parts in Cleveland, Ohio on March 1, 2018. As a reminder, the DeBose Companies specialize in global fabrication, supply and distribution of metal and metal products to the nuclear industry, including utilities, component manufacturers and contractors. So far, the De Beaux acquisitions have been accretive to our earnings and their performance has exceeded our expectations.
Returning capital to our stockholders remains a top priority for Reliance. We increased our regularly quarterly cash dividend by 11.1% in the Q1 of 2018, marking the 25th dividend increase since our 1994 IPO. We have paid regularly quarterly dividends for 59 consecutive years. While we did not repurchase any shares during the Q2, we did repurchase $50,000,000 of our common stock in the Q1 of 2018 at an average cost of $84.38 per share. We will continue to be opportunistic in our approach to stock buybacks.
In summary, we are extremely pleased with our 2nd quarter results and the significant earnings milestones our company achieved. This could not have been accomplished without the fantastic performance by our managers in the field who executed strong pricing discipline, inventory management and expense control. We generated record quarterly sales, record quarterly gross profit dollars, record quarterly pretax income and our 2nd highest quarterly earnings per share. Looking ahead, despite some continued uncertainty regarding trade actions, we are encouraged by the positive pricing momentum and continuing solid demand conditions. We remain confident in our ability to maximize our earnings power in the current environment with a focus on further increasing value to our stockholders.
I will now hand the call over to Jim to comment further on our operations and market conditions. Jim?
Thanks, Greg, and good morning, everyone. Following a record setting Q1, I would like to once again thank our folks in the field who contribute to the new records we achieved in the Q2. Thank you all for the excellent work. Now I'll discuss our outlook on certain of our key end markets as well as demand and pricing trends for our carbon steel and alloy products. Bill will then address our aluminum and stainless steel products and their related end markets.
Demand for automotive, which we service mainly through our toll processing operations in the U. S. And Mexico, continues to be very strong. We continue to grow the volume of metal processed for this market, mainly as a result of the increased demand for aluminum content in automobiles. We're also continuing to invest in our value added processing capabilities to support both carbon and aluminum processing to capitalize on this opportunity.
Demand in heavy industry, which includes railcar, truck trailer, shipbuilding, barge manufacturing, tank manufacturers and wind and transmission towers continues to strengthen. Specifically, spending on both construction and agricultural equipment increased, which we believe has been supported by tax reform as our customers respond to heightened demand for their clients who have increased their capital spending budgets. As a result, we maintain our positive outlook that demand in heavy industry will continue to improve. Demand in non residential construction market, including infrastructure, continues to steadily improve, though it still remains well below peak levels. Similar to heavy industry, we believe tax reform has contributed to the increased activity we are seeing in non residential construction.
We remain well positioned to support increased volume in our existing footprint and are optimistic that the uptick in activity in the non residential construction market will continue. Demand for the products we sell into the energy market, which is mainly oil and natural gas, continues to recover slowly for the products we sell into this end market. Rig counts and drilling activity continue to grow with mill lead times extending. Completion activity also continues to gain strength. As the overall energy market continues to improve, we remain confident in our ability to service increased demand.
Now turning to pricing. Mill pricing for carbon steel products was extremely active again during the Q2 of 2018. We were able to take advantage of multiple price increases announced for most of the carbon steel products we sell by passing on a portion of those increases to our customers before receiving the higher cost metal into inventory. Lead times also remain extended as a result of the strong demand environment and ongoing Section 232 activity. Looking ahead, we believe pricing for carbon steel products will begin to stabilize in the Q3 of 2018.
However, there is some speculation of an additional price increase on carbon flat rolled and carbon steel plate in the Q3. Before I wrap up my remarks, I'd like to also highlight improved pricing trends for alloy products during the Q2. We believe stronger overall activity in the energy market should continue to support higher alloy pricing going forward. In summary, demand and pricing remained strong throughout the Q2. Seasonal factors aside, we expect the underlying demand environment will continue will remain solid throughout the remainder of 2018 with prices leveling up.
We are very pleased with the strong momentum we experienced during the first half of the year. Thank you for your attention today. I will now hand the call over to Bill to comment on our non ferrous markets.
Bill? Thank you, Jim. Good morning, everyone. I would also like to recognize our folks in the field for their phenomenal execution throughout the Q2. Well done.
I'll now review pricing and demand for our aluminum and stainless steel products, including the key industry trends in the primary markets we sell these products into. Demand for aerospace remained strong throughout the Q2. We saw continued strength on both the commercial and defense side, with demand primarily supported by single aisle planes and increased activity from our defense customers. The backlog for orders remains robust with lead times for aluminum aerospace plate extended beyond what we saw in the Q1 of 2018. Build rates have also continued their upward trajectory since the start of the year.
Given the favorable demand environment, our outlook for the aerospace market remains positive. We look forward to continuing to grow our market share in Aerospace given our increased exposure to the defense market and our international expansion activities. The semiconductor market continued its pattern of rapid growth on a global scale. To capitalize on this growth, we have been working to grow our existing capacity in the U. S, South Korea and China to be better positioned to handle the increased demand.
Even if a slight pullback should occur, our outlook on the semiconductor market remains positive for the balance of the year. Moving on to pricing, the majority of our sales into the aerospace market consist of heat treated aluminum products, especially plate, as well as specialty stainless steel and titanium products. Demand for heat treated aluminum plate strengthened throughout the Q2. And while we are encouraged by the positive pricing momentum, we expect prices to level off in the Q3 of 2018. Most of our common alloy aluminum products are sold to sheet metal fabricators that support a variety of end markets.
Demand for common alloy aluminum sheet increased during the Q2, with lead times extending and continuing on allocation. While the Midwest spot price has come down some, the premium remains strong. We expect pricing for these products to increase in the second half based on the recently announced conversion increase of $0.15 per pound. We expect the increase to be supported in the market. As a reminder, about half of our aluminum sales are to the aerospace market, which is the one area of our business where we participate in long term contracts with fixed selling prices.
As a result, our aluminum average selling prices generally will not follow market pricing as closely as many of the other products we sell. Finally, demand for stainless steel flat products, which are primarily sold into the kitchen equipment, appliance and construction end markets, remain robust through the Q2. Our average selling price for stainless steel products also increased, mainly as a result of the ongoing price increase announcements by the mills related to Section 232 and rising input costs. We saw 2 1 percent discount reductions or price increases since our last conference call, including the recently announced July increase, which has been supported in the market. Lastly, I'd like to note that pricing for stainless steel products is heavily impacted by nickel prices, which continued to strengthen in the Q2, and we expect nickel pricing will increase modestly throughout the remainder of the year.
Thank you for your time and attention today. I'll now turn the call over to Carla to review our Q2 2018 financial results. Carla?
Thanks, Bill, and good morning, everyone. Our net sales in the Q2 of 2018 were a 2017 with our tons sold up 2.9% and our average selling price per ton sold up 18.1%. Compared to the Q1 of 2018, our net sales were up 8.4% with our tons sold down 0.7% and our average selling price up 9.6%. We achieved a strong gross profit margin of 30.7% in the Q2 of 2018, exceeding the high end of our estimated range of 27% to 29 percent and driving record quarterly gross profit dollars of $917,500,000 On a FIFO basis, our gross profit margin was 32.8%, up 400 basis points from 28.8% in the Q2 of 2017 and up 220 basis points from 30.6% in the Q1 of 2018. As we have explained previously, our gross profit margin may exceed our estimated range in periods of mill price increases as we pass through higher prices to our customers in advance of receiving the higher cost metal into inventory.
Because metal prices increased significantly more than we expected in the Q2 and we now believe prices will remain fairly stable through the Q3, we have increased our estimated full year LIFO expense to $175,000,000 from our previous estimate of $100,000,000 As a result, we recorded a LIFO inventory valuation charge or expense of $62,500,000 or $0.65 of earnings per diluted share for the Q2 of 2018 compared to $10,000,000 or $0.09 of EPS in the Q2 of 2017 $25,000,000 or $0.26 of EPS in the Q1 of 2018. Our LIFO method requires that we record 50% of our annual estimate or $87,500,000 of expense in the first half of the year. Given our current annual estimate, we expect to book $43,750,000 or $0.46 of earnings per diluted share in both the 3rd and 4th quarters of 2018. And consistent with our practice, we will continue to update our expectations quarterly based on our inventory costs and metal pricing trends. As a percentage of net sales, our 2nd quarter SG and A expenses were 17.9%, down from 19.2% in the Q2 of 2017 and down from 18.8% in the Q1 of 2018.
The reductions as a percentage of sales were primarily due to higher selling prices during the Q2, which increased our net sales. Our same store SG and A expenses were up $14,000,000 or 2.7% from the Q1 of 2018, primarily due to higher incentives resulting from our increased profitability levels and continued increases in freight costs. Pretax income in the Q2 of 2018 was a record $306,600,000 more than double our pretax income of $152,400,000 in the Q2 of 2017 and up 36.1 percent from $225,200,000 in the Q1 of 2018. And our pre tax income margin in the Q2 of 2018 was 10.3%. Our effective income tax rate for the 2nd quarter was 24.0 percent, down from 31.2% in the Q2 of 20 17, primarily due to tax reform contributing positively to our earnings and cash flow.
Net income attributable to Reliance for the Q2 of 2018 was $230,800,000 or $3.16 earnings per diluted share, the 2nd highest in our company's history. Non GAAP earnings per diluted share were a record $3.10 up 121.4 percent from $1.40 in the Q2 of 2017 and up 34.8% from $2.30 in the Q1 of 2018. Turning to our balance sheet and cash flow. As a result of our higher average selling prices and shipment levels, along with our strong gross profit margin and effective working capital management, we generated $83,700,000 in cash from operating activities during the Q2 of 2018 despite significantly higher working capital requirements. We invested $56,800,000 in capital expenditures and paid $36,100,000 in dividends to our stockholders.
At June 30, 2018, our total debt outstanding was $2,050,000,000 resulting in a net debt to total capital ratio of 27.9%. Our net debt to EBITDA multiple was 1.7x. As of the end of the second quarter, we had $760,800,000 available on our $1,500,000,000 revolving credit facility. Turning to our outlook, we are optimistic in regard to business conditions in the Q3 of 2018 and anticipate that the end markets in which we operate will continue to gradually improve. However, we anticipate that shipment levels will be impacted by normal seasonal patterns, which include a decline in shipping volumes in the Q3 due to customer shutdowns and vacation schedules.
In addition, there was one less shipping day in the Q3 of 2018 compared to the Q2 of 2018. As a result, we estimate that our tons sold will be down 2% to 4% in the Q3 of 2018 compared to the Q2 of 2018. We believe pricing fundamentals will remain steady based on current demand levels and ongoing trade action. Accordingly, we expect our average selling price per ton sold in the Q3 of 2018 will be up 1% to 3% compared to the Q2 of 2018. As mentioned previously, if metal pricing remains steady, we anticipate some downward pressure on our gross profit margin as we receive higher cost metal into our inventory.
As a result, we currently expect earnings per diluted share to be in the range of $2.65 to $2.75 for the Q3 of 2018. In closing, we are extremely pleased with our 2nd quarter financial results, which included multiple records and resulted from not only a favorable pricing environment, but also from the exceptional execution by our managers in the field. Our strong financial position enables us to continue executing on our capital allocation strategy of investing in the growth of our business and stockholder return activities. That concludes our prepared remarks. Thank you for your attention.
And at this time, we would like to open the call up to questions. Operator?
Our first question comes from the line of Seth Rosenfeld from Jefferies. Please proceed with your question.
Good morning. Thank you for taking my questions today. I have two questions just to better understand your outlook for gross margins both in the second half of this year and perhaps longer term. To start out, I mean, obviously, over recent quarters, you've had a number of times strongly outperforming your guidance range of 27%, 29%. Can you talk us through what sort of structural elements Reliance is currently enjoying that might allow you to surpass that margin range going forward?
When you think about your growth in tolling and aluminum, cyclical recovery in construction, how much could that add? And then secondly, could you perhaps talk about what impact weakening prices could have on margins? You did talk about the benefit you obviously enjoyed in Q2 from rising prices with the forward curve pointing to a year end hot oil coil price $100 below spot. Do you think that Reliance could still secure that 27% to 29% margin in that environment? Or is there risk of some downside there?
Thank you. Yes.
Good morning, Seth. So our 27% to 29% gross profit margin range is based on our current the way the company is structured today. That is based on our LIFO gross profit margin. So that came in at 30.7% for the quarter. We have said that when we're in periods of rising prices that we anticipate that we should be at the top end of that range or could exceed it, which is what happened in the Q2 of 2018.
We had pretty significant price increases during the quarter. So as we've talked about, we typically try to pass those increases on to our customers before we receive the higher cost metal in, so we get that temporary bump in our margin. So that's what occurred in the second quarter. We still think the 27% to 29% range is the right long term range for us. In weaker markets, whether it's weaker due to demand, pricing, for whatever the reasons are, we would expect to potentially be closer to the low end of that range.
From a you've questioned from a structural standpoint, how could that range change because we did bump it up to the 27% to 29%, I think at the beginning of 2017 from 25% to 27%, which is in our more historical range that we were operating in. And a lot of that, if you recall, was because we've made a lot of investments in processing equipment, in particular, to do more value add processing for our customers. So to the extent, as time goes on, if we continue to make investments, which we expect to do, at some point in the future, we could change that 27% to 29% range. But we still think for currently that's the right range for us. It's just the pricing environment, milk price environment is where we can see some upside to that.
And if prices go down, generally, we do see some tightening of the margin in periods where prices are going down. But because we do focus on inventory turnover, we think we can somewhat minimize the impact on negative impact on our gross profit margin from that.
Yes. Seth, if I could hi, this is Greg. If I could comment, our FIFO gross profit margin of 32.8%, very honestly was higher than we anticipated. We expect some pressure on that given that prices are flattening out in the Q3. But I don't think it's going to be dramatic.
So our guidance of $2.65 to $2.75 we think is realistic. And when prices if they start to trend to go down, 3rd quarter basically is already booked, okay? So I don't think if there'll be any price decreases that are going to affect anything in the 3rd quarter, We'll see what happens in the 4th quarter. But as they go down, we much the same as we try to pass the increases on before we get it into our inventory when prices are going up. We slow the process down when prices are going down, okay, as best we possibly can.
So it minimizes, okay, the impact on our gross profit margins in a declining market, but it does decline. And that's just a reality and a fact. So I hope we answered your question.
Yes. Thank you. And just one follow-up, you commented earlier about the recoveries you're seeing in the non resi construction side. I believe you noted that your existing capacity could support increased volumes without additional cost. Can you just talk us about a little bit more what scale of upside could be achieved in terms of the volume side?
And what does that mean for fixed cost leverage, please?
Yes. Hi, Seth. This is Jim. Yes, we it's just an estimate. We could handle another 20% with the investments we've made over the years in non residential construction value added processing.
We may have to add a body or 2, but our plants are set up for additional volume and our folks in the field are very good at throughput. So we'd be fine with that.
That's great. Thank you very much.
Our next question comes from the line of Phil Gibbs from KeyBanc. Please proceed with your question.
Hi, good morning.
Good morning. Good morning.
Greg, how is daily demand in July so far comparing to 2nd quarter average levels?
I think you should have
a pretty good view right now given the month is almost over. So just curious on that.
Our average daily sales are basically in line with what we saw in the Q2. So it started off a little slow because of the 4th July holidays, which is typical, okay? But as the month progressed, our average daily sales progressed with So I think that our volumes, our demand in the Q3 are going to be very similar to what we saw in the Q2, understanding and factoring in the seasonality that does take place with vacations, plant closures, that type of thing. So and we have as Carlo pointed out, we have one less shipping day, that's 63 shipping days as compared to 64 in the Q2. So that has to be considered as well.
But demand in and of itself as compared to the Q2, I think is going to be very, very similar.
Okay. And Jim, you had mentioned that alloy prices were solid and perhaps getting stronger. And you talked a little bit about energy demand as well. You made some comment to that effect. I was wondering what you were alluding to there on those fronts.
Well, I mean, just from a lead time standpoint, you see how the lead times are going out. Our domestic friends, that's a very difficult product to make. They're extremely busy. The 2 products that that goes into is automotive and energy, whether it's the lighter the smaller sizes for auto or the larger sizes for energy.
And they're
all kidding, it's not they're struggling to deal with their on time performance. It's just they just got inundated with orders. They're all busy. And especially when you get into the heat treated type products, there seems to be a bit of a bottleneck there, but we are more than confident that they're capable of improving those things. But as far as the demand is concerned, it's there.
And it continues to get better and better, seems to be weak.
I always have to remember the
S in SPQ bars means special. So it's really hard to make.
I appreciate that. And last question here is for Bill. I think Bill you had mentioned $0.15 increase I think on common alloy. Curious about how much of that would have been within the 2nd quarter and how much of that is shifting into the 3rd? And I just was surprised, it sounded like a pretty big number.
So anything you could provide on that would be helpful. Thanks.
Yes. Bill, it is a big number, the biggest increase I've ever seen in my career on common alloy. So but I think it's justified based on where lead times and demand are, seems to be getting full domestic support. And you're probably going to see that actually we'll start to see the results of that late September into October. So we're not going to see much of that in Q3.
Thank you.
Ladies and gentlemen, we have reached the end of the question and session. And I would like to turn the call back to Greg for closing remarks.
Thank you again for participating in today's call. I'd also like to thank all of our employees, customers, suppliers and stockholders for their continued support and commitment to Reliance Steel. Thanks again and have a great day.
This concludes today's conference. You may disconnect your lines at this time. Thank you for your participation.