🎁 Black Friday: 50% off Unlimited and 30% off Pro annual plans
Simpson Manufacturing Co., Inc. (SSD)
NYSE: SSD · Real-Time Price · USD
188.17
-2.08 (-1.09%)
At close: Nov 20, 2026, 4:00 PM EST
188.15
-0.02 (-0.01%)
After-hours: Nov 20, 2026, 7:30 PM EST
← View all transcripts

2026 Stephens Annual Investment Conference | NASH2026

Nov 18, 2026

Summary

Housing starts are expected to decline by low single digits in 2027, while January connector pricing will offset only part of higher steel costs. Cloud-native truss software and digital estimating are central opportunities to gain share and monetize services.

Trey Grooms
Managing Director, Stephens

Okay. We'll go ahead and get started. Good afternoon. Thanks for joining us, everybody. Next up, we're happy to have Mike Olosky, CEO of Simpson Manufacturing, and Matt Dunn, CFO. As you guys know, Simpson Manufacturing, they're headquartered in Pleasanton, California. Subsidiary, I won't go into all that. Sorry, I'm reading too much of the business description. I think people know who you are.

Mike Olosky
CEO, Simpson Manufacturing

We are a leading supplier of structural solutions.

Trey Grooms
Managing Director, Stephens

There you go.

Mike Olosky
CEO, Simpson Manufacturing

Okay. Dual headquarter, actually, in Pleasanton, California, and Plano, Texas.

Trey Grooms
Managing Director, Stephens

There you go. Appreciate that. I am Trey Grooms. I cover building products, building materials for Stephens. I guess we are just going to go ahead and kick off with some Q&A, if that works for you.

Mike Olosky
CEO, Simpson Manufacturing

Let's do it. Yeah.

Trey Grooms
Managing Director, Stephens

I do want to make sure everybody knows, if you have any questions, just raise your hand. I will try to call on you. Maybe, if you could, Mike, kind of start off by going into maybe what you guys are seeing from a demand standpoint right now for Simpson.

Mike Olosky
CEO, Simpson Manufacturing

Yeah. Simpson, leading provider of structural solutions. 50% of our business is linked to residential housing starts, so let's talk about the housing start market. You guys know the big macro story, I am sure, so I will skip that. We are looking at a fifth year in a row of declining housing starts. If you look at the numbers, through year-to-date numbers from a residential starts, down low single digits. Our view on this, from what we are hearing from the forecasters and what we are hearing from our customers, most likely it is going to get a little bit worse before it gets better. So we would anticipate the year to be down low single digits, maybe even to mid-single digits. Let's see what the numbers come out as.

When we start looking at next year, the market forecasts, the latest version that we had seen, which were now a couple of months old, they were thinking flat-ish to maybe down a little bit in 2027. We think all those will probably get adjusted a little bit lower, so we're probably looking at a 2027 housing starts in the low single digits.

Matt Dunn
CFO, Simpson Manufacturing

In a decline, yeah.

Mike Olosky
CEO, Simpson Manufacturing

Yeah. Down low single digits, yeah. That would be six years in a row of a challenging market. As a result, we're focusing on the things we can control. It's getting more content on projects, getting more innovations out there, getting more shelf space, doing everything we can to get more content per job.

Trey Grooms
Managing Director, Stephens

Very good. Maybe if you could talk a little bit about, I know you're more heavier exposed to Florida, California, some of those markets. Anything you're seeing in particular in those that stands out to you?

Mike Olosky
CEO, Simpson Manufacturing

Right. If you look at it from a Simpson perspective, we have a lot more content or structural products on a home that is in a seismic area or in high wind area. There is a lot of variability on content per jobs, and visibility to exactly what that is on a per house level is a little bit, from a gray perspective, not easy to see. We do believe in these high content areas, we could have roughly 10x the amount of content we could have in an area where the building codes are pretty straightforward, and the houses are pretty straightforward as well. If you look at, on a state level, the housing starts data, a lot of variability in that.

But if you go California-wise, the number of housing starts from the peak maybe three years ago, they are down about 18,000 units, and we have a lot of content in houses in California. We have been powering through that for the last couple of years. If you look at Florida, depends on the numbers you are looking at, housing starts could be down about 30,000 units from its peak also two, three years ago. And again, we have been powering through that for a while. So that has been a headwind that we really kind of work through. When we look at those two areas now, we are feeling they are kind of bouncing around at least a stable level. We are not necessarily seeing further decline. And again, visibility on a housing starts level in a state view, there is a lot of variability in that data.

Trey Grooms
Managing Director, Stephens

Yeah.

Mike Olosky
CEO, Simpson Manufacturing

I would say stabilized-ish would probably be the best way to say it.

Trey Grooms
Managing Director, Stephens

Okay. Can you talk, maybe step back just a little bit, and talk about the differences in You guys have a legacy business in connectors that goes back decades and decades.

Matt Dunn
CFO, Simpson Manufacturing

70th anniversary this year.

Mike Olosky
CEO, Simpson Manufacturing

70 years.

Trey Grooms
Managing Director, Stephens

70 years. Kind of talk about your market share there for those that maybe not as familiar, where you guys see opportunity on that side of your business. Also areas, like the software rollout, like the truss plates, et cetera, the newer opportunities that you guys see for Simpson.

Matt Dunn
CFO, Simpson Manufacturing

Yeah. Looking at our product, our business from a product standpoint, there is really kind of four main product lines. You have the connector product line that Trey referenced, the founder of our company, Barc Simpson, created 70 years ago. These are the structural connectors that support the structure of the home. There is no perfect Nielsen share data, but estimates 80-ish share of that market. It is about a $1.5 billion market. We have continued to grow share in that space over time and outperform starts generally over the last 10-year time horizon. We have outperformed on volume as a company about 300 basis points versus housing starts over that 10-year period. A second piece of the market that is closely related to that is truss plates in the component manufacturing space. Also roughly a $1.5 billion market. We are actually probably the third-largest player in that space.

There's a large competitor that has probably a 70 share. There's another player that has like a 15 share, and then Simpson's kind of below a 10 share. We've been growing volume in that space, upper single digits, low double digits for a number of quarters in a row, 12, 13 quarters in a row. That particular business has a software element to it, where you provide software to the component manufacturers, and then in exchange, they run on the vendor's software, and then they purchase truss plates from that vendor. It's a unique business model. We've been working on our software to have a better offering there. We launched our first-generation cloud software at the big industry show, Building Component Manufacturers Conference in September.

While we continue to pick up share on the old software, I think prospects going forward give us opportunity to continue to grow share in that space. But very underdeveloped on share compared to connectors. The third would be the fastener business. So we play in very premium, structurally load-rated fasteners. So these are things that are heavily engineered. We have 150 patents or so on our fastener business, lots of code reports, often specified. It's a big market, but if you break down the market to kind of that premium tier where we play, there's a few other competitors, and we're probably a 30-ish share in that space of kind of the premium space. So again, room to run on fasteners. And then anchors, there's really two types of anchors, mechanical anchors, so threaded rods that get embedded in concrete, as well as adhesive anchors.

Similar share position to fasteners, I would say probably in that 25, 30 share of the competitive space that we play. So, heavily developed in connectors, and then try to kind of leverage our relationships and position in that market, and the sales force that we have, and the people and engineers that we have out in the field to kind of grow those other product segments.

Trey Grooms
Managing Director, Stephens

Very good. I do want to pause and see if anybody in the audience has any questions. Okay. If we could, maybe you mentioned, you said steel, the word steel quite a few times as you went through those products. Historically, maybe could you talk about your approach to pricing relative to steel prices and costs moving up, and just overall kind of just your approach to pricing? Also, given the backdrop of what we've seen more recently with tariffs and just overall inflation, how you guys are thinking about pricing here in the more kind of near to medium term?

Mike Olosky
CEO, Simpson Manufacturing

Yep. Our solutions are typically less than 1% of the bill of materials, but critical to the structural integrity of the house, critical to the structural integrity of the deck, the pergola. We believe we are adding a lot of value for that less than 1%, so relatively small spend. We do a lot to support our customers in that space in terms of engineering, design work, testing work, validation work. We provide excellent service for them. We believe that all needs to translate into a modest premium. I would say in general, we are probably in this 10%-20% premium range from a pricing perspective. The steel story has definitely had an impact from a cost perspective.

Matt Dunn
CFO, Simpson Manufacturing

Yeah. Steel is our largest raw material input cost. Historically, we have taken pricing, I would say, in chunks when steel has changed cost significantly. Early this decade, 2021, 2022, there was quite a bit of run-up in steel, and the company passed through a fair amount of pricing behind that. Pretty quiet on the pricing front and on the steel cost front for a couple years, and then as of late last year, the tariff piece started to come in there more on fasteners and anchors that were, they are imported. We did take some pricing last year on our connector business as well as our fastener and anchor business. The way that we buy steel is a little unique. We do not do a traditional monthly contract or hedge.

We tend to buy in the market when we think the timing is right and the price is attractive. We did buy a fair amount of steel 15 months or so ago. We have been working through that over the last 15 months. We are now back in the market and have been for a couple months buying steel. That steel that we are acquiring now is up more than 60% versus the steel that was acquired 15 months ago. That is if you look at any chart you look at on the price of steel, it has gone northeast for more than 52 weeks in a row. We did announce on the earnings call a couple weeks ago, and then the letters went out this week, we are taking a price increase on connectors effective early or mid-January essentially, to try to offset some of that cost.

We are not fully offsetting that steel cost inflation from a margin standpoint. I think generally speaking, we would like to over long time horizons, but there are definitely time periods where we cannot price as much as we need to to cover our costs, recognizing there are affordability challenges in the market with homes. Generally speaking, the market is soft and people are very focused on cost, rightfully so, that homes are not affordable. So we are taking pricing in January, not fully covering that. Similar to this year, our gross margin has been slightly down this year compared to last year, but still kind of in that mid-40s range.

Trey Grooms
Managing Director, Stephens

Looking into next year, those increases that you have announced, you say not fully offsetting. Is that from a margin percentage standpoint or on a dollar-for-dollar basis, or what do you mean by that?

Matt Dunn
CFO, Simpson Manufacturing

Yeah, not fully covering on a margin percentage basis.

Trey Grooms
Managing Director, Stephens

Yeah.

Matt Dunn
CFO, Simpson Manufacturing

I mean, historically, that is generally what we have tried to do to make sure we can maintain the value proposition for our customers and continue to provide great service and expand our distribution network that we have done the last couple years. I think maybe slight haircut on gross margin percentage, at least in the short term. We will see where steel settles out, where the pricing nets out, what happens in the market, lots of variables. Not a huge departure from where we have been, but definitely not pricing to fully recover that margin percentage, at least based on what we see.

Mike Olosky
CEO, Simpson Manufacturing

Trey, we do think pricing in this affordability challenge market could result in a little bit of volume pressure on us going forward. We think eventually we will work through that, but we realize that pricing in this environment is not an easy thing to do.

Trey Grooms
Managing Director, Stephens

When you look at where you are going to market, the different channels, is that pricing going to be kind of across the board? Is it more on certain products?

Matt Dunn
CFO, Simpson Manufacturing

Yeah, in this case, we are just pricing on connectors in North America. So, we took some pretty significant pricing last year on fasteners and anchors, primarily driven by the tariffs. We saw some competitors that maybe chose not to price as much on fasteners and anchors last year, hoping the tariffs were more transitory. They have now had to come back and take some pricing. We are very cautious about the premium that we have. We do not want to be too premium, so we are choosing not to price further on fasteners and anchors with this price increase. It is really a connector-focused price increase driven by the run-up in steel costs.

Mike Olosky
CEO, Simpson Manufacturing

We have also had some carryover pricing from our activities in Europe. We have also seen significant cost increases over there. In the late summer, early fall, our European team started implementing price increases as well.

Trey Grooms
Managing Director, Stephens

Got you. Okay. You mentioned that there could be a volume impact from some of these pricing actions. You guys, as you mentioned earlier, Matt, I think you mentioned that you guys have historically outperformed the end market by 200 or 300 basis points. Do you think that derails a little bit in the near term, or how are you thinking about that relative to the market? If so, at what point do you think you kind of get back to that outperformance?

Mike Olosky
CEO, Simpson Manufacturing

If you look at Simpson over the last 10 years, from a volume perspective, we have grown roughly 300 basis points above U.S. housing starts.

Trey Grooms
Managing Director, Stephens

Yep.

Mike Olosky
CEO, Simpson Manufacturing

Lately, there has been a lot of variability in the housing starts data, particularly around multifamily. We do think probably a better correlation for our business is to single family starts. If you look at single family starts on a trailing 12-month basis, because there is a lot of variability in that as well.

Trey Grooms
Managing Director, Stephens

Right

Mike Olosky
CEO, Simpson Manufacturing

We tend to look at trailing 12 months basis. Single family starts are down 5% in the U.S., again, on a trailing 12 basis. If you look at our volume over that same period, down low single digit, 1%-ish or so. We do believe we are continuing to outperform the market. 10-year story, again, 300 basis points. Not every year is an up year. There are some fits and starts, some stops and starts in the whole process. That is normal. As we pick up a couple of customers, we launch new products, there are various shifts in the market. We do believe on a long-term basis, we will continue to drive above market growth, and we certainly want to beat that historical average that we have done over the last 10 years.

Trey Grooms
Managing Director, Stephens

You mentioned the, just briefly, we talked about the software rollout. That is something new for you guys. This most recent version kind of, I guess, fills out your tech stack. Maybe if you could touch on that a little bit deeper. Then also, as we were talking about kind of that market outperformance, the opportunity that opens up for you on the truss side.

Matt Dunn
CFO, Simpson Manufacturing

Sure. We talked a little bit about component manufacturing and truss plates when we talked earlier about the key products and the market size. It's roughly about a $1.5 billion market, we believe, on truss plates. Again, we're less than a 10% share. That business model's pretty unique. It requires that software we talked about. Simpson's had software in this space for a number of years. Frankly, our software worked pretty well for the small and medium-sized component manufacturers, and we'd done a good job growing share in that space and providing alternative to the two competitors there. With this latest generation of software that we launched a couple months ago, we believe it unlocks to go after some of the larger players in that space.

We've had one of the top 10 truss manufacturers has been on Simpson software for a little over three years now. So, we've got a proven track record with one of the top 10 and then lots of other small and medium-sized. Certainly, we've been growing share and growing volume in that space for a number of quarters in a row. Particularly on the software, there's really three legs to the software that is provided to these component manufacturers. There's a piece of software that runs the equipment in the site. In our lingo, that's called Producer, and we launched Producer on the cloud in the summer of 2025. Since then, we've seen customers onboard to that piece of software, and we've been able to do a number of sort of in-flight upgrades as we got feedback on it.

Because it's on the cloud, we're able to launch upgrades and different features and things very quickly rather than being an on-prem solution like some of our competitors have that makes that very challenging. That's been very well received. It's been in market 15 months or so now. There's a second piece of software, which is a software that's essentially like a mini CRM for the component manufacturer, so it manages which package they're going to make at which site on what time. In our language, that's called Director. We launched Director on the cloud in August of this year. So early days, but good feedback. The last piece of software is the truss design software that actually does all the engineering calculations for the truss designers. Historically, our software kind of had three components to it.

It had a piece of software that designed roof trusses, a piece of software that designed wall panels, and a piece of software that designed floor EWP systems. That was a bit of the clunkiness of our software, is it wasn't quite integrated. Think of it as like three separate apps. With this latest generation we launched in the cloud in September, we've now got one continuous load path of engineering from roofs, walls, and floors, which is a key component of what some of the bigger players need. The bigger players in that space, we know them already as customers. We sell them connectors, fasteners, and anchors. There are a lot of the big players that you would expect in that space.

We think this unlocks the opportunity to go after some of the bigger players in that space and pick up some more share over time. Again, we have been onboarding customers to our existing software. We are a little bit in this, almost like an iPhone upgrade type cycle, where you have got people that had been evaluating the existing software, and now the new software comes out, so they are like, "All right, let me make sure I am picking the right option," and then go forward and convert from there. Again, very, I think, optimistic and bullish about our opportunity in that space. A $1.5 billion market, less than a 10% share. Roughly every point of share is about $15 million in revenue for the company. So, meaningful opportunity.

Mike Olosky
CEO, Simpson Manufacturing

Trey, let me emphasize the on the cloud part that Matt talked about. This is the only system for component manufacturing that is designed specifically to be run on the cloud. There are some inherent advantages. We heard Matt touch a little bit on our ability to implement upgrades and maintain it and bug fixes significantly faster than somebody like, well, previously we were all on-prem, and our competitor is on-prem at 1,000 + different locations. So to run those upgrade, to run those bug fixes, to try to improve the product, there is a lot of tech debt issues you need to work through.

We also believe that having a system that is designed to be native to the cloud, we can further integrate AI capabilities into it to automate the truss design process and bring other features and functionalities that will help our customers run their business, all at a really quick rate. Again, just because of the way it is architected to be specifically for the cloud, and again, the only system for the component manufacturing space designed on the cloud.

Trey Grooms
Managing Director, Stephens

Got it. Well, thanks for all that. I guess maybe shifting gears a little bit, we talked about gross margin, but you guys have been optimizing your OpEx. You have done a good job of seeing some leverage there. I know you have right-sized in some places where needed. So how should we be thinking about that SG&A or operating expense leverage as we are looking through the next, I guess maybe medium term?

Mike Olosky
CEO, Simpson Manufacturing

Yeah. It starts with one of our three financial ambitions. We believe this is a 20% operating income business, even in a flat market. We have talked about that for a couple of years. We had the kind of statement of where we think to get to 20%, we need to have a little bit of volume growth, which certainly would have helped, but in this market, it is not going to help us get there. Matt will talk about some things we did to help get the OpEx in the right range. We believe we have got a very strong market position. We have got a very strong brand. We have got a very, very strong business model, and that needs to translate into strong operating income results. We believe that 20% operating income level is the right way to run the business.

Matt Dunn
CFO, Simpson Manufacturing

Yeah. We were in a period there for a number of years where we were expecting the market to grow. Next year is going to be better, the market is going to grow. I think the company was continuing to invest in OpEx, and frankly, got a little bit ahead of our skis. About this, or a little earlier than this last year, so Q3 last year, we did some restructuring and took out some costs. This year, we are going to end OpEx at least $10 million down versus the dollars we spent last year. An absolute dollar reduction after a number of years of, frankly, outpacing revenue with OpEx growth. I think going forward, we are continuing to manage it pretty cautiously, and we have stated that the goal is to grow OpEx no more than half the rate of our revenue growth.

Continue to get some of that leverage or cost.

Trey Grooms
Managing Director, Stephens

Got it. Anybody else have anything? Yes.

Mike Olosky
CEO, Simpson Manufacturing

Correct. We are already hearing that. That whole industry had pretty much run with software on-premises. That means different configurations, different customizations, and that gets to be pretty complicated when you are talking about our competitors having 1,000 + sites that are on that system. Again, we see that we have a much smaller footprint than they do, so we already see that complexity. What we understand is our competitors have pretty much taken the old system, just moved it as it is designed and architected onto AWS. As a result of it not being optimized specifically for the cloud, there are some latency issues, there are some speed issues that they are working through, and we have heard that from a couple of customers.

That is why we think having a system really designed from the bottom up to be on the cloud is going to give us a long-term competitive advantage. The pricing, and Matt touched a little bit on the business model. You give them these software tools to run their business. In exchange for that, you pay an elevated price for the steel truss plates that are used to connect the timber for the truss systems. If you look at our competitors, they do have pretty high pricing for the products, especially the medium size and the smaller players. We do think there is plenty of room for us to be also competitive in the pricing, resulting in a pretty good gross margin for those products. Let me start from a European perspective. No plans now.

I think if you look at the European market, we do think that there are some opportunities for that market to grow, because they do have more immigration in Europe than we have in the U.S. That leads to family formation. Hopefully, we get a little better tailwind. But at the same time, the market in Europe runs at a structurally lower profitability level. So, no plans to Europe. They would have to really It would have to be an unbelievable deal, borderline give it to us, for us to really consider that. If you look at the realm of possibilities for us to leverage large acquisitions in the core business, there are only a handful of players that are above the $100 million space. If somebody decided to cut out a division or sell a particular product line, we would be certainly interested.

We think the material space, because we do do adhesives, we think the material space, there could be some interesting opportunities. But again, a handful of companies over $100 million, all of them not actionable. We are watching, we are tracking, we are trying to keep in touch. If that happens, great. There is zero plans to really move into an adjacency. The idea being a diversified supplier of structural steel into the industrial market, we are not interested. The idea of being a broad supplier of the various types of solutions in the building construction industry, different than our core, we are not interested in. We want to focus on the core business. We think we are $2.4 billion in a $10-ish billion TAM.

We think there's plenty of opportunity for us to grow our markets there, make the connector market bigger by introducing new products and just making the pie bigger, by taking share in the fastener and anchor spot, by leveraging digital solutions to try to drive more content, to try to monetize the software and services. We're focused on the things that we do best, and we think that's the best way to run the company. At least for Matt. Good question.

Matt Dunn
CFO, Simpson Manufacturing

I think that's part of the reason why we announced kind of the larger, untime-bound buyback program in the last earnings call, $1 billion , which is a departure from how we've chosen to communicate in the past, where we very much did a year-to-year buyback. We want to preserve optionality on M&A, for examples like Mike described, if one of those handful of companies becomes available. But I think in the interim, you're going to continue to see us return cash to shareholders, maybe at an accelerated rate, but we wanted to have that flexibility to kind of manage that across years. In years where M&A is not actionable, probably going to see an increased buyback. It's a cyclical business, so we don't really want to get into a significantly leveraged situation.

I think for the right M&A, if we found one that was on the larger side, we'd consider it. But generally, we don't have a target to be leveraged for the sake of leverage, so.

Trey Grooms
Managing Director, Stephens

Well, in the interest of time, if there's no more questions from the audience, is there anything that we didn't talk about or that you'd like to leave us with?

Mike Olosky
CEO, Simpson Manufacturing

Yeah. I think that, when we touched on this a little bit, the digital solution space for our industry, we think is a pretty interesting story. The building construction space from a productivity perspective is, and when you compare it versus other industries, always have been a bit of a laggard. The adoption of technology, we believe, is one reason behind that. There is a lot of momentum around estimating and trying to automate the estimating process. If you know the industry, the way it works today is there's a 2D version of a drawing that a builder or architect designs. It's not really engineered. They don't really understand the true cost of that.

To take that 2D drawing, convert that into a 3D drawing, to do some of the engineering around it, and then create kind of an actionable list of bill of materials on it, there's some opportunity there. If you look at some of the bigger builders, they look at that as an opportunity to squeeze basically everybody else, the wood suppliers. We can do tile counts, sheeting counts, the structural counts. They could use that as an opportunity to squeeze their suppliers to drive down cost. If you look at it from a lumberyard perspective, there's an opportunity for them to provide a more accurate quote and maybe get some business based off of price. At the end of the day, they don't have 20 fudge factors that they need to worry about, so they can be more competitive.

From a Simpson perspective, we think that's a service that we can monetize, so either a subscription or a per-design fee. We also think that those estimating tools can help us drive more content per job. We can call out the right connector package, but we can also call out where we can use more fasteners and anchors on the job, get them into that bill of materials. We believe our fundamental understanding of the building code, how to frame a house to that building code, and all the engineering around it, gives us a unique perspective in how to provide that estimate and all the engineering around it. We think there's some opportunity to leverage it, and also, at the same time, make our business model a little bit more sticky.

Trey Grooms
Managing Director, Stephens

Very good. Well, thank you for your time. Really appreciate it. Thanks, everybody, for joining us.

Mike Olosky
CEO, Simpson Manufacturing

Thanks, Trey.

Trey Grooms
Managing Director, Stephens

Thank you.