Welcome to the fourth quarter and fiscal year 2019 Stanley Black & Decker earnings conference call. My name is Shannon, and I will be your operator for today's call. At this time, all participants are in a listen-only mode. Later, we will conduct a question and answer session. Please note that this conference is being recorded. I will now turn the call over to the Vice President of Investor Relations, Dennis Lange. Mr. Lange, you may begin.
Thank you, Shannon. Good morning, everyone, and thanks for joining us for Stanley Black & Decker's fourth quarter and full year 2019 conference call. On the call, in addition to myself, is Jim Loree, President and CEO; Don Allan, Executive Vice President and CFO; and Jeff Ansell, Executive Vice President and President of Global Tools and Storage. Our earnings release, which was issued earlier this morning, and a supplemental presentation, which we will refer to during the call, are available on the IR section of our website. A replay of this morning's call will also be available beginning at 11:00 A.M. today. The replay number and the access code are in our press release. This morning, Jim, Don, and Jeff will review our fourth quarter and full year 2019 results and various other matters, followed by a Q&A session.
Consistent with prior calls, we're going to be sticking with one question per caller. As we normally do, we will be making some forward-looking statements during the call. Such statements are based on assumptions of future events that may or may not prove to be accurate. As such, they involve risk and uncertainty. It's therefore possible that the actual results may materially differ from any forward-looking statements that we might make today. We direct you to the cautionary statements in the 8-K that we filed with our press release and in our most recent 34 Act filing. I'll now turn the call over to our President and CEO, Jim Loree.
Thank you, Dennis, and good morning, everyone. As you saw in this morning's press release, we successfully closed out the year with an in-line four Q performance. Quarterly revenue was up 2% to $3.7 billion, with organic growth of 2% amidst a mixed global macro. Our total company adjusted operating margin rate was 13.6%, up 30 basis points year-over-year, and adjusted EPS for the quarter was $2.18, up 3%. Full year revenues were $14.4 billion, up 3%, with a solid 3% organic growth performance. Our operating margin rate was quite resilient at 13.5%, just 10 basis points under last year, despite absorbing $445 million of external pre-tax headwinds from tariffs, FX, and the like, a significant portion of which were not and could not have been anticipated at the beginning of the year.
Adjusted EPS for the year was $8.40, a 3% increase versus 2018, a notable accomplishment under the circumstances. Finally, we were thrilled to deliver $1.1 billion of free cash flow for a conversion rate of 113% and a SROI of 14%. Working capital turns improved to 9.8 turns, up a whole turn versus prior year. This strong cash performance helped us support our growing dividend and enabled us to finish up the year with a balance sheet in great shape, with a debt to EBITDA of approximately 2.0 x while absorbing $900 million of capital allocation to M&A in 2019. In this regard, we closed on two previously announced transactions during 2019. First, our 20% minority partnership with MTD provides a path to enter the $20+ billion outdoor power equipment market with an industry leader in a financially prudent way.
Beginning in July 2021, we have an option to purchase the remaining 80% of MTD, with the potential to add approximately $3 billion of revenue at an all-in EBITDA multiple in the range of seven to eight times. This option remains in place for 10 years, giving us maximum flexibility to enter the market at an appropriate time of our choice. We also closed on the acquisition of IES Attachments, a leading provider of off-highway specialized attachments for prime moving equipment, doing business under the Paladin and Pengo brand names. This transaction almost triples the size of our infrastructure business unit while further diversifying our presence in the industrial markets. The business features high profitability, good growth, and is heavily weighted to the aftermarket, which represents approximately 60% of revenues.
In addition, today, we announced that we have reached an agreement to acquire Consolidated Aerospace Manufacturing, or CAM, which gives us an exciting platform for growth in the aerospace components and fasteners market. I'll provide a bit more color on that in just a moment. Another highlight from 2019 was the progress made by our security business. 4 Q was a significant step forward in the turnaround as we generated our best security organic growth in recollection at 4%, with all major regions and businesses contributing. North America electronic security was up 10%, a very encouraging indication of the power of our new business model. Security also demonstrated its ability to accrete its operating margin rate, which was up 20 basis points for the year.
We appear to be at an inflection point, with increasing positive momentum in organic growth and a stable operating margin rate poised for accretion in 2020. As for the future of security in our portfolio, we look forward to providing you with a mid-year update, as promised. However, we are confident in the value we are creating through this transformation, regardless of whether we choose to retain or to monetize the asset at some point. Looking back at 2019, a lot of progress was made against a volatile, uncertain backdrop of tariffs and other external headwinds. Despite the $445 million of pressures, we more than held serve with our financial performance.
We continued to execute on our growth catalysts, including FLEXVOLT, CRAFTSMAN, e-commerce, DEWALT ATOMIC and EXTREME, and acquisitions. We continue to enthusiastically embrace the growing importance of ESG and multi-stakeholder capitalism, recognizing the power of purpose-driven performance and the importance of diversity and inclusion to the success of the corporation. Our 60,000 employees, our board members, and the many business partners in our ecosystem gave it their all, and we emerged well-positioned to tackle the challenges and opportunities of the 2020s. I want to personally thank each and every one of them for their contributions. Our performance this year was no small accomplishment, and I am very appreciative. With that said, I want to move to another development that we announced today. As indicated in our release, today, we're sharing plans for a leadership succession in our tools and storage business.
After 20 years with the company, Jeff Ansell has made the personal decision to step back from his responsibilities as President of tools and storage and take a less intensive role in our organization. We're pleased that we are able to share a seamless transition plan today with Jaime Ramirez, currently Senior Vice President and Chief Operating Officer of tools and storage, assuming leadership responsibility for the entire unit over the course of the first half of 2020. Jeff has been an incredible colleague, teammate, and leader of tools and storage for 15 years now. In fact, over the last two decades, few have contributed more to the growth and success of this company than Jeff.
He was integral to the historic Stanley Black & Decker integration that created enormous growth for the company, and during his tenure leading tools, that unit grew from a $600 million revenue hand tool business to a $10.1 billion industry leader. His passion for customers, brands, products, and innovation is truly remarkable. Even with that track record and all those accomplishments, we were supportive when Jeff approached us about his interest in making this change. We are grateful for his many years of dedication and high performance, but also completely respect his desire to spend more time on personal and family endeavors. Further, we appreciate his willingness to remain a major contributor to the company's success in the coming years.
Effective July 1st, he will transition his current operating responsibilities to Jaime and will assume the leadership of a major and exciting organic growth program involving the revitalization of the Black & Decker brand. He will continue in this role through the end of 2021, and at that point, will stay on as a strategic advisor to the company through the end of 2023. As I mentioned, Jaime will assume full leadership of the business by mid-year. He's a 27-year veteran of Stanley Black & Decker, cutting his teeth in the emerging markets. The agility, adaptability, and drive to win necessary to succeed in those high-growth, volatile markets will serve him well. In addition to his strong and proven execution skills, Jaime is a champion of innovation, technology, and digital transformation with a socially responsible approach.
We are confident that he is the right leader to take Tools and Storage into the future, and he will bring that transformative focus, along with his passion for the business, to the role. We look forward to you spending more time with Jaime in the months ahead and the years to come. On behalf of the board and our entire management team, I want to extend our heartfelt appreciation to Jeff for all his contributions and impact in leading our tools business to become the largest, most innovative, and most trusted tools franchise in the world. Now I'll turn it over to Jeff to make a few remarks.
Jim, thank you for the kind words. It is with tremendous pride that after more than a quarter of a century in this company and a decade and a half leading the tools business, I share with you my decision to transition my responsibilities. 15 years ago, I set out to establish our tool business as the biggest and best in the world. That mission has more than been accomplished. At this point, I want to share more time with my wife and children as they so willingly shared me all these years. This transition allows me to do just that and at the same time remain professionally connected to the company that I love through 2023. A great deal has been accomplished in the past 15 years by the tools and storage team and me.
While I'm in transition, the team that remains has delivered incredible results, including increasing the size and profitability of the tools business by more than 17 times, making us the world's largest tool company, developing over 10,000 new products, and growing our flagship brands to their largest sizes in history, including Stanley Black & Decker, IRWIN, LENOX, CRAFTSMAN, and DEWALT. I leave the tools business in excellent care. The management team is the absolute best in our industry, and I've known and worked alongside Jaime Ramirez for more than a decade. His long tenure and successful track record in this wonderful company have prepared him well for this role.
Our strength in every major geography in the world and our unparalleled stable of brands, combined with our robust pipeline of innovation as well as pervasive faith in Jim, Don, and our entire management team instills tremendous confidence in me that this organization's best days are ahead. I will always be indebted to our customers and employees for making all this possible. With this, I turn the call back to Jim.
Thank you, Jeff. It's been a great journey and not over yet. Before I turn it over to Don Allan, I just wanted to cover a little more detail on CAM. Growing and diversifying our industrial business through M&A is a priority for the company and a key element of our strategic capital deployment. Our vision presented at our 2019 Investor Day is to create a three to $4 billion global industrial platform that is made up of highly engineered application-based solutions.
We are looking for businesses that have the attributes you see on the left side of this slide: strong engineering capabilities with technology that is industry-leading, customer-recognized and trusted brands, and a recurring revenue component or a heavily weighted aftermarket element. Additionally, we want businesses that are global in scale, can differentiate through innovation, and operate in strong end markets, and have the potential for robust growth over the long term. Consistent with this strategy, we are very excited about today's announcement of the CAM acquisition. CAM is a leading manufacturer of specialty fasteners and components for the aerospace and defense end market. This acquisition is an ideal bolt-on to our existing engineered fastening business, and further adds to our industrial portfolio in a new high-growth, high-margin market.
The transaction is valued at up to $1.5 billion, with $200 million held back, and contingent upon the 737 MAX receiving timely FAA authorization to return to service, and Boeing achieving certain production levels. When adjusted for approximately $185 million net present value of expected cash tax benefits, the net transaction value is approximately $1.1 billion-$1.3 billion. CAM has LTM revenues of approximately $375 million and attractive profitability characteristics. This business has strong brands, a proven business model, deep customer relationships, and an experienced management team, which will create a pathway for profitable growth and value creation. Given the favorable characteristics of the asset, the year five cash flow returns are within our 12%-15% target and is expected to add $0.30-$0.40 of EPS accretion by year three.
This acquisition of CAM also gives us a platform asset in aerospace to add on future bolt-on acquisitions. The transaction is subject to customary closing conditions, we're excited to welcome CAM and its 1,600 employees to the Stanley Black & Decker family as soon as possible, and are ready to get to work on the integration and synergy plan once closed. As you take a step back to look at what we've accomplished in industrial over the past three years, it is notable that the acquisitions of Nelson, IES Attachments, and CAM align closely with our strategy and have increased our exposure to new end markets while diversifying our industrial portfolio beyond automotive OEM. These three high-quality assets in the aggregate represent approximately $1 billion in revenue and $2.6 billion in strategic capital allocation.
Each carry strong prospects for revenue and profit growth, as well as compelling cash flow returns and EPS accretion. Now I will turn it over to Don Allan to cover the fourth quarter and our 2020 guidance.
Thank you, Jim. Good morning, everyone. I would also like to express my gratitude to Jeff Ansell and let him know how much I enjoyed working with you for over 20 years. We worked together to drive our company forward operationally. I will miss having you in those moments going forward, but I am so excited for you in the next stage of your SBD journey. Thank you, Jeff, for being an amazing leader through this wonderful transformation of Tools and Storage. I will take a deeper dive into our business segment results for the fourth quarter. Tools and Storage delivered 1% total revenue growth, with 2% organic growth, and a one point headwind from currency. Price was modestly positive in the quarter, but slightly below our expectation.
We saw our promotional mix increase in North America, which partially offset the continued pricing benefits we are receiving across the global business. The operating margin rate for the segment was 16.5%, up 110 basis points versus prior year. The benefits of significant margin resiliency actions taken, volume, and price were partially offset by tariff and currency headwinds, as well as unfavorable product mix and plant under-absorption related to significant inventory reductions. Total tariff and currency headwinds amounted to approximately $85 million for the entire company, with 95% impacting tools and storage. The unfavorable product mix was caused by reduced levels of hand tools, accessories, and storage revenue versus the prior year, which of course has higher levels of profitability, combined with the increased promotional activities in the power tools SBU.
We took the opportunity within the quarter to begin to normalize our inventory levels following the completion of the CRAFTSMAN rollout and other various brand transitions we have been executing across the marketplace. This effort resulted in a very strong cash flow performance, but the lower production volumes created a non-recurring P&L headwind that we were able to overcome. These last two areas of operational pressures, combined with lower-than-expected volumes, emerged during the quarter and drove a negative impact on our segment operating margin. However, we were mostly able to offset that with significant margin resiliency actions. On a geographic basis, North America was up 3% organically. U.S. retail continued to see strong momentum with mid-single-digit growth in the quarter. The U.S. commercial channel posted low single-digit growth, while the industrial-focused product lines and automotive repair channel were both down high single digits.
We believe there was some ongoing customer inventory corrections that occurred during the quarter, which constricted our shipment growth in this particular area. This is the second consecutive full quarter we have experienced this negative impact in the channel. North America's growth continued to be fueled by our brand rollouts, including CRAFTSMAN and new product innovations such as DEWALT, FLEXVOLT, ATOMIC, and EXTREME. The sell-through continued to be robust across North American retail, with the fourth quarter once again delivering double-digit POS, resulting in a double-digit performance for the full year as well. It is rewarding to see these growth catalysts generating such a positive response from our end users and delivering such a strong performance once again. Europe delivered 3% organic growth in the quarter, with seven out of the 10 markets growing organically.
This performance was led by the U.K., France, Central Europe, Greece, and Iberia. Which more than offset weaker markets in Italy and the Nordics. The team once again leveraged our strong portfolio of new products and commercial actions to produce above-market organic growth. Finally, emerging markets declined 3% organically. Weaker market conditions within Latin America more than offset the benefits from price, new product launches, and e-commerce expansion. The Latin American market pressure was most acute in Chile, Mexico, and Central America, which in some cases, you are seeing the political environment or social disruption beginning to impact the business confidence and the underlying GDP. We saw strong performances in Brazil, India, and China, which posted mid-single-digit growth, while Russia, Turkey, and Korea all posted strong double-digit growth. Now let's take a look at the tools and storage SBUs.
Power tools and equipment delivered 6% organic growth, benefiting from strong commercial execution and new product introductions. User response to our new innovations within FLEXVOLT, ATOMIC, and EXTREME has been very positive and continues to translate into share gains for us and our customers. Hand tools, accessories, and storage declined 3% as new product introductions were more than offset by the aforementioned customer inventory corrections and the shift to more promotional items such as power tools. In addition, the CRAFTSMAN comps are getting more difficult, and this will cause a temporary pressure to organic growth for a few quarters. In summary, a strong quarter and incredibly successful year for tools and storage, generating mid-single-digit organic growth and an OM rate expansion despite taking on most of the $445 million of externally driven cost headwinds that came our way in 2019.
An incredibly impressive performance by the team, which continues to be resilient and act with agility to position the business for future growth and margin expansion in 2020 and beyond. Turning to industrial, this segment delivered 9% total revenue growth, which included 13 points of growth from the IES acquisition, partially offset by a four-point decline in volume. Operating margin rate increased 40 basis points year-over-year to 13.6% as productivity gains and cost control more than offset the impact from lower volume and externally driven cost inflation. Our engineering fastening revenues were flat organically as higher system shipments and fastener penetration gains were offset by inventory reductions and lower production levels within industrial and automotive customers. Our industrial end markets remain challenged due to ongoing inventory reductions and slowing trends across these particular areas.
However, despite underlying automotive production declining for a sixth consecutive quarter, our auto fastener business continued to benefit from penetration gains, outgrowing global production by 410 basis points. The infrastructure businesses declined 17% organically as volumes were impacted by challenging oil and gas pipeline and scrap steel markets. Let's turn to security. I am pleased to report we delivered 4% organic growth, marking the second consecutive quarter of positive organic growth. North America was up 7% organically, driven by increased installations within commercial electronic security and higher volumes in healthcare and automatic doors. A very impressive performance in North America. Europe hosted 1% organic growth led by France and Sweden, which was partially offset by continued market weakness in the U.K.
In terms of profitability, the segment operating margin rate was 11.2%, down 80 basis points versus the prior year, as organic growth and cost containment were more than offset by the impact from the Sargent and Greenleaf divestiture and investments to support organic growth. The investments are significant and will begin to pay dividends in 2020, as the 2019 revenue impact was modest but building momentum. Without the impact of these two items, Security would have experienced significant margin rate expansion. It was encouraging to see Security organic growth accelerate in the fourth quarter, and we expect the top-line momentum to continue into 2020. The business will look to balance organic growth and OM rate expansion on a consistent basis as we leverage our targeted investments in commercial electronic security.
We feel the business is well positioned for success, which is low single-digit organic growth with consistent operating margin dollar and rates expansion. Let's take a look at our free cash flow performance on the next page. As you can see, our free cash flow for the full year was excellent as we generated approximately $1.1 billion in 2019, up $312 million year-over-year, and a free cash flow conversion of 113% of our net income. The improvement was due to higher cash from operations driven by our working capital improvements, as well as modestly lower capital expenditures. As it relates to working capital, we delivered 9.8 working capital turns, up one turn year-over-year. As I mentioned earlier, we made the decision in the fourth quarter to reduce inventory levels within our tools and storage business as the heavy lifting from our brand transitions are complete.
As we look ahead, we still see opportunities to improve working capital back above 10 turns in the coming years. We are very pleased with this result. As many of you know, we have been very focused on getting our annual free cash flow back above $1 billion. Now that we've completed these significant brand transitions, we were able to achieve that objective in 2019. Let's move to the 2020 guidance on slide eight. We are expecting an adjusted EPS range of $8.80-$9.00, up approximately 6% versus prior year at the midpoint. On a GAAP basis, we expect the EPS range to be $8.05-$8.35, inclusive of various one-time charges related to restructuring, M&A costs, as well as the security business transformation and key margin resiliency initiatives. As a reminder, this guidance does not include the impact of the CAM acquisition.
In addition, we expect the free cash flow conversion will approximate 90%-100% in 2020. Let's turn to some of the drivers of core EPS growth, as you see on the left-hand side of the chart. We expect approximately 3% organic growth, which will generate $0.40-$0.50 of EPS accretion. The actions associated with our cost reduction program announced in October are broadly complete and expected to deliver approximately $0.95 of EPS. These items will be partially offset by $0.60-$0.70 of carryover tariff and currency headwinds. Finally, below OM, we expect a net $0.25 EPS headwind year-over-year. This includes a tax rate of approximately 18%, which is up two points year-over-year, as certain benefits experienced in 2019 will not repeat at the same levels in 2020.
Additionally, we are seeing about $0.05 of net headwind, which includes share pressure related to previous financing activities, partially offset by favorable interest expense. Just to clarify our tariff assumption, we are assuming the benefit within our guidance from the recently announced trade deal. This means List 4A is at 7.5% beginning in the middle of February, and Lists 1, 2, 3 remain in place at 25% rate. This resulted in a net benefit of about $0.10 in our guidance, which includes a reduction in our tariff expectation as well as lower-than-expected pricing benefits. As it relates to pricing, we have benefits built into the plan across all our businesses, but since the tariff environment has deescalated for the time being, much of the new 2020 pricing we achieve will be generated by executing margin resiliency actions. Let's turn to margin resiliency.
We are now in full execution mode and expect to generate $300 million-$500 million of cumulative benefits from this program over the next three years. As a reminder, the margin resiliency program is generating accelerated productivity by applying technology to our manufacturing and procurement processes, as well as our back office. This was developed as a response to the dynamic nature of the external operating environment, which we now view as our new reality. As such, we are leveraging the program as additional contingency to offset any incremental headwinds or market dislocations that may come our way throughout the year. Should the external environment stabilize, or in the event we start to see some tailwinds, we will leverage this program as an opportunity to outperform our guidance or reinvest into our businesses. I would now like to review our expectation for the next quarter.
We expect first quarter's earnings to be approximately 14% of the full-year performance, which is about 300 basis points lower than last year. The first factor driving this lower percentage of full-year delivery is that we expect a little more than half of the $115 million of full-year external headwinds to impact the first quarter. Next, we will anticipate organic growth to be relatively flat in the first quarter. We are planning for the global industrial environment to continue to be choppy, and we are facing more difficult comps in Tools due to the CRAFTSMAN rollout. While we expect CRAFTSMAN to still deliver about two points of growth within the Tools and Storage segment in 2020, the first quarter discreetly is one of the toughest comparisons for the load-in, which started to intensify in the first quarter of 2019.
These two factors represent approximately two-thirds of the reduced first quarter contribution, resulting in a relatively consistent operating margin rate and dollars versus last year. The remaining one-third of the first quarter difference is related to higher-than-expected tax rate and the impact from consolidating MTD's full winter season. Now we're going to turn to the segment outlook on the right side of the page. Organic growth within tools and storage is expected to be at mid-single digits in 2020. There are multiple catalysts supporting growth, including core innovation, benefits from our breakthroughs such as FLEXVOLT, ATOMIC, and EXTREME, e-commerce, and the continued contribution from the brand transitions with CRAFTSMAN, STANLEY, and STANLEY FATMAX. Margin rates are expected to be positive year-over-year as we realize the benefits from volume, our cost actions, and productivity, which will more than offset the carryover impact from the external headwinds.
In the industrial segment, we expect a relatively flat to modestly negative organic performance. This outlook reflects the current slow market conditions within the automotive and industrial end markets, as well as the oil and gas pipeline and attachment tool markets. Our expectation is that the front half will continue to carry similar market pressures as what we saw in the back half of 2019. Once we get to the second half, we do see the opportunity for better performance and potentially modest growth as the comp sees. Operating margins in this segment are expected to be positive year-over-year, as productivity and cost actions are partially offset by modest tariffs and currency headwinds. Finally, in the security segment, we are expecting organic growth to be up low single digits in 2020.
With the investments we have made over the past year, the team has positioned the business for a more consistent top-line performance. This is expected to translate into improved operating margins year-over-year as we leverage volume and deliver on our focused initiatives to lower our cost to serve. One last matter as it relates to guidance. With the recent virus outbreak in China, we are anticipating some questions as it relates to our manufacturing footprint. Most of our major facilities and suppliers are not located in the affected area. Our largest tools and engineering fastening facilities are located in the broader Shanghai area. We also have plants that are in mainland China, adjacent to Hong Kong and Macau, as well as a plant along the eastern coast. We are staying close to the situation, and the team is working through contingencies for manufacturing and for our supply base.
With what we know thus far about the one-week extended shutdown for Chinese New Year, we feel this is an impact that is contemplated in our guidance. Of course, this is a very dynamic situation, and our teams will react and respond as conditions change, and we will update you as we know more throughout the quarter. In summary, for our total company, we expect a 3% organic growth, 5%-7% adjusted EPS expansion, inclusive of a two-point tax headwind. A solid result and a balanced view that focuses on delivering margin expansion by realizing the benefits of our cost actions and generating volume leverage to successfully overcome the carryover impacts from tariffs and currency. We believe we are taking the appropriate actions to position the company for success in 2020.
The organization is focused on leveraging our organic growth catalyst, executing margin resiliency, generating strong free cash flow, and successfully integrating the CAM and IES acquisitions. With that, I would like to turn the call back over to Jim to close out with a summary of our prepared remarks.
Thanks, Don. One last look at 2019. It was a successful year considering the environment. The performance was possible due to the agility, passion, and dedication of our workforce, and I thank our people for their commitment. It's their extraordinary dedication, passion, teamwork, and sheer will to win that makes this company so special. Our teams acted with speed and determination while facing into $445 million currency, commodity, and tariff headwinds, as well as very dynamic end markets. We delivered 3% total revenue growth, including 3% organic growth, and our OM rate remains strong at 13.5%, and adjusted EPS expanded by 3%. In a really positive note, free cash flow was $1.1 billion, with very strong conversion and similarly consistent with our long-term financial objectives.
As we turn to 2020, our leadership team will act with agility, leveraging our proven ever-evolving operating system to successfully navigate the underlying external environment. Additionally, we're continuing to execute on our margin resiliency initiative, $300 million-$500 million over several years to get our margins back on an upward trajectory, despite whatever headwinds might appear on the horizon. We're looking forward to another successful year in 2020, continuing to achieve our vision to deliver strong financial performance, become known as one of the world's great innovative companies, and elevate our commitment to corporate social responsibility. We are ready for the 2020s, and now we are ready for Q&A. Dennis?
Great. Thanks, Jim. Shannon, we can now open the call to Q&A, please.
Ladies and gentlemen, to ask a question at this time, please press star then one on your telephone. To withdraw your question, press the pound key. We ask that you please limit yourself to one question. Please stand by while we compile the Q&A roster. Our first question comes from Jeff Sprague with Vertical Research Partners. Your line is open.
Hi, good morning. This is Brett Linzey in for Jeff. Hey, just want to come back to the incremental revenue opportunity. I think you said two points contribution from CRAFTSMAN, but if we include some of the other key programs, FLEXVOLT, ATOMIC, EXTREME, with CRAFTSMAN, what are you contemplating in the guide in terms of incremental growth from those programs? Thanks.
Yeah, I would say that the two points for CRAFTSMAN, obviously, I stated in my prepared remarks. We expect mid-single-digit performance for the overall business on a global basis. You'll have the other share gains that we'll achieve above market GDP, which is probably in the high ones, if you look at our global mix, anywhere from 1.8% - 2%. Any other share gains that we gain along there will add to that. We do have some pressures, as I mentioned, in emerging markets that we expect to continue in the first half and in some of the industrial tool channels as well in the first half. There will be a bit of a drag on that. Those are the main categories.
I would expect share gains from those innovations, CRAFTSMAN, market growth of close to two, and then you're going to have some drag in the areas that I mentioned that kind of get you to that mid-single-digit number.
Thank you. Our next question comes from Julian Mitchell with Barclays. Your line is open.
Hi, this is Jason McKenzie on for Julian. Just a question around the first quarter guidance, particularly around the margin rate. I think last year there was about a $40 million-$50 million inventory charge taken as a result of commodity cycles in the tools business. Is there a reason why, despite that theoretically being a non-repeat in Q1 2020, the operating margin rate is going to stay sort of flat year-over-year? Then maybe just any guidance around what the total commodity headwind/tailwind is for the full year?
The first quarter, as I mentioned in my comments, we do have an incremental tariff and currency headwind of the annual number is about $115 million, and I said about half of that's going to hit in the first quarter. That's clearly of the magnitude of very similar to the number you mentioned related to the item in the first quarter of 2018. That's a significant drag that we're seeing. You had a one-time that last year that goes away, you have this particular issue that comes in. If you look at the split for the full year, I said $115 million of headwinds. The tariff number's $80 million-$90 million, the rest is currency. Commodities at this point, we expect to be neutral.
Of course, that's an opportunity as we go throughout the year to see if we get a little bit of deflation as the year goes on.
Thank you. Our next question comes from Tim Wojs with Baird. Your line is open.
Yeah. Hey, guys. Good morning.
Good morning.
Good morning.
I had a two-part question if I could. I guess the first, just the guide for Q1 implies acceleration through the year in tools and some more meaningful margin improvement through the year. I guess, what's your line of sight to both of those within the tools segment? The other side of this is just, Jim, you talked about Black & Decker revitalization. I was hoping you could give us just a little color on what exactly that means.
Don, you take the first part.
Yeah.
Tim, we really respect and appreciate you so much, we're actually going to take your two-part question, even though it's really two questions. Don?
I think it's very cool how he addressed that, though. Two-part question, it's really one question. Yeah. The cadence for tools is that we expect, in the first quarter, kind of relatively flat, maybe down slightly for organic growth, but I feel like it'll be close to relatively flat. As we go throughout the year, this comp issue that we're dealing with in the first quarter for CRAFTSMAN is quite significant. It's almost three points in the quarter. When you factor that in, you factor in some of these slower markets I mentioned in emerging markets and industrial, that's kind of how you get to that number. That's going to start to regulate in Q2. Obviously, when you get to the back half, you don't have those types of pressures you're dealing with year-over-year.
We expect nice growth from the program of CRAFTSMAN for a full year, as I mentioned, two points. I will remind everybody, the POS continues to be very strong for CRAFTSMAN, and it's double digits. It has been double digits throughout 2019, and we expect to continue to be strong as we go through 2020. The success of this rollout will help us drive that type of performance. We expect some of these markets to get a little better in the back half, and that's probably the right way to think about the cadence.
On the revitalization of the Black & Decker brand, this is an opportunity that has been in front of us for a long time, and it's taken a lot of thought and preparation, and we've had so many other priorities in revitalizing brands that it was a little bit lower on the list. It truly is a remarkable brand, one of the great consumer brands in the world. It's an opportunity to unlock some great value from this asset. Jeff, as you know, was the mastermind behind the CRAFTSMAN revitalization and execution of that. Now he tackles this Black & Decker project, and he's actually done a fair amount of work on this already, has a fair amount of definition for what it is.
How much of that he and we want to share right now is not very much, because there's always the element of confidentiality and to some extent, surprise when it comes to these sort of things. I will turn it over to Jeff, and you can tell them whatever you'd like to disclose at this point in time, with recognizing that it won't be too much.
To add on to what Jim said, I guess the genesis of this was that Black & Decker in any survey, any study you do, is iconic, remains iconic from an aided and unaided awareness perspective. We looked at the progress across our tremendous stable of brands these past 10 years, and I'll give you rough ranges. We had growth like 70% in the STANLEY brand, 9%-10% with LENOX and IRWIN since we acquired it. Over 250% in DEWALT and 500% in CRAFTSMAN. We love those numbers. We're really excited, and it's fueled that growth. Black & Decker is also at the largest size in history, but it's only been up about 3% in that timeframe. We look at it as a real opportunity cost. We could do so much with that brand, and we haven't had the time to do it.
I now have the opportunity to do just that. We're excited about what can happen in the next few years here.
You can see we're not disclosing a whole lot right now, other than it's a big opportunity. More to come on that. You'll see it over the coming quarters. Should have some impact by next year and really material impact beyond that.
Thank you. Our next question comes from Nicole DeBlase with Deutsche Bank. Your line is open.
Yeah, thanks. Good morning, guys.
Good morning.
Morning.
My question's around free cash conversion. If you guys could talk a little bit about the differences between the low and the high end of the guidance for 2020, and I guess, what's the scope to get to 100% + conversion sustainably from here?
Sure. Yeah, I would say that for 2020, that range of 10% of 90%-100% is really dependent on probably primarily two factors. One would be working capital. We did end the year at close to 10 turns, we will continue to drive improvement in that number. To get a positive impact in your free cash flow related to working capital, you need at least a 0.5 to 0.7 tenth of a turn improvement for the whole company to make that happen. We might get close to that, but it might actually be closer to neutral than a positive impact from working capital. CapEx will be something that continues to be between 3%-3.5% of our revenue.
We also know that it'll probably be at the higher end of that range in 2020 as we start to work through some of these China supply chain mitigation strategies as we move production to other countries in certain cases, as well as we will be building our CRAFTSMAN plant in Fort Worth, Texas, as well, and there'll be a fair amount of cost in 2020 related to that. Those are really the two factors that kind of result in that variation. Our goal is clearly to get to 100% or more, and always is. We occasionally, on an annual basis, will manage that to achieve these other strategic objectives.
Thank you. Our next question comes from Michael Rehaut with JP Morgan. Your line is open.
Thanks. Good morning, everyone.
Good morning.
First question, I guess first and only question I have is on just kind of parsing out the 2020 guidance a little bit more. Specifically, just wanted to revisit the Margin Resiliency Initiative. You referred to it in the prepared remarks as something that you expect to continue to materialize and just wanted to get a sense of how you're thinking about that flowing through and the timing of that benefit flowing through in 2020. If you're still thinking about the hundreds to $150 million type of benefit for the year and how it would hit the P&L. Just as a slight clarification, the $200 million cost reduction, I'm coming to that being about $1.05 in EPS benefit. I just didn't know if my math was off or there was something different between that and the $0.95.
Certain things, certain parts of the world, you can't do it as quickly as you'd like, so you'll have a little bit of an impact to that. That's why it's about $0.10 different than what you're calculating for your math. That obviously will carry over into 2021. On margin resiliency, I'm glad you asked that question. If you remember from the October earnings call, when we gave you some initial thoughts about 2020, we really had the objective of trying to position the company with an EPS growth that was reasonable given the headwinds that we were going to experience or as a carryover into 2020. I think we've done that with the guidance today at 6% midpoint.
We also wanted the margin resiliency to get about $100 million-$150 million of value in 2020. We wanted that to be more of a contingency. I mentioned that in my comments earlier. That's really the plan. It's not baked into our guidance right now. It's there for if other headwinds come our way that we have to deal with like this virus in China, as an example, might be a little bit of a headwind for a period of time. Currency might be a headwind that emerges, or it doesn't emerge. These headwinds don't happen. It's an opportunity for us to outperform. As I mentioned, reinvest in the business. The cadence by quarter is relatively consistent. It's not going to be back-end loaded in a big way.
I would expect you could be pretty close to evenly split, maybe 40% in the first half, 60% in the back half.
If I could just add. When we look at the environment that we're in, over the last three years, the external headwinds have averaged about $300 million a year. If you look at the five years preceding the 2017 to 2019, which would be the last three years, if you look at the previous five years, they averaged $135 million a year. We had a step function change in headwinds, and most of those headwinds, at the beginning of the year, or a significant proportion of them, it was impossible to plan for them. I think we're sitting here at this juncture with the potential that we could have headwinds of hundreds of millions of dollars like we've had over the past few years, and obviously, we have some of that in the plan, or not, or something less.
It's only prudent to reserve a pretty significant contingency for the potential that we could have really significant headwinds similar to what we've had over the last three years. That's kind of the way we're thinking about it. If they don't come, then we have a fantastic opportunity to outperform our earnings as well as reinvest in the company and in the company's growth.
Thank you. Our next question comes from Deepa Raghavan with Wells Fargo Securities. Your line is open.
Hey, good morning. Thanks for taking my question.
Good morning.
Good morning.
Okay. Question is on capital deployment. It's a good start, especially purchasing some defense exposure with CAM. Don, how should we think about deployment pace, the pace of deployment going forward, given it's a $1.5 billion cash deal, takes up much of the excess cash availability over the year, even as you're de-leveraging? Any thoughts there? Thank you.
I'm going to tackle that question because. Don has had so many questions about guidance, I want to give him a break.
That's very nice.
We both think about capital deployment quite a bit, and we happen to agree on our approach. As most of you know, our long-term capital deployment strategy is to allocate 50% of our excess capital to M&A and 50% to giving back to the shareholders in the form of dividends and repurchases. Over the last 20 years, if you calculate that, you will find that it actually turns out to be 50%, 50/50. We've been true to that. We will continue to be true to that because we think that for this company, that is the best value creation strategy for the long term. We shouldn't look at these things necessarily in isolation. From a tactical point of view, we were at 2.0x debt to EBITDA at the end of the year.
This will take us up to 2.6x for a period of time until we work it down again. There won't be a lot of M&A activity, of significant M&A activity this year, unless something really significant comes along, then we look at what are the options. Going forward, we have the security business, which is a potential asset to monetize if something really down the fairway came along our way. We also have the MTD option in front of us, we have 10 years to execute that. There's no pressing need to have probably about $2 billion of, when we finally implement or execute that option, it would be about $2 billion if we did it in the 2021, 2022 timeframe. I think we're in a great position from a tactical point of view, too.
We have the opportunity to create excess capital if we see something really great that we want to execute on in terms of M&A. We also have the opportunity to kind of take 2020 as sort of a rebuild the balance sheet year back to where we want it to be for the dry powder. We'll go from there.
Thank you. Our next question comes from Justin Speer with Zelman & Associates. Your line is open.
Thanks, guys. Just wanted to follow up on the comments on the promotional cadence and channel inventories. You mentioned them being full for at least a portion of the tools and storage business, and you mentioned promotions being a little bit more elevated in parts of the power tool business. Just wanted to get a sense for what's going on there and thinking about the incremental tariffs, incremental pricing, if these elements are going to make it really difficult to get incremental pricing to at least partially offset the carryover tariffs and currency.
Yeah. I'll take that. The promotional activity, I would kind of summarize that as, it was an intense holiday season. There were a lot of things going on in the power tool space. We ran probably higher level promotions than originally expected as we went into the quarter, which that can happen sometimes in a holiday season, like the fourth quarter, even in the second quarter occasionally, as we go into the late spring and summer. I would just say that's things that happened and nothing really unusual about that.
I would also say that we did have a little bit of a reduction in the inventory in the channels by our customers. Not a massive reduction in weeks on stock, but there was a little bit of a reduction in some of our major customers, which is good, because that's just them managing their inventories appropriately. As you know, in the case of one of our customers in particular, they build a higher level of inventory due to a significant launch of CRAFTSMAN. That's going to have to continue to be something we monitor. We're going to manage that throughout the year as we go through 2020 and still achieve two points of growth, as I mentioned, for Craftsman as we manage that dynamic.
If the POS continues to be strong the way it has been in double digits, the amount that we have to manage in inventory will become smaller and smaller. As far as tariffs go, the $85 million carryover, a lot of that is tariffs that were put in place in the back half with some pricing put in place in that period as well. There's a little bit of carryover price, but we're going to manage price more through the Margin Resiliency Initiative versus specific pricing actions for tariffs. There'll be a little bit of that associated with List 4A. That's not a large number.
Thank you. Our next question comes from Ross Gilardi with Bank of America. Your line is open.
G ood morning.
Good morning.
Good morning.
I was just wondering, can you give a little more details on CAM, like how profitable is the business? When did the transaction actually close, and sort of why is the accretion so far out? I realize these are series of same questions, but a number of questions, but just really some more color on CAM aftermarket versus OE and Boeing exposure and whatnot.
Sure. We're not disclosing the actual profitability level at the request of the CAM folks. However, suffice it to say that it's a high-growth, high-margin business. It has substantial EBITDA and EBITDA growth potential ahead of it. The aftermarket is a pretty significant part of the revenue base. It has grown approximately 6% organically over the long term. A very nice asset, high growth, high profitability, good aftermarket content, and a lot of engineering content, which a lot of these components are in critical functions on airplanes. We're very happy to have made this acquisition. It's a strategic platform. There are a multitude of bolt-on opportunities as well as some larger opportunities that may or may not become available over time. It just gives us a great runway for future growth.
Thank you. This concludes the question and answer session. I would now like to turn the call back over to Dennis Lange for closing remarks.
Shannon, thanks. We'd like to thank everyone again for calling in this morning and for your participation on the call. Obviously, please contact me if you have any further questions. Thank you.
Ladies and gentlemen, this concludes today's conference call. Thank you for participating. You may now disconnect.