All right. Good morning, everybody. This is the 8:45 AM session. I am Jeff Lick. I am the auto ecosystem and consumer analyst here at Stephens. We have with us Titan Machinery, the CFO, Bo Larsen with us. This is not a name that we cover. We know the name pretty well, both in our role here and in previous roles. I have gotten to know Bo, over the years. Maybe a good place to start Bo. We just kind of set the stage a little intro background into the business. Just talking about the ag business, the construction business, Europe and Australia.
Yeah. No, sounds good. We are a company who got its origins in the late 1970s, and for a long time, it was a small handful of dealerships in the North Dakota region. Ultimately, Dave Meyer partnered with Peter Christiansen in the early 2000s, and they had a vision that was that the CNH distribution channel was under-consolidated, and that we could play a major part in that consolidation. They started on that in earnest, again, focused in that area in the early 2000s, started rapid consolidation. Company went public in 2007 at $300 million in revenue, and by 2012, largely through M&A activity, it had grown to a $2.2 billion company. Really up until that point, all focused in the U.S. and in the Upper Midwest. The core footprint is North Dakota, South Dakota, Nebraska, Iowa, and Minnesota.
That is where a lot of the concentration is for our domestic ag business. We do have some locations outside of that. CNH also has, and I guess that is a talking point as well, a construction business. Along the way, we added Case Construction, some standalone locations, and many of them just as part of another avenue within our existing ag stores. About that 2012 timeframe, we started to enter Europe. As that stands today, we are in Romania, Bulgaria, Ukraine, with our European headquarters in Austria. Just a couple years ago here, we actually bought a 15 store Case IH dealer group in Australia. As it stands today, domestic ag, roughly 70% of the business, and then domestic construction, Europe, and Australia are all normally somewhere between like a 12% or an 8% revenue mix, getting us to our total there.
The consolidation model for us was one that the founders of the company actually kind of got from regional banking consolidation and what they were seeing in that space. The thought was, "Hey, let us pull these groups together and then let us centralize back office functions so we can do that more efficiently and standardize that process and allow the dealerships to do what they do best, which is focus on customer outcomes.
For those that know the franchise auto dealer model, it is a similar. You have equipment, service, parts, you rental. Maybe you could just explain the interplay between those businesses. Obviously, equipment is going to be new and used. Used is going to drive, or new will drive some used through trade-ins.
Yep
Then maybe just the relative gross margins as well, because even though your revenue might skew towards equipment, gross profit dollars actually is a little more weighted towards service.
Yeah. We will kind of talk about kind of what normal is, and now, of course, we are really kind of at the bottom of the trough there. From a normal perspective, yeah, equipment is definitely upwards of 75% of the revenue mix. That is between both new and used. Parts and service would make up about 25% of the revenue. From a gross margin perspective, in normal times, the 75% of the revenue on the equipment side provides about 50% of the gross margin, and then the 25% of the revenue on the parts and service provides about 50% of the gross margin. That is because equipment margins, again, normalized on the domestic ag side. For example, are about 10%. Parts, low 30s, call that 31, 32. Service, low to mid-60s in terms of margin there.
More recently, with the down cycle, the pullback in equipment revenues, the compression on the equipment margin, parts and services provided upwards of 70% of the gross profit dollars as we have worked through inventory downsizing and just generally finding kind of the bottom of the trough here on the ag cycle. We have seen our equipment margins starting to normalize and head in the right direction, so that profit mix is shifting back towards normal, but we are definitely not there yet.
You've made reference to the cycle and normal. Maybe it's a good chance or time to dig into that. The majority of your gross profit comes from the farm economy in the U.S. Maybe just kind of talk about we're at what looks like maybe a bottom of a cycle, but maybe just talk about how we got to the bottom. The COVID time was a unique peak, I think, as well.
Yeah.
Just kind of set the stage in terms of the dynamics there and where we're at now.
Yeah, it was a pretty different cycle with COVID. COVID obviously had supply chain issues across all portions of the economy, but ag really felt like it was one of the last to kind of come back from that. Just as the OEMs were recovering from the supply chain crisis, soft commodity prices were softening and demand was really falling. That caused a couple of things to happen. Because of the supply chain crisis, when farmers were highly profitable, there was a limit on what could be produced, and thus, if you look at the industry volumes that were out there in those years, it wasn't significantly above what long-term averages have been. The next thing that happened, right, is then they started to be able to catch up on backlog, and demand fell out.
That combination really flooded the industry with too much inventory at a time when there wasn't a lot of demand. Then, really, that set the stage as we were going into calendar year 2024. We could see this big wave of orders coming that we couldn't cancel, and in some cases, we had ordered three years prior. OEMs were rapidly catching up. They were getting ready to deliver that over the next six to nine months, and we knew we had a road ahead of us. What we had kind of said was, "Hey, inventory's going to peak in July of 2024. We've got an 18 month journey to get it back down to where we need it to be." That's exactly what we were able to execute on.
As we were ending calendar 2025, we had gotten inventories about where we had wanted them to be. Market's still soft here, right? That's the inventory side, but profitability for farmers is ultimately what determines how much equipment is going to be purchased. In fact, if you just study net farm income charts, industry volumes track that pretty closely. Commodity prices remain soft. Iran war and other circumstances have elevated input costs, and thus farmer profitability is squeezed, and demand remains low. That's where we're at today. What's been building, though, and kind of the conversation around maybe a firm bottom or a solid bottom, we've had multiple years here of significantly below historical averages. In fact, this year's estimate on the large ag side of things is expected to be about 50% or one-half of the industry volume of the last 25 years.
The year before that wasn't great either. It was about 40% below, and the year before that was 20 something below, right? So, we have multiple years here where it's been further below, and that's part of if we're talking about indicators in terms of when the cycle is going to inflect, first and foremost, it's got to be farmer profitability, and that hasn't happened yet. That's kind of been stable here, and the backdrop, if you ask today, next year is similar to this year. Inventory health needs to get in check, and that has largely happened. OEMs are still working inventory down. Dealers are working inventory down. I would say our absolute dollars coming into this year, we were kind of ahead of the game with our aggressiveness, so we were good there, just working on mix a bit. But inventory health is coming in check.
Fleet age is getting older, right? If they're only buying half the equipment that they have on average in the last 25 years, naturally, the average age of things is getting older. So, at some point, that drives some incremental demand, and that's kind of the thought process going into next year. If profitability, based on what we know today, is similar to this year, and thus your base case would be demand would be similar to this year, we're far enough away from those higher industry volume times that this replacement cycle maybe provides a little lift, a modest increase next year. That's what the commentary has been so far in this space.
Talk about your inventory strategy. I mean, you're growing new a little bit and shrinking used. You've focused investors on trying to be a little less cyclical. Just talk about as we get into 2027, what are the dynamics that profits grow and it's a good scenario for you?
Yeah. To start the year, we were kind of saying, "Hey, from a domestic perspective, our inventories are about where we want them to be. We want to improve the mix." What that really meant is that we had some aging equipment, specifically used HD equipment. We wanted to sell that through. As we've been successfully selling that through, we've been really focused in where we are replenishing inventory, and it's really on the high demand, higher ticket, cash crop, new equipment. So, that's where we've seen the dollar shift. Overall, inventory balance really hasn't changed. We've gotten a bit more used. We've gotten less used, which is healthy for us. We have seen those margins continue to normalize and move up. That's a function of a couple of things, inventory health and the demand environment.
The demand environment hasn't changed much, but the inventory health has. Used equipment values have really stabilized also. 2024 and part of 2025 was a period of instability, and I'd say pretty significant volatility in used prices, where they were falling rapidly. If you have inventory on your balance sheet and its value is falling rapidly, that's causing some P&L pain. That really stopped by the time you got to about the back half of 2025. So, we've been more stable. In some categories, we're seeing used values start to improve. That should continue next year, given that inventory health is improving, even if demand is flattish, that you should still continue to see that benefit on the used margin side. That ultimately then helps the total equipment margin, and that's really been the compression story.
Parts and service have really largely held in there, both from a top-line perspective and a margin perspective. So, it's really getting that equipment margin to normalize, and then the second lift would be actually seeing top-line growth on the equipment side.
Just shifting gears to the smaller portion of your U.S. business, which is construction, which obviously there's the AI data center boom, and depending on what state you're in, it's different. Just talk a little bit about that and how that's impacted the business and what are the trends there.
Yeah. So that's been good. I would say largely, again, our core footprint is the Dakota, Nebraska, Iowa, and Minnesota. I think we've all kind of been following election results and some of the fallout from that in different states, I think taking some thoughtful measures in terms of how they think about data centers and otherwise. Our states are pretty well positioned. We do have a lot of land that isn't by larger populations, and a lot of these states see the opportunity to continue to help their economies by being supportive of data center projects, and that continues to be the case. We've seen that uplift both on the rental equipment side, but then also on the equipment demand side of things. So that has been good. I would say overall, the construction economy in our footprint is pretty healthy.
A portion of our construction sales go to growers, so if they're not buying tractors, they're probably not buying skid steers and otherwise. So that is the soft portion of our construction business. Otherwise, I would say it's a good environment. We're seeing rental utilization rates increase. That margin is improving. Pretty overall a good environment on the construction side.
The other two business lines, Europe and Australia, again, smaller portions of the business. It's interesting, you do business in Ukraine. Be curious to get a couple anecdotes there. Also, you sold Germany, and I think there's a lesson to be for investors of terms of where you want to do business and why. So maybe we could first talk about Germany and then maybe just Europe in general.
Yeah. Just before we transition that, did you happen to I saw your hand raised. Did you happen to have a question on construction?
I actually have a question. You talked about the recovery vectors, farmer profitability. Inventory in check, and then fleet age. What about interest rates? How does that play into this overall macro equation?
Yeah. So interest rates, certainly a factor there. It's a smaller portion of our P&L. But yeah, it definitely on the margins is another factor there that is against us, and projections are that interest rates will probably increase a bit here. So I'd say it's a smaller factor just when you're looking at the impact that it has on its P&L. Equipment cost, input cost, do you own your land or not, commodity prices, those just heavily outweigh the interest rate impact, but it is still relevant for sure.
Are most purchases financed?
Yeah.
So it affects every purchase.
Yes, it does. But again, the interest rate that they're paying on that relative to what they're paying for input costs or where commodity Like, if commodity price increases some, it's just going to dwarf the impact of the interest rates. Is all I'm saying.
Got it.
Yeah.
Thank you.
Yep. So then I think we were just talking about basically from an international perspective. Maybe I will start with Australia and then move to Europe. Australia, we just got into in the last couple of years. Really, we are in the wheat belt in Australia, so it is very similar equipment. Well, it is the exact same equipment that is being sold in the Upper Midwest, and it is growing wheat, which a lot of wheat is grown in our territory as well. There is a lot of synergies between Australia and the U.S., and it was under-consolidated. So we saw basically a similar opportunity to go to an area where farmers are growing similar crops with similar equipment and the ability to consolidate. And actually, last year, we did the first acquisition down there. So we started with 15 Case IH dealerships through one acquisition.
We did not add any rooftops, but we added the New Holland brand to six of our 15 locations. So already, quickly working towards half of our footprint is dual branded and see a real opportunity there. Australia happens to be this year, the back half of this year, this one with the most positive sentiment. They have gotten really good rainfall there, in some cases, record crops. That momentum really started to build in August and expecting a nice back half of the year. And the English speaking, different time zones, one of the things we are talking about there is does that help us really execute a 24/7 call center plan? So bullish on the long term there for Australia.
For Europe, for us, it has been a journey, and we have learned along the way, and it has been going back to the 2010s, and there are some countries we were in and got out of. Most recently, we exited Germany. And that is where you say Europe, it is one word, but really each country has very different facts and circumstances. So case in point there, let us just compare. Romania is almost half of our European business. When conditions are right, can be highly profitable from a pre-tax perspective, much more profitable even than the U.S. business can. Why is that? Well, one of the reasons is that we are the exclusive importer of Case IH equipment, meaning we are the only one that can sell Case IH equipment in the entire country.
You juxtapose that with Germany that we exited, and we were one of dozens of Case IH dealers competing with dozens of New Holland dealers. Overall, Case IH had low single-digit market share, very competitive. There are more names that are manufacturers in Germany, and thus there is more competition there itself. A lot of Germans like German-manufactured products, for example, and CNH does not have manufacturing in Germany. So it was just a really competitive space for us. We wanted to focus on I have been in my role now four years. BJ stepped into the CEO seat in February of 2024 after having already been with the company for a couple of decades. As we talked, our number one objective that we are executing on is higher highs and higher lows.
Part of that was getting out and physically going to all areas of our footprint, both domestically and internationally, and sizing up where it is that we can drive sustainable returns, and what we need to change to be more profitable through the cycle. Germany was highly competitive, and we did not see that materializing in the near term, so we did work on that exit. We have exited some outlying locations in the U.S. as we have focused more on a tight, dense footprint. Over the next couple years, I think you will hear us talk more about M&A in the Upper Midwest than our acquisitions than divestitures as we execute on the strategy. Part of the strategy also, aside from your footprint, is leaner balance sheets.
We have also just been changing the mentality, and changing incentive structures to get people thinking not at the store level, but at the region level or the overall U.S. level. "Hey, we are a large consolidator. Let us act that way. Let us not act like we do not have a sister store down the road." Not every store needs a stock combine, a million-dollar stock combine sitting on the lot. We are thinking differently. We are driving different behaviors. We are changing some structure and incentives. That is going to help us. The number one thing we can do to perform better through the cycle is to manage that inventory tighter, and that is what we spend a ton of time and energy on.
In these environments where you are at a prolonged trough, you have CNH, Deere. In any given area, there is probably going to be an option for a farmer. Then obviously, you guys are the distributors. You have the luxury maybe of taking inventory down. How does it work with the OEM in terms of when we get into these prolonged cycles, in terms of how Case helps you, and Deere might be helping their dealers as well, and which could somehow maybe if Deere gives more help to their guys than CNH gives to you, then you are at a disadvantage. How does it work at the competitive level and at the OEM level?
One thing I would say that they recognized and the major OEMs had more discipline on this time around was manufacturing. They pulled back sooner. They have held back longer. They keep talking to producing to retail demand. All of that has been helpful to get inventories in check. Then from an actual financial support perspective, a lot of them tend to use the term like pool funds. Essentially, what they recognized and they are doing a better job of, say, than they did 10, 15, 20 years ago is dealers need flexibility. Basically, you can earn funds over time that you can then deploy. Maybe it is buying down interest rates in a high-interest rate environment. Maybe it is just helping you sell through used equipment without it being negative to your cash flow, or it is additional programming dollars.
Again, in a tight environment, try to get that incremental sale of a new combine. Ultimately, it can result in a discount on your end, right? There is list price is one conversation, but then ultimately what the customer really looks at is what is the check they are writing, right? The check they are writing certainly starts with list price on the new equipment, but then there is pricing programming. Then they also have a trade-in, and what is their trade-in worth? The net check they are writing is the difference between what we are willing to pay for their used and then what we are really charging them on the new side. That had been stretched lately, right? The used values were going down. The new values were not going down. They were accelerating through COVID. That caused that wider gap. That has been more challenging.
Used values have improved, but those pool funds really allow dealers to deploy them in the way that makes the most sense. Some farmers really want that long-term interest rate buy-down, and others just want like, "Hey, I am actually paying cash and I just want the lowest price." You cannot be as prescriptive. We have seen all the OEMs kind of react accordingly. Certainly, like any given month, any given quarter, is Deere getting more aggressive over here with these tactics, or is CNH getting more aggressive? That kind of floats back and forth. We are kind of the steady ship just trying to navigate through the trough. I think we have done so pretty successfully and positioned ourselves well as things continue to move in the right direction.
With respect to this cycle, maybe talk a little about how it compares to others in terms of length. As we look at 2027, I think most people would probably take the bet that, look, diesel is probably going to be elevated year-over-year, so you will have that to deal with. Interest rates will be a little higher. Maybe we get a weaker dollar, and that could help prices. How does this cycle look compared to others? It does seem like it is prolonged. Again, what are going to be the conditions that will get us out of it?
Yeah. The last cycle, actually, if you look at, and I guess I will speak in fiscal years, we had a pretty prolonged downturn in fiscal 2015, 2016, 2017, and 2018. Then things were starting. That was four consecutive years. Then things really started to move in the right direction in 2019 and then more so in 2020 and 2021. That cycle in the peak there, that 2011, 2012, 2013 timeframe, commodity prices were higher and industry volumes really flushed. They almost doubled what the 25-year average was. So, a ton of fresh equipment got put into the market, farmers were really profitable, and then commodity prices softened. You had a brand new fleet, right? People already made their purchases, and now they are not profitable. That kind of paved the way for kind of a longer, harder four-year journey.
This time around, because of COVID supply chain, you simply couldn't overproduce. We barely got much above what that longer-term average was. But again, I guess here, this has been essentially the third year. Then next year, I guess, time will tell if that's a similar fourth year, or really, we're already starting to move in the right direction. I think the general base case is we're saying, "Hey, it's kind of moving in the right direction." So in that case, you would almost say maybe it's actually a year shorter than the last one. But yeah, over time, if you look back in history, a four-year downturn is certainly a long one. A three is on the long end. It'd usually be more like on the two-year side of things. What's in our favor, again, is that production was limited.
What we need to see really spark things is an improvement in commodity prices, and whether that's E15 or other measures to spur demand on the U.S. side, whether it's production disruption in South America, whether it's Chinese buying, whether it's a stronger or weaker U.S. dollar. I mean, yeah, there's all of those factors that are out there. Ultimately, something pops and causes a significant and sustained change, and that's kind of what we're all waiting for. What I would say, we're trying to control what we can, and one thing we're really trying to be advocates of is find more uses, expand E15, sustainable aviation fuel, other ways to use corn and soybeans. Because with genetics, with technology, the U.S. farmer's gotten really good at producing crops.
We need to help ourselves by, just like the oil industry did and really got pervasive into everything, we can be more friendly to the environment, be more renewable, and help the demand side of the equation for the crops that we're producing.
Any other questions?
Well, about a year ago or so, you were talking about a lot of internal things you were doing to improve the business. Don't let a downturn go to waste. Could you update us on that?
Yeah, for sure. Yeah, and we've been busy at that, and I appreciate the question. That's the one that doesn't get as much oxygen right now. If we have an investor call, they're all wanting to know when does the cycle turn. Investors like to hear that. Right, right. But outside of that, controlling the controllables, right? Last year was a process to divest Germany. We got rid of that. We divested some outlying U.S. locations. We've really honed in the focus on a denser footprint in the Upper Midwest. There's all kinds of initiatives to drive leaner, meaner balance sheets. Some of that truly was changing incentive structures.
Basically, if we go back two years, anybody in the field had an incentive structure that was solely dependent on their location, right? And we've changed more and more of those KPIs to be at the region or the U.S. level. We've also done a lot more work with business intelligence reporting and in centralizing decision-making, saying, "Hey, we have too many combines in the north. Let's move some down over here. Oh, hey, don't go order that new equipment over there. Let's spread it out over here." Figuring out ways to have stores work more closely together, to be thinking about it as shared inventory. And then the initiatives on the parts and service side. AI is obviously a big talker. There's plenty of places where we've really infused that in the business. The first one that's really tangible is on the equipment evaluation side.
That was a multi-year journey. I'd say we kind of got to where we were shooting to be kind of middle of last year, really just leveraging the technology that's available, all the data points that we have internally, but also the other data points out in the market. What is a used 8250 combine with 300 engine hours really worth to protect us, to make sure that we're buying it right so that we have better margin? On the tech side, if you think about in the U.S., just generalizing, let's say we've got 750 techs of various ages and experiences. Some of those continue to age and will ultimately retire. How do we capture all the knowledge on a service work order to make it easier for a less experienced tech out in the field?
Here's the symptoms, and then it's already suggesting, "Hey, this is the first thing to check or second thing to check." Or even before you go out in the field, "Hey, here are the parts you probably want to bring with you so you don't got to make a separate trip." We've been working on, and soon enough here, we'll launch a new CRM that really helps us just be more proactive for a customer as well, I would say. If you think about it, we should easily know this customer has this equipment in their fleet. It has this many engine hours. Here's the telematics data that we can pull. Here's the last time it had an oil change. We could proactively reach out, "Do you want to schedule that, or do you want us to send you oil?" Or various other things.
Or, "Hey, they're typically trading this equipment. Let's go out there and have those conversations." Just a better user experience for customers, making it easier for them to on their phone while they're driving auto-steer down the field, "Hey, I'm going to go buy a part. Let me just go to Titan's website quick, find it, buy it, have them ship it over to me." Just serving them better so that we can get more of their share of wallet on the parts and service side. The other big initiative we've been pushing is extended warranties and preventative maintenance agreements. Now, if we get that contract with them up front, then you will be basically locked in that work to the extent that you don't get that contract with them, right?
More and more of that business, you're out there competing with others, and some of that you're ultimately going to lose. If you're thinking about something these days that's a million-dollar purchase, they do want more and more total cost of ownership. They want to know what it's going to cost them, right? If you pair that purchase with the preventative maintenance agreement and extended warranty contract, you can give them more of that direct visibility to total cost of ownership. As farms continue to consolidate, they're large. They're buying large pieces of equipment. They're making these big investment decisions. They want more confidence in ownership. They want confidence that they're working with a dealer that can serve them across their geography. Some of these farms are pretty large and they're spreading areas.
I think as all of those dynamics, as equipment's getting more technologically advanced, as long as we do our part to stay ahead of it, to be the ones that can best service them most efficiently, most proactively, that's where we'll continue to be a better partner for them and grow market share. Anything that's helping us on those initiatives is what we're spending time on behind the scenes. It's something that we're all really excited about and we are seeing benefits of. But I'm really excited.
The real test, right, is through the next cycle, because what we've said is, "Hey, we're going to be able to be more higher highs and higher lows, more profitable all the way through the cycle, more sustained profitability on the downturn, better cash flows." That gets us into opportunities to return more to shareholders where we haven't in the past. All of that is so much of what we're talking about on a day-to-day. When I put my investor hat on, I'm answering the questions that are coming in. It's mostly cycle right now, but it'll turn, and then I think people will be excited about it. We're excited about it too. We're excited to talk about it, but most importantly, we're excited to demonstrate it. Thank you so much.
Well, getting pretty close to the end of the time, Bo. Just to wrap things up. I guess, parting shots. I think the question I'd have is, okay, let's just think through the probability distribution of 2027. It seems like look, if you just use history as a guide, there's going to be a turn some point. How do you handicap and how should we think about 2027 in terms of the different outcomes? Let's say that we don't quite get the rebound we're looking for quite yet in 2027.
Yeah. So, I mean, I'd start with base case, and I would say, again, given the historically low position, and by the way, the industry volume on high horsepower equipment in our space is the lowest it's been going back to the 1970s. So it's a pretty extreme low. So I'd say there's really low possibility that you talked about another step back. Could it happen? Absolutely. It'd be further deterioration of farmer profitability. Base case for us is up modestly, and that's really what the consensus view has been in the industry. Could there be upside to that? For sure, right? So I would put the largest probability on, hey, up modestly, a small piece of it to say, hey, some deterioration given the dynamics we talked about. Then from there, kind of a cascading probability of how up it could be. Again, at some point it'll turn.
We're saying base case, that's not happening, but we're going to be really well-positioned. Inventory's healthier, margins are normalizing, less floor plan. We're going to be more profitable even in a flat demand environment, and we're going to make sure to capitalize on any of the upside that's coming.
Great. Awesome. Well, thanks very much and everyone have a great day.
Thanks.