Earnings Call: Q1 2020

Dec 18, 2019

Thank you ladies and gentlemen, and thank you for standing by. Welcome to Micron Technologies First Quarter 2020 Financial Conference Call. At this time, all participants are in a listen only mode. After the speaker presentation, there will be a question and answer Please be advised that today's conference is being recorded. I would now like to hand the conference over to your host, Head of Investor Relations, Farhan Ahmad. Sir, please go ahead. Thank you. And welcome to Micron Technologies First fiscal quarter 2020 financial conference call. On the call with me today are Sanjay Mehrotra, President and CEO and Dave Zinsner, Chief Financial Officer. Today's call will be approximately 60 minutes in there. This call, including the audio and slides, is also being webcast our Investor Relations website at investors. Micron.com. In addition, our website contains the earnings press release and the prepared remark filed a short while ago. Today's discussion of financial results will be presented on a non GAAP financial basis, unless otherwise specified. A reconciliation of GAAP to non GAAP financial measures can be found on our website, along with a convertible debt and CAP call dilution table. As a reminder, a webcast replay will be available on our website later today. We encourage you to monitor our website at micron.com throughout the quarter for the most current information on the company, including information on the various financial conferences that we will be attending You can follow us on Twitter at MicronTech. As a reminder, the matters we will be discussing today include forward looking statements. These forward looking statements are subject to risks and uncertainties that may cause actual results to differ materially from statements made today. We refer you to the documents we filed with the SEC, specifically our most recent Form 10K10Q, for a discussion of risks that may affect our future results. Although we believe that the expectations reflected in forward looking statements are reasonable, we cannot guarantee future results, level of activity, performance or achievements. We are under no duty to update any of the forward looking after today's date to conform these statements to actual results. I'll now turn the call over to Sanjay. Thank you, Farhan. Good afternoon. Micron is off to a solid start in our fiscal 2020. Despite a challenging industry environment, we delivered good profitability maintain positive free cash flow and strengthened our product portfolio. Industry supply demand balance continues to improve in both DRAM and NAND. Recent trends in our business give us optimism that our fiscal second quarter will mark the bottom for our financial performance which we expect to start improving in our Our strategy to increase high value solutions, enhance customer engagement and improve our cost structure is producing results. We have materially improved our competitive position, structurally, strengthened our profitability and are poised to drive long term shareholder value as industry conditions improve. High value solutions in fiscal 2019 accounted for approximately 50% of NAND beds. We expect this figure to grow to over 2 thirds of our NAND bits sold for fiscal 2020, and we remain on track to drive 80 percent of our NAND bits into high value solutions in fiscal 2021. This mix improvement is an important tailwind for us as it improves our profitability and reduces the volatility in our margins. At our Micron Insight event in October, we articulated a vision for Micron's transformation through greater vertical integration and differentiated products for the new data economy. I will highlight 2 of these and encourage you to view Sumit Savana's insight keynote available on our website for more detail. First, we announced the acquisition of a small company called ForwardNEXT. The ForwardNet's deep learning accelerator hardware and software technology when combined with advanced Micron memory makes it possible to deploy neural network models from any framework into edge devices for inference. ForwardNet's unique technology is an important capability in our portfolio that will help us learn and better address customers' needs in the evolving AI ecosystem. At Insight, we also launched our first 3 d XPoint product, the X100, which is the world's fastest storage device. The Micron X 100 SSD is dramatically faster than any other SSD, including those built with NAND or CD Crosspoint technology, and we are proud that it was showcased at Microsoft Ignite Conference by their Azure team. In October, we closed our acquisition of Intel's stake in the MST joint venture. We plan on relocating equipment and certain manufacturing employees to other micron sites as we right size the lehigh fab. Zdeploying equipment will also help us optimize Micron's front end equipment CapEx. As with any innovative technology, it will take time to scale up our CD Crosspoint product portfolio, ramp revenues and achieve healthy margins and we are excited about the long term potential of 3 d XPoint for both memory and storage applications. At the only company in the world with a portfolio of DRAM, NAND, and 3 d Crosspoint Technologies, we are in a unique position to develop differentiated products for our SMS. I will now turn to technology and manufacturing operations. In DRAM, our industry leading 1Z LP 4 DRAM based UMCP had the fastest revenue ramp of any product in the history of our mobile business. Our production mix on 1Z will increase throughout 2020 and DRAM cost reductions will be skewed toward the 2nd half of fiscal 2020. Our previously announced clean room expansion in Taiwan is on track and we expect output in calendar 2021. This cleanroom expansion is EUV capable. While we continue to evaluate EUV technology for deployment in DRAM production, Our current assessment shows superior economics through 1 gamma node utilizing advanced emergent technology along with Micron's proprietary multi patterning technologies. We are encouraged by recent industry progress on EUV productivity and will be prepared to deploy EUV when it becomes cost effective to do so. In NAND, we are continuing to make progress on our replacement gauge transition and expect to begin production on our 128 layer 1st generation RG node in the second half of fiscal twenty twenty. As a reminder, this node will be deployed for the limited set of products and we expect minimal NAND cost reduction in fiscal 2020. It will be followed by an introduction of a higher layer count 2nd generation RG node in fiscal 2021 targeted for a broader implementation, which will begin to provide more robust cost reduction as it ramps. The 2nd generation RG node will leverage our NAND technology leadership in CMOS under the array as well as QLC. Now turning to highlights by products and markets. In SSDs, demand from data center customers was strong in fiscal first quarter. Attach rates and capacities for client and consumer SSDs have continued to increase across our customers. There are supply shortages for SSDs across the industry and pricing trends are improving. We are making strong progress on which positions us to gain share almost three quarters of our client SSD bids in fiscal Q1 versus virtually none a year ago. In the data center market, sales of our previously announced high performance NVMe SSD nearly tripled quarter over quarter and we announced a 96 layer mainstream data center NVMe SSD. While growing our presence in NVMe, we continue to maximize our value propositions for the Sata market by ramping 96 layer NAND products. We achieved qualifications with multiple OEMs on our 96 layer SATA data center SSD. Our QLC technology continues to gain traction via QLC SSDs in volume production for SATA SSDs in the data center and consumer markets as well as NVMe SSDs for the consumer market. We became the 1st company to ship a 96 layer second generation QLC set our consumer SSD. In mobile, fiscal first quarter MCP DRAM and NAND bits grew approximately 50% quarter over quarter and our MCP market share increased approximately 50% year over year. In fiscal Q1, our leading edge 1Z LP4 DRAM based UMCP achieved qualification at multiple OEMs, driving the fastest mobile product revenue ramp I mentioned earlier. We are confident that 5G will be positive for both memory storage content growth as well as smartphone unit sales and are encouraged to see the launch of affordable 5G phones with price points as low as $300 that featured a minimum of 6 gigabytes of DRAM. The 5G phones launched to date, average 8 gigabyte of DRAM and 200 gigabyte of NAND significantly higher than the average content customer preference for our products and we remain well positioned in this market. We have the lowest power and the highest bandwidth LP5 product that begins volume production this quarter, which we expect will become more important in 2021 as 5G adoption accelerates. In data center, strong server DRAM demand in the second half of calendar twenty nineteen is creating an industry wide shortage of high quality high density modules for which we are seeing incremental demand from our customers. New CPU architectures supporting higher density chips and increased number of channels are driving strong DRAM content growth in servers. In fiscal Q1, we saw strong demand growth from enterprise and cloud customers. In graphics, witch shipments remained stable with GDDR6 PC graphics cards, showing strong growth, offset by seasonal weakness in gaming consoles. In fiscal Q1, we began shipments of our new 14 gigabit per second gddr6 and are well positioned to benefit from the launch of next generation gaming consoles in calendar 2020. The launch of these new gaming consoles will drive robust multiyear demand in graphics memory and these consoles will deploy SSDs in place of hard drives for the first time. This continues a trend of SSDs replacing hard drives across more high volume applications. In the PC market, bit shipments in the fiscal first quarter continued the growth trend from last quarter. Nevertheless, we are cautious which seemed likely to continue at least into early calendar 2020. In automotive, despite sluggish worldwide auto sales, we saw quarter over quarter revenue growth driven by secular memory and storage content growth. Our leadership in low power DRAM is also driving growth for automotive applications, which offers industry leading performance and capacity in a small form factor, and is well suited to service Now, turning that there are no perturbations to In DRAM, there has been a strong recovery in the second half of calendar twenty nineteen and our view of calendar twenty nineteen industry bit demand growth has increased to approximately 20%. The stronger than expected demand has resulted in pockets of shortages for us. We continue to exercise price discipline and walk away from price requests that do not meet our objectives. While these actions may impact short term revenue, improving our business mix will enhance our long term profitability. We are encouraged by recent DRAM pricing trends and are optimistic about improving supply demand balance throughout calendar 2020. As we discussed on our last call, a portion of the strength and demand in the second half of calendar twenty nineteen may be attributable to inventory bills in China, and we expect some of this customer inventory to normalize sometime in calendar 2020. As a result, we expect calendar 2020 industry DRAM bit demand growth to be in the mid teens percent range year over year which is somewhat lower than our prior outlook due to stronger demand in calendar We expect industry bit supply growth for calendar 2020 to be somewhat less than the demand as industry bit supply growth decelerates due to industry CapEx reductions. We continue to target our long term bit supply growth CAGR to be close to In calendar 2019, our bit supply growth will be less than the industry supply growth of mid teens And in 2020, our bit supply growth is expected to be slightly above industry bit supply growth. Turning to NAND, our industry bit demand growth expectation is in the mid-forty percent range in calendar 2019, and high 20s to low 30s percent range in calendar 2020. We expect calendar 2020 industry bit supply to be lower than industry bit demand. As a result of industry CapEx reductions, and consequently, we expect the industry environment to improve through calendar 2020. Micron's NAND bit supply growth in calendar 2019 is likely to be slightly below industry bit demand growth and in calendar 2020 will be meaningfully below that of the industry. However, we expect our NAND bit shipments growth in calendar 2020 to be close to industry bit demand growth as we ship our inventory during the 1st generation We expect our multi year supply growth CAGR to be in line with the industries demand CAGR of approximately 30%. Before I turn it As previously disclosed, we are continuing to ship some products to Huawei that are not subject to export administration regulations and entity list restrictions. We applied for and recently received all requested licenses that enable us to provide support for these products as well as qualify new products for Huawei's mobile and server businesses. Additionally, these licenses allow us to ship previously restricted products that we manufactured in the United States, which represent a very small portion of our sales. However, there are still some products outside of the Receiving the licenses is a positive development and we are thankful to the U. S. Administration for approving these licenses. Prior to receiving these licenses, entity less restrictions severely limited our ability to qualify new products at Huawei. Although we are now able to qualify new products with Huawei's mobile and server businesses, it will take some time before the qualifications are completed and contribute to revenue. Consequently, we do not expect these licenses to have I'll now turn it over to Dave to provide our financial Micron's FQ1 results were largely consistent with our expectations as market conditions continue to stabilize. During the quarter, DRAM price declines decelerated from recent quarters and we saw pricing improvements in NAND. Total company revenues grew sequentially and our total inventory declined in absolute terms. We generated positive free cash The results on today's call reflect our previously announced changes in NAND Depreciable Life to 7 years from 5 years. And the change in reporting from our previous disclosures, which classified all MCP and SSD revenues as NAND revenue. To a view now that desegregates these revenues into DRAM and NAND. The following DRAM and NAND growth figures use restated historical revenues for an apples to apples comparison. Total FQ1 revenue was approximately 5.1000000000 FQ1 DRAM revenue was $3,500,000,000, representing 67% of total revenue. DRAM revenue increased 2% sequentially and declined 41% year on year. Fit shipments grew approximately 10% sequentially and on a year on year basis were up in the mid-twenty percent range. ASP declined in the upper single digit percent range sequentially. DRAM revenues included $435,000,000 of revenues from MCPs and SSDs. FQ1 NAND revenue was approximately $1,400,000,000 or 28 percent of total revenue. Revenue was up 18 shipments grew in the mid teen percent range sequentially and in the mid 30% range year on year. And ASPs increased in the low single digits sequentially. Now turning to our revenue trends by business unit. Revenue for the Compute And Networking business unit was approximately $2,000,000,000, an increase of 4% sequentially and down 45% year over year. The sequential increase was driven by higher volumes and moderating ASP declines. Revenue for the mobile business unit was $1,500,000,000, up 4% sequentially and down 34% year over year. MCP revenues grew strongly during the quarter, driven by approximately 50% sequential growth in DRAM and NAND bits. Revenue for the storage business unit in FQ1 was $968,000,000, an increase of 14% from FQ4 and down 15% year over year. Sequential revenue growth was driven by SSD volume growth and ASP increases. Finally, revenue for the embedded business unit was $734,000,000, up 4% from FQ4 and down 21% from the prior year. Sequential revenue growth was mostly driven by the automotive market due to content The consolidated gross margin for FQ1 gross margins included approximately a 240 basis point negative impact or approximately $125,000,000, due to underutilization charges at the Lehigh fab. This came in slightly better than we guided to on last quarter's call, underutilization charges are expected to ramp higher in FQ2 as production volumes decline. We still expect the under utilization charges We have taken action to reduce our spending as these actions are implemented. Ultimately, these charges will be mitigated as our own 3 d Crosspoint products ramp into production over the coming years. Operating expenses were as we incurred higher than usual R and D expenses to qualify expenses for We now expect We continue to prudently control FQ1 operating income was $594,000,000, representing 12% of revenue. Operating margin was down 38 percentage points year over year and down 3 percentage points from Our FQ1 effective tax rate was 6.9 percent. We expect our tax rate to be approximately 5% for the remainder of the fiscal down from $0.56 in Turning to cash flows and capital spending, we generated $2,000,000,000 in cash from operations in representing 40 percent of revenue. During the quarter, net capital spending was approximately $1,900,000,000 down from approximately $2,000,000,000 in the range of $7,000,000,000 Q1 compared to $260,000,000 last quarter and approximately $2,300,000,000 in the year ago quarter. In FQ1, we repurchased 1,100,000 shares for $50,000,000. In addition, we deployed approximately $200,000,000 of cash to settle convertible note reductions in the quarter removing approximately 3,000,000 free cash flow towards repurchases. Days of inventory was 121. Down from 131 days in FQ4. Inventory ended the quarter at $4,900,000,000 down slightly from $5,100,000,000 at our inventory days have declined by approximately 15%. We expect inventory days to increase in fiscal Q2 due to seasonality and then begin to reduce of $8,300,000,000 liquidity in FQ1 to fund the closing of our acquisition of Intel stake in the IMFT joint venture. FQ1 ending total debt was $5,700,000,000, down slightly from the prior quarter. In addition to the retirement of IMFT's member debt, we use cash on hand to retire approximately $520,000,000 in principle of high yield debt. This was partially offset by the drawdown of our term loan facility to fund Our balance sheet is Last month, S and P upgraded Micron's credit rating to investment grade and now all three rating agencies rate Micron's credit as investment grade. Now turning to our financial outlook, as Sanjay mentioned, our outlook throughout our earnings commentary assumes that the macroeconomic environment and trade related issues will not impact demand. Micron's fiscal second quarter is the seasonally weakest quarter for the industry. And this limits our business opportunity within the quarter. Additionally in FQ2, pockets of supply tightness are limiting our bit shipments. Lehigh underutilization costs are going to step up and our cost reductions are likely to remain modest. However, we are encouraged by recent market trends and expect that FQ2 will be the bottom for our gross margins. As pricing, increasing mix of high value solutions and cost reductions drive better gross margins throughout the rest of fiscal and calendar 2020. We expect a gradual recovery to start in FQ3 and to continue into the seasonally stronger second half of calendar year. With that in mind, our non GAAP We expect revenue to be in of 27 percent plus or minus 150 basis points and operating expenses to be approximately $825,000,000 plus or minus $25,000,000. Interest and other income is expected to be approximately 0. Based on a share count of approximately 1,140,000,000 fully diluted shares, we expect EPS to be $0.35 or minus $0.06. As we approach the trough in this cycle, at the midpoint of our guidance, fiscal Q2 revenue will be 60% higher and gross margins 9 percentage points higher than in the prior trough, which occurred in the fiscal third quarter of 2016. Micron solid financial performance and investment grade balance sheet demonstrate that the new Micron is indeed structurally stronger with higher lows and better cross cycle revenue growth and profitability. I'll now turn the call over to Sanjay for closing remarks. Thank you, Dave. Micron is entering 2020 as a fundamentally stronger company. In an industry that is structurally transformed. Supply growth is moderating due to rising capital intensity and the slowing down of Moore's law. Demand drivers are more diversified than ever before, both in end markets and in variety of memory and storage solutions. This change in industry dynamics creates new opportunities for Micron to innovate and provide differentiated value to customers. Nascent Applications promised to further accelerate this diversification. Cloud growth continues at a best pace, driven by new use cases, and 5G networks are just beginning to proliferate and will usher in an age of true machine to machine communication. With billions of connected devices. And just a little further over the horizon, AI, Machine Learning And Autonomous Technologies will expand this potential even more. These trends are transforming every aspect of human life and driving secular growth in memory and storage. Micron's enhanced product portfolio, improved cost structure and talented team put us in an outstanding position to capitalize on the wealth opportunities ahead and create long term shareholder value. Thank Our first question comes from the line of Srini Padjuri of SMBC Nikko. Your line is open. Thank you. Sanjay, just a couple of questions. I guess first on the supply shortages that you talked about, could you please elaborate? Because on one hand, you're talking about some shortages. On the other hand, the inventories are going up, as we head into the next quarter. And then I have a follow-up. So as we said last time as well as in this earnings call that we have certain shortages in DRAM on the leading edge nodes And we have brought down our inventory here. Overall inventory down fairly fast as Dave pointed out. And we have seen strong growth in demand in DRAM on high quality, high density modules for servers as well as demand trends have continued to be pretty solid. So, shortages on the leading edge nodes on DRAM and on the NAND side, we have SSD demand growing up substantially And, our 96 layer products as we expand the portfolio are being qualified by customers We are seeing strong demand on our 64 layer node where we are actually seeing some shortages. And of course, as we mentioned, we some back end constraints as well. We have invested in back end capacity assembly and test capacity expansion and that's will assembly and test issues impacting some of our multi dive stack on the mobile solutions as well as SSD solutions, the assembly and test constraints will be eliminated largely by the end of fiscal second quarter. These are some of the things that are impacting some of the shortages, both in DRAM and on the NAND side. And again, the demand trends continue to be solid. Of course, in CQ1 BC seasonality. And yes, some of our inventory may go up at the end of fiscal Q2. But overall, our normal inventory days is around as we look ahead, is around 110 days And that's really a function of increasing complexity coming from the technology nodes, as well as as we shift toward high value solutions more SSDs, more multi chip packages, they take longer assembly and test times as well. So those are the ones that are contributing to some of the aspects of days of inventory that when we foresee in the future, we look at it as approximately 110 days. So industry environment in terms of demand continues to be solid, pockets of shortages building, all across the industry. Certainly, we are experiencing that and pricing trends overall in the industry, as you look ahead at 2020, we are optimistic about the improving pricing trends in the industry as well. Thank you. Our next question comes from the line of John Pitzer of Credit Suisse. Your line is open. Congratulations on the solid results. Sanjay, I wanted to talk a little bit about the CapEx guidance for this fiscal year. I think I understand the strategy around NAND to kind of constrain spending on the 1st generation of replacement gate where cost downs are de minimis and kind of weight to version 2.0, but I'm kind of curious as you think about the DRAM strategy especially given that demand came in much stronger than expected this year 20%. There were some of us that thought at the beginning of the year would be lucky to get to low double digit growth. How do we think about DRAM CapEx from here and your ability to kind of keep up with industry big growth. And I guess specifically my question is, how much leeway do you have in moving more of your mix of DRAM toward the leading edge node as a way to grow bits rather than just shrinking. Certainly, as we move our DRAM production to leading edge node, for example, through 1Z, where we mentioned that we did very well with ramping 1Z DRAM node in our mobile products during the quarter. So of course, those gave us a bit growth. It comes with the shrink capability and technology transitions are the best way to achieve ROI as well. What's important is that we are being extremely disciplined and prudent in terms of managing our, supply bit growth and we want to make sure that it's aligned with our bit demand growth as well as our long term objective is to have our supply bit growth CAGR to be aligned with the industry demand growth CAGR. We mentioned that in 2019, our DRAM supply growth somewhat below the industry supply growth and in fiscal year 2020, we in calendar year 2020, we see our supply growth to be somewhat above the industry supply growth. But all in all, our strategy is to have our supply growth CAGR to be aligned with the industry demand growth CAGR. We feel very good about when we look ahead at 2020, our supply overall position. And yes, I mean, we are experiencing certain shortages on leading nodes and we believe that some of these shortages in the industry as well as for us will continue in calendar year 2020 timeframe frankly, that's a good place to be at in terms of running the business because it helps you manage the best mix of the business as well in terms of revenue and profitability. Thank you. Our next question comes from CJ Muse of Evercore. Your line is open. Yes, hi, thanks for taking the question. I guess, a question on the DRAM demand side. You're outlining an outlook for 2015 or sorry, mid teens growth in 2020. And curious as you think about that number, how much of that I guess, relates to potential pull in of China demand, potential conservatism on your part. And within that, what kind of assumptions are you making around 5G handsets and continued cloud spending through 2020? Thank you. So, certainly, 5G will be a growth driver. We expect 5G, headset, smartphones, to be more weighted toward the second half of the calendar year. Cloud CapEx, as you have seen the reports from various major cloud providers, cloud CapEx continues to be healthy. A meaningful portion of that cloud CapEx goes into memory and storage and that continues to drive above the average industry, above average demand as a percentage versus the average of the total DRAM industry, and 5G phones, I think it's important to note that content continues to grow as we mentioned in our script. I mean, of course, 4G phones content continues to grow, but 5G phones are driving a step level function increase in the average content of both DRAM as well as NAND. And our estimation is that in calendar year 2020 approximately 200,000,000 of 5G smartphones to be sold on a global basis. So overall, when we look at the demand industry demand of mid teens that we have projected for calendar year 2020. Keep in mind, that is building upon calendar year 2019 where industry demand in the second half came in quite strong. And in fact, we upped our estimate of industry demand growth to approximately 20% for 2019. So you are working off a large demand larger than previously expected total bit shipments in 2019 obviously that has an impact on the percentage that we look at for 2020. But in terms of aggregate of bid demand, that continues to be, pretty solid in 2020 as well. And as we said, 2019 was a headwind in terms of demand and supply for the industry in 2020, we look at demand and supply balance as a tailwind for the industry. Thank you. Our next question comes from Aaron Rakers of Wells Fargo Securities. Your line is open. Yes. Thanks for taking the question. I guess just on the capital expenditure front, obviously you guys have talked about reiterating the CapEx but you're also on the Taiwan fab, you're noting that fab is capable of EUV. I know you've talked about that you don't need that through the one gamma node, but it kind of suggests that you are looking at EUV as potentially something that you're evaluating? Have you pulled in at all your thoughts on EUV and how do we think about that in the context of CapEx, not necessarily this year, but looking out into the subsequent year Thank you. So at this point, we are not providing guidance for any time frame beyond our fiscal year 2020 in terms of CapEx. But as we have always said, we have been evaluating EUV technology. We have carefully evaluated EUV technology in terms of determining our roadmap for DRAM. And as you noted, through VIAFET that through one gamma node, today we are in production with now, 1Z node starting production with 1Z and of course, volume production also a 1y node. So from 1y to 1Z, as we look ahead at the next few generations through, 1 alpha, 1 beta and 1 gamma generations, we see that multipatterning techniques along with immersion technology will serve us well in terms of achieving our cost objectives and having a highly cost competitive roadmap for us. So we have also said that we continue to evaluate EV and when we see it, appropriate for deployment in our DRAM production in terms of cost and efficiency of production, we will certainly be deploying it at a future time in that But at this point, we see our technology roadmap through one gamma node to be in a strong position while we remain encouraged. So seeing the improvement in EUV Productivity tool as well. But regarding CapEx, for future years, we'll obviously always manage it as a function of our supply growth expectations as well as as a function of technology and cost competitiveness and keeping our supply growth, as I said previously aligned with demand CAGR, that's how we will manage it. And we'll share those details with you at appropriate time in the future. Thank you. Our next question comes from Mark Delaney of Goldman Sachs. Your line is open. For taking the question. I was hoping to better understand the company's commentary on its own inventory, which is nice to see that come down in dollars and days in the completed quarter. As you think about your inventory as you move through the year, I understood some of the aggregate commentary, but can be a bit more specific because I think the company having carrying extra inventory of some of these older DRAM nodes, when do you think that gets used up? And when you talk about 110 days Sanjay, has that been on a more normal level of inventory. Just given because the company is going to be carrying the extra NAND inventory for the replacement gate node, should we be thinking about inventory running above 110 to allow for that this year or is the 110 really a this year comment as you carry some of that extra replacement gate inventory and as longer term, it's something lower than that. Thanks. Yes, that's a good question. Why don't I try to take a crack at that first? So, yeah, the comment around 110 days is kind of an optimal level of inventory, when we have worked off, all of the excess inventory associated with replacement gate transition and, as inventories normalize. So obviously in the 121 days of inventory that we have today, DRAM is a bit below that really what pulls it up to 121 is that NAND is quite a bit higher than that. By virtue of the fact that we are executing on this strategy to hold a lot of inventory as we go into our replacement gate transition, to augment what won't be a robust bit growth from that, that first node. You know, as Sanjay mentioned, we do expect days of inventory to go up a bit based on mix and so forth in the second quarter because of seasonality. But we would expect it then to start trending down. Over the next few quarters, partly as we start to utilize, this excess NAND inventory. Replacing the transition. And also as we start to digest and manage through the mix challenges that have created a little bit of excess still on the DRAM front, So we should be in pretty healthy place on DRAM within a couple of quarters. Thank you. Our next question comes from Ambrish Srivastava of BMO Capital Markets. As good to see you power through this downturn with positive free cash flow. I just wanted to get back to the comment that Sanjay you're making about the fiscal quarter marking the bottom for fundamentals. And CapEx seems to be a little bit front end loaded. So is free cash flow going to be positive in the fiscal second quarter as well? So I'll take a crack at that one too. I would say maybe to start with that the first priority of the company is to make the appropriate level investments, both in terms of R&D and which is why we we have had a little bit of an increase in operating expenses because we do want to put the right level of investment in new products, particularly high value solution products. That will ultimately be the big factor in terms of our performance over the coming years. And in addition, we obviously want to make the appropriate level in terms of CapEx investments to make sure that we are, as Sanjay mentioned, investing the right level to manage supply growth and to make these node transitions. Secondarily, of course, our goal is to generate good free cash flow. And ideally, it was it would be to generate pretty consistent free cash flow, over multiple or over every quarter. I would say in the second quarter, what we feel really confident about that cash flow from operations is going to be very strong. And we will again make appropriate level CapEx investment that could drive the free cash flow to be slightly negative or roughly around 0 or potentially even a little bit more positive. But we're going to make the capital investment be what's appropriate and let free cash flow go where it goes. I would say though just to put this in perspective, the trough quarter of 2016 in terms of free cash flow was negative $1,300,000,000, I believe. And so if you compare that to whatever we end up doing for the second quarter, This will be massively better in terms of cash flow generation. And of course, that's an indication of an example of how we have structurally improved the business from a cost competitive perspective and from a cash flow perspective. And indeed, if this does turn out to be the bottom as Sanjay indicated, is our expectation barring any sort of macro event or trade event. We would expect free cash flow to track more positively, through the remainder of the fiscal year and into the next fiscal year. So this year will be actually a pretty good year in terms of free cash flow. That'll be 4 consecutive years of positive significant positive free cash flow for the company, which of course has never been done in Micron's history. So, again, ideally, we'd like to have every quarter be positive or may not happen this quarter, but clearly, we're on the right track in terms of generating positive free cash flow for the company. Thank you. Our next question comes from Harlan Sur of JP Morgan. Your line is open. Good afternoon. Thanks for taking my question. We're seeing a strong reacceleration in cloud and hyperscale spending. Also seeing some near term strong server by the Asia OEMs. And it appears that the excess DRAM channel inventories in this segment have been worked on, but wanted to get your views here and typically the cloud spending upcycle duration is about 3 to 4 quarters. So even in a ceiling weaker period for PCs and smartphones, in the 1st part of next year. Do you see the server and data center demand remaining fairly strong? Yes. As we look ahead, we do see server and data center demand, particularly within cloud to be strong. We had as we mentioned in our FQ1, strong growth from cloud and we certainly see that happening through 2020 as well. As we mentioned, high densities are actually in shortage in the industry. And it really is about all the trend of more AI workloads, more need for need for memory and storage as CPUs get introduced that can work with higher density memory as well as have more channels, which is increasing the attach rate of DRAM content per server and increasing it So these are all the trends that actually point to continuing higher than industry average level of growth. For DRAMs in the cloud and server. And same thing on the NAND on the SSD front, average density as well as average usage of Flash, in cloud and data center applications continues to increase. And we have always said that this is the long term demand driver for memory and storage industry. And memory and storage is critical in terms of driving greater value in these cloud applications and in these enterprise applications. And hence you are seeing continuing strong growth in these end market segments. And I would just like to point out that even in 2019, while the demand to the suppliers was weaker in the first half of the year because the customers particularly in the space for using of the inventory that they had to meet end consumption. But it's important to understand that the end consumption of DRAM and NAND even in challenging 2019 periods continue to be healthy. And as we look ahead, this will be a strong driver of growth in industry. But I just want to point out that as we previously discussed, smartphones, content growth there, automotive applications, continuing to drive greater content, graphics, gaming consoles, new gaming consoles are also driving HDD replacement with SSDs as well as a greater DRAM content in those applications. So I think the demand drivers and our thesis that has always been there that the industry has strong demand drivers has very much been intact. And we look forward to good environment for our industry in 2020. Thank you. Our next question comes from David Wong of Instinet. Thanks very much. Could you tell us what proportion of DRAM bits are currently on 1 fee technology and what do you expect will be on 1 fee technology by the end of calendar 20? And what's the differences between cost per bit? And once you compare to 1y? So we don't provide cost details with respect to 1zversusoney or from one node to the other node. But as we have said before, that we expect our 1y+1z combined bit production to cross over our total bit production by summer of 2020. That means a bit crossover with 1y and 1z combined. By summer of 2020. And as we mentioned, we are doing well with our 1Z and in fact, in mobile products, as I mentioned in my prepared remarks, We saw the fastest ramp of ones we note in the history of our mobile presence. Great. Thanks. Thank you. Our next question comes from Joe Moore of Morgan Stanley. Your question please. Great. Thank you. I wanted to ask a bit more about the China inventory build that you talked about. Can you kind of talk about the reasons? Is it concern about ability to procure? Is it tariff related? What's the reason for the pull in? And any way you can help us kind of understand the magnitude would be helpful Thank you. As we have mentioned before, we saw some China buying pattern that was above normal compared to the past that we have seen. And we attribute that to some of the U. S.-China trade tensions and perhaps some of the customers in China procuring and be shifting to us, perhaps a longer term strategy of carrying more inventory because in terms of the U. S.-China trade aspects, while Phase 1 deal is definitely encouraging to see that is happening. But there is still ongoing for longer term lack of clarity. So perhaps some of the China customers have shifted their strategy towards getting higher levels of inventory. I would say that that perhaps is an important reason. There's of course Chinese New Year as well that can play a role in the China demand. Chinese New Year is earlier this year compared to the typical years. But there is no question that most important thing is that the underlying demand drivers are strong. And When you look at smartphone content growth that's happening in all smartphones across the globe, including the ones sold by the China manufacturers, The content both on DRAM and NAND side continues to increase. And certainly as we have talked about, 5G is, and the significant driver and certainly 5G phones are planned to be sold perhaps in the largest quantities in China first. So all of these underlying demand trends, I think, are the most important thing here as well. Thank you. Our next question comes from Blayne Curtis of Barclays. Your question please. Guys. Thanks for taking the question. Maybe Sanjay, just to follow on Joe's question. I'm just kind of curious, you said take a couple of quarters for Huawei to get back in the numbers. Are you embedding anything in the calendar 'twenty outlook you have? And I'm just kind of curious following on that point in terms of that you're expecting some moderation from China. Have you seen any signs of that yet? I'm sorry. I didn't quite get the last part of the question. Following on Joe's question, you're expecting some moderation after an inventory build. Have you seen it yet or is that just something you expect will happen at some point? The what we said is that in terms of our estimation of the industry, demand growth in calendar year 2020, we have baked in that some of the inventory that we may have seen China customers build, we have baked in that some of that will be consumed And inventory levels will be lower than what you may be thinking at this point with those customers over the course of calendar year 2020. And with respect to your first piece of the question on Huawei, we mentioned that now that we have received the licenses, we are able to work with them on new product qualifications. And as you know well, new product qualifications do take the few months, a couple of quarters before they get qualified into new platforms. And then we can potentially look at additional opportunities. But at this point, I mean, our focus is to resume that product qualification work both for server as well as mobile applications. Thank you. Our next question comes from Raja Gill of Needham And Company. Please go ahead. Yes, thanks and congrats as well as you weather through this cycle. Question on mix shift for NAND specifically. Sunjay, you had mentioned that next year you will be ramping at a higher rate, NVMe SSDs as well as UFS controllers in the China handset market. Could you talk a little bit about the trajectory of those products and how that positive mix shift in NAND will potentially affect overall margins? Thank you. I'll then have Dave comment on the margin piece of it. But certainly as we expand our portfolio, of NVMe solutions for from clients to data center and of course, certainly on the consumer side as well. We have done well as we reported for our FQ1 in terms of expanding the portfolio and capitalizing on increased sales of SSDs and we certainly look at gaining share throughout calendar 2020 as we expand our portfolio there I think what's important to note is that our share there is today underrepresented. So as we shift toward these higher value solutions with expanded portfolio, I mean, we are basically trying to bring our share in line with what it should be given our share of the total NAND bits. And this is the part of the strategy that we talked about in terms of shifting the mix of our high value solutions which now are at about 50% in terms of this toward higher number in the future. And of course, part of that ongoing shift is toward multi chip packages as well as discrete managed NAND solutions for mobile applications where we pointed out that on a year over year basis, we have increased our share by 50%. Yet we remain underrepresented and therein lies a further opportunity for to be increasing our share in these markets. So high value solutions is a very important part of our strategy. It enables us to gain greater stability, greater margin opportunity through the cycles as well as brings us closer to understanding the communication landscape with the customer. And I'm very pleased that Micron is executing quite well with respect to achieving our objectives. In this case, yeah. So obviously high value solutions is the reason. One of the major reasons for shifting the strategy to high value solutions is because they carry higher margins. And I'll just give you a data point. If you look back at fiscal 2019 and look at these high value solutions, relative to consumer components, you'll find the margins were about 30 points, 30 percentage points higher. So significantly higher opportunity to get higher margins. And of course, that obviously helps the overall margins of the company. Thank you. And our last question comes from the line of Hans Mosesmann of Rosenblatt Securities. Your line is open. Congratulations to the team for the execution. Sanjay, on the server and data center module dynamic, where you're seeing a higher a mix of quality or higher density. What was the density on average a year ago, just to get a rough and how that has improved. And what exactly is driving this move? Is it a new process or architecture? Is it market share gains? That would be helpful. Yeah, you know, in cloud servers as well as enterprise server, average densities, you know, around 300 gigabytes per server, average consumption of DRAM. And this trend is expected when you look at the CAGR over the next few years, expected to continue to grow in double digit range anywhere when you look at 'nineteen to 'twenty 2 kind of CAGR around 20% CAGR for average content growth, in servers in cloud and enterprise application So this is definitely a high growth area for the market. And when you look at the new CPUs, Cascade Lake and other new CPU starting in 2019. As I mentioned earlier, they support the usage of higher density chips That means they support usage of 16 gigabyte chips, as well as more channels in the new CPUs and that is definitely driving greater ability to use more content per server for DRAM. And of course, at the end of the day, it's about the workloads that applications are running. Those workloads are requiring increasing requirement for speed and that's translating into increasing requirement for memory as more and more real time data analytics kind of applications and AI applications are being run-in enterprise end data center and cloud applications. Great. And as a quick follow-up, can you give us a commentary regarding 3 d cross point used in main memory, if there's a road map for that this year this coming year? 3 d crosspoints, certainly as we said, exciting opportunity for us longer term, it definitely gives us differentiated opportunity with as the only company in the world having NAND DRAM and CD Crosspoint, we have just introduced our first storage product with 3d Crosspoint, the world's fastest SSD. And as you noted, I mean, 3d Crosspoint certainly has opportunities on the memory side of the business as well. And as we look at engaging with the ecosystem, as we look at developing our products, These are the kind of opportunities both on the memory semantic applications as well as storage side of the applications. We'll be addressing over the course of next few years as we expand our product portfolio in this area. But certainly, 3d Crosspoint, Again, these kinds of things, breakthrough technologies take multiple years and it required a lot of ecosystem work to get the full use of the technology and we are well on our way as we discussed at Micron Insight. And let me put the plug here again that if you have not watched it, Please do watch Sumith's presentation. I think it gives you a pretty good perspective on the capabilities of 3 d XPoint technology and our vision of the future with it. Thank you. Ladies and gentlemen, this concludes today's conference Call. Thank